r: 03076533 p: 76 pid: 10079 b: FLUKE q: 0 st: lt: 8 ean: 0095969906340 sr: FLUKE 5075484 sr_no_br: 5075484 sr_no_br_cl: 5075484 sr_cl: FLUKE5075484 sr_dash: sold: 608 p_range: none act: 1 avo: av: Battery voltage 3,6 V Capacity (battery) 5200 mAh n: FLUKE PLS RBP5 li-ion battery for PLS line and spot lasers 5 V 2.0 Ah - 5075484 cn: RECHARGEABLE BATTERY cn2: RECHARGEABLE BATTERY cn_clear: RECHARGEABLEBATTERY d: Product description: With the rechargeable battery set PLS RBP5, you can extend the useful life of your laser spirit level up to 3x and no longer need to buy alkaline batteries. The RBP5 is compatible with our latest point, line and combined laser spirit levels, PLS 3G, 3R, 5G, 5R, 6G, 6R, 180G, 180R. Avoid downtime during work due to dead batteries thanks to the PLS RBP5 and avoid having to buy extra batteries. The PLS RBP5 SINGLE SET is a separately available standalone accessory that comes with the rechargeable battery only. Features PLS RBP5 SINGLE SET: Composition: Lithium-ion Voltage: 3.6 V Capacity: 5200 mAh Key features: Rechargeable battery only 3x longer operating time for your PLS laser spirit level* (table in overview) Purchase of alkaline batteries no longer necessary Compatible with PLS handheld lasers (3R, 3G, 5R, 5G, 6R, 6G, 180R, 180G) ds: dsc: kts: li-ion battery for PLS line and spot lasers 5 V 2.0 Ah kpn: PLS RBP5 kpn_dash: kpn_clear: PLSRBP5 bkpn: FLUKE PLS RBP5 bkpn_clear: FLUKE PLSRBP5 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Rechargeable battery | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke rechargeable battery sr_no_br_cl_ns: 5075484 sr_ns: FLUKE5075484
r: 02957889 p: 111 pid: 3527 b: FLUKE q: 0 st: lt: 8 ean: 0095969437660 sr: FLUKE 3100477 sr_no_br: 3100477 sr_no_br_cl: 3100477 sr_cl: FLUKE3100477 sr_dash: sold: 333 p_range: none act: 1 avo: av: n: FLUKE SV225 leakage voltage adapter - 3100477 cn: PLUG cn2: PLUG cn_clear: PLUG d: Product description: Leakage voltage can occur in electrical installations due to capacitance between wires. This can produce erroneous readings in high-impedance meters. The SV225 solves this without compromising safety. Key features For live wires, the meter indicates the actual voltage For circuits that are not energised, the meter indicates close to zero (even if there are leakage voltages) Can be used with all modern meters that have standard spacing between inputs Complies with CAT III 1000 V, CAT IV 600 V ds: dsc: kts: leakage voltage adapter kpn: SV225 kpn_dash: kpn_clear: SV225 bkpn: FLUKE SV225 bkpn_clear: FLUKE SV225 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Plug | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke plug sr_no_br_cl_ns: 3100477 sr_ns: FLUKE3100477
r: 02957461 p: 326.33 pid: 71320 b: FLUKE q: 0 st: lt: 16 ean: 0095969435772 sr: FLUKE 3086235 sr_no_br: 3086235 sr_no_br_cl: 3086235 sr_cl: FLUKE3086235 sr_dash: sold: 326.33 p_range: none act: 1 avo: av: n: FLUKE VPS210-R voltage measurement probe set, 200 MHz, one red - 3086235 cn: TEST LEAD SET cn2: TEST LEAD SET cn_clear: TESTLEADSET d: Product description: Double insulated voltage measuring probe for 190 series ScopeMeter Specifications Attenuation: 10x Bandwidth: 200 MHz Max. input voltage: 1000 V CAT II or 600 V CAT III Max. voltage to ground: 1000 V CAT II or 600 V CAT III per IEC / EN61010-031 Input resistance: 10 M? Input capacitance: 12 pF Cable length: 1.2 m ds: dsc: Scope of delivery 600 V CAT III / 1000 V CAT II approved 10:1 voltage measuring probe Hook clamp for probe pin 4 mm probe pin Shaft cable with hook clamp Shaft cable with mini crocodile clip Insulation sleeve kts: voltage measurement probe set, 200 MHz, one red kpn: VPS210-R kpn_dash: VPS210 kpn_clear: VPS210R bkpn: FLUKE VPS210-R bkpn_clear: FLUKE VPS210R c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Test lead set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke test lead set sr_no_br_cl_ns: 3086235 sr_ns: FLUKE3086235
r: 02957417 p: 86 pid: 73555 b: FLUKE q: 0 st: lt: 8 ean: 0095969052634 sr: FLUKE 646668 sr_no_br: 646668 sr_no_br_cl: 646668 sr_cl: FLUKE646668 sr_dash: sold: 86 p_range: none act: 1 avo: av: Quantity per set 2 n: FLUKE HC120 hook clips (set of 2: red, grey) - 646668 cn: TEST CLIP SET cn2: TEST CLIP SET cn_clear: TESTCLIPSET d: Product description: Set of two hook clamps (one red, one grey) Designed for use with STL 120 shielded test leads, VPS40 and TL75 test leads. For wires up to max. 2.5 mm Contact material is made of reinforced nickel-plated steel ds: dsc: kts: hook clips (set of 2: red, grey) kpn: HC120 kpn_dash: kpn_clear: HC120 bkpn: FLUKE HC120 bkpn_clear: FLUKE HC120 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Measuring clamp set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke measuring clamp set sr_no_br_cl_ns: 646668 sr_ns: FLUKE646668
