r: 08121733 p: 14353.057 pid: 166302 b: FLUKE q: 0 st: lt: 8 ean: 0195112120859 sr: FLUKE 5586812 sr_no_br: 5586812 sr_no_br_cl: 5586812 sr_cl: FLUKE5586812 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1777/FPC three-phase power quality analyser with 1 year Premium Care in roller case - 5586812 cn: POWER QUALITY ANALYSER cn2: POWER QUALITY ANALYSER cn_clear: POWERQUALITYANALYSER d: Product description Automatically measures parameters for power and power quality Mains power quality status at a glance for faster fault finding Easily display data on V/A/Hz, power, drops, rises and harmonics Record fast transients of up to 8 kV Power supply directly from measurement circuit without a power cord ds: dsc: Scope of delivery 1777 Power Quality Analyzer I17XX-FLEX1500 24 iFLEX 1500A 24 IN (2.0 M) current clamps 17XX voltage measuring lead with flat cable 3-phase+N AC285 black alligator clip AC285 green alligator clip Black 1m USB-C cable Power cord FLK-17XX-TL 0.18M measuring lead set Green measuring lead MP1-3R/1B magnetic probe set 174X-HANGER magnetic suspension kit 177X-4204 WIFI/BLE module Cable marking kit (for voltage and current) 174X-MA-C8 wall outlet adapter 1777 HARDCASE rolling case kts: three-phase power quality analyser with 1 year Premium Care in roller case kpn: 1777/FPC kpn_dash: kpn_clear: 1777FPC bkpn: FLUKE 1777/FPC bkpn_clear: FLUKE 1777FPC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Power quality analyser | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke power quality analyser sr_no_br_cl_ns: 5586812 sr_ns: FLUKE5586812
r: 02952060 p: 14331.628 pid: 73431 b: FLUKE q: 0 st: lt: 8 ean: 0095969840408 sr: FLUKE 4856976 sr_no_br: 4856976 sr_no_br_cl: 4856976 sr_cl: FLUKE4856976 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 729 300G automatic pressure calibrator (20 bar) - 4856976 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 729 automatic pressure calibrator was designed specifically with process engineers in mind. This pressure calibrator simplifies the pressure calibration process and provides faster, more accurate test results. Technicians know that calibrating pressure can be a time-consuming task, but the 729 makes it easier than ever: with an electric pump that automatically builds and regulates pressure in one easy-to-use, rugged, portable package. The 729 is the ideal portable pressure calibrator, on which you simply type in a desired pressure value after which the calibrator automatically pumps until the desired set point is reached. Then the internal fine adjustment automatically stabilises the pressure to the requested value. The Fluke 729 can also automatically test multiple pressure measurement points and automatically document the results. Calibration is as simple as typing in the initial and final pressure, the number of measurement points and the tolerance level. The 729 does the rest. Built-in HART communication capabilities allow adjustment of mA settings of HART transmitters, light HART configurations and tuning to applied 0% and 100% values. Upload and manage documented calibration results with the DPCTrack2 calibration management software, making it easy to manage your instruments, create scheduled checks and reports, and manage calibration data. With a choice of three ranges, namely 30 psi (2 bar, 200 kPa), 150 psi (10 bar, 1 MPa) and 300 psi (20 bar, 2 MPa), the Fluke 729 automatic pressure calibrators are designed to perform when and where you need them. Key features: Automatic pressure build-up and control up to 300 psi Easy process documentation with built-in test templates Automatic internal pressure fine-tuning Measure, generate and simulate signals from 4 to 20 mA 24V loop power supply for powering transmitters for tests Clear two/three-channel colour graphic display HART communication for testing smart HART transmitters Built-in leak test for checking test fixtures for leakage Rugged portable design with standard 3-year warranty Compatibility with the Fluke Connect app Temperature measurements with optional 720RTD thermocouple V DC measurement for testing transmitters with outputs from 1 V DC to 5 V DC Compatible with 700-series and 750-series pressure modules Uploading of documented test results to DPCTrack2 calibration management software Innovative semi-rigid carrying case specially designed for on-site work Automatic pressure generation and control up to 300 psi (20 bar, 2MPa) Enter a pressure and the 729 automatically pumps until the desired pressure is reached. Enter a test template and the 729 will automatically pump and document a multi-point pressure calibration test. Easy documentation of calibration using defined templates for transmitters and switches. Type in the start and end pressures and number of measurement points. The 729 does the rest by documenting the applied pressure, measured mA values and % error for each measurement point. The bright colour graphic display warns in red of test results that are out of tolerance. Automatic internal pressure fine-tuning helps compensate for small leaks in hoses and test settings. There is then no need to turn a fine regulator to compensate for leaks, eliminating the need for manual pumping and manual fine-tuning of test set-ups. HART communication allows adjustment of the mA output signal, of applied values and of the pressure zero point of HART pressure transmitters. You can perform light configuration tasks such as changing a transmitter tag, measurement units and range setting. Other supported HART tasks include setting fixed mA output signals for troubleshooting, reading equipment configuration and variables, and reading equipment diagnostic data. Measure mA signals on transmitter outputs, generate and simulate mA signals for testing I/Ps and other mA loop devices. andIncludes a 24V loop power supply for testing and powering transmitters during individual tests while the transmitters are disconnected from the control system. Rugged portable designWith [26] Fluke Connect compatibility lets a user perform remote monitoring tasks using the Fluke Connect mobile app, as well as manage and store pressure measurements and log events. Share measurements using ShareLive video calls and emails. Temperature measurements with optional 720RTD thermocouple to perform transfer calibrations. Pressure measurements with old 700-series and new 750-series pressure modules when different pressure measurement ranges or resolutions are desired. Support in different languages:: select a language in the instrument configuration programme. HART communication commands are limited to English, according to HART equipment descriptors and protocol. Semi-rigid carrying case is specially designed for on-site work, to store test hoses, fittings, test leads and small hand tools for on-site pressure calibrations. ds: dsc: kts: automatic pressure calibrator (20 bar) kpn: 729 300G kpn_dash: kpn_clear: 729300G bkpn: FLUKE 729 300G bkpn_clear: FLUKE 729300G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4856976 sr_ns: FLUKE4856976
