r: 02953740 p: 3518.966 pid: 71282 b: FLUKE q: 0 st: lt: 10 ean: 0095969666862 sr: FLUKE 4325170 sr_no_br: 4325170 sr_no_br_cl: 4325170 sr_cl: FLUKE4325170 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1623-2 KIT GEO earth diffusion resistance kit (incl. earth stake/cable, current clamp) - 4325170 cn: EARTH TESTER cn2: EARTH TESTER cn_clear: EARTHTESTER d: Product description: The Fluke 1623-2 GEO ground tester offers the ability to store and download data via the USB port. Top-class accessories ensure easy and fast measurement procedures. 3- and 4-pole potential loss and earth resistance measurements 4-pole ground resistance measurement Selective earth pin measurement with 1 current clamp Selective earth pin measurement with 2 current clamps IP56 classified for outdoor use Sturdy carrying case Data storage and transfer via USB The tester is also easy to use. For each measurement, the tester indicates which electrodes or current clamps should be connected. The large rotary switch can be used even when wearing gloves. Key features Electrode-less measurement The Fluke 1623-2 earth ground tester can measure loop resistances in grounding systems using only current clamps. In this testing method, two current clamps are placed around the earth pin and each current clamp is connected to the tester. No earth electrodes are used. One current clamp induces a known, fixed voltage and the current is then measured by the other current clamp. The tester then automatically determines the resistance of the earth pin. This measurement method only works if a connected earthing system is present for the building or structure being tested, but this is usually the case. If there is only one earth connection, as is the case in many homes, the electrodeless method does not provide an acceptable value and the potential loss test method should be used. An electrodeless measurement does not require the earthing pin to be disconnected. As a result, the connected earthing system remains intact during measurement. The time-consuming placing and connecting of electrodes for each earth pin on the system is a thing of the past; a significant time saver. You can also perform earthing tests in places that were previously out of the question, namely inside buildings, in high-voltage pylons and anywhere you do not have access to the ground. The most complete tester The Fluke 1623-2 is a unique earth ground tester that can take earth ground measurements in all four ways. 3- and 4-pole potential loss measurement (using electrodes) 4-pole ground resistance test (using electrodes) Selective test (using 1 current clamp and electrodes) Electrode-less test (using only 2 current clamps) ds: dsc: Scope of delivery GEO earthing tester User manual Batteries Quick guide USB cable 2 current clamps C1620 professional carrying case 4 earth electrodes 3 wire reels kts: GEO earth diffusion resistance kit (incl. earth stake/cable, current clamp) kpn: 1623-2 KIT kpn_dash: 1623 kpn_clear: 16232KIT bkpn: FLUKE 1623-2 KIT bkpn_clear: FLUKE 16232KIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Earth tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke earth tester sr_no_br_cl_ns: 4325170 sr_ns: FLUKE4325170
r: 02951993 p: 3502.709 pid: 72710 b: FLUKE q: 0 st: lt: 8 ean: 0095969674072 sr: FLUKE 4353499 sr_no_br: 4353499 sr_no_br_cl: 4353499 sr_cl: FLUKE4353499 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-3650 pressure calibrator with two sensors, 2.48 bar, 345 bar - 4353499 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 36 PSIG, 5000 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 2.48 bar, 345 bar kpn: 721-3650 kpn_dash: 721 kpn_clear: 7213650 bkpn: FLUKE 721-3650 bkpn_clear: FLUKE 7213650 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353499 sr_ns: FLUKE4353499
r: 03327873 p: 3416.593 pid: 166128 b: FLUKE q: 0 st: lt: 10 ean: 0195112125113 sr: FLUKE 5602648 sr_no_br: 5602648 sr_no_br_cl: 5602648 sr_cl: FLUKE5602648 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FEV350/KIT SCH EV charging station analyser for type 1 and 2 connectors + 1664 multimeter in bag - 5602648 cn: TEST DEVICE cn2: TEST DEVICE cn_clear: TESTDEVICE d: Product description Complete solution for safety and performance testing of AC EV charging stations with type 2 or type 1 connectors Designed for technicians who need to perform and document multiple tests quickly and efficiently without carrying multiple tools Available measurements: PE (safety) ground test beforehand to ensure that no hazardous voltage is present, visual inspection, 30 mA ground fault switch + 6 mA RDC-DD trip test, rated voltage + phase sequence, automatic control pilot (CP) with waveform analysis, proximity pilot, and fault testing. Supported measurements: earth connection, insulation and loop/grid impedance with Fluke's compatible multifunction installation testers for installation certification/inspections via Bluetooth wireless connection. Wiring configuration diagrams and info screens for seamless integration with TruTest software for report generation. Includes TruTest EV charging software module for documentation and reporting. Provides predefined test plans and successful/failed indications for measurement results to simplify analysis and time spent on testing. ds: dsc: Scope of delivery FEV350/BASIC Test Analyzer FEV300-CON-TY1 Type 1 plug FEV300-CON-TY2 Type 2 plug Zero adjustment adapter/TY1 Zero adjustment adapter/TY2 TPAK Magnetic suspension clip Carrying case 1664 FC Multifunctional tester kts: EV charging station analyser for type 1 and 2 connectors + 1664 multimeter in bag kpn: FEV350/KIT SCH kpn_dash: kpn_clear: FEV350KITSCH bkpn: FLUKE FEV350/KIT SCH bkpn_clear: FLUKE FEV350KITSCH c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Test device | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke test device sr_no_br_cl_ns: 5602648 sr_ns: FLUKE5602648
