Allen key inset 1/4" hexagon: 4 4.5 5 5.5 6 7 8 9 10 11 12 13 14 mm
Bit box, 32 pcs.
Bit-Screwdriver 210 mm
Cardan joint 1/4" 33 mm
2 x 8" plug strip
Insert holder 1/4" + 1/2" for plug strip
Ring-ratchet open-end spanner set 8 9 10 11 12 13 14 15 17 19 mm
Screwdriver slot 3 4 5.5 6.5 mm
Screwdriver cross PH 1 2
Offset screwdriver set 1.5 2 2.5 3 4 5 6 8 10 mm
Combination pliers 180 mm
Combination pliers 200 mm
Flat nose pliers, straight 200 mm
Water pump pliers 10" 250 mm
Engineer's hammer 500 g
Flat chisel 150 mm
Centre punsh 4 mm | 120 mm
Pinpunsh 4 mm | 120 mm
Driftpunsh 4 mm | 150 mm
Cutter with sharpener 175 mm
Tape measure 5 m
Product description
Spanners: Clutch according to DIN 3120, ISO 1174, with ball retention slot
Square drive according to DIN 3120, ISO 1174, with ball retaining groove
2C reversible ratchet 1/4" + 1/2": lever for reversible operation with right- and left-handed operation, push-button release, fine toothed oval head, dual-material handle, force-friendly transfer, for sockets
Hexagon socket, metric, short, according to DIN 3124, ISO 2725
Socket spanner extension
Universal joint, screwed joint, design according to DIN 3123
For manual applications
Chrome-vanadium steel, matt satin chrome finish
Cap strip for mounting with insert holders for 1/2" sockets, aluminium
Ratchet wrench, metric: According to DIN 3113, ISO 3318, straight shape, jaw position 15°, surface satin chrome-plated, chrome-vanadium steel
Engineer's hammer: Forged hammer head made of hardened steel, induction-hardened striking surfaces, in accordance with DIN 1041, ash handle, painted shaft end, ring wedge
Combination pliers: According to DIN ISO 5746, gripping areas for flat and round material, induction-hardened cutting edges, 2-component handle, chrome vanadium steel
Power cutters: According to DIN ISO 5749, high cutting performance, induction-hardened, long cutting edges, 2-component handle, chrome vanadium steel
Curved nose pliers, straight: According to DIN ISO 5745, straight gripping sections, length wiper, induction-hardened cutting edges, 2-component handle, chrome vanadium steel
Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm graduation, with tape rewind and lock, magnetic stop, Accuracy class II
2C screwdriver: Slotted and cross-slotted PH, according to DIN, high-quality chrome-molybdenum steel blade, chrome-plated, phosphated drive tip, 2-component handle, 5-angle grip head, extended hole in handle
Hexagon Allen spanner: According to DIN ISO 2936, fully hardened, chrome vanadium steel, phosphated, in holder
Flat cold chisel, flat oval: According to DIN 6453, cutting edge and head ground, tip hardened, chrome vanadium steel
Water pump pliers: According to DIN 8976 Form C, length wiper gripping sections, box joint, 7 positions, chrome vanadium steel, powder-coated
Hexagonal punch: According to DIN 6458, stroke end tempered, chrome vanadium steel
Centre punch, hexagonal: According to DIN 7250, annealed tip, chrome vanadium steel
Pin punch, octagonal: According to DIN 6450, annealed tip, chrome vanadium steel
Stanley knife: Blade 18 mm, synthetic housing, metal blade guide, one-hand operation, 5 spare blades (100mm long, 0.4mm thick), with sharpener
Bit box: Drive adapter with magnetic bit lock, hexagon drive according to DIN 3126 ISO 1173 - C 6.3, machine-operated, phosphated, plastic box
Bit screwdriver: 2-component handle, hexagonal recess drive in accordance with DIN 3126 - D 6.3 (1/4") for bits, magnet, extended hole in handle, chrome vanadium steel