r: 02910124 p: 14092.307 pid: 73191 b: FLUKE q: 0 st: lt: 211 ean: 0095969862707 sr: FLUKE 4947332 sr_no_br: 4947332 sr_no_br_cl: 4947332 sr_cl: FLUKE4947332 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FLK-Ti480 PRO 9 Hz Infrared camera in robust carrying case - 4947332 cn: THERMAL IMAGING CAMERA cn2: THERMAL IMAGING CAMERA cn_clear: THERMALIMAGINGCAMERA d: Product description: Increased sensitivity to visualise differences Capture smaller temperature differences with greater thermal sensitivity Old screen clarity versus the new sharper screen image Easier problem visualisation and diagnosis Sharper screen images with more visible colour difference Display deviations from standard temperatures and communicate problems to your team using multiple Delta-T markers: choose one as a reference point and the other to display a value as a difference Multiple in-camera rectangular markers: identify min/max temperatures for a section of equipment or an equipment range Easier to distinguish heat differences with a new palette and wider range of yellow and green in the display Improved user-tested touchscreen interface makes good use of current styles and is more intuitive than ever More flexibility to visualise objects: from small to large Now compatible with all Fluke infrared smart lenses Macro, telephoto and wide-angle lens: from small to large capture your object Fluke smart lenses are interchangeable between compatible cameras without calibration. Compatible with smartly designed telephoto, wide-angle and macro lenses With the Ti480 PRO, worries about focus are a thing of the past. MultiSharp Focus captures images that are in focus throughout the entire focus range, even if you start with a completely blurred target object. The camera takes multiple images and combines them to give you sharp images of both nearby and distant objects. See more detail with SuperResolution for 4 times more pixel data. Using the software and SuperResolution, you can see images up to 1280 x 960 resolution. Save time with the Fluke Connect system You can wirelessly synchronise images directly from your camera to the Fluke Connect system and link them to a project or work order. Having simultaneous access to maintenance data both on site and from the office or another location means you can make faster decisions and collaborate with team members in real-time. You can also stream the camera image to your smartphone or PC and control the camera remotely. Technician reviewing measurements from Fluke Connect tools on smartphone Capture measurements from your wireless test tools in the Fluke Connect app on your smartphone. Comparing two IR images on Fluke Connect Assets software Dashboard object analysis: easily compare complex data. Key features: Increased sensitivity to visualise temperature differences Easier to visualise and diagnose problems with sharper on-screen images, multiple rectangle frames and 9 colour palettes More intuitive interface, improved user-tested touchscreen interface More flexibility to visualise objects from small to large with interchangeable smartly designed lenses - no calibration required, 2x and 4x tele, wide-angle and macro lens compatibility Capture clear, accurate images with MultiSharp Focus that focuses across the entire field of view Get instantly sharp images of the desired object. LaserSharp Auto Focus uses a built-in laser rangefinder that calculates and displays the distance of your target object. Get 4x more pixels with SuperResolution, a technology that captures multiple images and combines them into a single 1280 x 960 pixel image Save time - wirelessly synchronise images on your camera with the Fluke Connect system to link to a project or work order Reduce the need to take notes on site with IR-PhotoNotes and recorded text ds: dsc: kts: Infrared camera in robust carrying case kpn: FLK-Ti480 PRO 9 Hz kpn_dash: FLK kpn_clear: FLKTi480PRO9Hz bkpn: FLUKE FLK-Ti480 PRO 9 Hz bkpn_clear: FLUKE FLKTi480PRO9Hz c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Thermal imaging camera | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke thermal imaging camera sr_no_br_cl_ns: 4947332 sr_ns: FLUKE4947332
r: 02952062 p: 13858.074 pid: 71215 b: FLUKE q: 0 st: lt: 8 ean: 0095969840422 sr: FLUKE 4856990 sr_no_br: 4856990 sr_no_br_cl: 4856990 sr_cl: FLUKE4856990 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 729 30G automatic pressure calibrator (2 bar) - 4856990 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 729 automatic pressure calibrator was designed specifically with process engineers in mind. This pressure calibrator simplifies the pressure calibration process and provides faster, more accurate test results. Technicians know that calibrating pressure can be a time-consuming task, but the 729 makes it easier than ever: with an electric pump that automatically builds and regulates pressure in one easy-to-use, rugged, portable package. The 729 is the ideal portable pressure calibrator, on which you simply type in a desired pressure value after which the calibrator automatically pumps until the desired set point is reached. Then the internal fine adjustment automatically stabilises the pressure to the requested value. The Fluke 729 can also automatically test multiple pressure measurement points and automatically document the results. Calibration is as simple as typing in the initial and final pressure, the number of measurement points and the tolerance level. The 729 does the rest. Built-in HART communication capabilities allow adjustment of mA settings of HART transmitters, light HART configurations and tuning to applied 0% and 100% values. Upload and manage documented calibration results with the DPCTrack2 calibration management software, making it easy to manage your instruments, create scheduled checks and reports, and manage calibration data. With a choice of three ranges, namely 30 psi (2 bar, 200 kPa), 150 psi (10 bar, 1 MPa) and 300 psi (20 bar, 2 MPa), the Fluke 729 automatic pressure calibrators are designed to perform when and where you need them. Key features: Automatic pressure build-up and control up to 300 psi Easy process documentation with built-in test templates Automatic internal pressure fine-tuning Measure, generate and simulate signals from 4 to 20 mA 24V loop power supply for powering transmitters for tests Clear two/three-channel colour graphic display HART communication for testing smart HART transmitters Built-in leak test for checking test fixtures for leakage Rugged portable design with standard 3-year warranty Compatibility with the Fluke Connect app Temperature measurements with optional 720RTD thermocouple V DC measurement for testing transmitters with outputs from 1 V DC to 5 V DC Compatible with 700-series and 750-series pressure modules Uploading of documented test results to DPCTrack2 calibration management software Innovative semi-rigid carrying case specially designed for on-site work Automatic pressure generation and control up to 300 psi (20 bar, 2MPa) Enter a pressure and the 729 automatically pumps until the desired pressure is reached. Enter a test template and the 729 will automatically pump and document a multi-point pressure calibration test. Easy documentation of calibration using defined templates for transmitters and switches. Type in the start and end pressures and number of measurement points. The 729 does the rest by documenting the applied pressure, measured mA values and % error for each measurement point. The bright colour graphic display warns in red of test results that are out of tolerance. Automatic internal pressure fine-tuning helps compensate for small leaks in hoses and test settings. There is then no need to turn a fine regulator to compensate for leaks, eliminating the need for manual pumping and manual fine-tuning of test set-ups. HART communication allows adjustment of the mA