r: 02285269 p: 0.59 pid: 14180 b: FISCHER q: 0 st: lt: 8 ean: 4006209886762 sr: FISCHER 88676 sr_no_br: 88676 sr_no_br_cl: 88676 sr_cl: FISCHER88676 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 10 mm Application General type (screw head) PZ3 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth 150 mm Length (Wall plug) 132 mm n: FISCHER 88676 frame plug F 10 M 132 electrolytically galvanised steel cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The screw fixing with countersunk head for the stress-free installation of window and door frames. The fischer metal frame fixing F-M is a special plug for the stress-free, lasting stand-off installation of window and door frames and of squared timbers. It consists of a metal sleeve and a zinc-plated steel screw. The F-M is set in a time-saving push-through installation. When the screw is tightened, the cone is pulled into the plug sleeve and expands against the wall of the drill hole. This ensures a fixation that is free from tensile force and pressure, thus guaranteeing a secure hold in solid and hollow building materials. The F-M is tested for fire resistance class R120, and offers safety for fire-protection-relevant applications. The F-M metal frame plug achieves fire resistance R 120. This allows for use in areas where fire resistance is relevant The operating principle prevents the window frame from being pulled against the substrate, and ensures a stress-free and long-lasting fixing of the frame The special plug geometry anchors the metal and plastic profiles against compressive and tensile loads, and allows for a secure hold of the window frame The cover caps (available separately) can be used to discreetly cover the screw heads Suitable for The F-M is suitable for push-through installation By tightening the screw, the cone is drawn into the sleeve and the fixing is expanded which wedges it inside the drill hole. The window frames are thus fixed in a stress-free manner The maximum installation torque is 5 Nm Building materials Concrete Vertically perforated brick Hollow blocks made from lightweight concrete Perforated sand-lime brick Solid sand-lime brick Aerated concrete Solid brick made from lightweight concrete Solid brick Application Window frames Door frames Squared timbers ds: dsc: kts: frame plug F 10 M 132 electrolytically galvanised steel kpn: 88676 kpn_dash: kpn_clear: 88676 bkpn: FISCHER 88676 bkpn_clear: FISCHER 88676 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 88676 sr_ns: FISCHER88676
r: 02315650 p: 0.57 pid: 176183 b: FISCHER q: 0 st: lt: 8 ean: 4006209906712 sr: FISCHER 90671 sr_no_br: 90671 sr_no_br_cl: 90671 sr_cl: FISCHER90671 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 90671 centring sleeve PBZ for M8, M10 and M12 cn: CENTERING SLEEVE cn2: CENTERING SLEEVE cn_clear: CENTERINGSLEEVE d: Product description Installation aid for centring the anchor rods and internal thread anchors. The fischer centring sleeve PBZ is an aid for centring anchor rods FIS A M8-M12 and FIS E M6 / M8 for fixing in aerated concrete with a conical drill hole. Facilitates the precise alignment of the fixing element and the overhead installations The centring sleeve PBZ fixes the anchor in the drill hole, thus also allowing for overhead installation Suitable for The centring sleeve PBZ is placed into the drill hole Afterwards, the drill hole is filled with injection mortar from the drill hole mouth and the anchor rod is set The centring sleeve PBZ fixes the anchor rod in the drill hole Building materials Aerated concrete Application Anchorage in aerated concrete with injection mortars FIS V, FIS VS LOW SPEED, FIS VW HIGH SPEED ds: dsc: kts: centring sleeve PBZ for M8, M10 and M12 kpn: 90671 kpn_dash: kpn_clear: 90671 bkpn: FISCHER 90671 bkpn_clear: FISCHER 90671 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Centering sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer centering sleeve sr_no_br_cl_ns: 90671 sr_ns: FISCHER90671
r: 87990392 p: 0.56 pid: 76435 b: FISCHER q: 0 st: lt: 6 ean: 4006209886748 sr: FISCHER 88674 sr_no_br: 88674 sr_no_br_cl: 88674 sr_cl: FISCHER88674 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 10 mm Application General type (screw head) PZ3 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 112 mm n: FISCHER 88674 frame plug F 10 M 112 electrolytically galvanised steel cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The screw fixing with countersunk head for the stress-free installation of window and door frames. The fischer metal frame fixing F-M is a special plug for the stress-free, lasting stand-off installation of window and door frames and of squared timbers. It consists of a metal sleeve and a zinc-plated steel screw. The F-M is set in a time-saving push-through installation. When the screw is tightened, the cone is pulled into the plug sleeve and expands against the wall of the drill hole. This ensures a fixation that is free from tensile force and pressure, thus guaranteeing a secure hold in solid and hollow building materials. The F-M is tested for fire resistance class R120, and offers safety for fire-protection-relevant applications. The F-M metal frame