r: 03208936 p: 4.67 pid: 34920 b: PFERD q: 0 st: lt: 11 ean: 4007220102718 sr: PFERD 44460150 sr_no_br: 44460150 sr_no_br_cl: 44460150 sr_cl: PFERD44460150 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Connection type (machine) Shank Width 15 mm Connection size (machine) 6 mm Grit size 150 n: PFERD F 6015/6 SiC 150 flap brushes silicon carbide 60x15 mm, shank dia. 6 mm, grit 150 for hard non-ferrous metals - 44460150 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD SIC mounted flap wheel F dia. 60x15 mm shank dia. 6 mm SIC150 for hard non-ferrous metals Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics Particularly recommended for use on titanium alloys Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes silicon carbide 60x15 mm, shank dia. 6 mm, grit 150 for hard non-ferrous metals kpn: F 6015/6 SiC 150 kpn_dash: kpn_clear: F60156SiC150 bkpn: PFERD F 6015/6 SiC 150 bkpn_clear: PFERD F60156SiC150 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44460150 sr_ns: PFERD44460150
r: 03208710 p: 4.67 pid: 33350 b: PFERD q: 0 st: lt: 10 ean: 4007220803790 sr: PFERD 44409094 sr_no_br: 44409094 sr_no_br_cl: 44409094 sr_cl: PFERD44409094 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 30 mm Connection type (machine) Shank Width 15 mm Connection size (machine) 6 mm Grit size 80 n: PFERD F 3015/6 CO-COOL 80 flap abrasive with ceramic grit 30x15 mm, shank dia. 6 mm, grit 80 high efficiency on stainless steel - 44409094 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Ceramic oxide grain mounted flap wheel F dia. 30x15 mm shank dia. 6 mm CO-COOL80 for high stock removal on stainless steel Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well Consistently high performance due to self-sharpening ceramic oxide grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap abrasive with ceramic grit 30x15 mm, shank dia. 6 mm, grit 80 high efficiency on stainless steel kpn: F 3015/6 CO-COOL 80 kpn_dash: F 3015/6 CO kpn_clear: F30156COCOOL80 bkpn: PFERD F 3015/6 CO-COOL 80 bkpn_clear: PFERD F30156COCOOL80 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44409094 sr_ns: PFERD44409094
r: 03208935 p: 4.67 pid: 32533 b: PFERD q: 0 st: lt: 13 ean: 4007220102701 sr: PFERD 44460120 sr_no_br: 44460120 sr_no_br_cl: 44460120 sr_cl: PFERD44460120 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Connection type (machine) Shank Width 15 mm Connection size (machine) 6 mm Grit size 120 n: PFERD F 6015/6 SiC 120 flap brushes silicon carbide 60x15 mm, shank dia. 6 mm, grain 120 for hard non-ferrous metals - 44460120 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD SIC mounted flap wheel F dia. 60x15 mm shank dia. 6 mm SIC120 for hard non-ferrous metals Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics Particularly recommended for use on titanium alloys Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes silicon carbide 60x15 mm, shank dia. 6 mm, grain 120 for hard non-ferrous metals kpn: F 6015/6 SiC 120 kpn_dash: kpn_clear: F60156SiC120 bkpn: PFERD F 6015/6 SiC 120 bkpn_clear: PFERD F60156SiC120 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44460120 sr_ns: PFERD44460120
r: 03208703 p: 4.67 pid: 34019 b: PFERD q: 0 st: lt: 6 ean: 4007220803776 sr: PFERD 44409054 sr_no_br: 44409054 sr_no_br_cl: 44409054 sr_cl: PFERD44409054 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 30 mm Connection type (machine) Shank Width 15 mm Connection size (machine) 6 mm Grit size 40 n: PFERD F 3015/6 CO-COOL 40 flap abrasive with ceramic grit 30x15 mm, shank dia. 6 mm, grit 40 high efficiency on stainless steel - 44409054 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Ceramic oxide grain mounted flap wheel F dia. 30x15 mm shank dia. 6 mm CO-COOL40 for high stock removal on stainless steel Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well Consistently high performance due to self-sharpening ceramic oxide grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap abrasive with ceramic grit 30x15 mm, shank dia. 6 mm, grit 40 high efficiency on stainless steel kpn: F 3015/6 CO-COOL 40 kpn_dash: F 3015/6 CO kpn_clear: F30156COCOOL40 bkpn: PFERD F 3015/6 CO-COOL 40 bkpn_clear: PFERD F30156COCOOL40 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44409054 sr_ns: PFERD44409054