output signal, of applied values and of the pressure zero point of HART pressure transmitters. You can perform light configuration tasks such as changing a transmitter tag, measurement units and range setting. Other supported HART tasks include setting fixed mA output signals for troubleshooting, reading equipment configuration and variables, and reading equipment diagnostic data. Measure mA signals on transmitter outputs, generate and simulate mA signals for testing I/Ps and other mA loop devices. andIncludes a 24V loop power supply for testing and powering transmitters during individual tests while the transmitters are disconnected from the control system. Rugged portable designWith [26] Fluke Connect compatibility lets a user perform remote monitoring tasks using the Fluke Connect mobile app, as well as manage and store pressure measurements and log events. Share measurements using ShareLive video calls and emails. Temperature measurements with optional 720RTD thermocouple to perform transfer calibrations. Pressure measurements with old 700-series and new 750-series pressure modules when different pressure measurement ranges or resolutions are desired. Support in different languages:: select a language in the instrument configuration programme. HART communication commands are limited to English, according to HART equipment descriptors and protocol. Semi-rigid carrying case is specially designed for on-site work, to store test hoses, fittings, test leads and small hand tools for on-site pressure calibrations. ds: dsc: kts: automatic pressure calibrator (2 bar) kpn: 729 30G kpn_dash: kpn_clear: 72930G bkpn: FLUKE 729 30G bkpn_clear: FLUKE 72930G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4856990 sr_ns: FLUKE4856990
r: 08121741 p: 13703.127 pid: 166043 b: FLUKE q: 0 st: lt: 8 ean: 0195112129241 sr: FLUKE 6017843 sr_no_br: 6017843 sr_no_br_cl: 6017843 sr_cl: FLUKE6017843 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE ii500/FPC3 Acoustic Imager in case (with 3 years Premium Care) - 6017843 cn: LEAK DETECTOR cn2: LEAK DETECTOR cn_clear: LEAKDETECTOR d: Product description Simple, fast and safe visual detection of gas leaks. The 7-inch LCD touchscreen displays a SoundMap over visual images, making it easier to locate leaks quickly. Intuitive interface requires no training for maintenance teams. The Fluke ii500 Acoustic Imager with LeakQ helps maintenance teams detect, locate and prioritise gas leaks. Maintenance teams need no training and can now check for gas and vacuum leaks even during periods of peak production. The ii500 easily isolates the sound frequency of the leak to make leaks visible despite loud background noise. Standard 3-year premium care. ds: dsc: Scope of delivery ii500 Acoustic Imager Mains adapter and battery charger (including universal mains adapters) Robust lithium-ion battery set USB cable Robust carrying case Adjustable carrying and neck strap Protective sensor array cover kts: Acoustic Imager in case (with 3 years Premium Care) kpn: ii500/FPC3 kpn_dash: kpn_clear: ii500FPC3 bkpn: FLUKE ii500/FPC3 bkpn_clear: FLUKE ii500FPC3 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Leak detector | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke leak detector sr_no_br_cl_ns: 6017843 sr_ns: FLUKE6017843
r: 02952061 p: 13598.57 pid: 72721 b: FLUKE q: 0 st: lt: 8 ean: 0095969840415 sr: FLUKE 4856983 sr_no_br: 4856983 sr_no_br_cl: 4856983 sr_cl: FLUKE4856983 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 729 150G FC automatic pressure calibrator (10 bar) - 4856983 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 729 automatic pressure calibrator was designed specifically with process engineers in mind. This pressure calibrator simplifies the pressure calibration process and provides faster, more accurate test results. Technicians know that calibrating pressure can be a time-consuming task, but the 729 makes it easier than ever: with an electric pump that automatically builds and regulates pressure in one easy-to-use, rugged, portable package. The 729 is the ideal portable pressure calibrator, on which you simply type in a desired pressure value after which the calibrator automatically pumps until the desired set point is reached. Then the internal fine adjustment automatically stabilises the pressure to the requested value. The Fluke 729 can also automatically test multiple pressure measurement points and automatically document the results. Calibration is as simple as typing in the initial and final pressure, the number of measurement points and the tolerance level. The 729 does the rest. Built-in HART communication capabilities allow adjustment of mA settings of HART transmitters, light HART configurations and tuning to applied 0% and 100% values. Upload and manage documented calibration results with the DPCTrack2 calibration management software, making it easy to manage your instruments, create scheduled checks and reports, and manage calibration data. With a choice of three ranges, namely 30 psi (2 bar, 200 kPa), 150 psi (10 bar, 1 MPa) and 300 psi (20 bar, 2 MPa), the Fluke 729 automatic pressure calibrators are designed to perform when and where you need them. Key features: Automatic pressure build-up and control up to 300 psi Easy process documentation with built-in test templates Automatic internal pressure fine-tuning Measure, generate and simulate signals from 4 to 20 mA 24V loop power supply for powering transmitters for tests Clear two/three-channel colour graphic display HART communication for testing smart HART transmitters Built-in leak test for checking test fixtures for leakage Rugged portable design with standard 3-year warranty Compatibility with the Fluke Connect app Temperature measurements with optional 720RTD thermocouple V DC measurement for testing transmitters with outputs from 1 V DC to 5 V DC Compatible with 700-series and 750-series pressure modules Uploading of documented test results to DPCTrack2 calibration management software Innovative semi-rigid carrying case specially designed for on-site work Automatic pressure generation and control up to 300 psi (20 bar, 2MPa) Enter a pressure and the 729 automatically pumps until the desired pressure is reached. Enter a test template and the 729 will automatically pump and document a multi-point pressure calibration test. Easy documentation of calibration using defined templates for transmitters and switches. Type in the starting and ending pressures and number of measurement points. The 729 does the rest by documenting the applied pressure, measured mA values and % error for each measurement point. The bright colour graphic display warns in red of test results that are out of tolerance. Automatic internal pressure fine-tuning helps compensate for small leaks in hoses and test settings. There is then no need to turn a fine regulator to compensate for leaks, eliminating the need for manual pumping and manual fine-tuning of test set-ups. HART communication allows adjustment of the mA output signal, of applied values and of the pressure zero point of HART pressure transmitters. You can perform light configuration tasks such as changing a transmitter tag, measurement units and range setting. Other supported HART tasks include setting fixed mA output signals for troubleshooting, reading equipment configuration and variables, and reading equipment diagnostic data. Measure mA signals on transmitter outputs, generate and simulate mA signals