r: 08107071 p: 3366.9 pid: 73494 b: FLUKE q: 0 st: lt: 8 ean: 0095969872959 sr: FLUKE 4991049 sr_no_br: 4991049 sr_no_br_cl: 4991049 sr_cl: FLUKE4991049 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 710 mA loop calibrator for valve testing with HART - 4991049 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Product description Key valve test functions include pre-configured valve signature test, speed test, step test, manual test and bump/partial stroke test Key mA loop calibration functions include mA generate, mA simulate, mA read, mA read/loop power and voltage read. The ValveTrack software allows data to be uploaded to a PC for further analysis of valve measurements logged and recorded in the 710's memory Testing valves easier than ever The Fluke 710 loop calibrator for valve testing is designed for quick and easy testing of control valves with HART technology. The 710's integrated test procedures and intuitive user interface allow users to test valves quickly and easily. In addition, the quick test results provide a clear diagnosis for quick maintenance decisions. Based on the results of the quick valve test, you know whether your valve is in good, marginal or poor condition, so you can quickly decide whether additional maintenance is required. Valve testing and HART communication with a precision loop calibrator The integrated HART communication function of the 710 loop calibrator for valve testing allows users to generate a 4-20 mA signal that controls the smart control valve. At the same time, the HART feedback signal is interpreted to determine whether the valve moves to the expected position. In addition to valve position information, the HART communication protocol can be used to determine the pressure delivered by the valve that moves the valve. The 710 provides integrated test procedures that automatically increase and change the mA signal while monitoring HART feedback on the valve position and pressure. This gives you a better picture of the valve's condition at the simple touch of a button. Preconfigured valve tests, concise answers Valve testing functions integrated into the 710 include Manual testing; manual modification of the mA signal and information on the HART position and pressure variable Increase of the mA signal over the full range from 4 to 20 to 4 mA during registration of the 0-100-0% position or of the pressures that move the valve from 0-100-0% Step change of the mA signal at the input of the valve and evaluation of the response of the valve to changes in the mA input signal Velocity tests to determine how fast the valve can be opened and closed Impact and partial stroke tests that help test valves over part of their range so they can be tested during an actual process ValveTrack software allows further analysis and trends to be created Valve tests logged and stored in the 710's memory can be uploaded using the ValveTrack analysis software.The ValveTrack software provides you with the following capabilities Uploading, printing and plotting of logged on-site valve tests performed Comparison of previously uploaded tests with recent tests Display of valve test history via HART label ID Export valve test data to CSV for further analysis in Microsoft Excel Save time, get answers On-site logging of HART data. After logging by the 710 on-site, the ValveTrack software can upload the HART configuration of up to 20 HART devices in your installation and output data in .csv or in .txt format. Logged mA loop measurements and HART data from a given transmitter can be logged for the purpose of troubleshooting and fine-tuning the loop. The data logging function has a selectable recording interval from 1 to 60 seconds and a logging capacity of 4910 records or 99 individual sessions. Each record contains the mA measurement and all four process variables. Main product features Test procedures rated Good, Marginal or Poor for control valves Generic HART communication Highest-in-class accuracy of 0.01% of measurement or source value Compact rugged design Intuitive user interface with 'Quick-Set' button for quick set-up and user-friendliness 24 V DC loop power supply with mA measurement mode (-25% to 125%) Resolution of 1 µA in mA ranges and 1 mV in voltage ranges Built-in selectable 250Ohm resistor for HART communication Simple two-wire connection for all measurements Automatic shutdown for longer battery life Variable step and rise time in seconds. HART communication The Fluke 710 has a built-in HART modem for communication that supports the following HART commands Read PV (primary variable) information from sensor Read information about PV output Read out and write PV unit type, tag ID name, descriptor and message Read out and write ranges for the primary variables (upper and lower range values) Activating or deactivating fixed current mode Setting zero point shift Setting zero point DAC (mA output 4 mA) Set gain DAC (mA output 20 mA) HART commands for valves The 710 provides the following unique HART commands for control valves: Automatic adjustment of the valve controller ds: dsc: Scope of delivery Set of stackable measuring leads Set of alligator clips with extra long teeth TP220 measuring probes AC280 SureGrip hook terminals Lemo to USB upload/download cable ValveTrack software (free download) Carrying case Six AAA batteries (installed) 709/709H/710 user manual on CD-ROM 709/709H/710 Quick Start Guide 709/709H/710 Safety information kts: mA loop calibrator for valve testing with HART kpn: 710 kpn_dash: kpn_clear: 710 bkpn: FLUKE 710 bkpn_clear: FLUKE 710 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 4991049 sr_ns: FLUKE4991049
r: 02957551 p: 3366.285 pid: 72871 b: FLUKE q: 0 st: lt: 8 ean: 0095969801966 sr: FLUKE 4706566 sr_no_br: 4706566 sr_no_br_cl: 4706566 sr_cl: FLUKE4706566 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1732/B three-phase energy logger (excl. current clamps) - 4706566 cn: ENERGY COST METER cn2: ENERGY COST METER cn_clear: ENERGYCOSTMETER d: Product description: The new Fluke 1732 and 1734 three-phase electrical Energy Loggers introduce a new easy way to find the sources of energy waste. Discover where and when energy is consumed within your installation, from the service input to individual circuits. Remotely view and share data with your team via the Fluke Connect app, allowing you to maintain safer working distances and make important decisions in real-time. This reduces the need for protective equipment, site visits and checks. Profiling energy consumption within your plant helps you identify energy saving opportunities and provides you