plug achieves fire resistance R 120. This allows for use in areas where fire resistance is relevant The operating principle prevents the window frame from being pulled against the substrate, and ensures a stress-free and long-lasting fixing of the frame The special plug geometry anchors the metal and plastic profiles against compressive and tensile loads, and allows for a secure hold of the window frame The cover caps (available separately) can be used to discreetly cover the screw heads Suitable for The F-M is suitable for push-through installation By tightening the screw, the cone is drawn into the sleeve and the fixing is expanded which wedges it inside the drill hole. The window frames are thus fixed in a stress-free manner The maximum installation torque is 5 Nm Building materials Concrete Vertically perforated brick Hollow blocks made from lightweight concrete Perforated sand-lime brick Solid sand-lime brick Aerated concrete Solid brick made from lightweight concrete Solid brick Application Window frames Door frames Squared timbers ds: dsc: kts: frame plug F 10 M 112 electrolytically galvanised steel kpn: 88674 kpn_dash: kpn_clear: 88674 bkpn: FISCHER 88674 bkpn_clear: FISCHER 88674 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 88674 sr_ns: FISCHER88674
r: 02287672 p: 0.54 pid: 15629 b: FISCHER q: 0 st: lt: 10 ean: 4006209886724 sr: FISCHER 88672 sr_no_br: 88672 sr_no_br_cl: 88672 sr_cl: FISCHER88672 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 10 mm Application General type (screw head) PZ3 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth 110 mm Length (Wall plug) 92 mm n: FISCHER 88672 frame plug F 10 M 92 electrolytically galvanised steel cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The screw fixing with countersunk head for the stress-free installation of window and door frames. The fischer metal frame fixing F-M is a special plug for the stress-free, lasting stand-off installation of window and door frames and of squared timbers. It consists of a metal sleeve and a zinc-plated steel screw. The F-M is set in a time-saving push-through installation. When the screw is tightened, the cone is pulled into the plug sleeve and expands against the wall of the drill hole. This ensures a fixation that is free from tensile force and pressure, thus guaranteeing a secure hold in solid and hollow building materials. The F-M is tested for fire resistance class R120, and offers safety for fire-protection-relevant applications. The F-M metal frame plug achieves fire resistance R 120. This allows for use in areas where fire resistance is relevant The operating principle prevents the window frame from being pulled against the substrate, and ensures a stress-free and long-lasting fixing of the frame The special plug geometry anchors the metal and plastic profiles against compressive and tensile loads, and allows for a secure hold of the window frame The cover caps (available separately) can be used to discreetly cover the screw heads Suitable for The F-M is suitable for push-through installation By tightening the screw, the cone is drawn into the sleeve and the fixing is expanded which wedges it inside the drill hole. The window frames are thus fixed in a stress-free manner The maximum installation torque is 5 Nm Building materials Concrete Vertically perforated brick Hollow blocks made from lightweight concrete Perforated sand-lime brick Solid sand-lime brick Aerated concrete Solid brick made from lightweight concrete Solid brick Application Window frames Door frames Squared timbers ds: dsc: kts: frame plug F 10 M 92 electrolytically galvanised steel kpn: 88672 kpn_dash: kpn_clear: 88672 bkpn: FISCHER 88672 bkpn_clear: FISCHER 88672 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 88672 sr_ns: FISCHER88672
r: 02046041 p: 0.51 pid: 21790 b: FISCHER q: 0 st: lt: 11 ean: 4006209886700 sr: FISCHER 88670 sr_no_br: 88670 sr_no_br_cl: 88670 sr_cl: FISCHER88670 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 10 mm Application General type (screw head) PZ3 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 72 mm n: FISCHER 88670 frame plug F 10 M 72 electrolytically galvanised steel cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The screw fixing with countersunk head for the stress-free installation of window and door frames. The fischer metal frame fixing F-M is a special plug for the stress-free, lasting stand-off installation of window and door frames and of squared timbers. It consists of a metal sleeve and a zinc-plated steel screw. The F-M is set in a time-saving push-through installation. When the screw is tightened, the cone is pulled into the plug sleeve and expands against the wall of the drill hole. This ensures a fixation that is free from tensile force and pressure, thus guaranteeing a secure hold in solid and hollow building materials. The F-M is tested for fire resistance class R120, and offers safety for fire-protection-relevant applications. The F-M metal frame plug achieves fire resistance R 120. This allows for use in areas where fire resistance is relevant The operating principle prevents the window frame from being pulled against the