r: 08106961 p: 2957.71 pid: 72779 b: FLUKE q: 0 st: lt: 8 ean: 0095969857031 sr: FLUKE 4920947 sr_no_br: 4920947 sr_no_br_cl: 4920947 sr_cl: FLUKE4920947 sr_dash: sold: 0 p_range: none act: 1 avo: av: n: FLUKE PQ400 electrical measuring window for mains power quality - 4920947 cn: ACCESSORIES/PART MEASURING TOOL cn2: ACCESSORIES/PART MEASURING TOOL cn_clear: ACCESSORIESPARTMEASURINGTOOL d: Product description Reduced risk: fixed voltage and power connections are accessible without opening the distribution panel door Improved efficiency: quickly connect your logger or analyser and start taking measurements faster than ever before Easy installation: a standard step drill and electro-hydraulic hole punch are the simple means by which the window is quickly mounted in the distribution panel Fluke's PQ400 electrical measurement window allows three-phase measuring instruments to be connected to live panels without having to open the panel door or use additional personal protective equipment (PPE)1. Compliance without compromise. Safety without loss of quality. The Fluke PQ400 gives you access to the essential power quality and energy data you need, while reducing test time and helping you ensure safety. Reduce the risk of arcing and electrocution, while increasing the safety of your staff Lower maintenance costs and reduce downtime by performing critical mains power and energy measurements without opening the panel door. This allows recording and monitoring at any time without disrupting operations Reduce work permit requirements and simplify processes by reducing the hazards associated with making measurements on open distribution panels, saving time and effort Increase measurement efficiency and reduce the need for personal protective equipment (PPE)1 against arcs. This saves time, increases efficiency and increases operator comfort Functions and features With permanently connected voltage and current sensors in the electrical distributor, you can take power quality and energy measurements through the external access points without having to open the panel door. This significantly reduces operator risk Voltage and current connections for three-phase voltage, neutral and earth cover most measurement scenarios With automatic probe detection on the Fluke 1740 and 1730 series Power Quality Loggers and Energy Loggers and compatible clamps, there is no need to open the cabinet to check the clamp model Full 360-degree rotation allows the PQ400 window to be rotated in any direction Easy installation with a step drill and electro-hydraulic hole punch (114.3 mm, diameter 4.5 inches) Safety specification CAT IV, 600 V and CAT III 1000 V according to IEC61010-2-30 Compatibility with standard insulated 4mm safety test leads makes it easier to make voltage connections, increase safety by reducing the risk of accidental touching of live electrical components, and reduce the need to purchase special voltage test leads How it works Fluke's PQ400 electrical measurement window is a permanently mounted interface that gives technicians near-instant access to electrical distributors, for making essential power quality and energy measurements. The PQ400 can be mounted using a standard step drill and an electro-hydraulic hole punch (hole diameter 114.3 mm, 4.5 inches). The PQ400 allows users to make three-phase voltage, current and earth connections for the most common measurement configurations. After assembly, you can simply unlock the window cover, lift the cover and connect the voltage measurement leads of the logger or analyser. Then connect the measurement leads of the current sensors and you can take essential measurements. When you are done, simply remove the voltage and current connections from the front panel interface and lock the window cover, leaving the internal connections in place for future use. ds: dsc: Scope of delivery PQ400 housing 4 2-metre cables (male to male) to connect Fluke-17xx iFlex power probes. Cable marking set 3P+N+PE Cable ties Instruction sheet kts: electrical measuring window for mains power quality kpn: PQ400 kpn_dash: kpn_clear: PQ400 bkpn: FLUKE PQ400 bkpn_clear: FLUKE PQ400 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessories/part measuring tool | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessories/part measuring tool sr_no_br_cl_ns: 4920947 sr_ns: FLUKE4920947