r: 03208727 p: 4.67 pid: 33355 b: PFERD q: 0 st: lt: 8 ean: 4007220803806 sr: PFERD 44409134 sr_no_br: 44409134 sr_no_br_cl: 44409134 sr_cl: PFERD44409134 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 30 mm Connection type (machine) Shank Width 15 mm Connection size (machine) 6 mm Grit size 120 n: PFERD F 3015/6 CO-COOL 120 flap abrasive ceramic grain 30x15 mm, shank dia. 6 mm, grain 120 high efficiency on stainless steel - 44409134 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Ceramic oxide grain mounted flap wheel F dia. 30x15 mm shank dia. 6 mm CO-COOL120 for high stock removal on stainless steel Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well Consistently high performance due to self-sharpening ceramic oxide grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap abrasive ceramic grain 30x15 mm, shank dia. 6 mm, grain 120 high efficiency on stainless steel kpn: F 3015/6 CO-COOL 120 kpn_dash: F 3015/6 CO kpn_clear: F30156COCOOL120 bkpn: PFERD F 3015/6 CO-COOL 120 bkpn_clear: PFERD F30156COCOOL120 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44409134 sr_ns: PFERD44409134
r: 04024129 p: 4.67 pid: 32664 b: PFERD q: 0 st: lt: 8 ean: 4007220803783 sr: PFERD 44409074 sr_no_br: 44409074 sr_no_br_cl: 44409074 sr_cl: PFERD44409074 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 30 mm Connection type (machine) Shank Width 15 mm Connection size (machine) 6 mm Grit size 60 n: PFERD F 3015/6 CO-COOL 60 flap abrasive with ceramic grit 30x15 mm, shank dia. 6 mm, grit 60 high efficiency on stainless steel - 44409074 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Ceramic oxide grain mounted flap wheel F dia. 30x15 mm shank dia. 6 mm CO-COOL60 for high stock removal on stainless steel Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well Consistently high performance due to self-sharpening ceramic oxide grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap abrasive with ceramic grit 30x15 mm, shank dia. 6 mm, grit 60 high efficiency on stainless steel kpn: F 3015/6 CO-COOL 60 kpn_dash: F 3015/6 CO kpn_clear: F30156COCOOL60 bkpn: PFERD F 3015/6 CO-COOL 60 bkpn_clear: PFERD F30156COCOOL60 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44409074 sr_ns: PFERD44409074
r: 03208934 p: 4.67 pid: 32527 b: PFERD q: 0 st: lt: 4 ean: 4007220102664 sr: PFERD 44460080 sr_no_br: 44460080 sr_no_br_cl: 44460080 sr_cl: PFERD44460080 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Connection type (machine) Shank Width 15 mm Connection size (machine) 6 mm Grit size 80 n: PFERD F 6015/6 SiC 80 flap brushes silicon carbide 60x15 mm, shank dia. 6 mm, grit 80 for hard non-ferrous metals - 44460080 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD SIC mounted flap wheel F dia. 60x15 mm shank dia. 6 mm SIC80 for hard non-ferrous metals Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics Particularly recommended for use on titanium alloys Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes silicon carbide 60x15 mm, shank dia. 6 mm, grit 80 for hard non-ferrous metals kpn: F 6015/6 SiC 80 kpn_dash: kpn_clear: F60156SiC80 bkpn: PFERD F 6015/6 SiC 80 bkpn_clear: PFERD F60156SiC80 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44460080 sr_ns: PFERD44460080