with the data needed to take action. With the new Energy Analyze software package, you can compare multiple data points over a long period of time to get a complete picture of energy consumption. The first step towards reducing energy bills. Key features: Key measurement functions: Automatically measure and record voltage, current, power, power factor, energy and associated values Compatible with Fluke Connect: View data locally on the instrument, via the Fluke Connect mobile app and desktop software or via your building's Wi-Fi network Convenient instrument connection: The instrument is powered directly from the measured circuit Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III approved for service input and downstream circuits Measures all three phases: 3 flexible current clamps included Comprehensive log function: more than 20 individual log sessions can be stored on the instruments. All measured values are even recorded automatically so you never lose measurement trends. They can even be accessed during recording sessions and before downloading for real-time analysis Optimised user interface: quick, graphical settings for which additional information is available allow you to capture the right data every time, and the intelligent monitoring function ensures that the right connections have been made, reducing user uncertainty Bright colour touch screen: Useful analysis and checking of data can be done in the field, with full graphic display Optimised user interface: Always capture the right data with fast, guided graphical installation, and eliminate uncertainty about connections with the intelligent monitoring function Full on-site installation via front panel or Fluke Connect: No need to return to the workshop to download and install or to take a computer to the electrical distributor Fully integrated logging function: Connect other Fluke Connect tools to the Fluke 1734 to log two other measurement parameters at the same time. Choose from almost any parameter on a wireless digital multimeter or module with Fluke Connect* Application software Energy Analyze Plus: Download and analyse every detail of energy consumption using our automatic reports ds: dsc: Scope of delivery 1732 energy logger Power supply Voltage test cables Alligator clips (4x) Carrying case Energy Analyze Plus software Cables Colour coding set Documentation on USB memory kts: three-phase energy logger (excl. current clamps) kpn: 1732/B kpn_dash: kpn_clear: 1732B bkpn: FLUKE 1732/B bkpn_clear: FLUKE 1732B c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Energy cost meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke energy cost meter sr_no_br_cl_ns: 4706566 sr_ns: FLUKE4706566
r: 02951458 p: 3325.842 pid: 72623 b: FLUKE q: 0 st: lt: 10 ean: 0095969815048 sr: FLUKE 4755975 sr_no_br: 4755975 sr_no_br_cl: 4755975 sr_cl: FLUKE4755975 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 124B/EU/S industrial scopemeter 40MHZ (incl. SCC kit) - 4755975 cn: OSCILLOSCOPE cn2: OSCILLOSCOPE cn_clear: OSCILLOSCOPE d: Product description: Fluke 120B industrial ScopeMeter series handheld oscilloscopes Simpler testing, more insight and faster troubleshooting of electromechanical equipment The compact ScopeMeter Series 120B is the rugged oscilloscope solution for troubleshooting and maintenance of industrial electrical and electro-mechanical equipment. It is a truly integrated tester, with oscilloscope, multimeter and high-speed recorder in one easy-to-use instrument. The ScopeMeter Series 120B can also be integrated wirelessly with the Fluke Connect Mobile App and with the FlukeView software for ScopeMeter, to enable greater collaboration, data analysis and archiving of critical test data. Key features The 120B series of ScopeMeter industrial test tools offer innovative features designed to help technicians find faults faster and get the information they need to keep their systems operational. Display waveforms with Connect-and-View technology for triggering and setting, and automatically view related numeric readings with Fluke IntellaSet technology, all without making manual adjustments. Recorder Event Detect capabilities record and log hard-to-find intermittent events for easy viewing and analysis.[S][0] Digital two-channel oscilloscope and multimeter 40 MHz or 20 MHz oscilloscope bandwidth Two digital true-RMS multimeters with 5,000 counts Connect-and-View triggering for easy hands-free operation IntellaSet technology automatically and intelligently adjusts the numerical readout based on the measured signal Dual-channel recorder for waveform and measured values to establish a trend of data over long periods of time Recorder Event Detect records hard-to-find intermittent signals on repeating waveforms up to 4 kHz Shielded test leads for oscilloscope, resistance and continuity measurements Perform resistance measurements, call-through and diode tests and capacitance measurements Power measurements (W, VA, VAR, PF, DPF, Hz) Harmonics in voltage, current and power Check with BusHealth the physical layer of industrial networks against defined reference levels Store or recall instrument data and settings Save instrument settings defined by a test set for routine maintenance or as most commonly used test procedures. External optically isolated USB interface to send, archive and analyse scope or measurement data Optional WiFi adapter connectable to internal USB port to wirelessly send information to PC, laptop or Fluke Connect Mobile App* FlukeView ScopeMeter software for Windows Rugged design to withstand vibration of 3g and shock of 30g and with protection class IP51 according to EN/IEC60529 Industry's highest safety specification: meets safety specification for CAT IV 600 V Rechargeable Li-ion battery, seven hours of battery power (with a four-hour charge time) ds: dsc: Scope of delivery Fluke 124B handheld oscilloscope Shielded test leads with black earth leads Measure lead black (for grounding) Hook terminals (red, blue) Adapter from banana plug to BNC (black, 2x) 10:1 voltage measuring probe Angled USB adapter WiFi USB adapter* Switching power supply, adapter/battery charger Rechargeable Li-ion battery pack Carrying case Magnetic hanging clip FlukeView ScopeMeter software for Windows Screen saver kts: industrial scopemeter 40MHZ (incl. SCC kit) kpn: 124B/EU/S kpn_dash: kpn_clear: 124BEUS bkpn: FLUKE 124B/EU/S bkpn_clear: FLUKE 124BEUS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Oscilloscope | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke oscilloscope sr_no_br_cl_ns: 4755975 sr_ns: FLUKE4755975
