r: 08107175 p: 1155.647 pid: 74242 b: FLUKE q: 0 st: lt: 8 ean: 0195112042908 sr: FLUKE 5347993 sr_no_br: 5347993 sr_no_br_cl: 5347993 sr_cl: FLUKE5347993 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FEV300/TY1 & TY2 Test adapter set for electric vehicle charging station: Connectors type 1 and 2 - 5347993 cn: ACCESSORY/PART INSTALLATION TESTER cn2: ACCESSORY/PART INSTALLATION TESTER cn_clear: ACCESSORYPARTINSTALLATIONTESTER d: Product description Simulate current capacities of charging cables Simulate charging status of different vehicles Simulate ground fault Includes vehicle connectors with type 1 and type 2 plugs Test in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722 The FEV300 test adapter set with type 1 and type 2 connectors is designed to test the operation and safety of charging stations, mode 3, for charging AC traction batteries. The adapter imitates an electric vehicle and starts a charging cycle, activating the voltage/current output, allowing you to perform tests in combination with suitable measuring instruments such as an installation tester (Fluke 1664 FC) and/or an oscilloscope (Fluke 120B series). With the adapter set, charging stations can be tested in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722. PP status (Proximity Pilot) 'cable simulation': the rotary switch for the PP status allows the adapter to simulate different current capabilities of the charging cables CP-status (Control Pilot) 'vehicle simulation': the rotary switch for the CP-status can be used to simulate different charging statuses Simulation of CP fault "E" and simulation of PE fault ("earth fault") Two different connectors Use the FEV300-CON-TY1 Type 1 connector to connect to an EV charging station with a Type 1 with vehicle connector. Use the FEV300-CON-TY2 Type 2 plug to connect to an EV charging station Type 2 with a wall outlet or connect to an EV charging station Type 2 with a vehicle connector. Simplicity and convenience Perform various tests including earth fault checks, wire insulation, voltage measurement and duty cycle to see the max current available for charging an all-in-one adapter that can be safely integrated into the Fluke portfolio of test and measurement tools. With the FEV300, you can simulate CP fault (E) and PE fault (earth fault) and it offers separate phase indication with three LED lights to easily check if voltage is present. No need to bring an electric vehicle on site for fault finding at the charging station: the adapter acts as an electric vehicle when connected to a charging station for easy performance and maintenance testing. Suitable for Fluke 1662 multifunction installation tester Fluke 1663 multifunction installation tester Fluke 1664 FC multifunction installation tester Fluke 87 V digital multimeter Fluke 120B industrial ScopeMeter series handheld oscilloscopes Fluke 1587 FC insulation multimeter Fluke 1732 and 1734 three-phase electrical energy loggers Fluke 1735 three-phase power logger Fluke 1736 and 1738 three-phase Power Quality Loggers ds: dsc: Scope of delivery FEV300/BASIC test adapter FEV300-CON-TY1 Type 1 plug FEV300-CON-TY2 Type 2 plug Carrying bag kts: Test adapter set for electric vehicle charging station: Connectors type 1 and 2 kpn: FEV300/TY1 & TY2 kpn_dash: kpn_clear: FEV300TY1TY2 bkpn: FLUKE FEV300/TY1 & TY2 bkpn_clear: FLUKE FEV300TY1TY2 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessory/part installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessory/part installation tester sr_no_br_cl_ns: 5347993 sr_ns: FLUKE5347993
r: 03330062 p: 1155.276 pid: 166160 b: FLUKE q: 0 st: lt: 8 ean: 0095969617970 sr: FLUKE 4124364 sr_no_br: 4124364 sr_no_br_cl: 4124364 sr_cl: FLUKE4124364 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. working pressure 40 bar Connection size 1/4" n: FLUKE 700PTPK pneumatic test pressure kit 0 to 41 bar in case - 4124364 cn: PRESSURE TEST PUMP cn2: PRESSURE TEST PUMP cn_clear: PRESSURETESTPUMP d: Product Description User-friendly, robust and reliable design capable of generating pneumatic pressures from -0.87 bar (-12.7 psi) to 41 bar (600 psi) Combine it with one of the Fluke 700G precision pressure gauges for a complete pressure measurement and calibration solution Also combine with the Fluke 700G/TRACK software that lets you upload more than 8000 pressure measurements recorded in the field to a PC ds: dsc: Scope of delivery Pneumatic test pump 2 plug-in hose couplings Hose 1m Seal set Adapter 1/4" NPT female to 1/4" BSP male Adapter 1/8" NPT female to 1/4" BSP female Robust carrying case kts: pneumatic test pressure kit 0 to 41 bar in case kpn: 700PTPK kpn_dash: kpn_clear: 700PTPK bkpn: FLUKE 700PTPK bkpn_clear: FLUKE 700PTPK c_path: Home / Tools / Measuring and inspection technique / Analogue measuring and inspection instruments / Analogue measuring instruments / Pressure test pump | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke analogue measuring and inspection instruments / Fluke analogue measuring instruments / Fluke pressure test pump sr_no_br_cl_ns: 4124364 sr_ns: FLUKE4124364
r: 08107147 p: 1141.818 pid: 71820 b: FLUKE q: 0 st: lt: 8 ean: 0195112035016 sr: FLUKE 5315194 sr_no_br: 5315194 sr_no_br_cl: 5315194 sr_cl: FLUKE5315194 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TRUTEST-LITE-M5 software licence code for TruTest Lite (5 workstations) - 5315194 cn: SOFTWARE cn2: SOFTWARE cn_clear: SOFTWARE d: Product description Easily manage measurement data, including installation and commissioning tests for solar sites through an intuitive and modern interface Quickly create test certificates and reports Free updates for 5 years after installation Easy data collection and database transfers Includes The ability to deploy TruTest on 5 workstations The ability to assign 2 users to each of the 5 TruTest workstations The easy-to-use data management solution The Fluke TruTest software is designed to eliminate the problems associated with traditional data management and reporting of electrical systems. Whether you are testing