r: 02951794 p: 675.429 pid: 71165 b: FLUKE q: 0 st: lt: 8 ean: 0095969345095 sr: FLUKE 2584920 sr_no_br: 2584920 sr_no_br_cl: 2584920 sr_cl: FLUKE2584920 sr_dash: sold: 675.429 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE i30 AC/DC current clamp - 2584920 cn: CURRENT CLAMP cn2: CURRENT CLAMP cn_clear: CURRENTCLAMP d: Product description: The i30 current clamp uses Hall Effect technology to measure both direct and alternating current. Can be used with multimeters, recorders and other suitable recording instruments to accurately measure current without the need to interrupt the circuit. ds: dsc: kts: AC/DC current clamp kpn: i30 kpn_dash: kpn_clear: i30 bkpn: FLUKE i30 bkpn_clear: FLUKE i30 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Current clamp | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke current clamp sr_no_br_cl_ns: 2584920 sr_ns: FLUKE2584920
r: 02958118 p: 22.479 pid: 72216 b: FLUKE q: 0 st: lt: 5 ean: 0095969261289 sr: FLUKE 2149102 sr_no_br: 2149102 sr_no_br_cl: 2149102 sr_cl: FLUKE2149102 sr_dash: sold: 651.891 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TP88 robust backprobe pens - 2149102 cn: TEST PROBE SET cn2: TEST PROBE SET cn_clear: TESTPROBESET d: Product description: Better than just a measuring probe - these 51 mm long backprobe pins fit easily between weather seal and wire. A sharp tip ensures good contact with the electrical connector and the pin's insulation protects it from shorting with other wires. Key features Can be slid onto 2 mm (0.08 inch) measuring probes Tested up to 60 V DC voltage ds: dsc: kts: robust backprobe pens kpn: TP88 kpn_dash: kpn_clear: TP88 bkpn: FLUKE TP88 bkpn_clear: FLUKE TP88 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Test probe set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke test probe set sr_no_br_cl_ns: 2149102 sr_ns: FLUKE2149102
r: 03045039 p: 639.892 pid: 72946 b: FLUKE q: 0 st: lt: 8 ean: 0095969493802 sr: FLUKE 3448783 sr_no_br: 3448783 sr_no_br_cl: 3448783 sr_cl: FLUKE3448783 sr_dash: sold: 639.892 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 200 kHz Max. resistance 50 MOhm n: FLUKE 87V/IMSK service combination set industrial multimeter - 3448783 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product Description Fluke-87V multimeter features True-RMS accuracy and advanced features for desired results The Fluke-i400 AC 400A current clamp turns the 87V into a current meter Includes special accessories such as temperature measuring probe, test leads and crocodile clips This combination set was created based on the Fluke 87V, the world's most widely used industrial digital multimeter, combined with the i400 AC current clamp. Together, they provide the resolution and accuracy to efficiently troubleshoot any electrical system. The set includes special accessories that allow you to be even more productive and brings savings of more than 15% compared to the individual prices of all accessories. Plus, you'll be working with the most trusted tools in the world. The Fluke-87V multimeter features True-RMS accuracy and advanced features for the results you want True-RMS accuracy with manual and automatic range setting, display hold, auto hold and min/max recording Efficiently troubleshoot motor drives, factory automation, power distribution and electromechanical equipment, even in high noise, high current and altitude locations. A low-pass filter supports accurate frequency measurements on VFDs and records ultra-short interruptions of up to 250 µs. Lifetime warranty by a brand you trust. The Fluke-i400 AC 400A current clamp turns the 87V into a current meter Current clamp provides accurate current measurements up to 400A AC without interrupting electrical circuits Enables safe measurement according to industry safety standards. Special accessories such as temperature measuring probe, measuring leads and crocodile clips The 80BK-A DMM temperature measuring probe can be connected to the voltage terminals of the 87V, allowing temperature measurements from -40 °C to 260 °C (-40 °F to 500 °F). TL75 measurement leads and AC175 crocodile clips complete this versatile set. Main safety