r: 03329985 p: 3208.677 pid: 158662 b: FLUKE q: 0 st: lt: 8 ean: 0195112127940 sr: FLUKE 6008183 sr_no_br: 6008183 sr_no_br_cl: 6008183 sr_cl: FLUKE6008183 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE SMFT-1000/LITE multifunction solar energy tester in case - 6008183 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description Guarantees compliance with IEC 62446-1, category 1 standards Fast, automatic and accurate safety checks during solar panel installation Measures solar panel output in less than 45 seconds User-friendly interface Streamlined reporting with TruTest Solar Data Management software Improve your safety standards The Fluke SMFT-1000/LITE Set multifunction solar tester is designed to meet the requirements of solar installers looking for a professional tool that can ensure safety and compliance with IEC 62446-1, Category 1 solar installation standards. With a safety specification of CAT III 1000 V (IEC 61010-2) and a clear overvoltage warning, this solar kit keeps you and your colleagues safe on the job site. Fast, automatic and accurate mandatory safety verification With the "Keep the Leads" system and automatic testing function, the SMFT-1000 can test quickly and accurately, saving time and money when installing solar panels while ensuring safety and complying with standard IEC 62446-1 category 1. PV system performance testing Measure the power output of a solar panel in less than 45 seconds to create an I-V curve representing the maximum output power. Analyse the curve to identify performance issues and perform functional tests. With the SMFT-1000, you can compare on-site I-V curve results with the manufacturer's specifications to ensure the panel is operating efficiently. In addition, the Fluke TruTest Solar Database app is available for use with the SMFT-1000 and features specifications of more than 120,000 different types of PV panels that can be loaded into the SMFT-1000 (available in the Google Play Store). Intuitive user interface The high-definition colour screen and colour-coded inputs and test leads allow users of the SMFT-1000 to test with confidence and safety. The analyser also has a visual inspection function, allowing easy compliance with PV system IEC regulations. Comprehensive reporting The TruTest Solar Data Management software simplifies solar testing and reporting. Manage data, perform I-V curve analysis and create compliant reports quickly and easily. ds: dsc: Scope of delivery Carrying case SMFT-1000 multifunction PV analyser Carrying strap TL1000 test lead kit TL1000-MC4 test lead kit kts: multifunction solar energy tester in case kpn: SMFT-1000/LITE kpn_dash: SMFT kpn_clear: SMFT1000LITE bkpn: FLUKE SMFT-1000/LITE bkpn_clear: FLUKE SMFT1000LITE c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 6008183 sr_ns: FLUKE6008183
r: 03343213 p: 3180.978 pid: 166132 b: FLUKE q: 0 st: lt: 10 ean: 0195112119631 sr: FLUKE 5581087 sr_no_br: 5581087 sr_no_br_cl: 5581087 sr_cl: FLUKE5581087 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1674 FC SCH FTT multifunctional installation tester with TruTest software bundle in case - 5581087 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Simple bidirectional user interface eliminates complex multi-level menus Easy installation with the colour touch screen, smart device or a PC Fast and accurate testing with automatic test and automatic measurement validation Fluke Connect compatibility eliminates the need for data entry View results and generate certificates on-site with Fluke TruTest- software The Fluke 1674 FC multifunction installation tester with the TruTest software bundle will revolutionise the way you work. The 1674 FC has all the features of the 1673 FC and also features insulation pre-testing, programmable automatic testing, surge protector testing and insulation monitoring device testing. With its ergonomic design, seamless user interface, integrated data management capabilities, wireless connectivity and comprehensive reporting software, the 1674 FC sets the new standard as an integrated installation testing solution. With the 1670-series installation testers, you can check the safety of electrical installations in residential, commercial and industrial applications and comply with IEC 60364 requirements and all relevant local standards of IEC 61557. Perform your required tests up to 30% faster and reduce the time spent on documentation by up to 50%, all with full confidence in the data you collect. Fluke 1670-series multifunction installation testers streamline your installation and test preparations with the help of the intuitive user interface and high-resolution colour touchscreen. You can enter site information and set test routes directly from the tester, your mobile device or from a PC, and as you test you can edit this information directly on the instrument, ensuring accurate data. ds: dsc: Scope of delivery Multifunctional installation tester Heavy-duty power cord with single input connector Carrying case USB-C power adapter for charging TP165X probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Alligator clips Li-Ion battery Fluke TruTest software kts: multifunctional installation tester with TruTest software bundle in case kpn: 1674 FC SCH FTT kpn_dash: kpn_clear: 1674FCSCHFTT bkpn: FLUKE 1674 FC SCH FTT bkpn_clear: FLUKE 1674FCSCHFTT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 5581087 sr_ns: FLUKE5581087
r: 02951987 p: 3167.461 pid: 72080 b: FLUKE q: 0 st: lt: 8 ean: 0095969673914 sr: FLUKE 4353330 sr_no_br: 4353330 sr_no_br_cl: 4353330 sr_cl: FLUKE4353330 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-3605 pressure calibrator with two sensors, 2.48 bar, 34 bar - 4353330 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 36 PSIG, 500 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 2.48 bar, 34 bar kpn: 721-3605 kpn_dash: 721 kpn_clear: 7213605 bkpn: FLUKE 721-3605 bkpn_clear: FLUKE 7213605 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353330 sr_ns: FLUKE4353330