installations with fixed wiring or devices in an office, checking repair results in a workshop or performing annual inspections, good data management is essential for creating understandable reports for customers. Compatible with a growing number of test and measurement instruments from Fluke and Beha-Amprobe. TruTest software allows you to quickly and easily import measurement results directly from your measuring instruments, manage files transferred from instruments or manually enter data if required. With a streamlined user interface and intuitive workflow, measurement data can be easily formatted into printable test certificates and reports, complete with your company logo and electronic signature. Solar reporting solution Fluke TruTest software now supports the SMFT-1000 multifunction PV tester and performance analyser. Whether you are analysing panel efficiency via I-V curves or testing the system for safety via the Category 1 test regime in accordance with IEC 62446-1, good data management is crucial for producing easy-to-understand reports for customers. Import measurement results directly from your multifunction solar tester to the computer, organise and analyse the data, compare individual device data with previously imported measurements and deliver a comprehensive and visual customer report. Streamlined data management Manage test results and customer and location data with ease and quickly create reports with the intuitive user interface and report builder. Create customised automatic tests Choose from predefined automatic test codes or create your own to ensure technicians collect the right data at the right location. Dashboard interface With the live intuitive on-screen dashboard interface, users can instantly see the status of all their clients and navigate to detail level if required. Compatibility Fluke SMFT-1000 Fluke 6500 Fluke 6500-2 Beha-Amprobe GT-600 Beha-Amprobe GT-650 Beha-Amprobe GT-800 Beha-Amprobe GT-900 Fluke 1653 Fluke 1653B Fluke 1654B Fluke 1662 Fluke 1663 Fluke 1664 FC Beha-Amprobe ProInstall-100 Beha-Amprobe ProInstall-200 Databases from the Fluke DMS software or the Beha-Amprobe ES control software can also be converted and transferred to the TruTest software platform*. Microsoft Access Runtime 2016 is required for the DMS/EsControl database conversion. Comprehensive reporting Fluke's TruTest software simplifies the reporting process, allowing you to generate easy-to-understand test certificates and reports as quickly as possible, saving you time and money. A growing list of regional reports, including DIN VDE 0701-0702, ÖVE/ÖNORM E 8701, SNR 462638, NEN3140, IEC 62446-1 and EU directive 2009/104/EC (BetrSichV). All these reports are available at the touch of a button, and a preconfigured international template ensures that the TruTest software covers every location. Structure topology Hierarchical tree topology is used to represent clients, locations and devices. This makes the application ideal for use in larger networks, while keeping you flexible in terms of testing and reporting. Each element is displayed as a single structure node and the properties of each node are displayed after selecting it. The tree topology can be maintained by adding, deleting, copying and/or editing nodes and copying sub-trees. ds: dsc: kts: software licence code for TruTest Lite (5 workstations) kpn: TRUTEST-LITE-M5 kpn_dash: TRUTEST kpn_clear: TRUTESTLITEM5 bkpn: FLUKE TRUTEST-LITE-M5 bkpn_clear: FLUKE TRUTESTLITEM5 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Software | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke software sr_no_br_cl_ns: 5315194 sr_ns: FLUKE5315194
r: 02958316 p: 1128.719 pid: 73653 b: FLUKE q: 0 st: lt: 8 ean: 0095969799652 sr: FLUKE 4699316 sr_no_br: 4699316 sr_no_br_cl: 4699316 sr_cl: FLUKE4699316 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 100000 µF Max. frequency 1000 kHz Max. resistance 500 MOhm n: FLUKE 287/FVF/IR3000 combination kit 287 multimeter + View Forms software (with ir3000 FC connector) - 4699316 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Achieve maximum productivity with the combination kit of the Fluke 287 and FlukeView Forms software. The Fluke 287 with its built-in data logger and TrendCapture feature lets you detect hard-to-find, intermittent faults by monitoring certain equipment functions while performing other work in the meantime. With the FlukeView Forms software, you can overlay data from six different meters or time periods to demonstrate cause-and-effect relationships or for condition monitoring purposes. Turn your data into clear graphs and tables, for professional reporting or for analysing individual readings or series of readings.The 287 is compatible with the Fluke ir3000 FC infrared connector, so you can share live readings on your iOS or Android device using the Fluke Connect Mobile App. The 287/FVF combination kit, which now includes the ir3000 FC connector, gives you a practical and affordable option of performing predictive maintenance. Key features: NEW ? Now compatible with Fluke Connect Mobile App and all Fluke FC-enabled measuring instruments with optional ir3000 FC infrared connector (sold separately). NEW ? Instantly show your team what you see, with the ShareLive video call feature (Fluke Connect Mobile App and ir3000 FC wireless connector required). TrendCapture quickly graphically displays a logged data session to quickly determine if anomalies have occurred. Zooming in on trends offers unprecedented possibilities for viewing and analysing TrendCapture data; up to 14 times zoom in. The selectable AC filter (smoothing mode) allows a more stable reading to be displayed when the input signal changes rapidly or contains a lot of noise. Adjustable recording thresholds and Auto Hold by defining a percentage change for measurements at the start of a new event. Large 1/4 VGA display up to 50,000 counts, with white backlight. Multiple sets of measurement information can be displayed simultaneously. Log function with extended memory