r: 03395551 p: 6684.196 pid: 178062 b: FLUKE q: 0 st: lt: 8 ean: 0095969293273 sr: FLUKE 2452080 sr_no_br: 2452080 sr_no_br_cl: 2452080 sr_cl: FLUKE2452080 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Measurement voltage Yes Current measurement Yes Digital Yes Low battery message Yes Max. current AC/DC 24 mA Max. resistance 4 kOhm Battery size AA Max. voltage AC/DC 30 V With current clamp No Measurement resistance Yes Measurement frequency Yes Measurement of noise No Measurement temperature Yes Measurement of electrical capacity No Max. frequency 15 kHz n: FLUKE 726 multifunctional precision process calibrator - 2452080 cn: PROCESS CALIBRATOR cn2: PROCESS CALIBRATOR cn_clear: PROCESSCALIBRATOR d: Product description More accurate measurement and calibration source performance, to the nearest 0.01%. Two separate channels; measure, generate and display process signals simultaneously. Measure volts, mA, RTDs, thermocouples, frequency and ohms to test sensors and transmitters Generate/simulate volts, mA, thermocouples, RTDs, frequency and pressure to calibrate transmitters Measure or generate pressure using one of 29 Fluke 700Pxx pressure modules (pressure pump required) Generate mA at simultaneous pressure measurements to perform control valve and I/P tests Integrated pressure switch test lets you record switch set, reset and dead zone values Memory storage for up to 8 calibration results, recall of locally measured and stored calibration data for later analysis Error rate calculation of transmitters, interpreting calibration results without calculator Perform linearity tests quickly with the automatic step and rise functions Power transmitters during tests with 24 V loop power supply and simultaneous mA measurement Store frequently used test settings for later use Frequency totaliser and frequency pulse train source mode for comprehensive testing of flowmeters. In HART mode, a 250-ohm resistor is interleaved when measuring and generating mA for compatibility with HART instrumentation. Proprietary RTD curves add calibration constants for certified RTD probes for extended temperature measurement. Newly designed input voltage protection for even greater reliability ds: dsc: Scope of delivery Multifunctional precision process calibrator Set of AC72 crocodile clips Set of stackable measuring leads Set of TL 75 measuring leads Operating manual kts: multifunctional precision process calibrator kpn: 726 kpn_dash: kpn_clear: 726 bkpn: FLUKE 726 bkpn_clear: FLUKE 726 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Process calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke process calibrator sr_no_br_cl_ns: 2452080 sr_ns: FLUKE2452080
r: 08107130 p: 6624.462 pid: 72936 b: FLUKE q: 0 st: lt: 8 ean: 0095969782258 sr: FLUKE 4607064 sr_no_br: 4607064 sr_no_br_cl: 4607064 sr_cl: FLUKE4607064 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE LENS/25MAC2 smart 25 micron macro infrared lens - 4607064 cn: ACCESSORIES/PART THERMAL IMAGING CAMERA cn2: ACCESSORIES/PART THERMAL IMAGING CAMERA cn_clear: ACCESSORIESPARTTHERMALIMAGINGCAMERA d: Product description Save the trouble of sending your camera to be calibrated along with the lens: with smart lenses, you can simply attach the lens to any suitable camera and capture images immediately. With this lens, there is no need to precisely adjust the focus wheel to get an optimally sharp image. With your lens on the camera, you use the LaserSharp Auto Focus to focus. You then ensure that the camera and the measurement object are within the working distance of the lens (~8 to ~14 mm). Made of 100% diamond-turned germanium with engineered coating, the most efficient material available for transferring energy to the detector. Use the threaded tripod mount of the TiX560, TiX520 or TiX500 to attach the camera to a workbench mounting system, keeping the camera stable and motionless during image capture. The TiX560 also features a remote control function, allowing you to capture images from your computer while the camera remains undisturbed. (Remote control not available on the TiX520.) Capture incredibly detailed images of very small objects, allowing you to gain insight into the heat build-up and heat dissipation of printed circuit boards, identify a faulty or undersized component, or possibly even pinpoint exact defect locations on those components. See details as small as 25 microns, which is smaller than the thickness of an average human hair. Suitable for TiX560, TiX520 and TiX500. ds: dsc: kts: smart 25 micron macro infrared lens kpn: LENS/25MAC2 kpn_dash: kpn_clear: LENS25MAC2 bkpn: FLUKE LENS/25MAC2 bkpn_clear: FLUKE LENS25MAC2 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessories/part thermal imaging camera | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessories/part thermal imaging camera sr_no_br_cl_ns: 4607064 sr_ns: FLUKE4607064
r: 08107133 p: 6535.867 pid: 166255 b: FLUKE q: 0 st: lt: 8 ean: 0095969865234 sr: FLUKE 4961188 sr_no_br: 4961188 sr_no_br_cl: 4961188 sr_cl: FLUKE4961188 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 4961188 smart 4x infrared telephoto lens cn: ACCESSORIES/PART THERMAL IMAGING CAMERA cn2: ACCESSORIES/PART THERMAL IMAGING CAMERA cn_clear: ACCESSORIESPARTTHERMALIMAGINGCAMERA d: Product description View your measurement object 4 times more magnified than with a standard lens, while remaining on the ground or at a safe distance. A 4x telephoto lens can help identify a potential problem in your equipment, even if your measurement object is as small and far away as a faulty connection of a high power line or an overheated mouth of a high flare pipe. Save the trouble of sending your camera for calibration along with the lens: with smart lenses, you can simply attach the lens to any suitable camera and capture images immediately. This lens includes a patent-pending lens attachment system that holds the lens firmly in place, reducing lens movement. Manufactured from 100% diamond-turned germanium with engineered coating, the most efficient material available for transferring energy to the detector. Compatible with RSE300 and RSE600 ds: dsc: kts: smart 4x infrared telephoto lens kpn: 4961188 kpn_dash: kpn_clear: 4961188 bkpn: FLUKE 4961188 bkpn_clear: FLUKE 4961188 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessories/part thermal imaging camera | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessories/part thermal imaging camera sr_no_br_cl_ns: 4961188 sr_ns: FLUKE4961188