substrate, and ensures a stress-free and long-lasting fixing of the frame The special plug geometry anchors the metal and plastic profiles against compressive and tensile loads, and allows for a secure hold of the window frame The cover caps (available separately) can be used to discreetly cover the screw heads Suitable for The F-M is suitable for push-through installation By tightening the screw, the cone is drawn into the sleeve and the fixing is expanded which wedges it inside the drill hole. The window frames are thus fixed in a stress-free manner The maximum installation torque is 5 Nm Building materials Concrete Vertically perforated brick Hollow blocks made from lightweight concrete Perforated sand-lime brick Solid sand-lime brick Aerated concrete Solid brick made from lightweight concrete Solid brick Application Window frames Door frames Squared timbers ds: dsc: kts: frame plug F 10 M 72 electrolytically galvanised steel kpn: 88670 kpn_dash: kpn_clear: 88670 bkpn: FISCHER 88670 bkpn_clear: FISCHER 88670 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 88670 sr_ns: FISCHER88670
r: 02824746 p: 0.45 pid: 176007 b: FISCHER q: 0 st: lt: 8 ean: 4048962293340 sr: FISCHER 541908 sr_no_br: 541908 sr_no_br_cl: 541908 sr_cl: FISCHER541908 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 150 mm n: FISCHER 541908 clamping sleeve FNH 8 x 150 cn: CLAMPING SLEEVE cn2: CLAMPING SLEEVE cn_clear: CLAMPINGSLEEVE d: Product description The user-friendly spring sleeve for light fixings in solid building materials. The fischer nail sleeve FNH is a user-friendly spring sleeve made out of corrosion-resistant steel. The nail sleeve is driven into the through-type installation in a time-saving manner with the hammer, and expands along its whole length in the drill hole. This allows timber and metal sub-constructions, metal profiles, and squared timbers to be fixed in solid building materials in a cost-effective manner in interior areas and temporarily in external areas. Knock in with the hammer - finished Fixing without screws and plugs. This saves time and lowers costs No plugs or screws are required for the one-piece nail sleeve. This guarantees a simple and easy installation The geometry of the nail sleeve makes it easy to push it into the drill hole. This saves time and money Suitable for The FNH nail sleeve is suitable for push-through installation The nail sleeve is hammered in and expands its entire length in the hole FNH is suitable for interior applications and for temporary external fixings Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick Application Squared timbers Substructures made of wood and metal Metal profiles ds: dsc: kts: clamping sleeve FNH 8 x 150 kpn: 541908 kpn_dash: kpn_clear: 541908 bkpn: FISCHER 541908 bkpn_clear: FISCHER 541908 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Clamping sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer clamping sleeve sr_no_br_cl_ns: 541908 sr_ns: FISCHER541908
r: 87993064 p: 0.41 pid: 176397 b: FISCHER q: 0 st: lt: 8 ean: 4006209523902 sr: FISCHER 52390 sr_no_br: 52390 sr_no_br_cl: 52390 sr_cl: FISCHER52390 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter - mm Max. screw diameter 4,5 mm Application Construction board With screw Yes Wall plug type Plasterboard plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 22 mm n: FISCHER 52390 drywall plug GK S with screw cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The fastest installation in gypsum plasterboard. The fischer plasterboard fixing GK is made from high-quality nylon. The fixing is screwed in the pre-positioned installation with the enclosed setting tool flush to the surface and single and double-planked gypsum plasterboard. The spiral plug holds by creating a form fit. The compact design also allows installation in walls, where the panel thickness or the cavity behind the panel is unknown. The fischer GK can hold wood, sheet metal and chipboard screws from 4 to 5 mm thickness as well as different hooks and eye screws. Consequently, it is universally suitable for fixing e. g. pictures, lights and electrical installations securely and quickly. The included setting tool combines the drilling and fixing setting functions. It thus allows for a fast and simple installation The sharp, self-tapping thread of the GK enables a secure, positive fit fixing. This achieves a high load-bearing capacity The short fixing length means that only a small amount of space is required behind the board. As a result, the GK can also be used in the case of unknown board thickness and cavity depth The cross-drive recess in the head of the fixing means that the GK can also be screwed out like a screw without a setting tool The GK can be used with the most wide-ranging screws, hooks and eye screws. This allows for a broad range of applications Suitable for The gypsum plasterboard fixing GK is suitable for pre-positioned installation The GK is screwed flush into the gypsum plasterboard using the setting tool provided. Overtightening the fixing should be avoided. Therefore, the installation torque should be limited when using a battery operated screwdriver Adapted for wood, self-tapping and chipboard screws of 4. 0 to 5. 0 mm diameter For board thicknesses greater than 15 mm, drill a hole first by using the setting tool Not suitable for gypsum fibreboard and tiled plasterboard Building materials Gypsum plasterboard, single and double-planked Application Pictures Lighting Electrical installations Fitting accessories Series installations ds: dsc: kts: drywall plug GK S with screw kpn: 52390 kpn_dash: kpn_clear: 52390 bkpn: FISCHER 52390 bkpn_clear: FISCHER 52390 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 52390 sr_ns: FISCHER52390