r: 57980119 p: 4.64 pid: 34294 b: PFERD q: 0 st: lt: 8 ean: 4007220155394 sr: PFERD 44508156 sr_no_br: 44508156 sr_no_br_cl: 44508156 sr_cl: PFERD44508156 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Connection type (machine) Shank Width 20 mm Connection size (machine) 6 mm Grit size 150 n: PFERD F 6020/6 A 150 flap brushes corundum 60x20 mm, shank dia. 6 mm, 150-grit paper for fine grinding & finishing - 44508156 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 60x20 mm shank dia. 6 mm A150 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 60x20 mm, shank dia. 6 mm, 150-grit paper for fine grinding & finishing kpn: F 6020/6 A 150 kpn_dash: kpn_clear: F60206A150 bkpn: PFERD F 6020/6 A 150 bkpn_clear: PFERD F60206A150 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44508156 sr_ns: PFERD44508156
r: 03209028 p: 4.64 pid: 33417 b: PFERD q: 0 st: lt: 8 ean: 4007220155417 sr: PFERD 44508326 sr_no_br: 44508326 sr_no_br_cl: 44508326 sr_cl: PFERD44508326 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Connection type (machine) Shank Width 20 mm Connection size (machine) 6 mm Grit size 320 n: PFERD F 6020/6 A 320 flap brushes corundum 60x20 mm, shank dia. 6 mm, 320 grit for fine grinding & finishing - 44508326 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 60x20 mm shank dia. 6 mm A320 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 60x20 mm, shank dia. 6 mm, 320 grit for fine grinding & finishing kpn: F 6020/6 A 320 kpn_dash: kpn_clear: F60206A320 bkpn: PFERD F 6020/6 A 320 bkpn_clear: PFERD F60206A320 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44508326 sr_ns: PFERD44508326
r: 03209027 p: 4.64 pid: 34924 b: PFERD q: 0 st: lt: 8 ean: 4007220155400 sr: PFERD 44508246 sr_no_br: 44508246 sr_no_br_cl: 44508246 sr_cl: PFERD44508246 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Connection type (machine) Shank Width 20 mm Connection size (machine) 6 mm Grit size 240 n: PFERD F 6020/6 A 240 flap brushes corundum 60x20 mm, shank dia. 6 mm, grain 240 for fine grinding & finishing - 44508246 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 60x20 mm shank dia. 6 mm A240 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 60x20 mm, shank dia. 6 mm, grain 240 for fine grinding & finishing kpn: F 6020/6 A 240 kpn_dash: kpn_clear: F60206A240 bkpn: PFERD F 6020/6 A 240 bkpn_clear: PFERD F60206A240 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44508246 sr_ns: PFERD44508246
r: 02059115 p: 4.4 pid: 42798 b: 3M q: 0 st: lt: 8 ean: 54046719325387 sr: 3M 7000033214 sr_no_br: 7000033214 sr_no_br_cl: 7000033214 sr_cl: 3M7000033214 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Grit size 80 Connection size (machine) 6 mm Connection type (machine) Shank Width 30 mm n: 3M 64509 Flap brush with pin 339SM, dia. 60 mm x 30 mm, grit 80 - 7000033214 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description Flexible Equipped with a fixed pin Outstanding cutting and polishing properties The 3M 339SM Flap brushes on fixed shank are used for finishing and polishing metal components. The great advantage of the flap brushes is that they form to the surface of the workpiece. The 339SM Flap brushes on fixed shank are suitable for all types of metals, including stainless steel and special alloys, and are used on a straight grinder. ds: dsc: kts: Flap brush with pin 339SM, dia. 60 mm x 30 mm, grit 80 kpn: 64509 kpn_dash: kpn_clear: 64509 bkpn: 3M 64509 bkpn_clear: 3M 64509 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 7000033214 sr_ns: 3M7000033214
r: 02059107 p: 4.4 pid: 40717 b: 3M q: 0 st: lt: 8 ean: 54046719325295 sr: 3M 7000074920 sr_no_br: 7000074920 sr_no_br_cl: 7000074920 sr_cl: 3M7000074920 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Grit size 40 Connection size (machine) 6 mm Connection type (machine) Shank Width 15 mm n: 3M 64503 Flap brush with pin 339SM, dia. 60 mm x 15 mm, grit 40 - 7000074920 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description Flexible Equipped with a fixed pin Outstanding cutting and polishing properties The 3M 339SM Flap brushes on fixed shank are used for finishing and polishing metal components. The great advantage of the flap brushes is that they form to the surface of the workpiece. The 339SM Flap brushes on fixed shank are suitable for all types of metals, including stainless steel and special alloys, and are used on a straight grinder. ds: dsc: kts: Flap brush with pin 339SM, dia. 60 mm x 15 mm, grit 40 kpn: 64503 kpn_dash: kpn_clear: 64503 bkpn: 3M 64503 bkpn_clear: 3M 64503 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 7000074920 sr_ns: 3M7000074920
