r: 02773467 p: 333.611 pid: 72427 b: FLUKE q: 0 st: lt: 7 ean: 0095969344838 sr: FLUKE 2583601 sr_no_br: 2583601 sr_no_br_cl: 2583601 sr_cl: FLUKE2583601 sr_dash: sold: 8673.886 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature Yes Digital Yes Battery type 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Measurement Lo-Z Yes Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency No Measurement resistance Yes Current measurement No Measurement voltage Yes Max. electrical capacity 1000 µF Max. resistance 40 MOhm n: FLUKE 116 compact HVAC multimeter up to 600V AC/DC - with temperature and microampere measurement - 2583601 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Designed by electricians. Manufactured by Fluke. Compact True-rms meter for troubleshooting in heating, ventilation and air-conditioning (HVAC) equipment. The Fluke 116 is designed specifically for HVAC specialists. It has all the features an HVAC meter needs, including temperature and microampere measurement, to quickly troubleshoot problems in HVAC devices and flame sensors. Also check out the Fluke 114 electrical multimeter, the Fluke 115 multimeter, and the Fluke 117, the multimeter with non-contact voltage locator for electricians. Key features Built-in thermometer for HVAC applications Microampere measurement for testing flame sensors Low input impedance: helps prevent erroneous readings due to phantom voltage Large display with white LED backlight for use in dimly lit environments Resistance, continuity, frequency and capacitance Provides Min / Max / Average for recording signal fluctuations Compact ergonomic design for one-handed operation. Suitable for the optional magnetic suspension system (ToolPak) Safety specification CAT III 600 V ds: dsc: Scope of delivery 116 digital multimeter 4 mm silicone measuring lead set 80BK integrated temperature measuring probe Yellow protective snap-on casing Installed 9 V battery User's manual kts: compact HVAC multimeter up to 600V AC/DC - with temperature and microampere measurement kpn: 116 kpn_dash: kpn_clear: 116 bkpn: FLUKE 116 bkpn_clear: FLUKE 116 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 2583601 sr_ns: FLUKE2583601
r: 02957878 p: 1075.707 pid: 71377 b: FLUKE q: 0 st: lt: 9 ean: 0095969803083 sr: FLUKE 4709907 sr_no_br: 4709907 sr_no_br_cl: 4709907 sr_cl: FLUKE4709907 sr_dash: sold: 8605.656 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 368 FC True RMS wireless leakage current clamp with 40 mm jaw opening - 4709907 cn: CURRENT CLAMP cn2: CURRENT CLAMP cn_clear: CURRENTCLAMP d: Product description: Reduce downtime: detect leakage current without turning equipment off The Fluke 368 FC True RMS leakage current clamp helps users measure, document, record and compare leakage current readings over time. This is to prevent unplanned downtime and identify intermittent tripping by RCDs. Without the need to switch off equipment. The Fluke 368 FC has a large jaw opening of 40 mm for work with large conductors. The jaws of the pliers are fully shielded to accurately record very small leakage currents and minimise external electromagnetic interference. The 368 FC also offers wireless data connectivity via Fluke Connect. As part of Fluke Connect ? the industry's largest system of software and (over 40) wireless test and measurement tools ? the 368 FC allows you to track changes in leakage current over time. This allows you to identify potential problems before they become serious failures. Key features True RMS measurements for accuracy when measuring complex, non-sinusoidal waveforms Jaw opening of 40 mm Highest resolution of 1 ?A, measurements up to 60 A Selectable filter function that eliminates unwanted noise Max/Min/Average measurement values and Hold function (freeze display) Front-facing LED work light for use in dark cable cabinets Backlit display; automatic backlight and automatic display shutdown for extended battery life Safety specification CAT III 600 V Logging internal memory: up to 65,000 measurement points ds: dsc: Scope of delivery Fluke 368 leakage current clamp Soft carrying case Safety manual 2 AA batteries kts: True RMS wireless leakage current clamp with 40 mm jaw opening kpn: 368 FC kpn_dash: kpn_clear: 368FC bkpn: FLUKE 368 FC bkpn_clear: FLUKE 368FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Current clamp | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke current clamp sr_no_br_cl_ns: 4709907 sr_ns: FLUKE4709907
r: 41985214 p: 330 pid: 82766 b: FLUKE q: 0 st: lt: 6 ean: 0095969599474 sr: FLUKE 4014969 sr_no_br: 4014969 sr_no_br_cl: 4014969 sr_cl: FLUKE4014969 sr_dash: sold: 8580 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 9040EUR phase rotation indicator - 4014969 cn: PHASE SEQUENCER TESTER cn2: PHASE SEQUENCER TESTER cn_clear: PHASESEQUENCERTESTER d: Product description: High-voltage phase rotation indicator for industrial applications The Fluke 9040 is suitable for measuring phase rotation wherever three-phase power supplies are used to power motors, drives and electrical systems. The Fluke 9040 is a rotating field indicator and provides a clear indication of the three-phase voltage and phase rotation direction via an LCD display, allowing the correct connections to be determined. The phase sequence can be quickly determined and it has a voltage range (up to 700 V) and frequency range suitable for commercial and industrial applications. The measuring probes supplied with the instrument have a variable clamping range to allow safe contact, especially with industrial sockets. Key features Three-phase indication Phase rotation indication Clear LCD display No battery required ds: dsc: Scope of delivery 9040 phase rotation indicator 3 Slim-Reach measuring probes (black) 3 self-clamping measuring probes 3 crocodile clips Operating instructions kts: phase rotation indicator kpn: 9040EUR kpn_dash: kpn_clear: 9040EUR bkpn: FLUKE 9040EUR bkpn_clear: FLUKE 9040EUR c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Phase sequence tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke phase sequence tester sr_no_br_cl_ns: 4014969 sr_ns: FLUKE4014969