for testing I/Ps and other mA loop devices. andIncludes a 24V loop power supply for testing and powering transmitters during individual tests while the transmitters are disconnected from the control system. Rugged portable designWith [26] Fluke Connect compatibility lets a user perform remote monitoring tasks using the Fluke Connect mobile app, as well as manage and store pressure measurements and log events. Share measurements using ShareLive video calls and emails. Temperature measurements with optional 720RTD thermocouple to perform transfer calibrations. Pressure measurements with old 700-series and new 750-series pressure modules when different pressure measurement ranges or resolutions are desired. Support in different languages:: select a language in the instrument configuration programme. HART communication commands are limited to English, according to HART equipment descriptors and protocol. Semi-rigid carrying case is specially designed for on-site work, to store test hoses, fittings, test leads and small hand tools for on-site pressure calibrations. ds: dsc: kts: automatic pressure calibrator (10 bar) kpn: 729 150G FC kpn_dash: kpn_clear: 729150GFC bkpn: FLUKE 729 150G FC bkpn_clear: FLUKE 729150GFC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4856983 sr_ns: FLUKE4856983
r: 08121732 p: 13355.041 pid: 166267 b: FLUKE q: 0 st: lt: 8 ean: 0195112123645 sr: FLUKE 5596827 sr_no_br: 5596827 sr_no_br_cl: 5596827 sr_cl: FLUKE5596827 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1775/FPC three-phase power quality analyser with 3 years Premium Care in carrying case - 5596827 cn: POWER QUALITY ANALYSER cn2: POWER QUALITY ANALYSER cn_clear: POWERQUALITYANALYSER d: Product description Automatically measures parameters for power and power quality Mains power quality status at a glance for faster fault finding Easily display data on V/A/Hz, power, drops, rises and harmonics Record fast transients of up to 8 kV Power supply directly from measurement circuit without a power cord ds: dsc: Scope of delivery 1775 Power Quality Analyzer I17XX-FLEX1500 18 iFLEX 1500A 18 IN (2.0M) current clamps (set of four) 17XX voltage measuring lead with flat cable 3-phase+N AC285 black alligator clips (set of four) AC285 green alligator clip Black 1m USB-C cable Power cord FLK-17XX-TL 0.18M measuring lead set Green measuring lead MP1-3R/1B magnetic probe set 174X-HANGER magnetic suspension kit 177X-4204 WIFI/BLE module Cable marking kit (for voltage and current) 174X-MA-C8 wall outlet adapter Black carrying case kts: three-phase power quality analyser with 3 years Premium Care in carrying case kpn: 1775/FPC kpn_dash: kpn_clear: 1775FPC bkpn: FLUKE 1775/FPC bkpn_clear: FLUKE 1775FPC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Power quality analyser | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke power quality analyser sr_no_br_cl_ns: 5596827 sr_ns: FLUKE5596827
r: 08121749 p: 13001.049 pid: 166152 b: FLUKE q: 0 st: lt: 8 ean: 0195112123676 sr: FLUKE 5596853 sr_no_br: 5596853 sr_no_br_cl: 5596853 sr_cl: FLUKE5596853 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE MDA-550/FPC 3YR Motor Drive Analyzer with 3 years Premium Care in carrying case - 5596853 cn: OSCILLOSCOPE cn2: OSCILLOSCOPE cn_clear: OSCILLOSCOPE d: Product description Guided testing with graphical, step-by-step connection diagrams Preset measurement profiles reduce set-up complexity Built-in functions for report writing Easily produce troubleshooting reports of the situation in advance and afterwards The Fluke Premium Care package offers you extra coverage on top of your standard warranty for things like accidental damage coverage, expedited calibration and replacement or repair of damaged accessories ds: dsc: Scope of delivery MDA-550 Series III Motor Drive Analyzer 1x BP 291 li-ion battery set 1x BC190 battery charger/mains adapter 3x VPS421 100:1 high voltage measuring probes with alligator clips 1x VPS410-II-R 10:1 500MHz voltage measurement probe 3x i400s AC current clamp 1x SVS-500 shaft voltage probe set (3x brush) Probe holder Two-piece extension rod and magnetic base Carrying case FlukeView-2 PC software (full version) Wifi dongle kts: Motor Drive Analyzer with 3 years Premium Care in carrying case kpn: MDA-550/FPC 3YR kpn_dash: MDA kpn_clear: MDA550FPC3YR bkpn: FLUKE MDA-550/FPC 3YR bkpn_clear: FLUKE MDA550FPC3YR c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Oscilloscope | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke oscilloscope sr_no_br_cl_ns: 5596853 sr_ns: FLUKE5596853
r: 02951959 p: 12987 pid: 71197 b: FLUKE q: 0 st: lt: 8 ean: 0095969840316 sr: FLUKE 4856882 sr_no_br: 4856882 sr_no_br_cl: 4856882 sr_cl: FLUKE4856882 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 729 300G FC automatic pressure calibrator (20 bar) - 4856882 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 729 automatic pressure calibrator was designed specifically with process engineers in mind. This pressure calibrator simplifies the pressure calibration process and provides faster, more accurate test results. Technicians know that calibrating pressure can be a time-consuming task, but the 729 makes it easier than ever: with an electric pump that automatically builds and regulates pressure in one easy-to-use, rugged, portable package. The 729 is the ideal portable pressure calibrator, on which you simply type in a desired pressure value after which the calibrator automatically pumps until the desired set point is reached. Then the internal fine adjustment automatically stabilises the pressure to the requested value. The Fluke 729 can also automatically test multiple pressure measurement points and automatically document the results. Calibration is as simple as typing in the initial and final pressure, the number of measurement points and the tolerance level. The 729 does the rest. Built-in HART communication capabilities allow adjustment of mA settings of HART transmitters, light HART configurations and tuning to applied 0% and 100% values. Upload and manage documented calibration results with the DPCTrack2 calibration management software, making it easy to manage your instruments, create scheduled checks and reports, and manage calibration data. With a choice of three ranges, namely 30 psi (2 bar, 200 kPa), 150 psi (10 bar, 1 MPa) and 300 psi (20 bar, 2 MPa), the Fluke 729 automatic pressure calibrators are designed to perform when and where you need them. Key features: Automatic pressure build-up and control up to 300 psi Easy process documentation with built-in test templates Automatic internal pressure fine-tuning Measure, generate and simulate signals from 4 to 20 mA 24V loop power supply for powering transmitters for tests Clear two/three-channel colour graphic display HART communication for testing smart HART transmitters Built-in leak test for checking test fixtures for leakage Rugged portable design with standard 3-year warranty Compatibility with the Fluke Connect app Temperature measurements with optional 720RTD thermocouple V DC measurement for testing transmitters with outputs from 1 V DC to 5 V DC Compatible with 700-series and 750-series pressure modules Uploading of documented test results to DPCTrack2 calibration management software Innovative semi-rigid carrying case specially designed for on-site work Automatic pressure generation and control up to 300 psi (20 bar, 2MPa) Enter a pressure and the 729 automatically pumps until the desired pressure