features The meter's safety specification CAT III 1000 V, CAT IV 600 V ensures that you can do your job safely. Resistant to spikes of over 8000 V. Input Alert gives an audible warning if inputs are misused. ds: dsc: Scope of delivery Fluke 87V industrial multimeter Fluke i400 400 A AC current clamp 80BK-A DMM temperature measuring probe TL75 Hard Point measuring lead set AC175 Alligator clip set with screw thread kts: service combination set industrial multimeter kpn: 87V/IMSK kpn_dash: kpn_clear: 87VIMSK bkpn: FLUKE 87V/IMSK bkpn_clear: FLUKE 87VIMSK c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3448783 sr_ns: FLUKE3448783
r: 02958217 p: 70.578 pid: 72232 b: FLUKE q: 0 st: lt: 5 ean: 0095969087513 sr: FLUKE 1567573 sr_no_br: 1567573 sr_no_br_cl: 1567573 sr_cl: FLUKE1567573 sr_dash: sold: 635.202 p_range: none type: standard act: 1 avo: 1 av: Quantity per set 5 n: FLUKE TP40 automotive back probes (5 pcs) - 1567573 cn: TEST PROBE SET cn2: TEST PROBE SET cn_clear: TESTPROBESET d: Product description: The 3.2 cm (1-¼ inch) flexible and deformable pin provides easy connection along weather pack seals to connector conductors. Tested to more than 60 V DC, these pins are indispensable for fuel injectors, TPS and MAP sensors as well as all connectors with weather pack seals under the bonnet or under the vehicle. The bright yellow housing stands out in an engine compartment, so they will not be left behind. Easily connects to test leads that have loose ends, such as the TL224. Key features Banana socket suitable for all test leads with DMM and banana plugs Tested up to 60V DC voltage ds: dsc: kts: automotive back probes (5 pcs) kpn: TP40 kpn_dash: kpn_clear: TP40 bkpn: FLUKE TP40 bkpn_clear: FLUKE TP40 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Test probe set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke test probe set sr_no_br_cl_ns: 1567573 sr_ns: FLUKE1567573
r: 03388755 p: 119.178 pid: 178052 b: FLUKE q: 0 st: lt: 4 ean: 0095969624213 sr: FLUKE 6101428 sr_no_br: 6101428 sr_no_br_cl: 6101428 sr_cl: FLUKE6101428 sr_dash: sold: 595.89 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size AAA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test No Max. current AC/DC 400 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity No Measurement frequency No Measurement resistance No Current measurement Yes Measurement voltage Yes n: FLUKE 302+ digital current clamp - 6101428 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Compact digital current clamp, flexible and easy to use For everyday applications where True RMS accuracy is not required Small enough to fit in a work bag, robust enough to withstand daily use Measures alternating current up to 400 A Large 30 mm jaw High accuracy of 1.8% Illuminated display Recommended for universal measurements Safety specification CAT II 1000 V, 10 A CAT IV 600 V, CAT III 1000 V only with protective cover Meets safety specification CAT IV 300 V/CAT III 600 V Two-year warranty ds: dsc: Scope of delivery TL75 Hard Point measuring lead set 1.22m with PVC insulation and angled insulated banana plugs kts: digital current clamp kpn: 302+ kpn_dash: kpn_clear: 302 bkpn: FLUKE 302+ bkpn_clear: FLUKE 302 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 6101428 sr_ns: FLUKE6101428
r: 02908849 p: 94.545 pid: 71744 b: FLUKE q: 0 st: lt: 8 ean: 0095969400084 sr: FLUKE 2826063 sr_no_br: 2826063 sr_no_br_cl: 2826063 sr_cl: FLUKE2826063 sr_dash: sold: 567.27 p_range: none type: standard act: 1 avo: 1 av: Accessory/Part type Case n: FLUKE C115 carrier bag - 2826063 cn: ACCESSORY/PART MEASURING TOOL cn2: ACCESSORY/PART MEASURING TOOL cn_clear: ACCESSORYPARTMEASURINGTOOL d: Product description: Soft carrying case, including two padded compartments to protect two measuring instruments, such as a digital multimeter and a 60-series infrared thermometer, and a pocket for measuring leads and other accessories. Sturdy 600D polyester construction for a long service life. Suitable for Fluke series 20, 70, 11X and 170 digital multimeters and other similarly sized measuring instruments. One-year warranty. ds: dsc: kts: carrier bag kpn: C115 kpn_dash: kpn_clear: C115 bkpn: FLUKE C115 bkpn_clear: FLUKE C115 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessory/part measuring tool | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessory/part measuring tool sr_no_br_cl_ns: 2826063 sr_ns: FLUKE2826063