for independent monitoring of signals for a defined period of time. With the integrated TrendCapture function, you can view a graphical display of captured measurement values without a PC. Store up to as many as 15,000 recorded events. Further features Internal help screens for measurement functions. You can store and name measured values on site and recall them later. Multilingual interface. Multiple logging sessions possible without downloading. DC base accuracy of 0.025%. AC voltage bandwidth 100 kHz. Real-time clock for automatic time stamping of stored measured values. True-RMS AC voltage and current for accurate measurements for complex signals or non-linear loads. AC bandwidth specified up to 100 kHz. Measures up to 10 A (20 A for 30 seconds). Capacitance range 100 mF. Temperature function. Relative mode for eliminating test lead resistance when measuring low-resistance or capacitance values. Peak recording for recording transients at rates up to 250 ?s. Premium measurement leads and crocodile clips included. Banana plugs included. With the FlukeView Forms software, you can document, store and analyse individual readings or a series of readings, then turn them into professional-looking documents. With the optional magnetic hanging clip, you can hang the meter so you can easily view it while keeping your hands free for work. ds: dsc: Scope of delivery Fluke-287 True-RMS electronic multimeter with logging function and TrendCapture FlukeView Forms software and cable 80BK-A thermocouple probe CAT III 1000 V 10 A modular test leads (red and black) CAT II 1000 V 10 A modular measuring probes (red and black) and caps CAT III 1000 V 10 A crocodile clips (red and black) C280 carrying case to protect the instrument and store accessories Set of banana plugs TPAK magnet pendant for hands-free use Fluke ir3000 FC infrared connector for Fluke Connect communication kts: combination kit 287 multimeter + View Forms software (with ir3000 FC connector) kpn: 287/FVF/IR3000 kpn_dash: kpn_clear: 287FVFIR3000 bkpn: FLUKE 287/FVF/IR3000 bkpn_clear: FLUKE 287FVFIR3000 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4699316 sr_ns: FLUKE4699316
r: 01041747 p: 1127.337 pid: 96400 b: FLUKE q: 0 st: lt: 10 ean: 0095969355315 sr: FLUKE 2679822 sr_no_br: 2679822 sr_no_br_cl: 2679822 sr_cl: FLUKE2679822 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 922 airflow meter/micromanometer - 2679822 cn: AIRFLOW METER cn2: AIRFLOW METER cn_clear: AIRFLOWMETER d: Product description: Modern HVAC technicians want a simple solution for investigating ventilation system problems. Differential pressure measurements are only part of the story. Technicians also want to measure air velocity and air flow, without having to use expensive, cumbersome, specialist instruments. The Fluke 922 makes it easy for you to make airflow measurements by combining three instruments: you can now measure differential pressure, airflow and air velocity with one rugged meter. Key features The Fluke 922 is designed and built for how (and where) you do your job, with performance, ruggedness and ease of use that sets it apart from the competition. The bright white display, rugged holster and wrist strap allow you to use the Fluke 922 even in less than ideal conditions. The colour-coded hoses help you determine the origin of your measurements. The simple, intuitive interface allows you to measure pressure, air velocity or airflow with just the push of a button. The Fluke 922 helps you easily analyse airflow. Use the Fluke 922 to measure pressure loss in HVAC equipment at the touch of a button to increase peak performance and extend equipment life match ventilation to the number of people present monitor the pressure ratio between indoor and outdoor air and manage the building envelope promoting indoor comfort and air quality taking measurements in air ducts for accurate airflow measurements ds: dsc: Scope of delivery 922 airflow meter Two rubber hoses Four 1.5 V AA alkaline batteries User manual Carrying case kts: airflow meter/micromanometer kpn: 922 kpn_dash: kpn_clear: 922 bkpn: FLUKE 922 bkpn_clear: FLUKE 922 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Airflow meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke airflow meter sr_no_br_cl_ns: 2679822 sr_ns: FLUKE2679822
r: 02957535 p: 1108.211 pid: 71555 b: FLUKE q: 0 st: lt: 8 ean: 0095969786775 sr: FLUKE 4637430 sr_no_br: 4637430 sr_no_br_cl: 4637430 sr_cl: FLUKE4637430 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE i17XX-FLEX6000/4PK iFlex current clamp 6000 A AC, 61 cm (4 pcs) - 4637430 cn: CURRENT CLAMP cn2: CURRENT CLAMP cn_clear: CURRENTCLAMP d: Product description: The Fluke 17XX 12-inch iFlex flexible current clamps extend the measurement range of the Fluke 17XX Energy or Power Logger to 6000 A AC while providing ultimate flexibility during measurement. The iFlex current clamps connect directly to the Logger and display current measurement values without error-prone scale factors. The 1.80 m (6 ft) long cord allows the Energy Logger to be removed from the measurement point, simplifying the reading of the display. ds: dsc: kts: iFlex current clamp 6000 A AC, 61 cm (4 pcs) kpn: i17XX-FLEX6000/4PK kpn_dash: i17XX kpn_clear: i17XXFLEX60004PK bkpn: FLUKE i17XX-FLEX6000/4PK bkpn_clear: FLUKE i17XXFLEX60004PK c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Current clamp | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke current clamp sr_no_br_cl_ns: 4637430 sr_ns: FLUKE4637430