r: 02951313 p: 6461.38 pid: 71306 b: FLUKE q: 0 st: lt: 8 ean: 0095969550925 sr: FLUKE 3665056 sr_no_br: 3665056 sr_no_br_cl: 3665056 sr_cl: FLUKE3665056 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1555 digital insulation resistance tester up to 10 kV - 3665056 cn: INSULATION RESISTANCE TESTER cn2: INSULATION RESISTANCE TESTER cn_clear: INSULATIONRESISTANCETESTER d: Product description: Evaluate trends, remove doubts The Fluke 1555 insulation resistance tester enables digital insulation testing up to 10 kV. This makes these instruments ideal for testing a wide variety of high-voltage equipment, including switchgear, motors, generators and cables. Fluke's insulation testers now cover the entire IEEE 43-2000 test voltage range, with a 3-year warranty, the longest in this class, and the CAT IV 600 V safety specification. With its measured value memory and PC interface, the 1555 is the perfect tool for preventive and predictive maintenance programmes, designed to detect potential faults before they actually occur. Key features Measurement of voltages up to 10 kV Safety specification CAT III 1000 V, CAT IV 600 V A voltage warning signal lets the user know that voltage is present and displays voltage values up to 600 V AC or DC, for increased user safety Selectable test voltages in 50 V increments between 250 V and 1000 V and in 100 V increments above 1000 V Measurements can be stored in 99 memory locations, each assigned to a unique user-defined label for easy recall Long battery life allows the user to perform over 750 tests before recharging is required Automatic calculation of dielectric absorption and polarisation index without additional setting operations Protection system eliminates the effect of creeping current when measuring high resistances Large digital/analogue LCD display for easy reading Measurement of capacitance and leakage current Rise function for breakdown tests Resistance measurements up to 2 T? Timer setting up to 99 minutes for time-controlled tests 3-year warranty ds: dsc: Scope of delivery Measurement leads with alligator clips (red, black, green) Infrared adapter with interface cable CD-ROM with FlukeView Forms Basic AC power cord Carrying case English User's Manual User Guide on CD-ROM Reference Guide on card Software licence agreement Registration card Installation guide for FlukeView Forms Installation manual for USB-IR cable Heavy duty test leads with alligator clips kts: digital insulation resistance tester up to 10 kV kpn: 1555 kpn_dash: kpn_clear: 1555 bkpn: FLUKE 1555 bkpn_clear: FLUKE 1555 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Insulation resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke insulation resistance tester sr_no_br_cl_ns: 3665056 sr_ns: FLUKE3665056
r: 08121757 p: 6410.523 pid: 166281 b: FLUKE q: 0 st: lt: 8 ean: 0195112122976 sr: FLUKE 5594352 sr_no_br: 5594352 sr_no_br_cl: 5594352 sr_cl: FLUKE5594352 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE SMFT-1000 PRO/FPC Multifunctional PV tester PRO with 1 year Premium Care in backpack - 5594352 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description All-in-one PV system test solution that meets IEC 62446-1 standards for category 1 and category 2 testing Compare on-site I-V curve results with manufacturer's I-V curve data Radiometer connection for accurate real-time measurements of radiation and temperature When you bundle the Fluke SMFT-1000 multifunction PV tester with Fluke Premium Care, you ensure you get the most out of your money. Fluke SMFT-1000 Multifunctional PV Tester and Performance Analyzer is an all-in-one testing solution to monitor PV system performance and safety and speed up reporting to customers. The Fluke Premium Care package offers you extra coverage on top of your standard warranty for things like accidental damage coverage, expedited calibration and annual instrument inspections. ds: dsc: Scope of delivery SMFT-1000-BP professional tool backpack SMFT-1000 multifunction PV analyser Carrying strap Fuse set Adapter cable IRDA optical-to-USB Zeroing adapter IRR2-BT wireless solar radiation meter pro 80PR-IRR external temperature measuring probe Mounting bracket for solar panel Carrying case i100 AC/DC current clamp 100 A TPAK magnet set TP1000 measuring probe with remote test key TL1000 test lead kit TL1000-MC4 test lead kit TL1000/30M test lead on reel Coupling set kts: Multifunctional PV tester PRO with 1 year Premium Care in backpack kpn: SMFT-1000 PRO/FPC kpn_dash: SMFT kpn_clear: SMFT1000PROFPC bkpn: FLUKE SMFT-1000 PRO/FPC bkpn_clear: FLUKE SMFT1000PROFPC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 5594352 sr_ns: FLUKE5594352
r: 02951293 p: 6363.257 pid: 72593 b: FLUKE q: 0 st: lt: 8 ean: 0095969868785 sr: FLUKE 4977402 sr_no_br: 4977402 sr_no_br_cl: 4977402 sr_cl: FLUKE4977402 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1550C FC 5KV Insulation resistance tester with IR3000 FC connector - 4977402 cn: INSULATION RESISTANCE TESTER cn2: INSULATION RESISTANCE TESTER cn_clear: INSULATIONRESISTANCETESTER d: Product description: Evaluate trends, remove doubts The Fluke 1550C insulation resistance tester enables digital insulation testing up to 5 kV. This makes these instruments ideal for testing a wide variety of high-voltage equipment, including switchgear, motors, generators and cables. Fluke's insulation testers now cover the entire IEEE 43-2000 test voltage range, with a 3-year warranty, the longest in this class, and the CAT IV 600 V safety specification. With its measured value memory and PC interface, the 1550C is the perfect tool for preventive and predictive maintenance programmes, designed to detect potential faults before they actually occur. Key features: Features include: Measuring voltages up to 5 kV Safety specification CAT III 1000 V, CAT IV 600 V A voltage warning signal lets the user know that voltage is present and displays voltage values up to 600 V AC or DC, for increased user safety Selectable test voltages in 50 V increments between 250 V and 1000 V and in 100 V increments above 1000 V Measurements can be stored in 99 memory locations, each assigned to a unique user-defined label for easy recall Long battery life allows the user to perform over 750 tests before recharging is required Automatic calculation of dielectric absorption and polarisation index without additional setting operations Protection system eliminates the effect of creeping current when measuring high resistances Large digital/analogue LCD display for easy reading Measurement of capacitance and leakage current Rise function for breakdown tests Resistance measurements up to 2 TOhm Timer setting up to 99 minutes for time-controlled tests 3-year warranty ds: dsc: kts: Insulation resistance tester with IR3000 FC connector kpn: 1550C FC 5KV kpn_dash: kpn_clear: 1550CFC5KV bkpn: FLUKE 1550C FC 5KV bkpn_clear: FLUKE 1550CFC5KV c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Insulation resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke insulation resistance tester sr_no_br_cl_ns: 4977402 sr_ns: FLUKE4977402