r: 02824745 p: 0.37 pid: 176024 b: FISCHER q: 0 st: lt: 8 ean: 4048962293333 sr: FISCHER 541907 sr_no_br: 541907 sr_no_br_cl: 541907 sr_cl: FISCHER541907 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 130 mm n: FISCHER 541907 tension sleeve FNH 8 x 130 cn: CLAMPING SLEEVE cn2: CLAMPING SLEEVE cn_clear: CLAMPINGSLEEVE d: Product description The user-friendly spring sleeve for light fixings in solid building materials. The fischer nail sleeve FNH is a user-friendly spring sleeve made out of corrosion-resistant steel. The nail sleeve is driven into the through-type installation in a time-saving manner with the hammer, and expands along its whole length in the drill hole. This allows timber and metal sub-constructions, metal profiles, and squared timbers to be fixed in solid building materials in a cost-effective manner in interior areas and temporarily in external areas. Knock in with the hammer - finished Fixing without screws and plugs. This saves time and lowers costs No plugs or screws are required for the one-piece nail sleeve. This guarantees a simple and easy installation The geometry of the nail sleeve makes it easy to push it into the drill hole. This saves time and money Suitable for The FNH nail sleeve is suitable for push-through installation The nail sleeve is hammered in and expands its entire length in the hole FNH is suitable for interior applications and for temporary external fixings Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick Application Squared timbers Substructures made of wood and metal Metal profiles ds: dsc: kts: tension sleeve FNH 8 x 130 kpn: 541907 kpn_dash: kpn_clear: 541907 bkpn: FISCHER 541907 bkpn_clear: FISCHER 541907 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Clamping sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer clamping sleeve sr_no_br_cl_ns: 541907 sr_ns: FISCHER541907
r: 87990745 p: 0.36 pid: 176393 b: FISCHER q: 0 st: lt: 7 ean: 4006209789810 sr: FISCHER 78981 sr_no_br: 78981 sr_no_br_cl: 78981 sr_cl: FISCHER78981 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 28 mm Drill hole depth - mm Material (wall plug) Brass Wall plug type Brass plug With screw No With collar No Application Concrete type (screw head) Drilling diameter 10 mm n: FISCHER 78981 brass plug MS 8 x 28 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The brass expansion fixing with metric thread. The fischer brass fixing MS is an expansion plug made of brass for holding a metric thread. The special fixing is set in the pre-positioned installation. When driving in the screw or the threaded rod the brass fixing expands and anchors itself in the drill hole. Above all, the fischer brass fixing MS is suitable for fixing shelves, flow heaters, and aggregates in solid building materials. Fast installation due to compact design No rotation due to non-slip surface structure Flexibility due to using conventional screws and threaded rods Surface flush removal possible The compact design of the brass fixing reduces the amount of drilling required, helping to ensure a fast installation The special surface structure of the MS prevents the fixing from rotating in the drill hole. This provides increased installation safety The internal thread allows for the use of standard metric screws or threaded rods, and for surface flush removal and reuse of the fixing point. This provides great flexibility Suitable for The MS brass fixing is suitable for pre-positioned and push-through installation Turning in the metric screw causes the front part of the brass fixing to expand, thus securely anchoring it in the substrate Calculating screw length for flush fixing installation: Fixing length + fixture thickness = min. screw length Suitable for metric screws and threaded bolts The brass fixing may have to be expanded slightly before installation by turning in the threaded screw Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick Application Cellar shelves Substructures made of wood and metal Boilers Aggregates Control boxes Curtain rails ds: dsc: kts: brass plug MS 8 x 28 kpn: 78981 kpn_dash: kpn_clear: 78981 bkpn: FISCHER 78981 bkpn_clear: FISCHER 78981 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 78981 sr_ns: FISCHER78981