r: 02957787 p: 50.371 pid: 71360 b: FLUKE q: 0 st: lt: 5 ean: 0095969528887 sr: FLUKE 3565554 sr_no_br: 3565554 sr_no_br_cl: 3565554 sr_cl: FLUKE3565554 sr_dash: sold: 554.081 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TL175E TwistGuard test leads with 4 mm lantern tips - 3565554 cn: TEST LEAD SET cn2: TEST LEAD SET cn_clear: TESTLEADSET d: Product description: One pair (red, black) TL175E TwistGuard test leads Variable tip length from 19 mm to 4 mm (0.75 inch to 0.16 inch) Removable 4 mm lantern tips for greater flexibility Complies with EN61010-031 Ratings: CAT II 1000 V, CAT III 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max, pollution degree 2 ds: dsc: kts: TwistGuard test leads with 4 mm lantern tips kpn: TL175E kpn_dash: kpn_clear: TL175E bkpn: FLUKE TL175E bkpn_clear: FLUKE TL175E c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Test lead set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke test lead set sr_no_br_cl_ns: 3565554 sr_ns: FLUKE3565554
r: 02951010 p: 548.983 pid: 71951 b: FLUKE q: 0 st: lt: 8 ean: 0095969586726 sr: FLUKE 3947847 sr_no_br: 3947847 sr_no_br_cl: 3947847 sr_cl: FLUKE3947847 sr_dash: sold: 548.983 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 200 kHz Max. resistance 50 MOhm n: FLUKE 83 V digital multimeter for industrial use - 3947847 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Accuracy and diagnostic features for optimum industrial productivity The new Fluke 83 V has enhanced measurement and troubleshooting functions, higher resolution and greater accuracy for troubleshooting even more faults in motor drives, business automation, power distribution devices and electromechanical equipment. The 80 Series V shares many similarities with the classic 80 Series, but offers more troubleshooting capabilities, even greater safety, even more ease of use and better protection against impacts. The new 80 Series V has been independently tested and complies with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V/CAT III 1000 V. The instruments can withstand impulses in excess of 8,000 V and reduce the risks posed by power surges and spikes. Key features Optional magnetic hanging clip for easy installation and reading while leaving your hands free for other tasks. With its large-digit display and bright backlight with two levels of illumination, the 80 Series V is significantly easier to read than older models. Electrical safety All inputs are protected in accordance with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V and CAT III, 1000 V. The instruments can withstand impulses in excess of 8,000 V and reduce the risks associated with power surges and spikes. ds: dsc: Scope of delivery TL75 measuring leads AC175 crocodile clips Holster 9 V battery (fitted) kts: digital multimeter for industrial use kpn: 83 V kpn_dash: kpn_clear: 83V bkpn: FLUKE 83 V bkpn_clear: FLUKE 83V c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3947847 sr_ns: FLUKE3947847
r: 08106973 p: 523.694 pid: 158654 b: FLUKE q: 0 st: lt: 8 ean: 0095969973960 sr: FLUKE 5195045 sr_no_br: 5195045 sr_no_br_cl: 5195045 sr_cl: FLUKE5195045 sr_dash: sold: 523.694 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z Yes Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 40 MOhm n: FLUKE IB117K/EUR digital multimeter 117 + VDE hand tool set 8-piece in roll-up carrying case - 5195045 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Designed by electricians. Manufactured by Fluke Compact True-rms meter for commercial applications. The Fluke 117 is the ideal meter for high-demand buildings such as commercial buildings, hospitals and schools. The 117 has a non-contact voltage detection feature for faster work. Key features VoltAlert technology for non-contact voltage detection AutoVolt automatic selection of AC/DC voltage Low input impedance: helps prevent erroneous readings due to phantom voltage Large