r: 08121707 p: 1089.226 pid: 166248 b: FLUKE q: 0 st: lt: 8 ean: 0095969393539 sr: FLUKE 2802385 sr_no_br: 2802385 sr_no_br_cl: 2802385 sr_cl: FLUKE2802385 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Low battery message No Automatic shut-off No With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity No Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. frequency 1000 kHz Max. resistance 100 MOhm n: FLUKE 8808A multimeter 5.5 digit, 240V - 2802385 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description The Fluke 8808A multimeter has a wide functional range and measures voltage, resistance and current with a basic accuracy for DC voltage of 0.015 %. The meter is user-friendly and equipped with innovative features for routine testing and 4-wire precision resistance measurements Resolution of 5.5 digits Accuracy down to 0.015% Sensitive DC leakage current ranges Setting keys on front panel TL2X4 wire measurement method ds: dsc: Scope of delivery 8808A Precision Multimeter Red test lead with cap Black test lead with cap Power cord 1x USB-to-RS232 Adapter Cable (in bag) USB Driver Mini-CD (in case, in pocket) Manual FlukeView Forms Information Package (shrink-wrapped) Product manual CD China RoHS Sheet Fluke Registration Card WEEE Sheet ISO 9001 Sheet IEC Conformity Sheet kts: multimeter 5.5 digit, 240V kpn: 8808A kpn_dash: kpn_clear: 8808A bkpn: FLUKE 8808A bkpn_clear: FLUKE 8808A c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 2802385 sr_ns: FLUKE2802385
r: 03246715 p: 1075.489 pid: 72372 b: FLUKE q: 0 st: lt: 8 ean: 0095969611121 sr: FLUKE 4097622 sr_no_br: 4097622 sr_no_br_cl: 4097622 sr_cl: FLUKE4097622 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 700G31 precision pressure test gauge 10,000 pSIG - 4097622 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description Precision pressure gauge calibrators designed for fast and accurate test results Make precise pressure measurements from 10 inH2O/20 mbar to 10,000 psi/690 bar Highly accurate; 0.05 % measurement uncertainty in 1 year Easy to read in most environments with a bright backlit screen Take your gauge anywhere with a rugged protective holster Designed for pressure calibration in the field, Fluke 700G series pressure gauge calibrators offer you the performance and durability you have come to expect from Fluke pressure calibration products, while being simple and easy to use. Whether you want to connect to a hydraulic or pneumatic test pump, this series is intended as a complete calibration solution with 23 pressure gauges from 10 inH2O/20 mbar to 10,000 psi/690 bar. With a standard accuracy of 0.05% on the full scale and reference standard gauges with accuracies of 0.04%, you will definitely find a gauge that fits your application exactly. Measurement and data logging The Fluke 700G series of meters and pump sets are designed for pressure experts working with process pressure instruments. The pressure ranges of the 700G series gauges cover the ranges needed to meet process pressure calibration requirements, including atmospheric pressure +/- 10 inH20 (+/- 25 mbar) to 10,000 psi (0-690 bar), absolute pressure from 0 to 15 psi (0-1 bar) to 0-300 psi (0-20 bar) and reference thermometers from 0 to 30 psi (0-2 bar) to 10,000 psi (0-690 bar). Standard accuracy to 0.05 % of full scale Reference thermometers offer accuracy of 0.04 % of gauge reading Record more than 8,493 pressure readings in memory, which can be uploaded to a PC (with 700G/TRACK software) Robust design certified Intrinsically Safe Robust sealed IP-67 housing including protective holster Ensures you can work safely in explosive environments CSA: Class 1, div. 2, groups A-D ATEX: II 3 G Ex ic IIB T6 Gc 3-year warranty as standard User-friendly pressure solution Pressure gauge calibrators are the easiest pressure calibration tools to use. Switch them on, connect them to the pressure device you want to measure, and watch your reading - it's that simple. When combined with a Fluke-700PTPK pneumatic or 700HTPK hydraulic pump set, the 700G becomes a complete pressure source and measurement solution. The 700PTPK2 and 700HTPK2 premium pump sets offer easy connection to the gauge and the device under test, with connections that require no tools. Complete pressure calibration solution when meters are combined with dedicated pump sets Calibrate up to 600 psi (20 bar) with the pneumatic pump set 700PTPK or 700PTPK2. Calibrate up to 10,000 psi (690 bar) with the hydraulic pump set 700HTPK or 700HTPK2. ds: dsc: Scope of delivery Manual on CD-ROM in 14 languages Traceable calibration certificate Adapter 1/4" NPT to 1/4" ISO kts: precision pressure test gauge 10,000 pSIG kpn: 700G31 kpn_dash: kpn_clear: 700G31 bkpn: FLUKE 700G31 bkpn_clear: FLUKE 700G31 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4097622 sr_ns: FLUKE4097622
r: 08106948 p: 1075.489 pid: 72104 b: FLUKE q: 0 st: lt: 8 ean: 0095969674140 sr: FLUKE 4353561 sr_no_br: 4353561 sr_no_br_cl: 4353561 sr_cl: FLUKE4353561 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 700GA6 precision pressure test gauge 100 PSIA - 4353561 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description Precision pressure gauge calibrators designed for fast and accurate test results Make precise pressure measurements from 10 inH2O/20 mbar to 10,000 psi/690 bar Highly accurate; 0.05 % measurement uncertainty in 1 year Easy to read in most environments with a bright backlit screen Take your gauge anywhere with a rugged protective holster Designed for pressure calibration in the field, Fluke 700G series pressure gauge calibrators offer you the performance and durability you have come to expect from Fluke pressure calibration products, while being simple and easy to use. Whether you want to connect to a hydraulic or pneumatic test pump, this series is intended as a complete calibration solution with 23 pressure gauges from 10 inH2O/20 mbar to 10,000 psi/690 bar. With a standard accuracy of 0.05% on the full scale and reference standard gauges with accuracies of 0.04%, you will definitely find a gauge that fits your application exactly. Measurement and data logging The Fluke 700G series of meters and pump sets are designed for pressure experts working with process pressure instruments. The pressure ranges of the 700G series gauges cover the ranges needed to meet process pressure calibration requirements, including atmospheric pressure +/- 10 inH20 (+/- 25 mbar) to 10,000 psi (0-690 bar), absolute pressure from 0 to 15 psi (0-1 bar) to 0-300 psi (0-20 bar) and reference thermometers from 0 to 