r: 87991033 p: 0.162 pid: 176403 b: FISCHER q: 0 st: lt: 6 ean: 4006209786604 sr: FISCHER 78660 sr_no_br: 78660 sr_no_br_cl: 78660 sr_cl: FISCHER78660 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 22 mm Drill hole depth 27 mm Material (wall plug) Brass Wall plug type Brass plug With screw No With collar No Application Concrete type (screw head) Drilling diameter 8 mm n: FISCHER 78660 brass plug MS 6 x 22 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The brass expansion fixing with metric thread. The fischer brass fixing MS is an expansion plug made of brass for holding a metric thread. The special fixing is set in the pre-positioned installation. When driving in the screw or the threaded rod the brass fixing expands and anchors itself in the drill hole. Above all, the fischer brass fixing MS is suitable for fixing shelves, flow heaters, and aggregates in solid building materials. Fast installation due to compact design No rotation due to non-slip surface structure Flexibility due to using conventional screws and threaded rods Surface flush removal possible The compact design of the brass fixing reduces the amount of drilling required, helping to ensure a fast installation The special surface structure of the MS prevents the fixing from rotating in the drill hole. This provides increased installation safety The internal thread allows for the use of standard metric screws or threaded rods, and for surface flush removal and reuse of the fixing point. This provides great flexibility Suitable for The MS brass fixing is suitable for pre-positioned and push-through installation Turning in the metric screw causes the front part of the brass fixing to expand, thus securely anchoring it in the substrate Calculating screw length for flush fixing installation: Fixing length + fixture thickness = min. screw length Suitable for metric screws and threaded bolts The brass fixing may have to be expanded slightly before installation by turning in the threaded screw Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick Application Cellar shelves Substructures made of wood and metal Boilers Aggregates Control boxes Curtain rails ds: dsc: kts: brass plug MS 6 x 22 kpn: 78660 kpn_dash: kpn_clear: 78660 bkpn: FISCHER 78660 bkpn_clear: FISCHER 78660 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 78660 sr_ns: FISCHER78660
r: 02135148 p: 0.159 pid: 176200 b: FISCHER q: 200 st: 1 lt: 1 ean: 4006209523896 sr: FISCHER 52389 sr_no_br: 52389 sr_no_br_cl: 52389 sr_cl: FISCHER52389 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter - mm Max. screw diameter 4,5 mm type (screw head) Application Construction board With screw No Wall plug type Plasterboard plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 22 mm n: FISCHER 52389 drywall screw GK cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The fastest installation in gypsum plasterboard. The fischer plasterboard fixing GK is made from high-quality nylon. The fixing is screwed in the pre-positioned installation with the enclosed setting tool flush to the surface and single and double-planked gypsum plasterboard. The spiral plug holds by creating a form fit. The compact design also allows installation in walls, where the panel thickness or the cavity behind the panel is unknown. The fischer GK can hold wood, sheet metal and chipboard screws from 4 to 5 mm thickness as well as different hooks and eye screws. Consequently, it is universally suitable for fixing e. g. pictures, lights and electrical installations securely and quickly. The included setting tool combines the drilling and fixing setting functions. It thus allows for a fast and simple installation The sharp, self-tapping thread of the GK enables a secure, positive fit fixing. This achieves a high load-bearing capacity The short fixing length means that only a small amount of space is required behind the board. As a result, the GK can also be used in the case of unknown board thickness and cavity depth The cross-drive recess in the head of the fixing means that the GK can also be screwed out like a screw without a setting tool The GK can be used with the most wide-ranging screws, hooks and eye screws. This allows for a broad range of applications Suitable for The gypsum plasterboard fixing GK is suitable for pre-positioned installation The GK is screwed flush into the gypsum plasterboard using the setting tool provided. Overtightening the fixing should be avoided. Therefore, the installation torque should be limited when using a battery operated screwdriver Adapted for wood, self-tapping and chipboard screws of 4. 0 to 5. 0 mm diameter For board thicknesses greater than 15 mm, drill a hole first by using the setting tool Not suitable for gypsum fibreboard and tiled plasterboard Building materials Gypsum plasterboard, single and double-planked Application Pictures Lighting Electrical installations Fitting accessories Series installations ds: dsc: kts: drywall screw GK kpn: 52389 kpn_dash: kpn_clear: 52389 bkpn: FISCHER 52389 bkpn_clear: FISCHER 52389 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 52389 sr_ns: FISCHER52389