is reached. Enter a test template and the 729 will automatically pump and document a multi-point pressure calibration test. Easy documentation of calibration using defined templates for transmitters and switches. Type in the start and end pressures and number of measurement points. The 729 does the rest by documenting the applied pressure, measured mA values and % error for each measurement point. The bright colour graphic display warns in red of test results that are out of tolerance. Automatic internal pressure fine-tuning helps compensate for small leaks in hoses and test settings. There is then no need to turn a fine regulator to compensate for leaks, eliminating the need for manual pumping and manual fine-tuning of test set-ups. HART communication allows adjustment of the mA output signal, of applied values and of the pressure zero point of HART pressure transmitters. You can perform light configuration tasks such as changing a transmitter tag, measurement units and range setting. Other supported HART tasks include setting fixed mA output signals for troubleshooting, reading equipment configuration and variables, and reading equipment diagnostic data. Measure mA signals on transmitter outputs, generate and simulate mA signals for testing I/Ps and other mA loop devices. andIncludes a 24V loop power supply for testing and powering transmitters during individual tests while the transmitters are disconnected from the control system. Rugged portable designWith [26] Fluke Connect compatibility lets a user perform remote monitoring tasks using the Fluke Connect mobile app, as well as manage and store pressure measurements and log events. Share measurements using ShareLive video calls and emails. Temperature measurements with optional 720RTD thermocouple to perform transfer calibrations. Pressure measurements with old 700-series and new 750-series pressure modules when different pressure measurement ranges or resolutions are desired. Support in different languages:: select a language in the instrument configuration programme. HART communication commands are limited to English, according to HART equipment descriptors and protocol. Semi-rigid carrying case is specially designed for on-site work, to store test hoses, fittings, test leads and small hand tools for on-site pressure calibrations. ds: dsc: kts: automatic pressure calibrator (20 bar) kpn: 729 300G FC kpn_dash: kpn_clear: 729300GFC bkpn: FLUKE 729 300G FC bkpn_clear: FLUKE 729300GFC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4856882 sr_ns: FLUKE4856882
r: 02951954 p: 12960.388 pid: 72068 b: FLUKE q: 0 st: lt: 8 ean: 0095969840330 sr: FLUKE 4856907 sr_no_br: 4856907 sr_no_br_cl: 4856907 sr_cl: FLUKE4856907 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 729 30G FC automatic pressure calibrator (2 bar) - 4856907 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 729 automatic pressure calibrator was designed specifically with process engineers in mind. This pressure calibrator simplifies the pressure calibration process and provides faster, more accurate test results. Technicians know that calibrating pressure can be a time-consuming task, but the 729 makes it easier than ever: with an electric pump that automatically builds and regulates pressure in one easy-to-use, rugged, portable package. The 729 is the ideal portable pressure calibrator, on which you simply type in a desired pressure value after which the calibrator automatically pumps until the desired set point is reached. Then the internal fine adjustment automatically stabilises the pressure to the requested value. The Fluke 729 can also automatically test multiple pressure measurement points and automatically document the results. Calibration is as simple as typing in the initial and final pressure, the number of measurement points and the tolerance level. The 729 does the rest. Built-in HART communication capabilities allow adjustment of mA settings of HART transmitters, light HART configurations and tuning to applied 0% and 100% values. Upload and manage documented calibration results with the DPCTrack2 calibration management software, making it easy to manage your instruments, create scheduled checks and reports, and manage calibration data. With a choice of three ranges, namely 30 psi (2 bar, 200 kPa), 150 psi (10 bar, 1 MPa) and 300 psi (20 bar, 2 MPa), the Fluke 729 automatic pressure calibrators are designed to perform when and where you need them. Key features: Automatic pressure build-up and control up to 300 psi Easy process documentation with built-in test templates Automatic internal pressure fine-tuning Measure, generate and simulate signals from 4 to 20 mA 24V loop power supply for powering transmitters for tests Clear two/three-channel colour graphic display HART communication for testing smart HART transmitters Built-in leak test for checking test fixtures for leakage Rugged portable design with standard 3-year warranty Compatibility with the Fluke Connect app Temperature measurements with optional 720RTD thermocouple V DC measurement for testing transmitters with outputs from 1 V DC to 5 V DC Compatible with 700-series and 750-series pressure modules Uploading of documented test results to DPCTrack2 calibration management software Innovative semi-rigid carrying case specially designed for on-site work Automatic pressure generation and control up to 300 psi (20 bar, 2MPa) Enter a pressure and the 729 automatically pumps until the desired pressure is reached. Enter a test template and the 729 will automatically pump and document a multi-point pressure calibration test. Easy documentation of calibration using defined templates for transmitters and switches. Type in the start and end pressures and number of measurement points. The 729 does the rest by documenting the applied pressure, measured mA values and % error for each measurement point. The bright colour graphic display warns in red of test results that are out of tolerance. Automatic internal pressure fine-tuning helps compensate for small leaks in hoses and test settings. There is then no need to turn a fine regulator to compensate for leaks, eliminating the need for manual pumping and manual fine-tuning of test set-ups. HART communication allows adjustment of the mA output signal, of applied values and of the pressure zero point of HART pressure transmitters. You can perform light configuration tasks such as changing a transmitter tag, measurement units and range setting. Other supported HART tasks include setting fixed mA output signals for troubleshooting, reading equipment configuration and variables, and reading equipment diagnostic data. Measure mA signals on transmitter outputs, generate and simulate mA signals for testing I/Ps and other mA loop devices. andIncludes a 24V loop power supply for testing and powering transmitters during individual tests while the transmitters are disconnected from the control system. Rugged portable designWith [26] Fluke Connect compatibility lets a user perform remote monitoring tasks using the Fluke Connect mobile app, as well as manage and store pressure measurements and log events. Share measurements using ShareLive video calls and emails. Temperature measurements with optional 720RTD thermocouple to perform transfer calibrations. Pressure measurements with old 700-series and new 750-series pressure modules when different pressure measurement ranges or resolutions are desired. Support in different languages:: select a language in the instrument configuration programme. HART communication commands are limited to English, according to HART equipment descriptors and protocol. Semi-rigid carrying case is specially designed for on-site work, to store test hoses, fittings, test leads and small hand tools for on-site pressure calibrations. ds: dsc: kts: automatic pressure calibrator (2 bar) kpn: 729 30G FC kpn_dash: kpn_clear: 72930GFC bkpn: FLUKE 729 30G FC bkpn_clear: FLUKE 72930GFC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4856907 sr_ns: FLUKE4856907