30 psi (0-2 bar) to 10,000 psi (0-690 bar). Standard accuracy to 0.05 % of full scale Reference thermometers offer accuracy of 0.04 % of gauge reading Record more than 8,493 pressure readings in memory, which can be uploaded to a PC (with 700G/TRACK software) Robust design certified Intrinsically Safe Robust sealed IP-67 housing including protective holster Ensures you can work safely in explosive environments CSA: Class 1, div. 2, groups A-D ATEX: II 3 G Ex ic IIB T6 Gc 3-year warranty as standard User-friendly pressure solution Pressure gauge calibrators are the easiest pressure calibration tools to use. Switch them on, connect them to the pressure device you want to measure, and watch your reading - it's that simple. When combined with a Fluke-700PTPK pneumatic or 700HTPK hydraulic pump set, the 700G becomes a complete pressure source and measurement solution. The 700PTPK2 and 700HTPK2 premium pump sets offer easy connection to the gauge and the device under test, with connections that require no tools. Complete pressure calibration solution when meters are combined with dedicated pump sets Calibrate up to 600 psi (20 bar) with the pneumatic pump set 700PTPK or 700PTPK2. Calibrate up to 10,000 psi (690 bar) with the hydraulic pump set 700HTPK or 700HTPK2. ds: dsc: Scope of delivery Manual on CD-ROM in 14 languages Traceable calibration certificate Adapter 1/4" NPT to 1/4" ISO kts: precision pressure test gauge 100 PSIA kpn: 700GA6 kpn_dash: kpn_clear: 700GA6 bkpn: FLUKE 700GA6 bkpn_clear: FLUKE 700GA6 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353561 sr_ns: FLUKE4353561
r: 03013108 p: 1075.489 pid: 71471 b: FLUKE q: 0 st: lt: 8 ean: 0095969674232 sr: FLUKE 4353654 sr_no_br: 4353654 sr_no_br_cl: 4353654 sr_cl: FLUKE4353654 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 700G10 precision pressure test gauge 2000 PSIG - 4353654 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description Precision pressure gauge calibrators designed for fast and accurate test results Make precise pressure measurements from 10 inH2O/20 mbar to 10,000 psi/690 bar Highly accurate; 0.05 % measurement uncertainty in 1 year Easy to read in most environments with a bright backlit screen Take your gauge anywhere with a rugged protective holster Designed for pressure calibration in the field, Fluke 700G series pressure gauge calibrators offer you the performance and durability you have come to expect from Fluke pressure calibration products, while being simple and easy to use. Whether you want to connect to a hydraulic or pneumatic test pump, this series is intended as a complete calibration solution with 23 pressure gauges from 10 inH2O/20 mbar to 10,000 psi/690 bar. With a standard accuracy of 0.05% on the full scale and reference standard gauges with accuracies of 0.04%, you will definitely find a gauge that fits your application exactly. Measurement and data logging The Fluke 700G series of meters and pump sets are designed for pressure experts working with process pressure instruments. The pressure ranges of the 700G series gauges cover the ranges needed to meet process pressure calibration requirements, including atmospheric pressure +/- 10 inH20 (+/- 25 mbar) to 10,000 psi (0-690 bar), absolute pressure from 0 to 15 psi (0-1 bar) to 0-300 psi (0-20 bar) and reference thermometers from 0 to 30 psi (0-2 bar) to 10,000 psi (0-690 bar). Standard accuracy to 0.05 % of full scale Reference thermometers offer accuracy of 0.04 % of gauge reading Record more than 8,493 pressure readings in memory, which can be uploaded to a PC (with 700G/TRACK software) Robust design certified Intrinsically Safe Robust sealed IP-67 housing including protective holster Ensures you can work safely in explosive environments CSA: Class 1, div. 2, groups A-D ATEX: II 3 G Ex ic IIB T6 Gc 3-year warranty as standard User-friendly pressure solution Pressure gauge calibrators are the easiest pressure calibration tools to use. Switch them on, connect them to the pressure device you want to measure, and watch your reading - it's that simple. When combined with a Fluke-700PTPK pneumatic or 700HTPK hydraulic pump set, the 700G becomes a complete pressure source and measurement solution. The 700PTPK2 and 700HTPK2 premium pump sets offer easy connection to the gauge and the device under test, with connections that require no tools. Complete pressure calibration solution when meters are combined with dedicated pump sets Calibrate up to 600 psi (20 bar) with the pneumatic pump set 700PTPK or 700PTPK2. Calibrate up to 10,000 psi (690 bar) with the hydraulic pump set 700HTPK or 700HTPK2. ds: dsc: Scope of delivery Manual on CD-ROM in 14 languages Traceable calibration certificate Adapter 1/4" NPT to 1/4" ISO kts: precision pressure test gauge 2000 PSIG kpn: 700G10 kpn_dash: kpn_clear: 700G10 bkpn: FLUKE 700G10 bkpn_clear: FLUKE 700G10 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353654 sr_ns: FLUKE4353654
r: 08107052 p: 1075.489 pid: 72131 b: FLUKE q: 0 st: lt: 8 ean: 0095969611060 sr: FLUKE 4097538 sr_no_br: 4097538 sr_no_br_cl: 4097538 sr_cl: FLUKE4097538 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 700G06 precision pressure test gauge 100 PSIG - 4097538 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description Precision pressure gauge calibrators designed for fast and accurate test results Make precise pressure measurements from 10 inH2O/20 mbar to 10,000 psi/690 bar Highly accurate; 0.05 % measurement uncertainty in 1 year Easy to read in most environments with a bright backlit screen Take your gauge anywhere with a rugged protective holster Designed for pressure calibration in the field, Fluke 700G series pressure gauge calibrators offer you the performance and durability you have come to expect from Fluke pressure calibration products, while being simple and easy to use. Whether you want to connect to a hydraulic or pneumatic test pump, this series is intended as a complete calibration solution with 23 pressure gauges from 10 inH2O/20 mbar to 10,000 psi/690 