r: 03202164 p: 0.158 pid: 176106 b: FISCHER q: 0 st: lt: 12 ean: 4048962128192 sr: FISCHER 513702 sr_no_br: 513702 sr_no_br_cl: 513702 sr_cl: FISCHER513702 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 8 mm Application General With collar Yes type (screw head) PZ3 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 80 mm n: FISCHER 513702 nail plug N 8 x 80/40 F with flat head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The hammer-in plug with flat head for simple, fast and economic installation. The fischer Hammerfix N-F with flat head consists of a high-quality nylon plug and a zinc-plated nail screw. These are already pre-fitted for quick assembly. The Hammerfix is led through the component in the time-saving through-type installation. When driving in the nail screw, the fixing sleeve expands and anchors itself securely in the building material. The fischer Hammerfix N-F with flat head is ideal for fixing metal constructions in all building materials in internal areas. Fast Hammerset installation saves time: ideal for series installation Simple and secure installation: Integrated hammer-in stop prevents premature anchor spreading Subsequent dismantling of the nail screw with a cross-slot recess is possible With flat head for metal constructions The rapid hammerset installation reduces the amount of time required and allows for an economic series installation The integrated hammer-in stop prevents the plug from expanding prematurely (jamming), thus enabling a problem-free installation Together with the cross-slot recess, the thread of the nail screw allows the screw to be removed, thus allowing for subsequent dismantling The wide range of diameters and usage lengths provides the correct plug for every fixing Suitable for Suitable for push-through installation When hammered in, the nail screw causes the plug to expand in two directions, thus providing a secure anchoring in the building material Countersunk head plugs are recommended for the installation of timber constructions; in the case of metal constructions, use flat-head plugs, and use pan-head plugs for long holes Building materials Concrete Solid sand-lime brick Building brick Natural stone Solid brick made from lightweight concrete Aerated concrete Solid panel made from gypsum Application Metal constructions ds: dsc: kts: nail plug N 8 x 80/40 F with flat head kpn: 513702 kpn_dash: kpn_clear: 513702 bkpn: FISCHER 513702 bkpn_clear: FISCHER 513702 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 513702 sr_ns: FISCHER513702
r: 03189575 p: 0.144 pid: 176137 b: FISCHER q: 0 st: lt: 13 ean: 4006209264256 sr: FISCHER 26425 sr_no_br: 26425 sr_no_br_cl: 26425 sr_cl: FISCHER26425 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 18 mm Drill hole depth 25 mm Material (wall plug) Brass Wall plug type Brass plug With screw No With collar Yes Application Concrete type (screw head) Thread designation M5 Drilling diameter 6 mm n: FISCHER 26425 brass plug MS 5 x 18 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The brass expansion fixing with metric thread. The fischer brass fixing MS is an expansion plug made of brass for holding a metric thread. The special fixing is set in the pre-positioned installation. When driving in the screw or the threaded rod the brass fixing expands and anchors itself in the drill hole. Above all, the fischer brass fixing MS is suitable for fixing shelves, flow heaters, and aggregates in solid building materials. Fast installation due to compact design No rotation due to non-slip surface structure Flexibility due to using conventional screws and threaded rods Surface flush removal possible The compact design of the brass fixing reduces the amount of drilling required, helping to ensure a fast installation The special surface structure of the MS prevents the fixing from rotating in the drill hole. This provides increased installation safety The internal thread allows for the use of standard metric screws or threaded rods, and for surface flush removal and reuse of the fixing point. This provides great flexibility Suitable for The MS brass fixing is suitable for pre-positioned and push-through installation Turning in the metric screw causes the front part of the brass fixing to expand, thus securely anchoring it in the substrate Calculating screw length for flush fixing installation: Fixing length + fixture thickness = min. screw length Suitable for metric screws and threaded bolts The brass fixing may have to be expanded slightly before installation by turning in the threaded screw Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick Application Cellar shelves Substructures made of wood and metal Boilers Aggregates Control boxes Curtain rails ds: dsc: kts: brass plug MS 5 x 18 kpn: 26425 kpn_dash: kpn_clear: 26425 bkpn: FISCHER 26425 bkpn_clear: FISCHER 26425 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 26425 sr_ns: FISCHER26425