r: 03343202 p: 3086.598 pid: 159481 b: FLUKE q: 0 st: lt: 10 ean: 0195112119440 sr: FLUKE 5580841 sr_no_br: 5580841 sr_no_br_cl: 5580841 sr_cl: FLUKE5580841 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1674 FC SCH multifunctional installation tester in case - 5580841 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description The Fluke 1674 FC multifunction installation tester will revolutionise the way you work. The 1674 FC has all the features of the 1673 FC and also features insulation pre-testing, programmable automatic testing, surge arrestor testing and insulation monitoring device testing. With its ergonomic design, seamless user interface, integrated data management capabilities, wireless connectivity and comprehensive reporting software, the 1674 FC sets the new standard as an integrated installation testing solution. With the 1670-series installation testers, you can check the safety of electrical installations in residential, commercial and industrial applications and comply with IEC 60364 requirements and all relevant local standards of IEC 61557. Perform your required tests up to 30% faster and reduce the time spent on documentation by up to 50%, all with full confidence in the data you collect. Fluke 1670-series multifunction installation testers streamline your installation and test preparations with the help of the intuitive user interface and high-resolution colour touchscreen. You can enter site information and set test routes directly from the tester, your mobile device or from a PC, and as you test you can edit this information directly on the instrument, ensuring accurate data. ds: dsc: Scope of delivery Multifunctional installation tester Heavy-duty power cord with single input connector Carrying case USB-C power adapter for charging Probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Alligator clips Li-Ion battery kts: multifunctional installation tester in case kpn: 1674 FC SCH kpn_dash: kpn_clear: 1674FCSCH bkpn: FLUKE 1674 FC SCH bkpn_clear: FLUKE 1674FCSCH c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 5580841 sr_ns: FLUKE5580841
r: 08106997 p: 2982.041 pid: 71791 b: FLUKE q: 0 st: lt: 8 ean: 0095969946254 sr: FLUKE 5159990 sr_no_br: 5159990 sr_no_br_cl: 5159990 sr_cl: FLUKE5159990 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TIS55+ 9HZ thermal imaging camera 9HZ - 5159990 cn: THERMAL IMAGING CAMERA cn2: THERMAL IMAGING CAMERA cn_clear: THERMALIMAGINGCAMERA d: Product description 256 x 192 infrared resolution Asset tagging IR Fusion touch screen Manual and fixed focus Measures up to 550 °C Designed to withstand a 2-metre drop Robust. Reliable. Accurate. At Fluke, we know that accidents happen - instruments are dropped, kicked, stepped on or knocked over. There should be no need to replace an instrument because it falls off the workbench or gets splashed with water or dirt. That is why we designed the TiS55+ thermal imaging camera to withstand a 2-metre drop and be water/dust resistant (IP54). You need to be sure your camera will start every time. Get rid of the clipboard When you have to do so many checks every day, you sometimes forget what you saw and where it was. You may be walking around with a clipboard to take notes. The TiS55+ has a built-in assistant, which means you can finally ditch the clipboard and have all the important information in the images you take. Recorded text record up to 60 seconds of text per thermal image identify exactly what you see in real-time IR-PhotoNotes take pictures of asset numbers and other identifiers use as a reference when viewing thermal images on your computer Asset tagging sort your thermal images by asset simply scan the QR code on your asset, then capture the thermal images Connect the camera to your computer to display the images sorted by asset ds: dsc: Scope of delivery Thermal imaging camera AC power supply (including universal AC adapters) One robust lithium-ion smart battery USB cable 4 GB micro SD card Sturdy hard carrying case with soft transport bag and adjustable hand strap Free download available: Fluke Connect software and user manual kts: thermal imaging camera 9HZ kpn: TIS55+ 9HZ kpn_dash: kpn_clear: TIS559HZ bkpn: FLUKE TIS55+ 9HZ bkpn_clear: FLUKE TIS559HZ c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Thermal imaging camera | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke thermal imaging camera sr_no_br_cl_ns: 5159990 sr_ns: FLUKE5159990
r: 03327879 p: 2870.224 pid: 166129 b: FLUKE q: 0 st: lt: 10 ean: 0195112122020 sr: FLUKE 5590693 sr_no_br: 5590693 sr_no_br_cl: 5590693 sr_cl: FLUKE5590693 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FEV350/TY2 PRO EV charging station analyser for type 2 with TruTest software in bag - 5590693 cn: TEST DEVICE cn2: TEST DEVICE cn_clear: TESTDEVICE d: Product description Complete solution for safety and performance testing of AC EV charging stations with type 2 connectors Designed for technicians who need to perform and document multiple tests quickly and efficiently without carrying multiple tools Available measurements: PE (safety) earth test beforehand to ensure that no hazardous voltage is present, visual inspection, 30 mA earth leakage switch + 6 mA RDC-DD trip test, rated voltage + phase sequence, automatic control pilot (CP) with waveform analysis, proximity pilot, and fault testing. Supported measurements: earth connection, insulation and loop/grid impedance with Fluke's compatible multifunction installation testers for installation certification/inspections via Bluetooth wireless connection. Wiring configuration diagrams and info screens for seamless integration with TruTest software for report generation. Includes TruTest EV charging software module for documentation and reporting. Provides predefined test plans and successful/failed indications for measurement results to simplify analysis and time spent on testing. ds: dsc: Scope of delivery FEV350/BASIC Test Analyzer FEV300-CON-TY2 Type 2 plug Zero adjustment adapter/TY2 TPAK Magnetic suspension clip Carrying case TruTest software licence kts: EV charging station analyser for type 2 with TruTest software in bag kpn: FEV350/TY2 PRO kpn_dash: kpn_clear: FEV350TY2PRO bkpn: FLUKE FEV350/TY2 PRO bkpn_clear: FLUKE FEV350TY2PRO c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Test device | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke test device sr_no_br_cl_ns: 5590693 sr_ns: FLUKE5590693