bar. With a standard accuracy of 0.05% on the full scale and reference standard gauges with accuracies of 0.04%, you will definitely find a gauge that fits your application exactly. Measurement and data logging The Fluke 700G series of meters and pump sets are designed for pressure experts working with process pressure instruments. The pressure ranges of the 700G series gauges cover the ranges needed to meet process pressure calibration requirements, including atmospheric pressure +/- 10 inH20 (+/- 25 mbar) to 10,000 psi (0-690 bar), absolute pressure from 0 to 15 psi (0-1 bar) to 0-300 psi (0-20 bar) and reference thermometers from 0 to 30 psi (0-2 bar) to 10,000 psi (0-690 bar). Standard accuracy to 0.05 % of full scale Reference thermometers offer accuracy of 0.04 % of gauge reading Record more than 8,493 pressure readings in memory, which can be uploaded to a PC (with 700G/TRACK software) Robust design certified Intrinsically Safe Robust sealed IP-67 housing including protective holster Ensures you can work safely in explosive environments CSA: Class 1, div. 2, groups A-D ATEX: II 3 G Ex ic IIB T6 Gc 3-year warranty as standard User-friendly pressure solution Pressure gauge calibrators are the easiest pressure calibration tools to use. Switch them on, connect them to the pressure device you want to measure, and watch your reading - it's that simple. When combined with a Fluke-700PTPK pneumatic or 700HTPK hydraulic pump set, the 700G becomes a complete pressure source and measurement solution. The 700PTPK2 and 700HTPK2 premium pump sets offer easy connection to the gauge and the device under test, with connections that require no tools. Complete pressure calibration solution when meters are combined with dedicated pump sets Calibrate up to 600 psi (20 bar) with the pneumatic pump set 700PTPK or 700PTPK2. Calibrate up to 10,000 psi (690 bar) with the hydraulic pump set 700HTPK or 700HTPK2. ds: dsc: Scope of delivery Manual on CD-ROM in 14 languages Traceable calibration certificate Adapter 1/4" NPT to 1/4" ISO kts: precision pressure test gauge 100 PSIG kpn: 700G06 kpn_dash: kpn_clear: 700G06 bkpn: FLUKE 700G06 bkpn_clear: FLUKE 700G06 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4097538 sr_ns: FLUKE4097538
r: 08107051 p: 1075.489 pid: 72800 b: FLUKE q: 0 st: lt: 8 ean: 0095969611053 sr: FLUKE 4097514 sr_no_br: 4097514 sr_no_br_cl: 4097514 sr_cl: FLUKE4097514 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 700G05 precision pressure test gauge 30 PSIG - 4097514 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description Precision pressure gauge calibrators designed for fast and accurate test results Make precise pressure measurements from 10 inH2O/20 mbar to 10,000 psi/690 bar Highly accurate; 0.05 % measurement uncertainty in 1 year Easy to read in most environments with a bright backlit screen Take your gauge anywhere with a rugged protective holster Designed for pressure calibration in the field, Fluke 700G series pressure gauge calibrators offer you the performance and durability you have come to expect from Fluke pressure calibration products, while being simple and easy to use. Whether you want to connect to a hydraulic or pneumatic test pump, this series is intended as a complete calibration solution with 23 pressure gauges from 10 inH2O/20 mbar to 10,000 psi/690 bar. With a standard accuracy of 0.05% on the full scale and reference standard gauges with accuracies of 0.04%, you will definitely find a gauge that fits your application exactly. Measurement and data logging The Fluke 700G series of meters and pump sets are designed for pressure experts working with process pressure instruments. The pressure ranges of the 700G series gauges cover the ranges needed to meet process pressure calibration requirements, including atmospheric pressure +/- 10 inH20 (+/- 25 mbar) to 10,000 psi (0-690 bar), absolute pressure from 0 to 15 psi (0-1 bar) to 0-300 psi (0-20 bar) and reference thermometers from 0 to 30 psi (0-2 bar) to 10,000 psi (0-690 bar). Standard accuracy to 0.05 % of full scale Reference thermometers offer accuracy of 0.04 % of gauge reading Record more than 8,493 pressure readings in memory, which can be uploaded to a PC (with 700G/TRACK software) Robust design certified Intrinsically Safe Robust sealed IP-67 housing including protective holster Ensures you can work safely in explosive environments CSA: Class 1, div. 2, groups A-D ATEX: II 3 G Ex ic IIB T6 Gc 3-year warranty as standard User-friendly pressure solution Pressure gauge calibrators are the easiest pressure calibration tools to use. Switch them on, connect them to the pressure device you want to measure, and watch your reading - it's that simple. When combined with a Fluke-700PTPK pneumatic or 700HTPK hydraulic pump set, the 700G becomes a complete pressure source and measurement solution. The 700PTPK2 and 700HTPK2 premium pump sets offer easy connection to the gauge and the device under test, with connections that require no tools. Complete pressure calibration solution when meters are combined with dedicated pump sets Calibrate up to 600 psi (20 bar) with the pneumatic pump set 700PTPK or 700PTPK2. Calibrate up to 10,000 psi (690 bar) with the hydraulic pump set 700HTPK or 700HTPK2. ds: dsc: Scope of delivery Manual on CD-ROM in 14 languages Traceable calibration certificate Adapter 1/4" NPT to 1/4" ISO kts: precision pressure test gauge 30 PSIG kpn: 700G05 kpn_dash: kpn_clear: 700G05 bkpn: FLUKE 700G05 bkpn_clear: FLUKE 700G05 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4097514 sr_ns: FLUKE4097514