r: 02059113 p: 4.4 pid: 42794 b: 3M q: 0 st: lt: 10 ean: 54046719325363 sr: 3M 7000074924 sr_no_br: 7000074924 sr_no_br_cl: 7000074924 sr_cl: 3M7000074924 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Grit size 40 Connection size (machine) 6 mm Connection type (machine) Shank Width 30 mm n: 3M 64507 Flap brush with pin 339SM, dia. 60 mm x 30 mm, grit 40 - 7000074924 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description Flexible Equipped with a fixed pin Outstanding cutting and polishing properties The 3M 339SM Flap brushes on fixed shank are used for finishing and polishing metal components. The great advantage of the flap brushes is that they form to the surface of the workpiece. The 339SM Flap brushes on fixed shank are suitable for all types of metals, including stainless steel and special alloys, and are used on a straight grinder. ds: dsc: kts: Flap brush with pin 339SM, dia. 60 mm x 30 mm, grit 40 kpn: 64507 kpn_dash: kpn_clear: 64507 bkpn: 3M 64507 bkpn_clear: 3M 64507 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 7000074924 sr_ns: 3M7000074924
r: 02059110 p: 4.4 pid: 41249 b: 3M q: 0 st: lt: 8 ean: 54046719325318 sr: 3M 7000074922 sr_no_br: 7000074922 sr_no_br_cl: 7000074922 sr_cl: 3M7000074922 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Grit size 80 Connection size (machine) 6 mm Connection type (machine) Shank Width 15 mm n: 3M 64505 Flap brush with pin 339SM, dia. 60 mm x 15 mm, grit 80 - 7000074922 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description Flexible Equipped with a fixed pin Outstanding cutting and polishing properties The 3M 339SM Flap brushes on fixed shank are used for finishing and polishing metal components. The great advantage of the flap brushes is that they form to the surface of the workpiece. The 339SM Flap brushes on fixed shank are suitable for all types of metals, including stainless steel and special alloys, and are used on a straight grinder. ds: dsc: kts: Flap brush with pin 339SM, dia. 60 mm x 15 mm, grit 80 kpn: 64505 kpn_dash: kpn_clear: 64505 bkpn: 3M 64505 bkpn_clear: 3M 64505 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 7000074922 sr_ns: 3M7000074922
r: 02059109 p: 4.4 pid: 42792 b: 3M q: 0 st: lt: 8 ean: 54046719325301 sr: 3M 7000074921 sr_no_br: 7000074921 sr_no_br_cl: 7000074921 sr_cl: 3M7000074921 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Grit size 60 Connection size (machine) 6 mm Connection type (machine) Shank Width 15 mm n: 3M 64504 Flap brush with pin 339SM, dia. 60 mm x 15 mm, grit 60 - 7000074921 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description Flexible Equipped with a fixed pin Outstanding cutting and polishing properties The 3M 339SM Flap brushes on fixed shank are used for finishing and polishing metal components. The great advantage of the flap brushes is that they form to the surface of the workpiece. The 339SM Flap brushes on fixed shank are suitable for all types of metals, including stainless steel and special alloys, and are used on a straight grinder. ds: dsc: kts: Flap brush with pin 339SM, dia. 60 mm x 15 mm, grit 60 kpn: 64504 kpn_dash: kpn_clear: 64504 bkpn: 3M 64504 bkpn_clear: 3M 64504 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 7000074921 sr_ns: 3M7000074921