r: 03327876 p: 2780.229 pid: 166145 b: FLUKE q: 0 st: lt: 10 ean: 0195112122006 sr: FLUKE 5590668 sr_no_br: 5590668 sr_no_br_cl: 5590668 sr_cl: FLUKE5590668 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FEV350/TY2/TY1 PRO EV charging station analyser for type 1 and 2 with TruTest software in bag - 5590668 cn: TEST DEVICE cn2: TEST DEVICE cn_clear: TESTDEVICE d: Product description Complete solution for safety and performance testing of AC EV charging stations with type 2 or type 1 connectors Designed for technicians who need to perform and document multiple tests quickly and efficiently without carrying multiple tools Available measurements: PE (safety) ground test beforehand to ensure that no hazardous voltage is present, visual inspection, 30 mA ground fault switch + 6 mA RDC-DD trip test, rated voltage + phase sequence, automatic control pilot (CP) with waveform analysis, proximity pilot, and fault testing. Supported measurements: earth connection, insulation and loop/grid impedance with Fluke's compatible multifunction installation testers for installation certification/inspections via Bluetooth wireless connection. Wiring configuration diagrams and info screens for seamless integration with TruTest software for report generation. Includes TruTest EV charging software module for documentation and reporting. Provides predefined test plans and successful/failed indications for measurement results to simplify analysis and time spent on testing. ds: dsc: Scope of delivery FEV350/BASIC Test Analyzer FEV300-CON-TY1 Type 1 plug FEV300-CON-TY2 Type 2 plug Zero adjustment adapter/TY1 Zero adjustment adapter/TY2 TPAK Magnetic suspension clip Carrying case TruTest software licence kts: EV charging station analyser for type 1 and 2 with TruTest software in bag kpn: FEV350/TY2/TY1 PRO kpn_dash: kpn_clear: FEV350TY2TY1PRO bkpn: FLUKE FEV350/TY2/TY1 PRO bkpn_clear: FLUKE FEV350TY2TY1PRO c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Test device | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke test device sr_no_br_cl_ns: 5590668 sr_ns: FLUKE5590668
r: 03392939 p: 2742.507 pid: 178070 b: FLUKE q: 0 st: lt: 8 ean: 0195112148860 sr: FLUKE 6093290 sr_no_br: 6093290 sr_no_br_cl: 6093290 sr_cl: FLUKE6093290 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1673 FC SCH/FEV300 multifunctional installation tester with test adapter set for EV charging stations - 6093290 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Simple bidirectional user interface eliminates complex multi-level menus Easy installation with the colour touch screen, smart device or a PC Fast and accurate testing with automatic test and automatic measurement validation Fluke Connect compatibility eliminates the need for data entry View results and generate certificates on-site with Fluke TruTest-software (not included) The Fluke 1673 FC multifunction installation tester will revolutionise the way you work. The Fluke 1673 FC multifunction installation tester has all the features of the 1672, such as earth resistance testing, automatic test functionality and compatibility with Fluke Connect. With its ergonomic design, seamless user interface, integrated data management capabilities, wireless connectivity and comprehensive reporting software, the 1673 FC sets the new standard as an integrated installation testing solution. With the 1670-series installation testers, you can check the safety of electrical installations in residential, commercial and industrial applications and comply with IEC 60364 requirements and all relevant local standards of IEC 61557. Perform your required tests up to 30% faster and reduce the time spent on documentation by up to 50%, all with full confidence in the data you collect. Fluke 1670-series multifunction installation testers streamline your installation and test preparations with the help of the intuitive user interface and high-resolution colour touchscreen. You can enter site information and set test routes directly from the tester, your mobile device or from a PC, and as you test you can edit this information directly on the instrument, ensuring accurate data. Key features Field-updatable - you can apply rule changes or improvements to the tester in the field. Compact, lightweight (less than 1.6 kg) and with padded neck strap leaving your hands free. Colour touch screen and rotary knob for quick navigation, without complex multi-level menus. Rechargeable 2,500 mAh Li-ion battery for all-day testing. Standard USB-C charging port with fast charging support for convenient charging on the go. Newly designed professional carrying case for transporting and protecting your installation tester and accessories. Additional high-current loop mode allowing faster measurements than with non-trip loop tests for circuits protected by residual current devices. Insulation monitoring devices (IMD) testing. Surge protection device (SPD) functional test. Voltage drop measurement function. Z-max memory for loop tests for easy evaluation of the highest loop test value. Unique zeroing adapter for fast, reliable and accurate compensation for measurement and mains cables. Simultaneous voltage measurements between L-N, L-PE and N-PE using the power cord. This does not require changing the measurement connections. Simultaneously measure tripping time and tripping current of RCCBs (RCCB type AC, A, B, F and GFCI). Measures PEFC or PSC and loop impedance simultaneously and displays them on the dual screen. Ring tests allow you to select the required input connections without having to exchange test leads. Pass-through test with low test current (10 mA) to measure motor windings. The earth potential touch pad detects elevated earth potentials above 50 V and alerts you to potentially dangerous situations. ds: dsc: Scope of delivery Multifunctional installation tester FEV300 test adapter set for EV charging stations Heavy-duty power cord with a single input connector Carrying case USB-C power adapter for charging Probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Crocodile clips Li-Ion battery kts: multifunctional installation tester with test adapter set for EV charging stations kpn: 1673 FC SCH/FEV300 kpn_dash: kpn_clear: 1673FCSCHFEV300 bkpn: FLUKE 1673 FC SCH/FEV300 bkpn_clear: FLUKE 1673FCSCHFEV300 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 6093290 sr_ns: FLUKE6093290