r: 08106994 p: 12368.266 pid: 166196 b: FLUKE q: 0 st: lt: 8 ean: 0195112124000 sr: FLUKE 5600022 sr_no_br: 5600022 sr_no_br_cl: 5600022 sr_cl: FLUKE5600022 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE PVA-1500T2 Solmetric PV Analyser IV Curve Tracer - 5600022 cn: SOLAR ENERGY METER cn2: SOLAR ENERGY METER cn_clear: SOLARENERGYMETER d: Product description Advanced I-V curve tracer designed specifically for testing and analysing individual photovoltaic (PV) modules With its advanced features and precise measurement capabilities, the PVA-1500T2 enables solar professionals to accurately assess the performance of PV modules With this tracer, issues such as shading, mismatch, degradation and other performance anomalies can be detected, allowing for quick troubleshooting and maintenance Intuitive interface and portable design make it easy to use both in the field and in the lab Provides comprehensive data analysis and reporting features, allowing technicians to make informed decisions to maximise the efficiency and reliability of solar installations Built with durability and reliability in mind and is an essential tool for solar professionals looking to optimise the performance and lifetime of individual PV systems. ds: dsc: Scope of delivery Solmetric 1500V PV Analyser 1 Soft case 1 Wrench set (MC4 spanners) 1 Measuring lead set MC4 to Dolphin clip 1 Concise reference card 1 Double-port PVA charging plug 2 PVA USB charging cables 2 MC4 connector savers 1 Sol sensor soft cover 1 Sol sensor 300 measuring unit 1 module frame clamp 1 pack of 2 type K thermocouples 1 pack of 50 self-adhesive discs for thermocouple attachment 1 Sol sensor lanyard 1 bottle of distilled water 1 Microfibre cleaning cloth kts: Solmetric PV Analyser IV Curve Tracer kpn: PVA-1500T2 kpn_dash: PVA kpn_clear: PVA1500T2 bkpn: FLUKE PVA-1500T2 bkpn_clear: FLUKE PVA1500T2 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Solar energy meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke solar energy meter sr_no_br_cl_ns: 5600022 sr_ns: FLUKE5600022
r: 08121738 p: 12192.413 pid: 166286 b: FLUKE q: 0 st: lt: 8 ean: 0195112123614 sr: FLUKE 5596792 sr_no_br: 5596792 sr_no_br_cl: 5596792 sr_cl: FLUKE5596792 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 754/FPC Documenting process calibrator with 1 year Premium Care - 5596792 cn: PROCESS CALIBRATOR cn2: PROCESS CALIBRATOR cn_clear: PROCESSCALIBRATOR d: Product description Complete pressure, temperature and mA loop calibrator Troubleshoot and calibrate intelligent digital HART transmitters Create calibration procedures and document results automatically Connect to calibration management software The Fluke Premium Care package gives you extra coverage on top of your standard warranty for things like accidental damage coverage, expedited calibration and replacement or repair of damaged accessories. ds: dsc: Scope of delivery 754 documenting process calibrator-HART BC7240 battery charger BP7240 Li-ion battery set NIST-traceable calibration report and data (3 sets) TP220 measuring probes (3 sets) crocodile clips with "extra long teeth" (2 sets) AC280 hook clamps C799 soft field bag USB communication cable 754HHC HART communication cable Quick guide kts: Documenting process calibrator with 1 year Premium Care kpn: 754/FPC kpn_dash: kpn_clear: 754FPC bkpn: FLUKE 754/FPC bkpn_clear: FLUKE 754FPC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Process calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke process calibrator sr_no_br_cl_ns: 5596792 sr_ns: FLUKE5596792
r: 08121740 p: 11804.614 pid: 166044 b: FLUKE q: 0 st: lt: 8 ean: 0195112129210 sr: FLUKE 6017815 sr_no_br: 6017815 sr_no_br_cl: 6017815 sr_cl: FLUKE6017815 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE ii500/FPC Acoustic Imager in case (with 1 year Premium Care) - 6017815 cn: LEAK DETECTOR cn2: LEAK DETECTOR cn_clear: LEAKDETECTOR d: Product description Simple, fast and safe visual detection of gas leaks. The 7-inch LCD touchscreen displays a SoundMap over visual images, making it easier to locate leaks quickly. Intuitive interface requires no training for maintenance teams. The Fluke ii500 Acoustic Imager with LeakQ helps maintenance teams detect, locate and prioritise gas leaks. Maintenance teams need no training and can now check for gas and vacuum leaks even during periods of peak production. The ii500 easily isolates the sound frequency of the leak to make leaks visible despite loud background noise. ds: dsc: Scope of delivery ii500 Acoustic Imager Mains adapter and battery charger (including universal mains adapters) Robust lithium-ion battery set USB cable Robust carrying case Adjustable carrying and neck strap Protective sensor array cover kts: Acoustic Imager in case (with 1 year Premium Care) kpn: ii500/FPC kpn_dash: kpn_clear: ii500FPC bkpn: FLUKE ii500/FPC bkpn_clear: FLUKE ii500FPC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Leak detector | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke leak detector sr_no_br_cl_ns: 6017815 sr_ns: FLUKE6017815
r: 08121731 p: 11499.958 pid: 166309 b: FLUKE q: 0 st: lt: 8 ean: 0195112120842 sr: FLUKE 5586801 sr_no_br: 5586801 sr_no_br_cl: 5586801 sr_cl: FLUKE5586801 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1775/FPC three-phase power quality analyser with 1 year Premium Care in carrying case - 5586801 cn: POWER QUALITY ANALYSER cn2: POWER QUALITY ANALYSER cn_clear: POWERQUALITYANALYSER d: Product description Automatically measures parameters for power and power quality Mains power quality status at a glance for faster fault finding Easily display data on V/A/Hz, power, drops, rises and harmonics Record fast transients of up to 8 kV Power supply directly from measurement circuit without a power cord ds: dsc: Scope of delivery 1775 Power Quality Analyzer I17XX-FLEX1500 18 iFLEX 1500A 18 IN (2.0M) current clamps (set of four) 17XX voltage measuring lead with flat cable 3-phase+N AC285 black alligator clips (set of four) AC285 green alligator clip Black 1m USB-C cable Power cord FLK-17XX-TL 0.18M measuring lead set Green measuring lead MP1-3R/1B magnetic probe set 174X-HANGER magnetic suspension kit 177X-4204 WIFI/BLE module Cable marking kit (for voltage and current) 174X-MA-C8 wall outlet adapter Black carrying case kts: three-phase power quality analyser with 1 year Premium Care in carrying case kpn: 1775/FPC kpn_dash: kpn_clear: 1775FPC bkpn: FLUKE 1775/FPC bkpn_clear: FLUKE 1775FPC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Power quality analyser | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke power quality analyser sr_no_br_cl_ns: 5586801 sr_ns: FLUKE5586801