r: 02951148 p: 1224.196 pid: 72576 b: FLUKE q: 0 st: lt: 13 ean: 0095969797290 sr: FLUKE 4692725 sr_no_br: 4692725 sr_no_br_cl: 4692725 sr_cl: FLUKE4692725 sr_dash: sold: 8569.372 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1587/I400 FC digital insulation multimeter with i400 AC current clamp - 4692725 cn: INSULATION RESISTANCE TESTER cn2: INSULATION RESISTANCE TESTER cn_clear: INSULATIONRESISTANCETESTER d: Product description: Includes the Fluke 1587 FC 2-in-1 insulation DMM and the Fluke i400 current clamp The Fluke 1587 FC insulation multimeter with four powerful new diagnostic features via the Fluke Connect Measurements app: Timed PI/DAR ratio tests with TrendIt graphs identify moisture and contaminated insulation problems faster Memory storage via Fluke Connect, eliminating the need to write down results, reducing errors and saving data for later tracking over time Temperature compensation via the app for establishing accurate baselines and relevant historical comparisons Historical tracking of equipment and recording of trends reveals equipment deterioration over time and enables real-time on-site decisions with Fluke Connect Assets The Fluke i400 AC current clamp is a high-security current clamp for digital multimeters. The current clamp provides accurate current measurements without interrupting the electrical circuit, allowing you to measure safely according to industry safety standards. Key features With the Fluke 1587 FC, perform insulation tests with confidence and ease plus a wide range of DMM tasks Use the Fluke i400 together with your Fluke 1587 FC to accurately measure AC current without interrupting the power circuit The Fluke 1587 FC 2-in-1 Insulation DMM PI/DAR measurements with TrendIt graphs Memory storage via the Fluke Connect Measurements app Temperature compensation via the Fluke Connect Measurements app Low-pass filter for frequency-controlled drives, for accurate measurements on motor drives Insulation test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V Insulation test voltages: 500 V and 1000 V Insulation test: 0.01 M? to 2.0 G? Insulation test: 0.1 M? to 600 M? Automatic discharge of capacitive voltages Smoothed reading of insulation test values Frequency/capacitance/diode test/temperature Min/max / AC/DC voltage / DC in millivolts / AC/DC in milliamps Resistance (0.1 ? to 50 M?) / continuity / automatic switch-off 3-year warranty/external probe, test leads, alligator clips, type K thermocouple, carrying case Fluke i400 AC current clamp Use your Fluke 1587 FC to measure 1 A AC to 400 A AC 1 mA/Amp output for easy reading Overvoltage standard CAT III 1000 V / CAT IV 600 V for added user protection Specially designed for maximum functionality in a compact form Maximum conductor Ø: 32 mm 1 year warranty ds: dsc: Scope of delivery Fluke 1587 FC 2-in-1 insulation DMM Fluke i400 current clamp External probe Test leads Alligator clips Thermocouple type K Carrying case User documentation kts: digital insulation multimeter with i400 AC current clamp kpn: 1587/I400 FC kpn_dash: kpn_clear: 1587I400FC bkpn: FLUKE 1587/I400 FC bkpn_clear: FLUKE 1587I400FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Insulation resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke insulation resistance tester sr_no_br_cl_ns: 4692725 sr_ns: FLUKE4692725
r: 08106986 p: 3877.743 pid: 166158 b: FLUKE q: 0 st: lt: 8 ean: 0095969856379 sr: FLUKE 4918373 sr_no_br: 4918373 sr_no_br_cl: 4918373 sr_cl: FLUKE4918373 sr_dash: sold: 7755.486 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 805 FC/805 ES vibration meter and external vibration sensor in carrying case - 4918373 cn: VIBRATION METER cn2: VIBRATION METER cn_clear: VIBRATIONMETER d: Product description Easy setup - Quickly list devices and work order on your PC, set machine profiles with the Fluke Connect app on your smart device, move routes to your 805 FC for your on-site technicians. Consistent data quality - Take accurate, reliable measurements at both low and high frequency ranges Mobile access to data - Store results in the cloud and share data remotely with your team Innovative sensor design - Innovative sensor design minimises measurement differences due to instrument angle and contact pressure ds: dsc: Scope of delivery 805 FC vibration meter USB cable Belt holster Quick guide Two (2) AA batteries External vibration sensor Carrying case kts: vibration meter and external vibration sensor in carrying case kpn: 805 FC/805 ES kpn_dash: kpn_clear: 805FC805ES bkpn: FLUKE 805 FC/805 ES bkpn_clear: FLUKE 805FC805ES c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Vibration meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke vibration meter sr_no_br_cl_ns: 4918373 sr_ns: FLUKE4918373
r: 02958443 p: 7667.619 pid: 72243 b: FLUKE q: 0 st: lt: 8 ean: 0095969620321 sr: FLUKE 4131397 sr_no_br: 4131397 sr_no_br_cl: 4131397 sr_cl: FLUKE4131397 sr_dash: sold: 7667.619 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 985 particle counter in carrying case - 4131397 cn: PARTICLE COUNTER cn2: PARTICLE COUNTER cn_clear: PARTICLECOUNTER d: Product description: The Fluke 985 particle counter is the first choice for HVAC (heating, ventilation and air conditioning) and IAQ (indoor air quality) professionals. From filter testing to indoor air quality surveys, the Fluke 985 is the portable solution for determining suspended particle concentrations. Use the Fluke 985 to respond immediately to building occupant complaints or as part of a comprehensive preventive maintenance programme. With a large screen, intuitive icons for navigation and on-screen data display, Fluke 985 users can quickly run more tests and less time is wasted going through different screens to view data. The Fluke 985 is lightweight and easy to use in any position. And with easy data export options via USB cable or memory stick, data can be easily reviewed and analysed anywhere, anytime. Applications Measuring the effectiveness of filters Monitor industrial cleanrooms Pre-screen indoor air quality and collaborate with IAQ specialists Detect particle sources Report the effectiveness of repairs to customers Generate additional business by demonstrating the need for maintenance and repairs Key features Easier and more accurate air quality measurement. Six channels and particle size from 0.3 - 10.0 µm:Guarantees accurate measurements even in critical locations requiring ISO certification of class 5 ? 9 Ultra-light instrument with ergonomic design:Easy and effortless to operate with one hand in tight spaces or other awkward places Long battery life:Battery operating time of ten hours with standard use, for a full working day Large 3.5" QVGC colour display:Easy navigation and reading thanks to intuitive icons and options in large font Storage capacity of 10,000 records:Quick access to historical data On-screen data display:Users can choose between displaying the data in traditional tabular form or as a trend graph Personalised settings and configurations: Configurable display settings, sampling methods and alarm settings for particle counting Data export options:Download data to a PC using a USB memory stick, USB cable or Ethernet connection. No special software required to download or view data Optional password control: For security when required USB/Ethernet charging cable:Ensures the instrument is always ready for use when required ds: dsc: Scope of delivery Particle counter Getting Started manual User guide on CD Base station for charging and for convenient communication via USB and Ethernet Ethernet cable CAT5E, 2.13 m long Cable from USA-A to MINI-B, 1.82 m long Power supply: 12 V DC Zero-point inlet filter Filter adapter Protective cover for sample inlet Carrying case kts: particle counter in carrying case kpn: 985 kpn_dash: kpn_clear: 985 bkpn: FLUKE 985 bkpn_clear: FLUKE 985 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Particle counter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke particle counter sr_no_br_cl_ns: 4131397 sr_ns: FLUKE4131397
