- Effective length: 210 mm
- Connection size: 1/2"
Gedore puller parts: spindles, hooks, counter brackets and hydraulics
Gedore spindles, puller hooks, counter brackets and hydraulics keep pullers working and extend them to heavier jobs. A worn spindle or a hook that is too short is replaced on its own, without buying a new puller.
Choose a spindle by diameter, thread and length: there are 22 mm spindles with G 1/2" in 210 and 350 mm, also with a ball tip, and 19 mm spindles with M18x1.5. Puller hooks run from 100 to 400 mm; versions with quick-adjustment clamps are set to size faster, and an extension piece with hook brake adds reach without the hook slipping. The 226 mm pulling bars with spacer come in fours.
Counter brackets go with the 1.30 inner pullers: one version for 1.30/0 to 1.30/5, another for 1.30/6 and 1.30/7. Where hand force falls short, a 12 t hydraulic spindle takes the place of the mechanical spindle, and a 15 t hydraulic press pushes bearings and bushes in or out. The pullers themselves sit among the Gedore universal pullers and inner pullers, within Gedore pullers and puller sets.
- Effective length: 350 mm
- Connection size: 1/2"
- Effective length: 210 mm
- Connection size: 1/2"
- Effective length: 80 mm
- Connection size: M18 x 1,5
- Effective length: 205 mm
- Hydraulical: Yes
- Connection size: 3/4"
- Overall length: 100 mm
- Length: 300 mm
- Length: 100 mm
- Length: 236 mm
- Length: 235 mm
- Length: 100 mm
- Length: 400 mm
- Effective length: 210 mm
- Connection size: M14
- Length: 150 mm
- Effective length: 280 mm
- Connection size: 3/4"