r: 08106933 p: 11340.666 pid: 73448 b: FLUKE q: 0 st: lt: 8 ean: 0095969491754 sr: FLUKE 3405771 sr_no_br: 3405771 sr_no_br_cl: 3405771 sr_cl: FLUKE3405771 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 754 documenting process calibrator-HART - 3405771 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description Complete pressure, temperature and mA loop calibrator Troubleshoot and calibrate intelligent digital HART transmitters Create calibration procedures and document results automatically Connect to calibration management software Portable multifunction calibrator simplifies calibration tasks Whether you want to calibrate instruments, troubleshoot a problem or perform routine maintenance, the Fluke 754 with HART communication can help you get the job done faster. It performs many different tasks quickly and is the only process calibrator you need to carry with you. This rugged, reliable calibrator with integrated communication is ideal for calibrating, maintaining and re-measuring intelligent HART transmitters and other instruments. Measuring and generating capabilities AC/DC voltage mA loop with 24 V loop supply Pressure Thermocouples and RTDs Frequency Resistance Enhanced process calibration operation The bright white dual display shows both generated and measured parameters simultaneously. The rechargeable Li-ion battery provides up to 10 hours of continuous operation, allowing you to perform multiple tasks in succession without having to stop, and can also be connected directly to AC mains power if needed. Finally, you can communicate directly with intelligent digital HART transmitters via the mA measurement inputs for seamless calibration with fewer connections. Do more with less The 754 does the work of several instruments It generates, simulates and measures pressure, temperature and electrical signals in one rugged, pocket-sized device. Its powerful built-in HART interface can do almost all the day-to-day tasks you now perform with a separate digital communicator. It can quickly process pulsed RTD transmitters and PLCs, with pulses as short as 1 ms. The 754 also measures/generates pressure using all Fluke 750P series pressure modules as reference and includes many additional features such as: Custom automatic step and rise function Proprietary measurement units User-entered values during the test Testing of one- and two-point switches Root pull function for differential pressure-flow measurement Programmable measuring delay Download of procedures, lists and instructions The 754 is a multifunctional documenting calibrator that you can use to download software-created procedures, lists and instructions, or upload data for printing, archiving or analysis. The tool can store downloaded procedures and calibration data for up to a week and is compatible with many different device management software. Users can also create and run automated pre- or post-procedures to meet certain quality programmes or standards, and record and document the results. For documentation purposes, the 754 automates calibration procedures and records your data. And of course, it helps you comply with strict standards such as ISO 9000, FDA, EPA and OSHA. In addition, the graphic display, Li-ion battery for longer battery life, USB port and new accessories help you work smarter and faster. ds: dsc: Scope of delivery Fluke 754 documenting process calibrator-HART BC7240 battery charger BP7240 Li-ion battery set Trial subscription to DPCtrack2 calibration management software (download) (3 sets) stackable test leads (3 sets) TP220 probes (2 sets) AC280 SureGrip Hook Clamps (3 sets) AC175 crocodile clips (1) mini 10 cm stackable cord 754 suspension strap C799 soft carrying case with shoulder strap USB to mini USB communication cable 754 HART communication cable Traceable calibration certificate Software licence on CD-ROM Quick guide kts: documenting process calibrator-HART kpn: 754 kpn_dash: kpn_clear: 754 bkpn: FLUKE 754 bkpn_clear: FLUKE 754 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 3405771 sr_ns: FLUKE3405771
r: 08121739 p: 10353.54 pid: 166045 b: FLUKE q: 0 st: lt: 8 ean: 0195112126080 sr: FLUKE 5609242 sr_no_br: 5609242 sr_no_br_cl: 5609242 sr_cl: FLUKE5609242 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE ii500 Acoustic Imager in case - 5609242 cn: LEAK DETECTOR cn2: LEAK DETECTOR cn_clear: LEAKDETECTOR d: Product description Simple, fast and safe visual detection of gas leaks. The 7-inch LCD touchscreen displays a SoundMap over visual images, making it easier to locate leaks quickly. Intuitive interface requires no training for maintenance teams. The Fluke ii500 Acoustic Imager with LeakQ helps maintenance teams detect, locate and prioritise gas leaks. Maintenance teams need no training and can now check for gas and vacuum leaks even during periods of peak production. The ii500 easily isolates the sound frequency of the leak to make leaks visible despite loud background noise. ds: dsc: Scope of delivery ii500 Acoustic Imager Mains adapter and battery charger (including universal mains adapters) Robust lithium-ion battery set USB cable Robust carrying case Adjustable carrying and neck strap Protective sensor array cover kts: Acoustic Imager in case kpn: ii500 kpn_dash: kpn_clear: ii500 bkpn: FLUKE ii500 bkpn_clear: FLUKE ii500 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Leak detector | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke leak detector sr_no_br_cl_ns: 5609242 sr_ns: FLUKE5609242
r: 08121751 p: 10181.545 pid: 166316 b: FLUKE q: 0 st: lt: 8 ean: 0195112123669 sr: FLUKE 5596848 sr_no_br: 5596848 sr_no_br_cl: 5596848 sr_cl: FLUKE5596848 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 190-504/FPC 3YR ScopeMeter oscilloscope 500 Mhz 4 channels with 3 years Premium Care in case - 5596848 cn: OSCILLOSCOPE cn2: OSCILLOSCOPE cn_clear: OSCILLOSCOPE d: Product description Up to four independently floating isolated inputs, up to 1000 V Up to 5 GS/s real-time sampling (depending on the channels used) Deep memory: 10,000 points per scope line of the recorded waveform (Scope mode) Safety specification CAT III 1000 V/CAT IV 600 V for industrial environments Up to seven hours of battery operation with BP291 Large, bright colour display is easily visible in almost any environment Easy to store and display historical data and transfer to a PC via USB or WiFi Easily accessible battery door for quick battery change on site Protection class IP51, dust- and drip-proof Intelligent and automatic Connect-and-View trigger function for fast, slow and even complex signals Frequency spectrum via FFT analysis Automatic recording and reproduction of 100 screens ScopeRecord mode offers 30,000 measurement points per input channel, for analysing low-frequency signals TrendPlot paperless recorder with deep memory for automatic long-term measurements When you bundle the Fluke ScopeMeter 190-504 III measuring instrument with Fluke Premium Care, you get the most value for your money. Designed to take anywhere, the Fluke 190-504-III ScopeMeter measuring instruments are suitable for virtually any kind of troubleshooting on the go. These CAT III 1000 V/CAT IV 600 V measuring instruments combine rugged portability with the high performance of table oscilloscopes to help you meet the challenges of installing, commissioning and maintaining industrial machinery, automation, process control and power electronics - from DC to 500 MHz - with ease. The Fluke Premium Care package offers you extra coverage on top of your standard warranty for things like accidental damage coverage, expedited calibration and replacement or repair of damaged accessories. ds: dsc: Scope of delivery ScopeMeter 190-504-III Power adapter BC190/830 Power cord set BP291 Li-ion battery set VPS410-II probes (4x) Carrying strap USB cable TRM50 cable connector (4 pieces) Printed instructions kts: ScopeMeter oscilloscope 500 Mhz 4 channels with 3 years Premium Care in case kpn: 190-504/FPC 3YR kpn_dash: 190 kpn_clear: 190504FPC3YR bkpn: FLUKE 190-504/FPC 3YR bkpn_clear: FLUKE 190504FPC3YR c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Oscilloscope | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke oscilloscope sr_no_br_cl_ns: 5596848 sr_ns: FLUKE5596848