r: 02951450 p: 2432.289 pid: 71317 b: FLUKE q: 0 st: lt: 12 ean: 0095969814720 sr: FLUKE 4755659 sr_no_br: 4755659 sr_no_br_cl: 4755659 sr_cl: FLUKE4755659 sr_dash: sold: 7296.867 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 123B/EU industrial scopemeter 20MHZ - 4755659 cn: OSCILLOSCOPE cn2: OSCILLOSCOPE cn_clear: OSCILLOSCOPE d: Product description: Fluke 120B industrial ScopeMeter series handheld oscilloscopes Simpler testing, more insight and faster troubleshooting of electromechanical equipment The compact ScopeMeter Series 120B is the rugged oscilloscope solution for troubleshooting and maintenance of industrial electrical and electro-mechanical equipment. It is a truly integrated tester, with oscilloscope, multimeter and high-speed recorder in one easy-to-use instrument. The ScopeMeter Series 120B can also be integrated wirelessly with the Fluke Connect Mobile App and with the FlukeView software for ScopeMeter, to enable greater collaboration, data analysis and archiving of critical test data. Key features The 120B series of ScopeMeter industrial test tools offer innovative features designed to help technicians find faults faster and get the information they need to keep their systems operational. Display waveforms with Connect-and-View technology for triggering and setting, and automatically view related numeric readings with Fluke IntellaSet technology, all without making manual adjustments. Recorder Event Detect capabilities record and log hard-to-find intermittent events for easy viewing and analysis.[S][0] Digital two-channel oscilloscope and multimeter 40 MHz or 20 MHz oscilloscope bandwidth Two digital true-RMS multimeters with 5,000 counts Connect-and-View triggering for easy hands-free operation IntellaSet technology automatically and intelligently adjusts the numerical readout based on the measured signal Dual-channel recorder for waveform and measured values to establish a trend of data over long periods of time Recorder Event Detect records hard-to-find intermittent signals on repeating waveforms up to 4 kHz Shielded test leads for oscilloscope, resistance and continuity measurements Perform resistance measurements, call-through and diode tests and capacitance measurements Power measurements (W, VA, VAR, PF, DPF, Hz) Harmonics in voltage, current and power Check with BusHealth the physical layer of industrial networks against defined reference levels Store or recall instrument data and settings Save instrument settings defined by a test set for routine maintenance or as most commonly used test procedures. External optically isolated USB interface to send, archive and analyse scope or measurement data Optional WiFi adapter connectable to internal USB port to wirelessly send information to PC, laptop or Fluke Connect Mobile App* FlukeView ScopeMeter software for Windows Rugged design to withstand vibration of 3g and shock of 30g and with protection class IP51 according to EN/IEC60529 Industry's highest safety specification: meets safety specification for CAT IV 600 V Rechargeable Li-ion battery, seven hours of battery power (with a four-hour charge time) ds: dsc: Scope of delivery Fluke 123B handheld oscilloscope Shielded test leads with black earth wires Measure lead black (for grounding) Hook terminals (red, blue) Adapter from banana plug to BNC (black, 1x) Angled USB adapter WiFi USB adapter* Switching power supply, adapter/battery charger Rechargeable Li-ion battery pack kts: industrial scopemeter 20MHZ kpn: 123B/EU kpn_dash: kpn_clear: 123BEU bkpn: FLUKE 123B/EU bkpn_clear: FLUKE 123BEU c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Oscilloscope | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke oscilloscope sr_no_br_cl_ns: 4755659 sr_ns: FLUKE4755659
r: 02957567 p: 6881.327 pid: 72170 b: FLUKE q: 0 st: lt: 8 ean: 0095969772532 sr: FLUKE 4563577 sr_no_br: 4563577 sr_no_br_cl: 4563577 sr_cl: FLUKE4563577 sr_dash: sold: 6881.327 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1738/EUS portable three-phase power logger with current probes - 4563577 cn: ENERGY COST METER cn2: ENERGY COST METER cn_clear: ENERGYCOSTMETER d: Product description: Comprehensive surveys of power quality and energy. Gather the data you need to make real-time critical decisions The Fluke 1738 three-phase Advanced Power Logger is compatible with the Fluke Connect mobile app and desktop software, giving you the data you need to make immediate, critical, real-time decisions about power quality and energy consumption. Like the Fluke 1736 Power Logger, the 1738 Advanced Power Logger automatically measures and records more than 500 power quality parameters and allows you to investigate more advanced power quality issues. Perform advanced analysis with an enhanced power quality report (EN50160) that gives you a quick idea of the overall status of the electrical system. The power quality report is based on detailed power quality data with display of waveforms of events so you can see even better how to make the system more reliable and economical. Installation is easier than ever and reduces measurement uncertainty thanks to an optimised user interface, flexible current probes and an intelligent measurement monitoring function that allows you to reduce measurement errors by digitally checking and correcting common connection errors. View and share data remotely with your team via the Fluke Connect app or view your logger over your company's Wi-Fi network so you can maintain safer working distances and make critical decisions in real time, reducing the need for security equipment, site visits and check-ins. You can also quickly and easily display measurements in a summary or graph to identify problems, and you can create detailed reports with the included Fluke Energy Analyze Plus software package. Optionally, you can create IEEE519 reports to understand harmonic levels, voltage and current distortion and load current (licence required).... The Fluke 1738 is the ideal test tool for conducting energy studies and for advanced recording of mains power quality. Key features: Key measurement functions: Automatically measure and record voltage, current, power, harmonics and associated power quality values. Compatible with Fluke Connect: View data locally on the instrument, via the Fluke Connect mobile app and desktop software or via your building's Wi-Fi network. Convenient instrument connection: The instrument is powered directly from the measured circuit. Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III approved for service input and downstream circuits. Measures all three phases and neutral: With 4 flexible current clamps included. Comprehensive log function: More than 20 individual log sessions can be stored on the instruments. All measured values are even recorded automatically so you never lose measurement trends. They can even be accessed during recording sessions and before downloading for real-time analysis. Record decreases, increases and inrush currents: Includes snapshots of waveforms of events and a high-resolution RMS profile along with the date, time stamp and severity to identify possible root causes of mains power quality problems. Power quality summary: Summarises key parameters about power quality so you can quickly see the overall status of your electrical system and know if further analysis and reporting is required. Bright colour touchscreen: Useful analysis and checking of data can be done in the field, with full graphical display. Optimised user interface: Always capture the right data with fast, guided graphical setup and eliminate uncertainty about connections with the intelligent verification function. Full 'on-site' set-up via the front panel or the Fluke Connect App: No need to return to the workshop to download and install or to take a computer to the electrical distributor. Fully integrated registration: Connect other Fluke Connect devices to the Fluke 1738 to record two other measurement data simultaneously. You can choose from almost any measurement data on a Fluke Connect wireless digital multimeter.* Energy Analyze Plus application software: Download and analyse every detail of energy consumption and power quality using our automatic reports. ds: dsc: Scope of delivery 1738 energy logger Power supply Voltage test cables Crocodile clips (4x) 1500A flexible current clamp of 30.5 cm (4x) Carrying case Energy Analyze Plus software Magnetic suspension strap Magnetic voltage probes (4x) Wifi/BLE adapter Cables Colour coding kit Documentation on USB memory kts: portable three-phase power logger with current probes kpn: 1738/EUS kpn_dash: kpn_clear: 1738EUS bkpn: FLUKE 1738/EUS bkpn_clear: FLUKE 1738EUS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Energy cost meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke energy cost meter sr_no_br_cl_ns: 4563577 sr_ns: FLUKE4563577
r: 02860918 p: 1573.246 pid: 71703 b: FLUKE q: 0 st: lt: 10 ean: 0095969819930 sr: FLUKE 4777186 sr_no_br: 4777186 sr_no_br_cl: 4777186 sr_cl: FLUKE4777186 sr_dash: sold: 6292.984 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 787B process meter - 4777186 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Product description: The Fluke i40s-EL current clamp is used for measuring low current, is capable of taking measurements of up to 40 A and also accurately measures secondary current transformers of 1 A and 5 A. The jaws of the i40s-EL can be clamped around conductors up to 15 mm in diameter Key features Doubles troubleshooting capabilities by combining the power of a safety-specified digital multimeter and a mA loop calibrator in a single, compact measuring instrument. Based on the familiar measurement capabilities of the 87 DMM and adds the ability to measure, generate and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, providing you with the ideal instrument for investigating and calibrating current loop applications. Compatibility with the Fluke Connect mobile app and desktop software allows technicians to wirelessly monitor, log and share data with their team from location, anytime, anywhere. (Fluke module IR3000FC required - not included) ds: dsc: Scope of delivery TL71 premium test lead set AC72 alligator clips Four AA alkaline batteries (included) Quick reference guide kts: process meter kpn: 787B kpn_dash: kpn_clear: 787B bkpn: FLUKE 787B bkpn_clear: FLUKE 787B c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 4777186 sr_ns: FLUKE4777186
r: 02951106 p: 447.057 pid: 73247 b: FLUKE q: 0 st: lt: 5 ean: 0095969659192 sr: FLUKE 4296018 sr_no_br: 4296018 sr_no_br_cl: 4296018 sr_cl: FLUKE4296018 sr_dash: sold: 6258.798 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 116/62 MAX+ combination set for technicians - 4296018 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description: combination set for technicians The extra complete HVAC combination set for technicians provides the complete solution that allows more efficient detection and correction of problems with HVAC systems. The compact carrying case contains all the accessories needed by the HVAC specialist. Key features Fluke 116 digital multimeter. Designed by electricians.Manufactured by Fluke Fluke 116 HVAC multimeter with temperature and microampere measurement. TL175 hardpoint measuring lead set. TPak ToolPak magnetic meter suspension loop. Flexible sleeve pipe clamp with thermocouple. 80BK integrated temperature measurement probe. 80AK-A thermocouple adapter. C115 deluxe soft carrying case with shoulder strap. Key features Fluke 62 MAX+. Small in size.Big in ruggedness Dust and water resistant: meets IP54. Rugged: tested to withstand a 3-metre drop. Ergonomically designed: completely redesigned for even greater comfort in the hand. Distance to measurement point: 12:1. Dual laser: identifies the area to be measured. Large backlit display: makes data easier to read, even in dark environments. ds: dsc: Scope of delivery Fluke 116 HVAC multimeter with temperature and microampere measurement Fluke 62 MAX+ infrared thermometer kts: combination set for technicians kpn: 116/62 MAX+ kpn_dash: kpn_clear: 11662MAX bkpn: FLUKE 116/62 MAX+ bkpn_clear: FLUKE 11662MAX c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 4296018 sr_ns: FLUKE4296018
r: 02954085 p: 1001.876 pid: 72144 b: FLUKE q: 0 st: lt: 10 ean: 0095969249072 sr: FLUKE 2117440 sr_no_br: 2117440 sr_no_br_cl: 2117440 sr_cl: FLUKE2117440 sr_dash: sold: 6011.256 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery type 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 200 kHz Max. resistance 50 MOhm n: FLUKE 88-V/A automotive diagnostic kit with automotive multimeter - 2117440 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: A complete automotive diagnostic package with almost everything you need in an automotive multimeter The number of electrical systems in modern cars is steadily increasing. This increase is only getting stronger with the introduction of hybrid vehicles. As a result, the multimeter is perhaps the most important tool for fault detection and troubleshooting. The Fluke 88V has improved measurement and troubleshooting functions a greater accuracy for troubleshooting even more faults in both conventional vehicles and new hybrid vehicles. New features for optimal functionality A built-in thermometer makes it easy to take temperature measurements without