R22150019 Hammer and chisel set in 1/3 foam module
R22150009 Wrenches set 1/2" in foam module
R22150008 Ratchet spanner with accessories 1/2" in 1/3 foam module
R22150015 Screwdriver set in 1/3 foam module
R22250000 Combination wrench set and offset screwdriver in 2/3 foam module
R93200025 Cutter blade with 5 spare blades
Product description
Spanner tools
Clutch according to DIN 3120, ISO 1174, with ball retention groove
Square drive according to DIN 3120, ISO 1174, with ball retention groove
2C reversible ratchet 1/2": According to DIN 3120 - A 12.5, ISO 1174, lever for right- and left-hand operation, push-button release, finely serrated, oval shape, 2-component handle
Open-end spanner extension 1/2"
Sliding T-bar 1/2", with slide, according to DIN 3122, ISO 3315
Universal joint 1/2": Installed joint, design according to DIN 3123 - C 12.5
Chrome vanadium steel, satin matt chrome-plated
Square drive in accordance with DIN 3120, ISO 1174, with ball retention groove
Open-end spanner, hexagonal: Metric, short, according to DIN 3124, ISO 272
Screwdriver bit socket spanner 1/2" for in-hex screws: Pressed-in, phosphated pin
Chrome vanadium steel, satin matt chrome plated
For hand-operated screw work
Combination spanner: According to DIN 3113, Form A ISO 3318, ISO 7738, ring side angle of 15°, mouth position, matt satin surface, plate-plated
Hexagonal wrench set: According to DIN ISO 2936, hardened, phosphated
Chrome vanadium steel
Water pump pliers: According to DIN 8976 Form C, length-sawn grip surfaces, box joint, 7 positions, chrome vanadium steel, powder-coated
Combination pliers: According to DIN ISO 5746, induction-hardened cutting edges, 2-component handle, forged
Curved nose telephone pliers: According to DIN ISO 5745, straight grip surfaces, length-sawed, induction-hardened cutting edges, 2-component handle, forged
Side cutters: According to DIN ISO 5749, slim head, induction-hardened, long cutting edges, 2-component handle, forged
Engineer's hammer: Forged hammer head made of hardened steel, induction-hardened striking surfaces, in accordance with DIN 1041, ash handle, paint-coated shaft, ring wedge
Flat cold chisel, flat oval: According to DIN, cutting edge and head ground, impact side hardened, chrome vanadium steel
Flat cross chisel, flat oval: According to DIN 6451, cutting edge, edges and head ground, impact side hardened, chrome vanadium steel
Hexagonal punch: According to DIN 6458, face hardened, chrome vanadium steel
Centre punch, hexagonal: According to DIN 7250, face hardened, chrome vanadium steel
Pin punch, octagonal: According to DIN 6450, face hardened, chrome vanadium steel
2C screwdriver slotted and PH: According to DIN, high-quality chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component handle, 5-edge grip head, extended hole in handle