r: 02824733 p: 0.134 pid: 176019 b: FISCHER q: 0 st: lt: 4 ean: 4048962293302 sr: FISCHER 541899 sr_no_br: 541899 sr_no_br_cl: 541899 sr_cl: FISCHER541899 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm n: FISCHER 541899 clamping sleeve FNH 8 x 70 cn: CLAMPING SLEEVE cn2: CLAMPING SLEEVE cn_clear: CLAMPINGSLEEVE d: Product description The user-friendly spring sleeve for light fixings in solid building materials. The fischer nail sleeve FNH is a user-friendly spring sleeve made out of corrosion-resistant steel. The nail sleeve is driven into the through-type installation in a time-saving manner with the hammer, and expands along its whole length in the drill hole. This allows timber and metal sub-constructions, metal profiles, and squared timbers to be fixed in solid building materials in a cost-effective manner in interior areas and temporarily in external areas. Knock in with the hammer - finished Fixing without screws and plugs. This saves time and lowers costs No plugs or screws are required for the one-piece nail sleeve. This guarantees a simple and easy installation The geometry of the nail sleeve makes it easy to push it into the drill hole. This saves time and money Suitable for The FNH nail sleeve is suitable for push-through installation The nail sleeve is hammered in and expands its entire length in the hole FNH is suitable for interior applications and for temporary external fixings Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick Application Squared timbers Substructures made of wood and metal Metal profiles ds: dsc: kts: clamping sleeve FNH 8 x 70 kpn: 541899 kpn_dash: kpn_clear: 541899 bkpn: FISCHER 541899 bkpn_clear: FISCHER 541899 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Clamping sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer clamping sleeve sr_no_br_cl_ns: 541899 sr_ns: FISCHER541899
r: 02824736 p: 0.133 pid: 176004 b: FISCHER q: 1150 st: 1 lt: 1 ean: 4048962293319 sr: FISCHER 541905 sr_no_br: 541905 sr_no_br_cl: 541905 sr_cl: FISCHER541905 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 90 mm n: FISCHER 541905 clamping sleeve FNH 8 x 90 cn: CLAMPING SLEEVE cn2: CLAMPING SLEEVE cn_clear: CLAMPINGSLEEVE d: Product description The user-friendly spring sleeve for light fixings in solid building materials. The fischer nail sleeve FNH is a user-friendly spring sleeve made out of corrosion-resistant steel. The nail sleeve is driven into the through-type installation in a time-saving manner with the hammer, and expands along its whole length in the drill hole. This allows timber and metal sub-constructions, metal profiles, and squared timbers to be fixed in solid building materials in a cost-effective manner in interior areas and temporarily in external areas. Knock in with the hammer - finished Fixing without screws and plugs. This saves time and lowers costs No plugs or screws are required for the one-piece nail sleeve. This guarantees a simple and easy installation The geometry of the nail sleeve makes it easy to push it into the drill hole. This saves time and money Suitable for The FNH nail sleeve is suitable for push-through installation The nail sleeve is hammered in and expands its entire length in the hole FNH is suitable for interior applications and for temporary external fixings Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick Application Squared timbers Substructures made of wood and metal Metal profiles ds: dsc: kts: clamping sleeve FNH 8 x 90 kpn: 541905 kpn_dash: kpn_clear: 541905 bkpn: FISCHER 541905 bkpn_clear: FISCHER 541905 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Clamping sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer clamping sleeve sr_no_br_cl_ns: 541905 sr_ns: FISCHER541905
r: 22065262 p: 0.131 pid: 176384 b: FISCHER q: 0 st: lt: 13 ean: 4006209264249 sr: FISCHER 26424 sr_no_br: 26424 sr_no_br_cl: 26424 sr_cl: FISCHER26424 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) 4 mm Length (Wall plug) 15 mm Drill hole depth 20 mm Material (wall plug) Brass Wall plug type Brass plug With screw No With collar No Application Concrete type (screw head) Drilling diameter 5 mm n: FISCHER 26424 brass plug MS 4 x 15 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The brass expansion fixing with metric thread. The fischer brass fixing MS is an expansion plug made of brass for holding a metric thread. The special fixing is set in the pre-positioned installation. When driving in the screw or the threaded rod the brass fixing expands and anchors itself in the drill hole. Above all, the fischer brass fixing MS is suitable for fixing shelves, flow heaters, and aggregates in solid building materials. Fast installation due to compact design No rotation due to non-slip surface structure Flexibility due to using conventional screws and threaded rods Surface flush removal possible The compact design of the brass fixing reduces the amount of drilling required, helping to ensure a fast installation The special surface structure of the MS prevents the fixing from rotating in the drill hole. This provides increased installation safety The internal thread allows for the use of standard metric screws or threaded rods, and for surface flush removal and reuse of the fixing point. This provides great flexibility Suitable for The MS brass fixing is suitable for pre-positioned and push-through installation Turning in the metric screw causes the front part of the brass fixing to expand, thus securely anchoring it in the substrate Calculating screw length for flush fixing installation: Fixing length + fixture thickness = min. screw length Suitable for metric screws and threaded bolts The brass fixing may have to be expanded slightly before installation by turning in the threaded screw Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick Application Cellar shelves Substructures made of wood and metal Boilers Aggregates Control boxes Curtain rails ds: dsc: kts: brass plug MS 4 x 15 kpn: 26424 kpn_dash: kpn_clear: 26424 bkpn: FISCHER 26424 bkpn_clear: FISCHER 26424 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 26424 sr_ns: FISCHER26424