display with white LED backlight for use in dimly lit environments True-rms for accurate measurements at non-linear loads Measures 20 A (momentary up to 30 seconds, 10 A continuous) Resistance, continuity, frequency and capacitance Provides Min/Max/Average for recording signal fluctuations Compact ergonomic design for one-handed operation. Suitable for the optional magnetic suspension system (ToolPak) for hands-free use Safety specification CAT III 600 V ds: dsc: Scope of delivery 117 multimeter for electricians ISLS3 insulated slotted screwdriver 3/32, 3" ISLS5 insulated slotted screwdriver 5/32, 4" ISLS8 insulated slotted screwdriver 1/4, 5" IPHS1 insulated Philips screwdriver #1, 3" IPHS2 insulated Philips screwdriver no. 2, 4" INLP8 insulated tip pliers with side cutting edge and gripping zones INDC8 insulated high leverage side cutters in heavy-duty design INCP8 heavy-duty insulated combination pliers RUP8 roll-up carrying case kts: digital multimeter 117 + VDE hand tool set 8-piece in roll-up carrying case kpn: IB117K/EUR kpn_dash: kpn_clear: IB117KEUR bkpn: FLUKE IB117K/EUR bkpn_clear: FLUKE IB117KEUR c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5195045 sr_ns: FLUKE5195045
r: 02951730 p: 506.285 pid: 72651 b: FLUKE q: 0 st: lt: 8 ean: 0095969345088 sr: FLUKE 2584912 sr_no_br: 2584912 sr_no_br_cl: 2584912 sr_cl: FLUKE2584912 sr_dash: sold: 506.285 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE i2000 Flex AC current clamp 20 A / 200 A / 2000 A - 2584912 cn: CURRENT CLAMP cn2: CURRENT CLAMP cn_clear: CURRENTCLAMP d: Product description: The i2000 is an AC current clamp that operates on the Rogowski principle. Can be used for current measurements up to 2000 A when used in combination with multimeters, recorders or data loggers. Thanks to the flexible lightweight measuring head, quick and easy to install in hard-to-reach places. Key features Three ranges: 20 A, 200 A and 2000 A, 100 mV/A, 10 mV/A and 1 mV/A output Ideal for current measurements on thick and hard-to-reach conductors, without having to interrupt the circuit Maximum conductor diameter 178 mm Safety specification CAT III 600 V ds: dsc: kts: AC current clamp 20 A / 200 A / 2000 A kpn: i2000 Flex kpn_dash: kpn_clear: i2000Flex bkpn: FLUKE i2000 Flex bkpn_clear: FLUKE i2000Flex c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Current clamp | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke current clamp sr_no_br_cl_ns: 2584912 sr_ns: FLUKE2584912
r: 02951714 p: 238.292 pid: 71127 b: FLUKE q: 0 st: lt: 10 ean: 0095969063937 sr: FLUKE 664755 sr_no_br: 664755 sr_no_br_cl: 664755 sr_cl: FLUKE664755 sr_dash: sold: 476.584 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE i200 AC current clamp - 664755 cn: CURRENT CLAMP cn2: CURRENT CLAMP cn_clear: CURRENTCLAMP d: Product description: Small, handy AC current clamp Fluke current clamps are the ideal tools for extending the current range of multimeters. AC current clamp with a single measurement range of 200 A and current output via banana plugs fitted with safety insulation. Compatible with most Fluke multimeters or any other current measuring instrument suitable for safety-insulated banana plugs. Key features Handy with your DMM for measurements up to 200A AC 1mA/Amp output for easy reading of your meter Makes accurate current measurements without interrupting the circuit Max. Conductor Ø 20 mm Safety specification CAT III 600 V ds: dsc: kts: AC current clamp kpn: i200 kpn_dash: kpn_clear: i200 bkpn: FLUKE i200 bkpn_clear: FLUKE i200 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Current clamp | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke current clamp sr_no_br_cl_ns: 664755 sr_ns: FLUKE664755