having to carry a separate instrument. Conductivity measurement for measuring coils Magnetic hanging clip (included in kit) for easy attachment and reading while leaving your hands free for other tasks. "Peak min/max" for recording intermittent events with a duration starting at 250 microseconds With its large-digit display and bright backlight with two levels of illumination, the Fluke 88V is significantly easier to read than the old Fluke 88. Other features DC measurement with 0.1% accuracy 20,000 count mode (4-1/2 digit) with high resolution for accurate measurements Measures up to 1000 V AC and DC Current measurements of up to 10 A; 20 A for up to 30 seconds Built-in thermometer allows you to carry one less instrument (thermocouple included) Diode test for testing alternators Frequency up to 200 kHz and % duty cycle Resistance measurement and continuity test Speed measurements using an inductive sensor (included) Pulse width measurements per millisecond for fuel injectors Magnetic hang clip to attach the gauge to the vehicle, leaving your hands free for other tasks Min/Max-Average recording with Min/Max Alert for automatic recording of variations Peak Logging for recording transients with speeds up to 250 µs Relative mode for eliminating test lead resistance when measuring low resistance values Automatic and manual range setting for maximum flexibility AutoHold for recording stable measured values and preventing signals with noise Large display digits and bright white backlight with two illumination levels for improved legibility Analogue bargraph for recording changing or unstable signals Input Alert provides audible warning of input misuse Enhanced sleep mode consumes less power, extending battery life Battery door for quick battery replacement without having to open the housing 'Classic' design with new loose holster with integral storage compartment for measuring lead and probe The 10 mega-ohm input impedance does not stress circuits and is safe for computers Lifetime warranty Safety standards The Fluke 80 V has been independently tested and complies with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V/CAT III 1000V. The instruments can withstand impulses in excess of 8,000 V and reduce the risks posed by power surges and spikes. ds: dsc: Scope of delivery 88V Automotive Multimeter TL224 silicone measuring leads AC285 Long Reach crocodile clips TP220 measuring probes RPM 80 inductive RPM TPAK ToolPak magnetic suspension clip 80BK temperature measuring probe Two automotive backprobe pins Insulation-penetrating probe C800 durable carrying case Holster 9V battery (installed) Quick start guide CD with detailed operating instructions kts: automotive diagnostic kit with automotive multimeter kpn: 88-V/A kpn_dash: 88 kpn_clear: 88VA bkpn: FLUKE 88-V/A bkpn_clear: FLUKE 88VA c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 2117440 sr_ns: FLUKE2117440
r: 02909249 p: 2000.17 pid: 73189 b: FLUKE q: 0 st: lt: 6 ean: 0095969666138 sr: FLUKE 4321662 sr_no_br: 4321662 sr_no_br_cl: 4321662 sr_cl: FLUKE4321662 sr_dash: sold: 6000.51 p_range: none type: standard act: 1 avo: 1 av: Min. temperature -40 °C Max. temperature 800 °C Optical ratio 50:1 Power supply 2 x AA Accuracy ± 1 °C n: FLUKE 568 EX Infrared thermometer (intrinsically safe series) - 4321662 cn: TEMPERATURE GUN cn2: TEMPERATURE GUN cn_clear: TEMPERATUREGUN d: Product description: The Fluke 568 Ex intrinsically safe infrared thermometer is the only product you can use anywhere in the world in Class I Division 1 and Division 2 or Zone 1 and 2 hazardous environments. Whether you work in the petroleum, chemical, oil, gas or pharmaceutical industries, the 568 Ex allows you to take the most trusted brand of test and measurement instruments anywhere in the world in the most explosive environments. With its simple user interface and soft-key menus, the Fluke 568 Ex makes even complex measurements simple. With just a few key presses, you can quickly navigate and set emissivity, save data or turn alarms on and off. All this combined in one intrinsically safe instrument that has been certified by major assessment bodies around the world. Key features With its rugged, user-friendly, ergonomic design, the Fluke 568 can be used in demanding industrial, electrical and mechanical environments. Meets the certifications of safety institutes around the world for intrinsic safety for Class I Division 1 and Division 2 or Zone 1 and 2 hazardous environments. Measures -40 °C to 800 °C /-40 °F to 1472 °F Conductive carrying case to safely carry the infrared thermometer in hazardous environments Advanced functions are easily accessible with the soft keys and graphic display Measure small objects from a greater distance with a distance to measurement area ratio of 50:1 Suitable for K-thermocouple probe (KTC) with mini-connector With emissivity adjustment function with pre-installed material table, you can make measurements on a wide variety of surfaces with complete confidence Can record up to 99 data points Solve problems confidently with ± 1% measurement accuracy Versatile interface with a choice of five languages Two-year warranty ds: dsc: Scope of delivery Fluke 568 Ex intrinsically safe infrared thermometer K-type thermocouple probe Conductive IS hard carrying case User manual kts: Infrared thermometer (intrinsically safe series) kpn: 568 EX kpn_dash: kpn_clear: 568EX bkpn: FLUKE 568 EX bkpn_clear: FLUKE 568EX c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature gun | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke temperature gun sr_no_br_cl_ns: 4321662 sr_ns: FLUKE4321662
r: 03180588 p: 798.352 pid: 71494 b: FLUKE q: 0 st: lt: 12 ean: 0095969916653 sr: FLUKE 5111858 sr_no_br: 5111858 sr_no_br_cl: 5111858 sr_cl: FLUKE5111858 sr_dash: sold: 5588.464 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery type AA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test No Max. current AC/DC 2500 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. electrical capacity 1000 µF Max. frequency 0,5 kHz n: FLUKE 377 FC True-RMS wireless AC/DC current clamp with iFlex - 5111858 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Measure voltage and current with your current clamp Faster and safer testing, all without touching a live wire, with FieldSense technology. Complete 3-phase voltage and current testing in three easy steps Complete set calculating phase-to-ground and phase-to-phase values Displayed on your smartphone and stored in the cloud via Fluke Connect software Phase rotation calculated and displayed on Fluke Connect software No more handwritten notes or complicated arithmetic ds: dsc: Scope of delivery 377 FC True-RMS non-contact current clamp iFlex flexible current clamp (18 inches; 48 cm) TL224 test leads with silicone insulation TP175 TwistGuard test probes AC285 earth clamp (black, one piece) TPAK magnetic suspension kit, with 23 cm (9 inches) suspension strap Carrying case Quick guide kts: True-RMS wireless AC/DC current clamp with iFlex kpn: 377 FC kpn_dash: kpn_clear: 377FC bkpn: FLUKE 377 FC bkpn_clear: FLUKE 377FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5111858 sr_ns: FLUKE5111858