r: 03317202 p: 2600.553 pid: 73205 b: FLUKE q: 0 st: lt: 8 ean: 0195112122433 sr: FLUKE 5592405 sr_no_br: 5592405 sr_no_br_cl: 5592405 sr_cl: FLUKE5592405 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1537 advanced insulation resistance tester and megohmmeters - 5592405 cn: INSULATION RESISTANCE TESTER cn2: INSULATION RESISTANCE TESTER cn_clear: INSULATIONRESISTANCETESTER d: Product description User-selectable voltages from 250 V - 2500 V Measurement of insulation resistance up to 500 GOhm Short-circuit current up to 5 mA for fast, stable measurements Automatically calculate PI and DAR Perform 1300+ insulation tests on one set of batteries Fast, accurate and reliable insulation tests in a lightweight, portable package The Fluke 1535 and 1537 2500 V insulation resistance testers are designed to simplify first-line troubleshooting, whether you are on the factory floor or working on site at a solar installation. With these testers, where the user can select test voltages from 250 V to 2,500 V and with resistance measurements up to 500 GOhm, you can do more work with a single instrument. Featuring an intuitive user interface, a short-circuit current of up to 5 mA and a CAT IV specification of 600 V, these portable high-voltage insulation testers can make fast and stable resistance measurements wherever you take them. The 1537 Insulation Resistance Tester also allows you to save measurements for later review or transfer via PC using the supplied software. Selectable voltage tests: Customise your tests with user-selectable voltages of 250 V, 500 V, 1,000 V and 2,500 V for both industrial and solar energy applications. Comprehensive insulation resistance measurement: Achieve insulation resistance measurements up to 500 GOhm for in-depth analysis. Intelligent calculations: Automatically calculates polarisation index (PI) and dielectric absorption ratio (DAR, Dielectric Absorption Ratio), minimising the influence of environmental factors. High measurement capacity: Perform up to 1,300 measurements at 2,500 V or 6,500 measurements at 250 V with a single set of batteries, increasing productivity. Enhanced safety features: Benefit from a CAT IV specification of 600V and a built-in voltage alarm function for increased safety during operations. Dielectric discharge rate calculation: Automatically calculate the dielectric discharge rate (DD, Discharge Rate) to help identify problems with inaccessible insulation. Slope test mode: Linearly increase the applied test voltage by 100 V/s to identify potentially hard-to-identify faults. Visual and audible continuity indicator:Check continuity visually on the screen or with the audible indicator, so you can concentrate on your testing procedure without looking at the display. Customisable test parameters:Set user-defined labels, adjust test duration and save measurement results for a customised testing experience. Effortless data management:Download and manage data effortlessly with the included PC software.<liComprehensive warranty:Enjoy peace of mind with an extended 3-year warranty. ds: dsc: Scope of delivery Fluke 1537 insulation resistance tester Test leads with alligator clips (red, black, green) Probe (red, black) Carrying case USB cable) PC software (downloadable from Fluke website) kts: advanced insulation resistance tester and megohmmeters kpn: 1537 kpn_dash: kpn_clear: 1537 bkpn: FLUKE 1537 bkpn_clear: FLUKE 1537 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Insulation resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke insulation resistance tester sr_no_br_cl_ns: 5592405 sr_ns: FLUKE5592405
r: 03327872 p: 2561.676 pid: 166119 b: FLUKE q: 0 st: lt: 10 ean: 0195112043004 sr: FLUKE 5348097 sr_no_br: 5348097 sr_no_br_cl: 5348097 sr_cl: FLUKE5348097 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FEV350/TY2 EV charging station analyser for type 2 connectors in bag - 5348097 cn: TEST DEVICE cn2: TEST DEVICE cn_clear: TESTDEVICE d: Product description Complete solution for safety and performance testing of AC EV charging stations with type 2 connectors Designed for technicians who need to perform and document multiple tests quickly and efficiently without carrying multiple tools Available measurements: PE (safety) earth test beforehand to ensure that no hazardous voltage is present, visual inspection, 30 mA earth leakage switch + 6 mA RDC-DD trip test, rated voltage + phase sequence, automatic control pilot (CP) with waveform analysis, proximity pilot, and fault testing. Supported measurements: earth connection, insulation and loop/grid impedance with Fluke's compatible multifunction installation testers for installation certification/inspections via Bluetooth wireless connection. Wiring configuration diagrams and info screens for seamless integration with TruTest software for report generation. Includes TruTest EV charging software module for documentation and reporting. Provides predefined test plans and successful/failed indications for measurement results to simplify analysis and time spent on testing. ds: dsc: Scope of delivery FEV350/BASIC Test Analyzer FEV300-CON-TY2 Type 2 plug Zero adjustment adapter/TY2 TPAK Magnetic suspension clip Carrying case kts: EV charging station analyser for type 2 connectors in bag kpn: FEV350/TY2 kpn_dash: kpn_clear: FEV350TY2 bkpn: FLUKE FEV350/TY2 bkpn_clear: FLUKE FEV350TY2 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Test device | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke test device sr_no_br_cl_ns: 5348097 sr_ns: FLUKE5348097