r: 02951311 p: 6353.942 pid: 71080 b: FLUKE q: 0 st: lt: 8 ean: 0095969550970 sr: FLUKE 3665111 sr_no_br: 3665111 sr_no_br_cl: 3665111 sr_cl: FLUKE3665111 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1555/KIT insulation tester kit 10kV - 3665111 cn: INSULATION RESISTANCE TESTER cn2: INSULATION RESISTANCE TESTER cn_clear: INSULATIONRESISTANCETESTER d: Product description: Evaluate trends, remove doubts The Fluke 1555 insulation resistance tester enables digital insulation testing up to 10 kV. This makes these instruments ideal for testing a wide variety of high-voltage equipment, including switchgear, motors, generators and cables. Fluke's insulation testers now cover the entire IEEE 43-2000 test voltage range, with a 3-year warranty, the longest in this class, and the CAT IV 600 V safety specification. With its measured value memory and PC interface, the 1555 is the perfect tool for preventive and predictive maintenance programmes, designed to detect potential faults before they actually occur. Key features Measurement of voltages up to 10 kV Safety specification CAT III 1000 V, CAT IV 600 V A voltage warning signal lets the user know that voltage is present and displays voltage values up to 600 V AC or DC, for increased user safety Selectable test voltages in 50 V increments between 250 V and 1000 V and in 100 V increments above 1000 V Measurements can be stored in 99 memory locations, each assigned to a unique user-defined label for easy recall Long battery life allows the user to perform over 750 tests before recharging is required Automatic calculation of dielectric absorption and polarisation index without additional setting operations Protection system eliminates the effect of creeping current when measuring high resistances Large digital/analogue LCD display for easy reading Measurement of capacitance and leakage current Rise function for breakdown tests Resistance measurements up to 2 T? Timer setting up to 99 minutes for time-controlled tests 3-year warranty ds: dsc: Scope of delivery Test leads with alligator clips (red, black, green) Infrared adapter with interface cable AC power cord Quick reference card USB-IR cable Installation guide for USB-IR cables IP67 Hard Case Certificate of Calibration Heavy duty test leads with alligator clips kts: insulation tester kit 10kV kpn: 1555/KIT kpn_dash: kpn_clear: 1555KIT bkpn: FLUKE 1555/KIT bkpn_clear: FLUKE 1555KIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Insulation resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke insulation resistance tester sr_no_br_cl_ns: 3665111 sr_ns: FLUKE3665111
r: 02951308 p: 6287.826 pid: 71069 b: FLUKE q: 0 st: lt: 8 ean: 0095969550918 sr: FLUKE 3665021 sr_no_br: 3665021 sr_no_br_cl: 3665021 sr_cl: FLUKE3665021 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1550 C digital insulation resistance tester up to 5KV - 3665021 cn: INSULATION RESISTANCE TESTER cn2: INSULATION RESISTANCE TESTER cn_clear: INSULATIONRESISTANCETESTER d: Product description: Evaluate trends, remove doubts The Fluke 1550C insulation resistance tester enables digital insulation testing up to 5 kV. This makes these instruments ideal for testing a wide variety of high-voltage equipment, including switchgear, motors, generators and cables. Fluke's insulation testers now cover the entire IEEE 43-2000 test voltage range, with a 3-year warranty, the longest in this class, and the CAT IV 600 V safety specification. With its measured value memory and PC interface, the 1550C is the perfect tool for preventive and predictive maintenance programmes, designed to detect potential faults before they actually occur. Key features Measurement of voltages up to 5 kV Safety specification CAT III 1000 V, CAT IV 600 V A voltage warning signal lets the user know that voltage is present and displays voltage values up to 600 V AC or DC, for increased user safety Selectable test voltages in 50 V increments between 250 V and 1000 V and in 100 V increments above 1000 V Measurements can be stored in 99 memory locations, each assigned to a unique user-defined label for easy recall Long battery life allows the user to perform over 750 tests before recharging is required Automatic calculation of dielectric absorption and polarisation index without additional setting operations Protection system eliminates the effect of creeping current when measuring high resistances Large digital/analogue LCD display for easy reading Measurement of capacitance and leakage current Rise function for breakdown tests Resistance measurements up to 2 T? Timer setting up to 99 minutes for time-controlled tests 3-year warranty ds: dsc: Scope of delivery Test leads with alligator clips (red, black, green) Infrared adapter with interface cable AC cable Soft carrying case English manual User manual on CD-ROM Quick reference card Software licence agreement Registration card USB-IR cable installation manual kts: digital insulation resistance tester up to 5KV kpn: 1550 C kpn_dash: kpn_clear: 1550C bkpn: FLUKE 1550 C bkpn_clear: FLUKE 1550C c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Insulation resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke insulation resistance tester sr_no_br_cl_ns: 3665021 sr_ns: FLUKE3665021