r: 08106943 p: 1075.489 pid: 73454 b: FLUKE q: 0 st: lt: 8 ean: 0095969674126 sr: FLUKE 4353545 sr_no_br: 4353545 sr_no_br_cl: 4353545 sr_cl: FLUKE4353545 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 700GA4 precision pressure test gauge 15 PSIA - 4353545 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description Precision pressure gauge calibrators designed for fast and accurate test results Make precise pressure measurements from 10 inH2O/20 mbar to 10,000 psi/690 bar Highly accurate; 0.05 % measurement uncertainty in 1 year Easy to read in most environments with a bright backlit screen Take your gauge anywhere with a rugged protective holster Designed for pressure calibration in the field, Fluke 700G series pressure gauge calibrators offer you the performance and durability you have come to expect from Fluke pressure calibration products, while being simple and easy to use. Whether you want to connect to a hydraulic or pneumatic test pump, this series is intended as a complete calibration solution with 23 pressure gauges from 10 inH2O/20 mbar to 10,000 psi/690 bar. With a standard accuracy of 0.05% on the full scale and reference standard gauges with accuracies of 0.04%, you will definitely find a gauge that fits your application exactly. Measurement and data logging The Fluke 700G series of meters and pump sets are designed for pressure experts working with process pressure instruments. The pressure ranges of the 700G series gauges cover the ranges needed to meet process pressure calibration requirements, including atmospheric pressure +/- 10 inH20 (+/- 25 mbar) to 10,000 psi (0-690 bar), absolute pressure from 0 to 15 psi (0-1 bar) to 0-300 psi (0-20 bar) and reference thermometers from 0 to 30 psi (0-2 bar) to 10,000 psi (0-690 bar). Standard accuracy to 0.05 % of full scale Reference thermometers offer accuracy of 0.04 % of gauge reading Record more than 8,493 pressure readings in memory, which can be uploaded to a PC (with 700G/TRACK software) Robust design certified Intrinsically Safe Robust sealed IP-67 housing including protective holster Ensures you can work safely in explosive environments CSA: Class 1, div. 2, groups A-D ATEX: II 3 G Ex ic IIB T6 Gc 3-year warranty as standard User-friendly pressure solution Pressure gauge calibrators are the easiest pressure calibration tools to use. Switch them on, connect them to the pressure device you want to measure, and watch your reading - it's that simple. When combined with a Fluke-700PTPK pneumatic or 700HTPK hydraulic pump set, the 700G becomes a complete pressure source and measurement solution. The 700PTPK2 and 700HTPK2 premium pump sets offer easy connection to the gauge and the device under test, with connections that require no tools. Complete pressure calibration solution when meters are combined with dedicated pump sets Calibrate up to 600 psi (20 bar) with the pneumatic pump set 700PTPK or 700PTPK2. Calibrate up to 10,000 psi (690 bar) with the hydraulic pump set 700HTPK or 700HTPK2. ds: dsc: Scope of delivery Manual on CD-ROM in 14 languages Traceable calibration certificate Adapter 1/4" NPT to 1/4" ISO kts: precision pressure test gauge 15 PSIA kpn: 700GA4 kpn_dash: kpn_clear: 700GA4 bkpn: FLUKE 700GA4 bkpn_clear: FLUKE 700GA4 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353545 sr_ns: FLUKE4353545
r: 08107036 p: 1056.983 pid: 74221 b: FLUKE q: 0 st: lt: 8 ean: 0095969867108 sr: FLUKE 4969588 sr_no_br: 4969588 sr_no_br_cl: 4969588 sr_cl: FLUKE4969588 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE BTL20ANG curved intelligent measuring probe set - 4969588 cn: TEST LEAD SET cn2: TEST LEAD SET cn_clear: TESTLEADSET d: Product description Curved probes offer better access to hard-to-reach battery terminals Long and short probe extensions increase versatility CAT II 1000V and CAT III 600V rated Available with the BT520ANG and BT521ANG, or as a standalone accessory, the BTL20ANG intelligent test probe set makes Fluke 500-series battery analysers the ideal measurement tools for maintenance, troubleshooting and to measure performance of individual batteries and battery banks used in critical battery back-up applications. With optimised measurement pin angles and coil placement, the BTL20ANG gives you the manoeuvrability you need to avoid obstacles and get into tight cabinet spaces, all while offering the same CAT II 1000V and CAT III 600V you have come to expect from Fluke battery analysers. ds: dsc: kts: curved intelligent measuring probe set kpn: BTL20ANG kpn_dash: kpn_clear: BTL20ANG bkpn: FLUKE BTL20ANG bkpn_clear: FLUKE BTL20ANG c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Test lead set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke test lead set sr_no_br_cl_ns: 4969588 sr_ns: FLUKE4969588
r: 08107078 p: 1044.958 pid: 71800 b: FLUKE q: 0 st: lt: 8 ean: 0095969765534 sr: FLUKE 4542286 sr_no_br: 4542286 sr_no_br_cl: 4542286 sr_cl: FLUKE4542286 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE BTL21 interactive measuring probe for battery analyser with temperature sensor - 4542286 cn: TEST LEAD SET cn2: TEST LEAD SET cn_clear: TESTLEADSET d: Product description Intelligent measurement probe set with integrated IR temperature sensor, designed for the Fluke BT521 battery analyser. The BTL21 has a built-in LCD display, a three-colour LED for warning indication good/false, voice count for battery ID and an integrated storage button. Includes long and short probe extensions for hard-to-reach battery cabinets. ds: dsc: kts: interactive measuring probe for battery analyser with temperature sensor kpn: BTL21 kpn_dash: kpn_clear: BTL21 bkpn: FLUKE BTL21 bkpn_clear: FLUKE BTL21 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Test lead set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke test lead set sr_no_br_cl_ns: 4542286 sr_ns: FLUKE4542286