r: 08107143 p: 474.71 pid: 71814 b: FLUKE q: 0 st: lt: 10 ean: 0195112016602 sr: FLUKE 5265319 sr_no_br: 5265319 sr_no_br_cl: 5265319 sr_cl: FLUKE5265319 sr_dash: sold: 474.71 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TRUTEST-ADV Software licence code for TruTest Advanced - 5265319 cn: SOFTWARE cn2: SOFTWARE cn_clear: SOFTWARE d: Product description Easily manage measurement data, including installation and commissioning tests for solar sites through an intuitive and modern interface Quickly create test certificates and reports Free updates for 5 years after installation Easy data collection and database transfers Includes The ability to set up TruTest on 1 workstation The ability to assign an unlimited number of users to that TruTest workstation The easy-to-use data management solution The Fluke TruTest software is designed to eliminate the problems associated with traditional data management and reporting of electrical systems. Whether you are testing installations with fixed wiring or devices in an office, checking repair results in a workshop or performing annual inspections, good data management is essential for creating understandable reports for customers. Compatible with a growing number of test and measurement instruments from Fluke and Beha-Amprobe. TruTest software allows you to quickly and easily import measurement results directly from your measuring instruments, manage files transferred from instruments or manually enter data if required. With a streamlined user interface and intuitive workflow, measurement data can be easily formatted into printable test certificates and reports, complete with your company logo and electronic signature. Solar reporting solution Fluke TruTest software now supports the SMFT-1000 multifunction PV tester and performance analyser. Whether you are analysing panel efficiency via I-V curves or testing the system for safety via the Category 1 test regime in accordance with IEC 62446-1, good data management is crucial for producing easy-to-understand reports for customers. Import measurement results directly from your multifunction solar tester to the computer, organise and analyse the data, compare individual device data with previously imported measurements and deliver a comprehensive and visual customer report. Streamlined data management Manage test results and customer and location data with ease and quickly create reports with the intuitive user interface and report builder. Create customised automatic tests Choose from predefined automatic test codes or create your own to ensure technicians collect the right data at the right location. Dashboard interface With the live intuitive on-screen dashboard interface, users can instantly see the status of all their clients and navigate to detail level if required. Compatibility Fluke SMFT-1000 Fluke 6500 Fluke 6500-2 Beha-Amprobe GT-600 Beha-Amprobe GT-650 Beha-Amprobe GT-800 Beha-Amprobe GT-900 Fluke 1653 Fluke 1653B Fluke 1654B Fluke 1662 Fluke 1663 Fluke 1664 FC Beha-Amprobe ProInstall-100 Beha-Amprobe ProInstall-200 Databases from the Fluke DMS software or the Beha-Amprobe ES control software can also be converted and transferred to the TruTest software platform*. Microsoft Access Runtime 2016 is required for the DMS/EsControl database conversion. Comprehensive reporting Fluke's TruTest software simplifies the reporting process, allowing you to generate easy-to-understand test certificates and reports as quickly as possible, saving you time and money. A growing list of regional reports, including DIN VDE 0701-0702, ÖVE/ÖNORM E 8701, SNR 462638, NEN3140, IEC 62446-1 and EU directive 2009/104/EC (BetrSichV). All these reports are available at the touch of a button, and a preconfigured international template ensures that the TruTest software covers every location. Structure topology Hierarchical tree topology is used to represent clients, locations and devices. This makes the application ideal for use in larger networks, while keeping you flexible in terms of testing and reporting. Each element is displayed as a single structure node and the properties of each node are displayed after selecting it. The tree topology can be maintained by adding, deleting, copying and/or editing nodes and copying sub-trees. ds: dsc: kts: Software licence code for TruTest Advanced kpn: TRUTEST-ADV kpn_dash: TRUTEST kpn_clear: TRUTESTADV bkpn: FLUKE TRUTEST-ADV bkpn_clear: FLUKE TRUTESTADV c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Software | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke software sr_no_br_cl_ns: 5265319 sr_ns: FLUKE5265319