r: 02951310 p: 6125.677 pid: 73306 b: FLUKE q: 0 st: lt: 8 ean: 0095969550987 sr: FLUKE 3665127 sr_no_br: 3665127 sr_no_br_cl: 3665127 sr_cl: FLUKE3665127 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1550C/KIT Insulation tester kit 5kV with additional Connect infrared connector - 3665127 cn: INSULATION RESISTANCE TESTER cn2: INSULATION RESISTANCE TESTER cn_clear: INSULATIONRESISTANCETESTER d: Product description: Evaluate trends, remove doubts The Fluke 1550C insulation resistance tester enables digital insulation testing up to 5 kV. This makes these instruments ideal for testing a wide variety of high-voltage equipment, including switchgear, motors, generators and cables. Fluke's insulation testers now cover the entire IEEE 43-2000 test voltage range, with a 3-year warranty, the longest in this class, and the CAT IV 600 V safety specification. With its measured value memory and PC interface, the 1550C is the perfect tool for preventive and predictive maintenance programmes, designed to detect potential faults before they actually occur. Key features Measurement of voltages up to 5 kV Safety specification CAT III 1000 V, CAT IV 600 V A voltage warning signal lets the user know that voltage is present and displays voltage values up to 600 V AC or DC, for increased user safety Selectable test voltages in 50 V increments between 250 V and 1000 V and in 100 V increments above 1000 V Measurements can be stored in 99 memory locations, each assigned to a unique user-defined label for easy recall Long battery life allows the user to perform over 750 tests before recharging is required Automatic calculation of dielectric absorption and polarisation index without additional setting operations Protection system eliminates the effect of creeping current when measuring high resistances Large digital/analogue LCD display for easy reading Measurement of capacitance and leakage current Rise function for breakdown tests Resistance measurements up to 2 T? Timer setting up to 99 minutes for time-controlled tests 3-year warranty ds: dsc: Scope of delivery Measurement leads with alligator clips (red, black, green) Infrared adapter with interface cable CD-ROM with FlukeView Forms Basic AC power cord IP67 carrying case Calibration certificate English User Guide User Guide on CD-ROM Reference guide on card Software licence agreement Registration card Installation manual for FlukeView Forms Installation manual for USB-IR cable kts: Insulation tester kit 5kV with additional Connect infrared connector kpn: 1550C/KIT kpn_dash: kpn_clear: 1550CKIT bkpn: FLUKE 1550C/KIT bkpn_clear: FLUKE 1550CKIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Insulation resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke insulation resistance tester sr_no_br_cl_ns: 3665127 sr_ns: FLUKE3665127
r: 08121752 p: 6060.519 pid: 166272 b: FLUKE q: 0 st: lt: 8 ean: 0195112119969 sr: FLUKE 5581569 sr_no_br: 5581569 sr_no_br_cl: 5581569 sr_cl: FLUKE5581569 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE SMFT-1000/FPC solar instrument set (with 1 year Premium Care) - 5581569 cn: SOLAR ENERGY METER cn2: SOLAR ENERGY METER cn_clear: SOLARENERGYMETER d: Product description The SMFT-1000 is an all-in-one test solution for PV professionals providing installation, commissioning and maintenance services for systems operating at up to 1000 V DC. The Fluke Premium Care bundle gives you additional coverage beyond your standard warranty for things like coverage for accidental damage, expedited calibration and annual instrument inspections. ds: dsc: Scope of delivery SMFT-1000-BP professional tool backpack SMFT-1000 multifunction PV analyser Carrying strap Fuse set Adapter cable IRDA optical-to-USB Zeroing adapter IRR2-BT wireless solar radiation meter pro 80PR-IRR external temperature measuring probe Mounting bracket for solar panel Carrying case i100 AC/DC current clamp 100 A TPAK magnet set TP1000 measuring probe with remote test key TL1000 test lead kit TL1000-MC4 test lead kit TL1000/30M test lead on reel Connector set kts: solar instrument set (with 1 year Premium Care) kpn: SMFT-1000/FPC kpn_dash: SMFT kpn_clear: SMFT1000FPC bkpn: FLUKE SMFT-1000/FPC bkpn_clear: FLUKE SMFT1000FPC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Solar energy meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke solar energy meter sr_no_br_cl_ns: 5581569 sr_ns: FLUKE5581569
r: 03268880 p: 5906.409 pid: 73824 b: FLUKE q: 0 st: lt: 8 ean: 0095969915298 sr: FLUKE 5104765 sr_no_br: 5104765 sr_no_br_cl: 5104765 sr_cl: FLUKE5104765 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE BT521ANG 500 series battery analyser + measuring probe set + current clamp - 5104765 cn: POWER QUALITY ANALYSER cn2: POWER QUALITY ANALYSER cn_clear: POWERQUALITYANALYSER d: Product description The ideal gauge for maintenance, troubleshooting and to measure performance of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, direct and alternating voltage, direct and alternating current strength, ripple voltage, frequency and temperature Sequence measurement mode: Automatic or manual sequential testing of battery series with automatic storage of measurements including voltage, resistance and temperature (with intelligent measuring probe BTL21), eliminating the need to press a button each time a measurement needs to be stored Comprehensive recording: All measured values are automatically recorded during measurement and can be viewed on the instrument before downloading for analysis on the go. Reduced measurement complexity, simplified workflow and an intuitive user interface provide a new level of ease of use when measuring batteries. The ideal measurement tool for maintenance, troubleshooting and to measure performance of individual stationary batteries and battery banks used in critical battery back-up applications Intuitive user interface, compact design and robust construction ensure optimal performance, measurement results and reliability Includes a wide range of battery measurement functions, ranging from DC voltage and resistance measurements to full condition measurements using automated sequence function measurements and the infrared temperature measurement system integrated into the measurement probe Designed for measurements on all types of stationary batteries. Threshold values for voltage and resistance Fluke battery analysers allow you to quickly and easily define upper and lower threshold values and tolerance ranges. During the testing process, measured values are automatically compared with the predefined thresholds and you get a PASS (good), FAIL (error) or WARN (warning) after each measurement. Fluke battery management software Fluke battery management software lets you easily and quickly import data from the battery analyser to a PC. The measurement data and battery profile information are stored and archived with the Management Software and can be used to compare results, switch results between conductivity and resistivity values and perform trend analysis. All measurement data, battery profile and analysis information can be used to easily generate reports. Quick display of stored measurement values Profile management Histogram of a battery series with end-user-defined threshold value Historical trend