r: 02059116 p: 4.4 pid: 42799 b: 3M q: 0 st: lt: 8 ean: 54046719325394 sr: 3M 7000074926 sr_no_br: 7000074926 sr_no_br_cl: 7000074926 sr_cl: 3M7000074926 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Grit size 120 Connection size (machine) 6 mm Connection type (machine) Shank Width 30 mm n: 3M 64510 Flap brush with pin 339SM, dia. 60 mm x 30 mm, grit 120 - 7000074926 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description Flexible Equipped with a fixed pin Outstanding cutting and polishing properties The 3M 339SM Flap brushes on fixed shank are used for finishing and polishing metal components. The great advantage of the flap brushes is that they form to the surface of the workpiece. The 339SM Flap brushes on fixed shank are suitable for all types of metals, including stainless steel and special alloys, and are used on a straight grinder. ds: dsc: kts: Flap brush with pin 339SM, dia. 60 mm x 30 mm, grit 120 kpn: 64510 kpn_dash: kpn_clear: 64510 bkpn: 3M 64510 bkpn_clear: 3M 64510 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 7000074926 sr_ns: 3M7000074926
r: 02059117 p: 4.4 pid: 40723 b: 3M q: 0 st: lt: 8 ean: 54046719325400 sr: 3M 7000074927 sr_no_br: 7000074927 sr_no_br_cl: 7000074927 sr_cl: 3M7000074927 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Grit size 150 Connection size (machine) 6 mm Connection type (machine) Shank Width 30 mm n: 3M 64511 Flap brush with pin 339SM, dia. 60 mm x 30 mm, grit 150 - 7000074927 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description Flexible Equipped with a fixed pin Outstanding cutting and polishing properties The 3M 339SM Flap brushes on fixed shank are used for finishing and polishing metal components. The great advantage of the flap brushes is that they form to the surface of the workpiece. The 339SM Flap brushes on fixed shank are suitable for all types of metals, including stainless steel and special alloys, and are used on a straight grinder. ds: dsc: kts: Flap brush with pin 339SM, dia. 60 mm x 30 mm, grit 150 kpn: 64511 kpn_dash: kpn_clear: 64511 bkpn: 3M 64511 bkpn_clear: 3M 64511 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 7000074927 sr_ns: 3M7000074927
r: 02059120 p: 4.4 pid: 40960 b: 3M q: 0 st: lt: 8 ean: 54046719325431 sr: 3M 7000074930 sr_no_br: 7000074930 sr_no_br_cl: 7000074930 sr_cl: 3M7000074930 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Grit size 320 Connection size (machine) 6 mm Connection type (machine) Shank Width 30 mm n: 3M 64514 Flap brush with pin 339SM, dia. 60 mm x 30 mm, grit 320 - 7000074930 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description Flexible Equipped with a fixed pin Outstanding cutting and polishing properties The 3M 339SM Flap brushes on fixed shank are used for finishing and polishing metal components. The great advantage of the flap brushes is that they form to the surface of the workpiece. The 339SM Flap brushes on fixed shank are suitable for all types of metals, including stainless steel and special alloys, and are used on a straight grinder. ds: dsc: kts: Flap brush with pin 339SM, dia. 60 mm x 30 mm, grit 320 kpn: 64514 kpn_dash: kpn_clear: 64514 bkpn: 3M 64514 bkpn_clear: 3M 64514 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 7000074930 sr_ns: 3M7000074930
r: 02059118 p: 4.4 pid: 40728 b: 3M q: 0 st: lt: 8 ean: 54046719325417 sr: 3M 7000074928 sr_no_br: 7000074928 sr_no_br_cl: 7000074928 sr_cl: 3M7000074928 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Grit size 180 Connection size (machine) 6 mm Connection type (machine) Shank Width 30 mm n: 3M 64512 Flap brush with pin 339SM, dia. 60 mm x 30 mm, grit 180 - 7000074928 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description Flexible Equipped with a fixed pin Outstanding cutting and polishing properties The 3M 339SM Flap brushes on fixed shank are used for finishing and polishing metal components. The great advantage of the flap brushes is that they form to the surface of the workpiece. The 339SM Flap brushes on fixed shank are suitable for all types of metals, including stainless steel and special alloys, and are used on a straight grinder. ds: dsc: kts: Flap brush with pin 339SM, dia. 60 mm x 30 mm, grit 180 kpn: 64512 kpn_dash: kpn_clear: 64512 bkpn: 3M 64512 bkpn_clear: 3M 64512 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 7000074928 sr_ns: 3M7000074928