r: 02951925 p: 5528 pid: 72693 b: FLUKE q: 0 st: lt: 8 ean: 0095969413862 sr: FLUKE 3023328 sr_no_br: 3023328 sr_no_br_cl: 3023328 sr_cl: FLUKE3023328 sr_dash: sold: 5528 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 718EX 300G pressure calibrator (from -830 mbar to 20 bar) - 3023328 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 718 series of pressure calibrators (includes 4 models) offers a total pressure calibration solution for transmitters, meters and switches. This compact pressure calibration solution is about two-thirds smaller than comparable instruments and weighs only one kilogram. The unique, easy-to-clean pump is protected against damage and can be cleaned without disassembly, even in the field. Key features: Generates and measures pressure and milliamps for calibrating and maintaining almost all pressure equipment The integrated pump can be easily cleaned if it accidentally comes into contact with liquids, reducing operating and repair costs and enabling maintenance of the pump in the field Error rate calculation for faster pass/fail decisions in the field Highest mA accuracy of 0.015% for greater measurement reliability and wider range of tasks Min/Max/Hold for recording changing measured values Switch test function for faster and more accurate testing of pressure switches New pressure ranges of 1 and 300 psi mean fewer additional instruments needed Ranges of 1, 30, 100 and 300 psi now available ds: dsc: kts: pressure calibrator (from -830 mbar to 20 bar) kpn: 718EX 300G kpn_dash: kpn_clear: 718EX300G bkpn: FLUKE 718EX 300G bkpn_clear: FLUKE 718EX300G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 3023328 sr_ns: FLUKE3023328
r: 03312286 p: 415.123 pid: 158660 b: FLUKE q: 2 st: 1 lt: 1 ean: 0095969921138 sr: FLUKE 5134758 sr_no_br: 5134758 sr_no_br_cl: 5134758 sr_cl: FLUKE5134758 sr_dash: sold: 5396.599 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery type AA Low battery message Yes With current clamp Yes Max. current AC/DC 200 A Continuity test Yes Measurement Lo-Z No Measurement of noise No Measurement of electrical capacity No Max. frequency 0,066 kHz Measurement voltage Yes Current measurement Yes Measurement resistance No Measurement frequency Yes n: FLUKE T6-1000PRO/EU electrical tester - 5134758 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Voltage and current on one screen The T6-1000 PRO electrical tester measures voltage up to 1000 V AC and current up to 200 A AC, all through the open fork and without the test lead making contact with open voltage. Connect the black test lead to earth using the alligator clip provided for heavy duty use, slide the wire into the open fork and voltage and current are displayed simultaneously. For wires up to AWG 4/0 (120 mm2), with a load of up to 200 A and 1000 V AC. Even with gloves on. It will transform your work. Key features Simultaneous voltage and current display - save time by viewing voltage and current readings simultaneously when troubleshooting motors, pumps or other equipment. Visual Continuity - When checking the passage, the screen automatically turns green when the beeper is on. Ideal for when there is too much ambient noise to hear the beep, when you wear hearing protection or when it is too dark to read the screen easily. No more guesswork when checking passage, thanks to Visual Continuity. True-RMS - Accurate voltage and current measurements, even when measuring complicated signals. FieldSense technology for measuring AC voltage, current and frequency without making electrical contact with active voltage 1 to 1000 V AC or DC 0.1 to 200 A AC Resistance: 1 Ohm to 100 kOhm Frequency measurement: 45 Hz to 66 Hz via open fork Works with most wires up to AWG 4/0 (17.8 mm/0.7 inch jaw opening) HOLD button temporarily freezes the display for easy viewing Easy-to-read backlit display Compatible with the optional Fluke TPAK magnetic meter hanging clip for convenient operation Standard two-year warranty; extendable to 4 years by registering the product within 45 days of purchase ds: dsc: Scope of delivery T6-1000 PRO electrical tester Attached test leads with removable 4 mm test caps Black AC285 SureGrip crocodile clips H-T6 holster User documentation kts: electrical tester kpn: T6-1000PRO/EU kpn_dash: T6 kpn_clear: T61000PROEU bkpn: FLUKE T6-1000PRO/EU bkpn_clear: FLUKE T61000PROEU c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5134758 sr_ns: FLUKE5134758
r: 02953990 p: 467.442 pid: 71307 b: FLUKE q: 0 st: lt: 6 ean: 0095969798341 sr: FLUKE 4695814 sr_no_br: 4695814 sr_no_br_cl: 4695814 sr_cl: FLUKE4695814 sr_dash: sold: 5141.862 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature Yes Digital Yes Battery type AA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test No Max. current AC/DC 600 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency No Measurement resistance No Current measurement Yes Measurement voltage Yes Max. electrical capacity 1000 µF n: FLUKE 902 FC True-RMS wireless HVAC current clamp - 4695814 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The Fluke 902 FC True-RMS HVAC Current Clamp enables HVAC technicians to create reports and collaborate with colleagues in the workplace. A Fluke Connect-enabled meter, the Fluke 902 FC True-RMS HVAC current clamp increases the productivity of HVAC technicians in the field. The rugged meter with dual safety specification - CAT III, 600 /CAT IV, 300 V - performs the essential measurements on HVAC systems ? microampere for testing pilot light sensors, resistance up to 60 kilo-ohm, AC current, AC/DC voltage, capacitance and contact temperature ? so there is no need to carry several meters around. The small case is easy to hold and the jaw fits perfectly in tight work spaces. As part of Fluke Connect ? the industry's largest system of software and (over 40) wireless test and measurement instruments ? the 902 FC can send measurement results to a smartphone or tablet for later, detailed analysis. These measurement results can be uploaded to the cloud. Technicians can combine measurement data from multiple Fluke Connect measurement tools to create reports on site and share them by email, and then collaborate with colleagues in real-time using the ShareLive video call function or emails, increasing productivity on site. This current clamp reduces the need for technicians to wear personal protective equipment when working on electrical distributors with high voltage/current values. Simply switch off the electrical distributor, check through standard safety procedures that the distributor is de-energised, apply