r: 03343207 p: 2516.185 pid: 166148 b: FLUKE q: 0 st: lt: 10 ean: 0195112119624 sr: FLUKE 5581079 sr_no_br: 5581079 sr_no_br_cl: 5581079 sr_cl: FLUKE5581079 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1673 FC SCH FTT multifunctional installation tester with TruTest software bundle in case - 5581079 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Simple bidirectional user interface eliminates complex multi-level menus Easy installation with the colour touch screen, smart device or a PC Fast and accurate testing with automatic test and automatic measurement validation Fluke Connect compatibility eliminates the need for data entry View results and generate certificates on-site with Fluke TruTest- software The Fluke 1673 FC multifunction installation tester with the TruTest software bundle will revolutionise the way you work. The Fluke 1673 FC multifunction installation tester has all the features of the 1672, such as earth resistance testing, automatic test functionality and compatibility with Fluke Connect. With its ergonomic design, seamless user interface, integrated data management capabilities, wireless connectivity and comprehensive reporting software, the 1673 FC sets the new standard as an integrated installation testing solution. With the 1670-series installation testers, you can check the safety of electrical installations in residential, commercial and industrial applications and comply with IEC 60364 requirements and all relevant local standards of IEC 61557. Perform your required tests up to 30% faster and reduce the time spent on documentation by up to 50%, all with full confidence in the data you collect. Fluke 1670-series multifunction installation testers streamline your installation and test preparations with the help of the intuitive user interface and high-resolution colour touchscreen. You can enter site information and set test routes directly from the tester, your mobile device or from a PC, and as you test you can edit this information directly on the instrument, ensuring accurate data. ds: dsc: Scope of delivery Multifunctional installation tester Heavy-duty power cord with single input connector Carrying case USB-C power adapter for charging TP165X probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Alligator clips Li-Ion battery Fluke TruTest software kts: multifunctional installation tester with TruTest software bundle in case kpn: 1673 FC SCH FTT kpn_dash: kpn_clear: 1673FCSCHFTT bkpn: FLUKE 1673 FC SCH FTT bkpn_clear: FLUKE 1673FCSCHFTT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 5581079 sr_ns: FLUKE5581079
r: 03327869 p: 2510.808 pid: 166141 b: FLUKE q: 0 st: lt: 10 ean: 0195112042984 sr: FLUKE 5348072 sr_no_br: 5348072 sr_no_br_cl: 5348072 sr_cl: FLUKE5348072 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FEV350/TY2/TY1 EV charging station analyser for type 1 and 2 connectors in bag - 5348072 cn: TEST DEVICE cn2: TEST DEVICE cn_clear: TESTDEVICE d: Product description Complete solution for safety and performance testing of AC EV charging stations with type 2 or type 1 connectors Designed for technicians who need to perform and document multiple tests quickly and efficiently without carrying multiple tools Available measurements: PE (safety) ground test beforehand to ensure that no hazardous voltage is present, visual inspection, 30 mA ground fault switch + 6 mA RDC-DD trip test, rated voltage + phase sequence, automatic control pilot (CP) with waveform analysis, proximity pilot, and fault testing. Supported measurements: earth connection, insulation and loop/grid impedance with Fluke's compatible multifunction installation testers for installation certification/inspections via Bluetooth wireless connection. Wiring configuration diagrams and info screens for seamless integration with TruTest software for report generation. Includes TruTest EV charging software module for documentation and reporting. Provides predefined test plans and successful/failed indications for measurement results to simplify analysis and time spent on testing. ds: dsc: Scope of delivery FEV350/BASIC Test Analyzer FEV300-CON-TY1 Type 1 plug FEV300-CON-TY2 Type 2 plug Zero adjustment adapter/TY1 Zero adjustment adapter/TY2 TPAK Magnetic suspension clip Carrying case kts: EV charging station analyser for type 1 and 2 connectors in bag kpn: FEV350/TY2/TY1 kpn_dash: kpn_clear: FEV350TY2TY1 bkpn: FLUKE FEV350/TY2/TY1 bkpn_clear: FLUKE FEV350TY2TY1 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Test device | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke test device sr_no_br_cl_ns: 5348072 sr_ns: FLUKE5348072
r: 08106988 p: 2484.573 pid: 158984 b: FLUKE q: 0 st: lt: 10 ean: 0195112013564 sr: FLUKE 5255306 sr_no_br: 5255306 sr_no_br_cl: 5255306 sr_cl: FLUKE5255306 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Alignment tool type Belt alignment tool Measuring range 10 m n: FLUKE 835 belt alignment device with green laser in case (4x AAA batteries) - 5255306 cn: ALIGNMENT TOOL cn2: ALIGNMENT TOOL cn_clear: ALIGNMENTTOOL d: Product description Specially designed for belt alignment work as it is easy to use and requires only one operator. The strong magnets on the two units attach to virtually any belt surface, making it the ideal partner for most belt alignment jobs. It uses the proven OPTALIGN reflected beam principle for maximum angular resolution to generate accurate and reliable measurements. The time-saving method requires no cross-checking and shows offset, vertical and horizontal angle simultaneously. With four AAA batteries, the Fluke 835 offers 6 hours of continuous use. Corrections are quickly made live; true alignment is achieved when the transmitted laser line and the corresponding reflected laser line harmonise with the respective reference line. Advantages Fast, easy, full belt alignment - no training required Efficient operation by one person Reflected laser technology doubles the distance, improving accuracy Light, robust and sturdy: A small tool in your bag to take with you wherever you go No small parts to lose Strong magnets attach to any size of belt or gear ds: dsc: Scope of delivery 835 laser unit (green laser) 835 reflector unit 4 batteries (AAA) Fabric pouch Safety information Quick guide kts: belt alignment device with green laser in case (4x AAA batteries) kpn: 835 kpn_dash: kpn_clear: 835 bkpn: FLUKE 835 bkpn_clear: FLUKE 835 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Alignment tool | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke alignment tool sr_no_br_cl_ns: 5255306 sr_ns: FLUKE5255306