r: 08107098 p: 10057.029 pid: 71806 b: FLUKE q: 0 st: lt: 8 ean: 0095969856959 sr: FLUKE 4920767 sr_no_br: 4920767 sr_no_br_cl: 4920767 sr_cl: FLUKE4920767 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1748/15/EUS three-phase Power Quality Logger 60cm 1500A iFlex current clamps, EU/US version - 4920767 cn: POWER QUALITY ANALYSER cn2: POWER QUALITY ANALYSER cn_clear: POWERQUALITYANALYSER d: Product description Hardware features Measure the three voltage and current phases plus the neutral: Three-phase and neutral voltage leads and four flexible current clamps. Extended log function: more than 20 individual log sessions can be stored in the instrument. A comprehensive range of current and power quality variables is automatically recorded, so you will not miss a single measurement trend. Measuring with very high accuracy: complies with the strict standard IEC 61000-4-30 Class A, Edition 3 for 'Test and measurement techniques: methods for measuring mains power quality'. Capture voltage fluctuations and interruptions: The 1748 contains snapshots of event waveforms and an RMS event profile, along with the date, time stamp and event severity information, to identify possible root causes of mains power quality problems. Measure key power quality parameters: Measure harmonics and interharmonics for voltage and current, including unbalance, flicker and rapid voltage changes. Optimised user interface: Always capture the correct data with a fast, interactive graphical PC installer and remove uncertainty about connections with the intelligent verification function and the only automatic correction function available for a Power Quality Logger. Connection errors are automatically indicated by an orange light on the unit's power button, which turns green once the error has been corrected. Optimised user interface: Quick, graphical settings for which additional information is available allow you to capture the correct data every time, and the intelligent check function ensures that the correct connections have been made, reducing user uncertainty Flexible power supply: Switches on directly from the measured circuit with the widest range available for a Power Quality Logger (automatically from 100 V to 500 V), or switches on with a power cable for a wall outlet, so you can test anywhere Robust and reliable: Designed for demanding installation environments with IP65 protection rating when used with IP65 voltage input adapter. Two external USB ports: One for connection to a PC and another for quick and easy download of data to a standard USB stick or other USB devices, allowing you to leave the measuring instrument in place without interrupting the logging function. Ethernet connectivity: Wired and wireless connections for installing the instrument and quickly downloading data. Compact size: With its modest size of 23 cm x 18 cm x 5.4 cm (9.1 inches x 7.1 inches x 2.1 inches), it fits into small rooms and dividers. Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III approved for service input and downstream circuits. Optimised measuring accessories: Unique flat voltage cable that cannot get tangled and thin, flexible current clamps make installation easy even in tight spaces. Battery life: Operating time of four hours (backup time) per charge on a lithium-ion battery, to cope with temporary power failures. Security: Protect your precious property from theft with a standard security chain or other security. Magnetic hanging clip set: quickly and safely store the instrument in or outside electrical dividers. Suitable for all models and supplied as standard with the 1748 model. Software functions Settings and download for "In-workshop" or "In-the-Field" via PC application software: Simple download using USB stick, wifi download, Ethernet cable connection or via USB cable. Application software Energy Analyze Plus: Download and analyse every measured detail of energy consumption and power quality condition with automatic reports. One-button reports: Create standard reports according to common standards such as EN 50160, IEEE 519, GOST 33073 or export data in a PQDIF or NeQual-compatible format for use with third-party software. Advanced analysis: choose from all available logged parameters to create a customised display of logged measurements for advanced data linking. Features The compact and rugged Fluke 1740 Series Power Quality Loggers are designed specifically for technicians who need flexibility to troubleshoot, calculate energy consumption and analyse power distribution systems. Fully compliant with international power quality standards such as IEC 61000-4-30, the Fluke 1740 series can simultaneously log up to 500 parameters and record events. Moreover, tracing intermittent and hard-to-locate power supply problems is easier than ever. With the integrated Energy Analyze Plus software, mains power quality at the service input, distribution station or load can be quickly assessed according to national and international standards such as EN50160 and IEEE 519. Installation is easier than ever and reduces measurement uncertainty thanks to an optimised user interface, flexible current probes and an intelligent measurement monitoring function that allows you to check and correct connections digitally. A Wi-Fi connection allows data to be viewed directly on site. This not only reduces the time spent in a potentially hazardous environment, but also eliminates the 'hassle' of donning personal protective equipment. The Fluke 1748 logs more than 500 different parameters for each averaging period. This allows you to analyse mains power quality in detail and link intermittent events to detailed waveform data to identify the root cause of faults. The Fluke 1746 captures all relevant power supply parameters for basic recording of mains power quality, for energy-saving surveys and electrical network planning, with the option of a full upgrade to 1748. For simple load and energy surveys, the Fluke 1742 offers optimum performance in a rugged package. The 1742 can be upgraded to the 1746 or to the full functionality of the 1748. ds: dsc: Scope of delivery Fluke 1748 logger Soft storage bag/case Voltage test cable (3-phase + N) Alligator clips (blue) (x2) Alligator clips (black) (x4) Set of cable markers Mains cable Mains adapter MA-C8 Set of 2 measure leads (stackable and non-stackable, blue, 7 inches) Set of 2 measure leads (non-stackable, blue, 79 inches) USB cable Magnetic hook set Magnetic probes (x4) i17xx-flex1500IP 24-inch current probes (x4) WiFi/BLE to USB adapter kts: three-phase Power Quality Logger 60cm 1500A iFlex current clamps, EU/US version kpn: 1748/15/EUS kpn_dash: kpn_clear: 174815EUS bkpn: FLUKE 1748/15/EUS bkpn_clear: FLUKE 174815EUS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Power quality analyser | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke power quality analyser sr_no_br_cl_ns: 4920767 sr_ns: FLUKE4920767