the clamp and synchronise the clamp to a smartphone using the Fluke Connect app, close the distributor, re-energise it and take measurements from a safe distance. Key features: 200 µA DC current measurements for measuring through flame sensors Extended resistance range for measuring through thermistors up to 60 k? Record flue gas temperature Measure starting and operating capacitors of motors Measure the performance of frequency-controlled drives Fluke Connect Fluke Connect connects your meter to your phone via Bluetooth, so you can do more faster and more safely Read read readings from a safe distance on your phone while wearing less personal protective equipment and your meter bears all the risk Find faults better by instantly recording trends live on your phone's screen and monitoring trends Compile and send reports, right from location. Is the report not enough? Fluke Connect has a ShareLive video call feature, which streams live video and measurements in the same screen Don't stop recording results, save them to your phone directly from your meter at the touch of a button Measurement functions 600 A AC current measurement 600 V AC and DC voltage measurement Temperature measurement from -10 °C to 400 °C (14 °F to 752 °F) 1000 µF capacitance measurement DC current measurement up to 200 µA True-RMS voltage and current for accurate measurement of non-linear signals Resistance measurement up to 60 k? Minimum and maximum values for automatic recording of fluctuations Further features Safety specification CAT III 600V, CAT IV 300V The TPAK magnetic suspension strap (optional) allows you to easily hang the meter while using the probes Ergonomic design allows the clamp to sit comfortably in the hand and be used when wearing personal protective equipment Large and easy-to-read backlit display Three-year warranty ds: dsc: Scope of delivery TL75 measuring leads (1 pair) 80BK integrated DMM thermocouple (1) AA alkaline batteries (2) Carrying case User manual kts: True-RMS wireless HVAC current clamp kpn: 902 FC kpn_dash: kpn_clear: 902FC bkpn: FLUKE 902 FC bkpn_clear: FLUKE 902FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4695814 sr_ns: FLUKE4695814
r: 02841297 p: 1019.74 pid: 73141 b: FLUKE q: 0 st: lt: 10 ean: 0095969586696 sr: FLUKE 3947812 sr_no_br: 3947812 sr_no_br_cl: 3947812 sr_cl: FLUKE3947812 sr_dash: sold: 5098.7 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery type AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z Yes Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 100000 µF Max. frequency 1000 kHz Max. resistance 500 MOhm n: FLUKE 289/FVF combination kit multimeter 289 + View Forms software - 3947812 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Compatible with Fluke Connect Mobile App Achieve maximum productivity with the combination kit of the Fluke 289 and FlukeView Forms software. The Fluke 289 with its built-in data logger and TrendCapture feature lets you detect hard-to-find, intermittent faults by monitoring certain equipment functions while performing other work in the meantime. With the FlukeView Forms software, you can overlay data from six different meters or time periods to demonstrate cause-and-effect relationships or for condition monitoring purposes. Turn your data into clear graphs and tables, for professional reporting or for analysing individual readings or series of readings. The 289 is compatible with the Fluke ir3000 FC infrared connector, so you can share live measurements on your iOS or Android device using the Fluke Connect Mobile App. The 289/FVF combination kit offers you a practical and affordable option of performing predictive maintenance. Key features: Compatible with Fluke Connect Mobile App and all Fluke FC-enabled measuring instruments with optional ir3000 FC infrared connector (sold separately). Instantly show your team what you see, with the ShareLive video call feature (Fluke Connect Mobile App and ir3000 FC wireless connector required). TrendCapture graphically displays a logged data session to quickly determine if anomalies have occurred. Zooming in on trends offers unprecedented possibilities for viewing and analysing TrendCapture data; up to 14 times zoom in. The selectable AC filter (smoothing mode) allows a more stable reading to be displayed when the input signal changes rapidly or contains a lot of noise. Adjustable recording thresholds and Auto Hold by defining a percentage change for measurements at the start of a new event. Large dot matrix display, 1/4 VGA, up to 50,000 counts and with white backlight. Log function with extended memory for independent monitoring of signals for a defined period of time. With the integrated TrendCapture function, you can view a graphical display of recorded measurement values without a PC. Store up to as many as 15,000 recorded events. Multiple log sessions can be saved before downloading to a PC. Two connections for 50-ohm range with 1 milliohm resolution and 10 mA source current. Useful for measuring the resistance of motor windings and comparing differences in them or for measuring contact resistance. Low-pass filter for accurate simultaneous voltage and frequency measurements in frequency-controlled drives and other devices that cause electrical disturbances. LoZ Volts. Low input impedance, prevents erroneous readings due to 'phantom voltage'. Also recommended for testing for presence or absence of (mains) voltage. Internal auxiliary screens for measurement functions. Uncertain about a function? Go to that function and press the 'i' key. Real-time clock for automatic timing of stored measurement values. Relative mode for eliminating test lead resistance when measuring low-resistance or capacitance values. True-RMS AC voltage and current for accurate measurements on non-linear signals. Measures up to 10 A (20 A for 30 seconds). Capacitance range 100 mF. Peak recording for recording transients at speeds up to 250 ?s. Premium measuring leads and crocodile clips included. Banana plugs included. Optional magnetic hanging clip for easy attachment and reading while leaving your hands free for other tasks. FlukeView Forms software lets you document, store and analyse individual readings or a series of readings, then turn them into professional-looking documents. Limited lifetime warranty ds: dsc: Scope of delivery Fluke 289 multimeter FlukeView Forms software with cable AC175 alligator clips 80BK-A thermocouple probe TL71 silicone test lead kit TPAK magnetic suspension kit C280 carrying case Set of banana plugs Information pack kts: combination kit multimeter 289 + View Forms software kpn: 289/FVF kpn_dash: kpn_clear: 289FVF bkpn: FLUKE 289/FVF bkpn_clear: FLUKE 289FVF c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3947812 sr_ns: FLUKE3947812