data of batteries Multiple rounds of discharge voltage Quickly generate reports Upgrade firmware of Fluke Battery Analyzer Swap readings between conductance and resistance readings Fluke Battery Analyze mobile app The BT521 offers wireless communication for data download and remote display while measuring via the dedicated Fluke Battery Analyzer mobile app (note: the Fluke BT521 is currently not compatible with Fluke Connect). With the Fluke Battery Analyze mobile app, you can View profiles View Sequence test data Email sequence test data Main features of the Fluke BT521: (Designed for users who need built-in temperature measurements) Battery voltage: While measuring internal resistance, Fluke Battery Analyzers also measure the voltage of the battery under testDischarge voltage : In Discharge mode, the voltage of each battery is measured multiple times at user-defined intervals during a discharge or load test. Users can calculate the length of time after which a battery reaches the shutdown voltage and use this time to calculate the battery's capacity lossRipple voltage measurement : Measures unwanted residual AC component of the rectified voltage in DC charging and inverter circuits. Allows users to measure AC components in DC charging circuits and find one of the causes of battery deteriorationModes Meter (Meter) and Sequence (Sequence): Meter mode is used for quick measurement or fault finding. In this mode, you can store and read readings in a measurement or time sequence. Sequence mode is intended for maintenance tasks in multiple power supply systems and battery series. Before starting a task, users can configure a profile for the task, for managing data and creating reportsThreshold and Warning: Users can configure up to 10 sets of thresholds and get a good/error/warning indication after each measurementWeakness Test Inter-Cell Connections and Data Management: Measures the resistance of the inter-cell connection between batteries in a series. AutoHold: When AutoHold is enabled, a reading is captured when it remains stable for 1 second. The readout is released when a new measurement startsAutoSave : When AutoSave is enabled, measurement values are automatically saved to the product's internal memory after AutoHoldFluke Battery management software: Easily import data from the product to a PC. With the management software, measurement data and battery profile information are saved and archived after which they can be used for comparison and trend analysis. All measurement data and all battery profile information and analysis can be used for easy report creationComprehensive recording: All measured values are automatically captured during recording and can be reviewed on the instrument before downloading for analysis on the go. Optimised user interface:Quick, guided setup ensures you always capture the right dataBattery life :7.4V 3000mAh lithium-ion battery for more than eight hours of continuous use. USB port: For fast data download to included data analysis and report management application software. Highest safety specification in the industry: specification CAT III 600V, 1000VDC max for safe measurements around battery power equipment. Intelligent test probes BTL21 with long and short extensions, built-in LCD display and speaker for visual and auditory feedback and integrated temperature sensor for making temperature measurements on the negative battery pole at each measurementBTL20ANG Intelligent test probe set, with long and short angled probe pin extensions (no temperature sensor) View profiles and corresponding measurement results from the Battery Analyzer Send profile and measurement results via e-mail in .CSV data format ds: dsc: Scope of delivery Battery analyser 4-wire measuring pin (set) BTL10, basic measuring lead (set) TL175 TwistGuard measuring leads with adapter BTL20ANG Intelligent measuring probe set with extension and curved pen (no temperature sensor) BTL21 intelligent measuring probe set with extension and temperature sensor i410, AC/DC current clamp BP500 lithium-ion battery BC500 AC charger mini-USB cable Shoulder strap Carrying strap Magnetic suspension strap FlukeView battery management system Soft carrying case Spare fuses (2) Battery labels Zero-ohm calibration resistor kts: 500 series battery analyser + measuring probe set + current clamp kpn: BT521ANG kpn_dash: kpn_clear: BT521ANG bkpn: FLUKE BT521ANG bkpn_clear: FLUKE BT521ANG c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Power quality analyser | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke power quality analyser sr_no_br_cl_ns: 5104765 sr_ns: FLUKE5104765
r: 02957565 p: 5866.285 pid: 71562 b: FLUKE q: 0 st: lt: 8 ean: 0095969778855 sr: FLUKE 4588378 sr_no_br: 4588378 sr_no_br_cl: 4588378 sr_cl: FLUKE4588378 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1738/B portable three-phase power logger (excl. current probes) - 4588378 cn: ENERGY COST METER cn2: ENERGY COST METER cn_clear: ENERGYCOSTMETER d: Product description: Comprehensive surveys of power quality and energy. Gather the data you need to make real-time critical decisions The Fluke 1738 three-phase Advanced Power Logger is compatible with the Fluke Connect mobile app and desktop software, giving you the data you need to make immediate, critical, real-time decisions about power quality and energy consumption. Like the Fluke 1736 Power Logger, the 1738 Advanced Power Logger automatically measures and records more than 500 power quality parameters and allows you to investigate more advanced power quality issues. Perform advanced analysis with an enhanced power quality report (EN50160) that gives you a quick idea of the overall status of the electrical system. The power quality report is based on detailed power quality data with display of waveforms of events so you can see even better how to make the system more reliable and economical. Installation is easier than ever and reduces measurement uncertainty thanks to an optimised user interface, flexible current probes and an intelligent measurement monitoring function that allows you to reduce measurement errors by digitally checking and correcting common connection errors. View and share data remotely with your team via the Fluke Connect app or view your logger over your company's Wi-Fi network so you can maintain safer working distances and make critical decisions in real time, reducing the need for security equipment, site visits and check-ins. You can also quickly and easily display measurements in a summary or graph to identify problems, and you can create detailed reports with the included Fluke Energy Analyze Plus software package. Optionally, you can create IEEE519 reports to understand harmonic levels, voltage and current distortion and load current (licence required).... The Fluke 1738 is the ideal test tool for conducting energy studies and for advanced recording of mains power quality. Key features: Key measurement functions: Automatically measure and record voltage, current, power, harmonics and associated power quality values. Compatible with Fluke Connect: View data locally on the instrument, via the Fluke Connect mobile app and desktop software or via your building's Wi-Fi network. Convenient instrument connection: The instrument is powered directly from the measured circuit. Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III approved for service input and downstream circuits. Measures all three phases and neutral: With 4 flexible current clamps included. Comprehensive log function: More than 20 individual log sessions can be stored on the instruments. All measured values are even recorded automatically so you never lose measurement trends. They can even be accessed during recording sessions and before downloading for real-time analysis. Record decreases, increases and inrush currents: Includes snapshots of waveforms of events and a high-resolution RMS profile along with the date, time stamp and severity to identify possible root causes of mains power quality problems. Power quality summary: Summarises key parameters about power quality so you can quickly see the overall status of your electrical system and know if further analysis and reporting is required. Bright colour touchscreen: Useful analysis and checking of data can be done in the field, with full graphical display. Optimised user interface: Always capture the right data with fast, guided graphical setup and eliminate uncertainty about connections with the intelligent verification function. Full 'on-site' set-up via the front panel or the Fluke Connect App: No need to return to the workshop to download and install or to take a computer to the electrical distributor. Fully integrated registration: Connect other Fluke Connect devices to the Fluke 1738 to record two other measurement data simultaneously. You can choose from almost any measurement data on a Fluke Connect wireless digital multimeter.* Energy Analyze Plus application software: Download and analyse every detail of energy consumption and power quality using our automatic reports. ds: dsc: Scope of delivery 1738 energy logger Power supply Voltage test cables Alligator clips (4x) Carrying case Energy Analyze Plus software Magnetic suspension strap Magnetic voltage probes (4x) Cables Colour coding set Documentation on USB memory kts: portable three-phase power logger (excl. current probes) kpn: 1738/B kpn_dash: kpn_clear: 1738B bkpn: FLUKE 1738/B bkpn_clear: FLUKE 1738B c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Energy cost meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke energy cost meter sr_no_br_cl_ns: 4588378 sr_ns: FLUKE4588378
r: 08107093 p: 5847.732 pid: 73504 b: FLUKE q: 0 st: lt: 8 ean: 0095969856843 sr: FLUKE 4920651 sr_no_br: 4920651 sr_no_br_cl: 4920651 sr_cl: FLUKE4920651 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1742/30/EUS three-phase Power Quality Logger 60cm 3000A iFlex current clamps, EU/US version - 4920651 cn: POWER QUALITY ANALYSER cn2: POWER QUALITY ANALYSER cn_clear: POWERQUALITYANALYSER d: Product description Hardware features Measure the three voltage and current phases plus the neutral: Three-phase and neutral voltage leads and four flexible current clamps. Extended log function: more than 20 individual log sessions can be stored in the instrument. A comprehensive range of current and power quality variables is automatically recorded, so you will not miss a single measurement trend. Measuring with very high accuracy: complies with the strict standard IEC 61000-4-30 Class A, Edition 3 for 'Test and measurement techniques: methods for measuring mains power quality'. Capture voltage fluctuations and interruptions: The 1748 contains snapshots of event waveforms and an RMS event profile, along with the date, time stamp and event severity information, to identify possible root causes of mains power quality problems. Measure key power quality parameters: Measure harmonics and interharmonics for voltage and current, including unbalance, flicker and rapid voltage changes. Optimised user interface: Always capture the correct data with a fast, interactive graphical PC installer and remove uncertainty about connections with the intelligent verification function and the only automatic correction function available for a Power Quality Logger. Connection errors are automatically indicated by an orange light on the unit's power button, which turns green once the error has been corrected. Optimised user interface: Quick, graphical settings for which additional information is available allow you to capture the correct data every time, and the intelligent check function ensures that the correct connections have been made, reducing user uncertainty Flexible power supply: Switches on directly from the measured circuit with the widest range available for a Power Quality Logger (automatically from 100 V to 500 V), or switches on with a power cable for a wall outlet, so you can test anywhere Robust and reliable: Designed for demanding installation environments with IP65 protection rating when used with IP65 voltage input adapter. Two external USB ports: One for connection to a PC and another for quick and easy download of data to a standard USB stick or other USB devices, allowing you to leave the measuring instrument in place without interrupting the logging function. Ethernet connectivity: Wired and wireless connections for installing the instrument and quickly downloading data. Compact size: With its modest size of 23 cm x 18 cm x 5.4 cm (9.1 inches x 7.1 inches x 2.1 inches), it fits into small rooms and dividers. Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III approved for service input and downstream circuits. Optimised measuring accessories: Unique flat voltage cable that cannot get tangled and thin, flexible current clamps make installation easy even in tight spaces. Battery life: Operating time of four hours (backup time) per charge on a lithium-ion battery, to cope with temporary power failures. Security: Protect your precious property from theft with a standard security chain or other security. Magnetic hanging clip set: quickly and safely store the instrument in or outside electrical dividers. Suitable for all models and supplied as standard with the 1748 model. Software functions Settings and download for "In-workshop" or "In-the-Field" via PC application software: Simple download using USB stick, wifi download, Ethernet cable connection or via USB cable. Application software Energy Analyze Plus: Download and analyse every measured detail of energy consumption and power quality condition with automatic reports. One-button reports: Create standard reports according to common standards such as EN 50160, IEEE 519, GOST 33073 or export data in a PQDIF or NeQual-compatible format for use with third-party software. Advanced analysis: choose from all available logged parameters to create a customised display of logged measurements for advanced data linking. Features The compact and rugged Fluke 1740 Series Power Quality Loggers are designed specifically for technicians who need flexibility to troubleshoot, calculate energy consumption and analyse power distribution systems. Fully compliant with international power quality standards such as IEC 61000-4-30, the Fluke 1740 series can simultaneously log up to 500 parameters and record events. Moreover, tracing intermittent and hard-to-locate power supply problems is easier than ever. With the integrated Energy Analyze Plus software, mains power quality at the service input, distribution station or load can be quickly assessed according to national and international standards such as EN50160 and IEEE 519. Installation is easier than ever and reduces measurement uncertainty thanks to an optimised user interface, flexible current probes and an intelligent measurement monitoring function that allows you to check and correct connections digitally. A Wi-Fi connection allows data to be viewed directly on site. This not only reduces the time spent in a potentially hazardous environment, but also eliminates the 'hassle' of donning personal protective equipment. The Fluke 1748 logs more than 500 different parameters for each averaging period. This allows you to analyse mains power quality in detail and link intermittent events to detailed waveform data to identify the root cause of faults. The Fluke 1746 captures all relevant power supply parameters for basic recording of mains power quality, for energy-saving surveys and electrical network planning, with the option of a full upgrade to 1748. For simple load and energy surveys, the Fluke 1742 offers optimum performance in a rugged package. The 1742 can be upgraded to the 1746 or to the full functionality of the 1748. ds: dsc: Scope of delivery Fluke 1742 logger Soft storage bag/case Voltage test cable (3-phase + N) Alligator clips (blue) (x2) Alligator clips (black) (x4) Set of cable markers Mains cable Mains adapter MA-C8 Set of 2 measure leads (stackable and non-stackable, blue, 7 inches) Set of 2 measure leads (non-stackable, blue, 79 inches) USB cable i17xx-flex3000IP 24-inch current clamps (x4) WiFi/BLE to USB adapter kts: three-phase Power Quality Logger 60cm 3000A iFlex current clamps, EU/US version kpn: 1742/30/EUS kpn_dash: kpn_clear: 174230EUS bkpn: FLUKE 1742/30/EUS bkpn_clear: FLUKE 174230EUS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Power quality analyser | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke power quality analyser sr_no_br_cl_ns: 4920651 sr_ns: FLUKE4920651
r: 08121736 p: 5803.363 pid: 166259 b: FLUKE q: 0 st: lt: 8 ean: 0195112123638 sr: FLUKE 5596811 sr_no_br: 5596811 sr_no_br_cl: 5596811 sr_cl: FLUKE5596811 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 725/FPC Multifunction process calibrator with 1 year Premium Care - 5596811 cn: PROCESS CALIBRATOR cn2: PROCESS CALIBRATOR cn_clear: PROCESSCALIBRATOR d: Product description Powerful field calibrator that is easy to use. Its measurement and generation functions allow you to test and calibrate almost any process parameter. Easy to carry due to its compact, streamlined shape Robust, reliable construction to withstand field use Easy-to-read display for measurement and generation functions where you can view input and output signals simultaneously. Measures volts, mA, RTDs, thermocouples, frequency and ohms to test sensors and transmitters Generates/simulates volts, mA, thermocouples, RTDs, frequency, resistance and pressure to calibrate transmitters Measures/generates pressure using any of Fluke's 29 700Pxx pressure modules Delivers mA at simultaneous pressure measurements for performing control valve and I/P tests Frequency and CPM functions also enable flowmeter testing Performs linearity tests quickly with the automatic step and rise functions Supplies transmitters by loop feeding during measurement and measures mA simultaneously Handles fast pulsed RTD transmitters and PLCs, with pulses as short as 10 ms Backlight allows working in poor lighting conditions Large battery capacity: four AA batteries Battery cover for easy battery replacement The Fluke Premium Care package offers you extra coverage on top of your standard warranty for things like accidental damage coverage, expedited calibration and replacement or repair of damaged accessories. ds: dsc: Scope of delivery 725 multi-function process calibrator 1 set of AC72 crocodile clips 1 pair of stackable test leads TL75 NIST-traceable calibration report and data Quick guide kts: Multifunction process calibrator with 1 year Premium Care kpn: 725/FPC kpn_dash: kpn_clear: 725FPC bkpn: FLUKE 725/FPC bkpn_clear: FLUKE 725FPC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Process calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke process calibrator sr_no_br_cl_ns: 5596811 sr_ns: FLUKE5596811