r: 08107080 p: 2334.59 pid: 74227 b: FLUKE q: 0 st: lt: 8 ean: 0095969906425 sr: FLUKE 5075807 sr_no_br: 5075807 sr_no_br_cl: 5075807 sr_cl: FLUKE5075807 sr_dash: sold: 0 p_range: none act: 1 avo: av: n: FLUKE PQ400/B basic electrical power quality measurement window - 5075807 cn: ACCESSORIES/PART MEASURING TOOL cn2: ACCESSORIES/PART MEASURING TOOL cn_clear: ACCESSORIESPARTMEASURINGTOOL d: Product description Reduced risk: fixed voltage and power connections are accessible without opening the distribution panel door Improved efficiency: quickly connect your logger or analyser and start taking measurements faster than ever before Easy installation: a standard step drill and electro-hydraulic hole punch are the simple means by which the window is quickly mounted in the distribution panel Fluke's PQ400 electrical measurement window allows three-phase measuring instruments to be connected to live panels without having to open the panel door or use additional personal protective equipment (PPE)1. Compliance without compromise. Safety without loss of quality. The Fluke PQ400 gives you access to the essential power quality and energy data you need, while reducing test time and helping you ensure safety. Reduce the risk of arcing and electrocution, while increasing the safety of your staff Lower maintenance costs and reduce downtime by performing critical mains power and energy measurements without opening the panel door. This allows recording and monitoring at any time without disrupting operations Reduce work permit requirements and simplify processes by reducing the hazards associated with making measurements on open distribution panels, saving time and effort Increase measurement efficiency and reduce the need for personal protective equipment (PPE)1 against arcs. This saves time, increases efficiency and increases operator comfort Functions and features With permanently connected voltage and current sensors in the electrical distributor, you can take power quality and energy measurements through the external access points without having to open the panel door. This significantly reduces operator risk Voltage and current connections for three-phase voltage, neutral and earth cover most measurement scenarios With automatic probe detection on the Fluke 1740 and 1730 series Power Quality Loggers and Energy Loggers and compatible clamps, there is no need to open the cabinet to check the clamp model Full 360-degree rotation allows the PQ400 window to be rotated in any direction Easy installation with a step drill and electro-hydraulic hole punch (114.3 mm, diameter 4.5 inches) Safety specification CAT IV, 600 V and CAT III 1000 V according to IEC61010-2-30 Compatibility with standard insulated 4mm safety test leads makes it easier to make voltage connections, increase safety by reducing the risk of accidental touching of live electrical components, and reduce the need to purchase special voltage test leads How it works Fluke's PQ400 electrical measurement window is a permanently mounted interface that gives technicians near-instant access to electrical distributors, for making essential power quality and energy measurements. The PQ400 can be mounted using a standard step drill and an electro-hydraulic hole punch (hole diameter 114.3 mm, 4.5 inches). The PQ400 allows users to make three-phase voltage, current and earth connections for the most common measurement configurations. After assembly, you can simply unlock the window cover, lift the cover and connect the voltage measurement leads of the logger or analyser. Then connect the measurement leads of the current sensors and you can take essential measurements. When you are done, simply remove the voltage and current connections from the front panel interface and lock the window cover, leaving the internal connections in place for future use. ds: dsc: Scope of delivery PQ400 housing Instruction sheet kts: basic electrical power quality measurement window kpn: PQ400/B kpn_dash: kpn_clear: PQ400B bkpn: FLUKE PQ400/B bkpn_clear: FLUKE PQ400B c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessories/part measuring tool | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessories/part measuring tool sr_no_br_cl_ns: 5075807 sr_ns: FLUKE5075807