r: 08106982 p: 2440.854 pid: 72118 b: FLUKE q: 0 st: lt: 8 ean: 0195112044575 sr: FLUKE 5353866 sr_no_br: 5353866 sr_no_br_cl: 5353866 sr_cl: FLUKE5353866 sr_dash: sold: 4881.708 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 2062 Advanced Pro cable locator set - 5353866 cn: CABLE LOCATOR cn2: CABLE LOCATOR cn_clear: CABLELOCATOR d: Product description Quickly and accurately locate live and de-energised wires and cables in walls, ceilings and floors Patented Smart Sensor locates and displays live cables on colour display Locate breaks, interruptions and short circuits and easily find circuit breakers and fuses Safety specification CAT IV 600 V Includes i400 AC Current Clamp for creating a trace signal on the cable when you cannot access exposed conductors Designed for your safety The Fluke 2062 Advanced Pro Cable Locator accurately and safely troubleshoots live and de-energised cables in residential, commercial and industrial environments up to CAT IV 600 V. This CAT rating offers the highest protection available on a cable locator. It is designed to protect you from the most dangerous levels of commutation collapse, peaks up to 8,000 V, that can occur in industrial environments. This is especially important for scenarios you may encounter in environments such as industrial plants, factories and hospitals where critical equipment cannot be taken out of service. Smarter tracking saves time With the patented Smart Sensor, only available on the Fluke 2062, you can trace cables faster and easier. It locates and displays live cables in walls, floors and ceilings on a high-resolution 3.5-inch TFT LCD colour display. Integrated on-screen help screens provide extra ease of use, whether you are a beginner or an expert. The point sensor provides an audible tone when locating wires, and the Smart Sensor helps visualise and locate the direction of live cables. Cable tracing adapted to your needs Whether detecting faults in electrical wiring and equipment in homes, commercial buildings or high-voltage facilities, the Fluke 2062 can easily detect breaks, interruptions and short circuits. Its various modes and functions give you the flexibility to detect a wide range of electrical wiring and circuit problems you may encounter on the job. Receiver with four tracing modes The 2062-R receiver detects signal in wires and cables according to two modes: passive tracing without the transmitter for non-contact voltage detection, and active tracing with the transmitter for all other modes. The receiver's point sensor can trace wires in corners, tight spaces and junction boxes. 'Smart Sensor' mode for detection and visualisation of live cables on the large colour LCD screen 'Tip sensor' mode for more accurate detection of a cable 'Circuit breaker' mode for easy identification of circuit breakers and fuses based on the highest recorded signal detected by the transmitter 'Non-contact voltage detection' mode to trace live wires without using the transmitter Three transmitteri power modes The 2000-T transmitter operates on live and de-energised circuits up to CAT IV 600 V and has high, low and loop modes. These modes change the strength of the signal generated and, depending on the circuit you are detecting, can provide more accurate results. 'High' mode for normal live and de-energised circuits 'Low' mode for accurate searching with a low signal to reduce coupling with nearby wires and metal objects 'Loop' mode for de-energised closed circuits Two transmitter output frequencies The 2000-T automatically detects whether the system is live or de-energised and selects an output frequency of 6 kHz or 33 kHz. Eight receiver sensitivity levels More sensitivity levels mean more flexibility and tracking accuracy. Complete kit The Fluke 2062 advanced Pro cable locator set comes with everything needed to trace cables and circuits. The accessory set includes test leads, test probes, adapters for wall sockets with round and flat pins and alligator clips to connect the transmitter to electrical systems. Connecting the transmitter to a bare conductor with the crocodile clips and test leads provided always gives the most accurate results. However, in situations where a direct connection to a bare conductor is not available, the supplied i400 current clamp can be used with the 'Loop' mode to generate an amplified 6 kHz signal through the insulation. The kit also includes a tape with magnetic hanging clip, batteries and a hard carrying case. ds: dsc: Scope of delivery Fluke 2062R advanced Pro cable locator receiver with Smart Sensor Fluke 2000T advanced cable locator transmitter i400 AC current clamp Fluke 2000ACC test lead accessory kit for 2052/2062 Handy strap with magnetic hanging clip Premium hard carrying case Batteries Quick guide kts: Advanced Pro cable locator set kpn: 2062 kpn_dash: kpn_clear: 2062 bkpn: FLUKE 2062 bkpn_clear: FLUKE 2062 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Cable locator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke cable locator sr_no_br_cl_ns: 5353866 sr_ns: FLUKE5353866
r: 02958452 p: 1171.628 pid: 72248 b: FLUKE q: 0 st: lt: 6 ean: 0095969062565 sr: FLUKE 665091 sr_no_br: 665091 sr_no_br_cl: 665091 sr_cl: FLUKE665091 sr_dash: sold: 4686.512 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 705 loop calibrator - 665091 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Key features: Powerful loop calibrator offering a highly cost-effective, integrated solution for calibration, repair and maintenance of milliamp loops. Provides simultaneous mA and % readout for fast, easy interpretation of readings. Delivers mA accuracy of 0.02%. Features push button with 25% steps for quick, easy linearity checks Other features: mA sourcing, simulation and measurement 0.02% accuracy and 0.001 mA resolution Simultaneous display of mA and % Selectable step or ramp outputs 24 V loop power supply with mA measurement 0-28 VDC measurement to monitor loop voltage Easy battery replacement without opening the housing Includes "span check" for quick confirmation of zero and span. Provides selectable slow ramp, fast ramp and step to provide smooth outputs for valve rotation and loop functional testing. Includes a 24-volt internal loop power supply, allowing you to power and read a transmitter simultaneously without a digital multimeter. Operates on a single 9 V battery that can be easily replaced without breaking the calibration seal. Offers 0 - 20 mA or 4 - 20 mA standard start-up modes. Comes with a protective yellow holster with storage for test leads and a three-year warranty. ds: dsc: Scope of delivery Fluke 705 Loop calibrator AC70A alligator clips C10 protective yellow holster with Flex-Stand Instruction sheet TL75 test lead kit designed to safety standards NIST traceable calibration report and data kts: loop calibrator kpn: 705 kpn_dash: kpn_clear: 705 bkpn: FLUKE 705 bkpn_clear: FLUKE 705 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 665091 sr_ns: FLUKE665091