r: 08106946 p: 1044.745 pid: 73459 b: FLUKE q: 0 st: lt: 8 ean: 0095969674157 sr: FLUKE 4353577 sr_no_br: 4353577 sr_no_br_cl: 4353577 sr_cl: FLUKE4353577 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 700GA27 precision pressure test gauge 300 PSIA - 4353577 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description Precision pressure gauge calibrators designed for fast and accurate test results Make precise pressure measurements from 10 inH2O/20 mbar to 10,000 psi/690 bar Highly accurate; 0.05 % measurement uncertainty in 1 year Easy to read in most environments with a bright backlit screen Take your gauge anywhere with a rugged protective holster Designed for pressure calibration in the field, Fluke 700G series pressure gauge calibrators offer you the performance and durability you have come to expect from Fluke pressure calibration products, while being simple and easy to use. Whether you want to connect to a hydraulic or pneumatic test pump, this series is intended as a complete calibration solution with 23 pressure gauges from 10 inH2O/20 mbar to 10,000 psi/690 bar. With a standard accuracy of 0.05% on the full scale and reference standard gauges with accuracies of 0.04%, you will definitely find a gauge that fits your application exactly. Measurement and data logging The Fluke 700G series of meters and pump sets are designed for pressure experts working with process pressure instruments. The pressure ranges of the 700G series gauges cover the ranges needed to meet process pressure calibration requirements, including atmospheric pressure +/- 10 inH20 (+/- 25 mbar) to 10,000 psi (0-690 bar), absolute pressure from 0 to 15 psi (0-1 bar) to 0-300 psi (0-20 bar) and reference thermometers from 0 to 30 psi (0-2 bar) to 10,000 psi (0-690 bar). Standard accuracy to 0.05 % of full scale Reference thermometers offer accuracy of 0.04 % of gauge reading Record more than 8,493 pressure readings in memory, which can be uploaded to a PC (with 700G/TRACK software) Robust design certified Intrinsically Safe Robust sealed IP-67 housing including protective holster Ensures you can work safely in explosive environments CSA: Class 1, div. 2, groups A-D ATEX: II 3 G Ex ic IIB T6 Gc 3-year warranty as standard User-friendly pressure solution Pressure gauge calibrators are the easiest pressure calibration tools to use. Switch them on, connect them to the pressure device you want to measure, and watch your reading - it's that simple. When combined with a Fluke-700PTPK pneumatic or 700HTPK hydraulic pump set, the 700G becomes a complete pressure source and measurement solution. The 700PTPK2 and 700HTPK2 premium pump sets offer easy connection to the gauge and the device under test, with connections that require no tools. Complete pressure calibration solution when meters are combined with dedicated pump sets Calibrate up to 600 psi (20 bar) with the pneumatic pump set 700PTPK or 700PTPK2. Calibrate up to 10,000 psi (690 bar) with the hydraulic pump set 700HTPK or 700HTPK2. ds: dsc: Scope of delivery Manual on CD-ROM in 14 languages Traceable calibration certificate Adapter 1/4" NPT to 1/4" ISO kts: precision pressure test gauge 300 PSIA kpn: 700GA27 kpn_dash: kpn_clear: 700GA27 bkpn: FLUKE 700GA27 bkpn_clear: FLUKE 700GA27 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353577 sr_ns: FLUKE4353577
r: 03291287 p: 1042.1 pid: 71770 b: FLUKE q: 0 st: lt: 8 ean: 0095969611114 sr: FLUKE 4097610 sr_no_br: 4097610 sr_no_br_cl: 4097610 sr_cl: FLUKE4097610 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 700G30 precision pressure test gauge 5000 PSIG - 4097610 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description Precision pressure gauge calibrators designed for fast and accurate test results Make precise pressure measurements from 10 inH2O/20 mbar to 10,000 psi/690 bar Highly accurate; 0.05 % measurement uncertainty in 1 year Easy to read in most environments with a bright backlit screen Take your gauge anywhere with a rugged protective holster Designed for pressure calibration in the field, Fluke 700G series pressure gauge calibrators offer you the performance and durability you have come to expect from Fluke pressure calibration products, while being simple and easy to use. Whether you want to connect to a hydraulic or pneumatic test pump, this series is intended as a complete calibration solution with 23 pressure gauges from 10 inH2O/20 mbar to 10,000 psi/690 bar. With a standard accuracy of 0.05% on the full scale and reference standard gauges with accuracies of 0.04%, you will definitely find a gauge that fits your application exactly. Measurement and data logging The Fluke 700G series of meters and pump sets are designed for pressure experts working with process pressure instruments. The pressure ranges of the 700G series gauges cover the ranges needed to meet process pressure calibration requirements, including atmospheric pressure +/- 10 inH20 (+/- 25 mbar) to 10,000 psi (0-690 bar), absolute pressure from 0 to 15 psi (0-1 bar) to 0-300 psi (0-20 bar) and reference thermometers from 0 to 30 psi (0-2 bar) to 10,000 psi (0-690 bar). Standard accuracy to 0.05 % of full scale Reference thermometers offer accuracy of 0.04 % of gauge reading Record more than 8,493 pressure readings in memory, which can be uploaded to a PC (with 700G/TRACK software) Robust design certified Intrinsically Safe Robust sealed IP-67 housing including protective holster Ensures you can work safely in explosive environments CSA: Class 1, div. 2, groups A-D ATEX: II 3 G Ex ic IIB T6 Gc 3-year warranty as standard User-friendly pressure solution Pressure gauge calibrators are the easiest pressure calibration tools to use. Switch them on, connect them to the pressure device you want to measure, and watch your reading - it's that simple. When combined with a Fluke-700PTPK pneumatic or 700HTPK hydraulic pump set, the 700G becomes a complete pressure source and measurement solution. The 700PTPK2 and 700HTPK2 premium pump sets offer easy connection to the gauge and the device under test, with connections that require no tools. Complete pressure calibration solution when meters are combined with dedicated pump sets Calibrate up to 600 psi (20 bar) with the pneumatic pump set 700PTPK or 700PTPK2. Calibrate up to 10,000 psi (690 bar) with the hydraulic pump set 700HTPK or 700HTPK2. ds: dsc: Scope of delivery Manual on CD-ROM in 14 languages Traceable calibration certificate Adapter 1/4" NPT to 1/4" ISO kts: precision pressure test gauge 5000 PSIG kpn: 700G30 kpn_dash: kpn_clear: 700G30 bkpn: FLUKE 700G30 bkpn_clear: FLUKE 700G30 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4097610 sr_ns: FLUKE4097610
