- Length: 381 mm
- Drive profile size: 1/2"
Gedore hinged handles, T-wrenches and angled handles from 1/4" to 3/4"
Socket handles drive sockets where a ratchet is not needed or gives too little leverage, for example when breaking loose a seized bolt. Gedore makes them for 1/4", 3/8", 1/2" and 3/4" drives, so you pick the handle by the square drive of your sockets.
A handle with knee joint, also called a hinged handle, puts the socket to work at any angle; its length sets the leverage, from 254 mm in 3/8" to 980 mm in 3/4". A T-wrench is turned with both hands for an even pull. An angled handle gives a fixed leverage point in a compact shape. For work on live installations there are VDE T-handles in 1/2", with a locking bolt or a trigger lock that holds the socket in place.
An SE 9x12 insertion grip and a loose sliding handle as a spare part complete the range. Combine a handle with Gedore socket extensions in 1/4", 1/2" and 3/4" to reach recessed bolts; adapters and joints sit with the other Gedore reducers, adapters and joints for sockets.
- Length: 140 mm
- Drive profile size: 1/4"
- Length: 547 mm
- Drive profile size: 3/4"
- Length: 255 mm
- Drive profile size: 1/2"
- Length: 300 mm
- Drive profile size: 1/4"
- Length: 220 mm
- Drive profile size: 1/2"
- Length: 254 mm
- Drive profile size: 3/8"
- Length: 460 mm
- Drive profile size: 1/2"
- Length: 180 mm
- Drive profile size: 3/8"
- Length: 267 mm
- Drive profile size: 9 x 12 mm
- Length: 700 mm
- Drive profile size: 1"
- Length: 450 mm
- With cardan joint: Yes
- VDE approved: No