r: 03268878 p: 5790.636 pid: 71553 b: FLUKE q: 0 st: lt: 8 ean: 0095969915281 sr: FLUKE 5104752 sr_no_br: 5104752 sr_no_br_cl: 5104752 sr_cl: FLUKE5104752 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE BT520ANG 500 series battery analyser + measuring probe set - 5104752 cn: POWER QUALITY ANALYSER cn2: POWER QUALITY ANALYSER cn_clear: POWERQUALITYANALYSER d: Product description The ideal gauge for maintenance, troubleshooting and to measure performance of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, direct and alternating voltage, direct and alternating current strength, ripple voltage, frequency and temperature Sequence measurement mode: Automatic or manual sequential testing of battery series with automatic storage of measurements including voltage, resistance and temperature (with intelligent measuring probe BTL21), eliminating the need to press a button each time a measurement needs to be stored Comprehensive recording: All measured values are automatically recorded during measurement and can be viewed on the instrument before downloading for analysis on the go. Reduced measurement complexity, simplified workflow and an intuitive user interface provide a new level of ease of use when measuring batteries. The ideal measurement tool for maintenance, troubleshooting and to measure performance of individual stationary batteries and battery banks used in critical battery back-up applications Intuitive user interface, compact design and robust construction ensure optimal performance, measurement results and reliability Includes a wide range of battery measurement functions, ranging from DC voltage and resistance measurements to full condition measurements using automated sequence function measurements and the infrared temperature measurement system integrated into the measurement probe Designed for measurements on all types of stationary batteries. Threshold values for voltage and resistance Fluke battery analysers allow you to quickly and easily define upper and lower threshold values and tolerance ranges. During the testing process, measured values are automatically compared with the predefined thresholds and you get a PASS (good), FAIL (error) or WARN (warning) after each measurement. Fluke battery management software Fluke battery management software lets you easily and quickly import data from the battery analyser to a PC. The measurement data and battery profile information are stored and archived with the Management Software and can be used to compare results, switch results between conductivity and resistivity values and perform trend analysis. All measurement data, battery profile and analysis information can be used to easily generate reports. Quick display of stored measurement values Profile management Histogram of a battery series with end-user-defined threshold value Historical trend data of batteries Multiple rounds of discharge voltage Quickly generate reports Upgrade firmware of Fluke Battery Analyzer Swap readings between conductance and resistance readings Fluke Battery Analyze mobile app The BT521 offers wireless communication for data download and remote display while measuring via the dedicated Fluke Battery Analyzer mobile app (note: the Fluke BT521 is currently not compatible with Fluke Connect). With the Fluke Battery Analyze mobile app, you can View profiles View Sequence test data Email sequence test data Main features of the Fluke BT520: (Designed for measuring batteries in cabinets and hard-to-reach places) Battery voltage: While measuring internal resistance, Fluke Battery Analyzers also measure the voltage of the battery under test Discharge voltage: In Discharge mode, the voltage of each battery is measured several times at user-defined intervals during a discharge or load test. Users can calculate the length of time after which a battery reaches the shutdown voltage and use this time to calculate the battery's capacity loss Ripple voltage measurement: measures unwanted residual AC component of rectified voltage in DC charging and inverter circuits. Allows users to measure AC components in DC charging circuits and find one of the causes of battery deterioration Meter (Meter) and Sequence (Sequence) modes: Meter mode is used for quick measurement or fault finding. In this mode, you can store and read readings in a measurement or time sequence. Sequence mode is intended for maintenance tasks in multiple power supply systems and battery series. Before starting a task, users can configure a profile for the task, to manage data and create reports Threshold and warning: users can configure up to 10 sets of threshold values and receive a good/error/warning indication after each measurement Resistance test mutual cell connections and Data Management: measures the resistance of the mutual cell connection between batteries in a series. AutoHold: When AutoHold is enabled, a reading is captured when it remains stable for 1 second. The reading is released when a new measurement starts AutoSave: When AutoSave is enabled, readings are automatically stored in the product's internal memory after AutoHold Fluke Battery management software: Easily import data from the product to a PC. With the management software, measurement data and battery profile information are stored and archived after which they can be used for comparison and trend analysis. All measurement data and battery profile information and analysis can be used for easy report creation Comprehensive recording: All measured values are automatically captured during recording and can be reviewed on the instrument before downloading for analysis on the go. Optimised user interface: Quick, guided set-up ensures that you always capture the right data Battery life: 7.4V 3000mAh lithium-ion battery for more than eight hours of continuous use. USB port: For fast data download to included data analysis and report management application software. Highest safety specification in the industry: specification CAT III 600V, 1000VDC max. for safe measurements around battery power equipment. Intelligent test probe set BTL20 with long and short test probe extensions and built-in LCD display and speaker for visual and auditory feedback BTL20ANG Intelligent test probe set, with long and short angled probe probe extensions (no temperature sensor) Large soft carrying case ds: dsc: Scope of delivery Battery analyser 4-wire measuring pin (set) BTL10, basic measuring lead (set) TL175 TwistGuard measuring leads with adapter BTL20ANG Intelligent measuring probe set with extension and curved pen (no temperature sensor) BTL20 Intelligent probe set with extension (no temperature sensor) BP500 lithium-ion battery BC500 AC charger mini-USB cable Shoulder strap Carrying strap Magnetic suspension strap FlukeView battery management system Soft carrying case Spare fuses (2) Battery labels Zero-ohm calibration resistor kts: 500 series battery analyser + measuring probe set kpn: BT520ANG kpn_dash: kpn_clear: BT520ANG bkpn: FLUKE BT520ANG bkpn_clear: FLUKE BT520ANG c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Power quality analyser | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke power quality analyser sr_no_br_cl_ns: 5104752 sr_ns: FLUKE5104752