r: 03202173 p: 0.131 pid: 176115 b: FISCHER q: 0 st: lt: 8 ean: 4048962131277 sr: FISCHER 513842 sr_no_br: 513842 sr_no_br_cl: 513842 sr_cl: FISCHER513842 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 6 mm Application General With collar Yes type (screw head) PZ2 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 80 mm n: FISCHER 513842 nail plug N 6 x 80/50 F with flat head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The hammer-in plug with flat head for simple, fast and economic installation. The fischer Hammerfix N-F with flat head consists of a high-quality nylon plug and a zinc-plated nail screw. These are already pre-fitted for quick assembly. The Hammerfix is led through the component in the time-saving through-type installation. When driving in the nail screw, the fixing sleeve expands and anchors itself securely in the building material. The fischer Hammerfix N-F with flat head is ideal for fixing metal constructions in all building materials in internal areas. Fast Hammerset installation saves time: ideal for series installation Simple and secure installation: Integrated hammer-in stop prevents premature anchor spreading Subsequent dismantling of the nail screw with a cross-slot recess is possible With flat head for metal constructions The rapid hammerset installation reduces the amount of time required and allows for an economic series installation The integrated hammer-in stop prevents the plug from expanding prematurely (jamming), thus enabling a problem-free installation Together with the cross-slot recess, the thread of the nail screw allows the screw to be removed, thus allowing for subsequent dismantling The wide range of diameters and usage lengths provides the correct plug for every fixing Suitable for Suitable for push-through installation When hammered in, the nail screw causes the plug to expand in two directions, thus providing a secure anchoring in the building material Countersunk head plugs are recommended for the installation of timber constructions; in the case of metal constructions, use flat-head plugs, and use pan-head plugs for long holes Building materials Concrete Solid sand-lime brick Building brick Natural stone Solid brick made from lightweight concrete Aerated concrete Solid panel made from gypsum Application Metal constructions ds: dsc: kts: nail plug N 6 x 80/50 F with flat head kpn: 513842 kpn_dash: kpn_clear: 513842 bkpn: FISCHER 513842 bkpn_clear: FISCHER 513842 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 513842 sr_ns: FISCHER513842
r: 03157436 p: 0.109 pid: 176107 b: FISCHER q: 0 st: lt: 8 ean: 4048962131260 sr: FISCHER 513841 sr_no_br: 513841 sr_no_br_cl: 513841 sr_cl: FISCHER513841 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 6 mm Length (Wall plug) 60 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) PZ2 n: FISCHER 513841 nail plug N 6 x 60/30 F with flat head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The hammer-in plug with flat head for simple, fast and economic installation. The fischer Hammerfix N-F with flat head consists of a high-quality nylon plug and a zinc-plated nail screw. These are already pre-fitted for quick assembly. The Hammerfix is led through the component in the time-saving through-type installation. When driving in the nail screw, the fixing sleeve expands and anchors itself securely in the building material. The fischer Hammerfix N-F with flat head is ideal for fixing metal constructions in all building materials in internal areas. Fast Hammerset installation saves time: ideal for series installation Simple and secure installation: Integrated hammer-in stop prevents premature anchor spreading Subsequent dismantling of the nail screw with a cross-slot recess is possible With flat head for metal constructions The rapid hammerset installation reduces the amount of time required and allows for an economic series installation The integrated hammer-in stop prevents the plug from expanding prematurely (jamming), thus enabling a problem-free installation Together with the cross-slot recess, the thread of the nail screw allows the screw to be removed, thus allowing for subsequent dismantling The wide range of diameters and usage lengths provides the correct plug for every fixing Suitable for Suitable for push-through installation When hammered in, the nail screw causes the plug to expand in two directions, thus providing a secure anchoring in the building material Countersunk head plugs are recommended for the installation of timber constructions; in the case of metal constructions, use flat-head plugs, and use pan-head plugs for long holes Building materials Concrete Solid sand-lime brick Building brick Natural stone Solid brick made from lightweight concrete Aerated concrete Solid panel made from gypsum Application Metal constructions ds: dsc: kts: nail plug N 6 x 60/30 F with flat head kpn: 513841 kpn_dash: kpn_clear: 513841 bkpn: FISCHER 513841 bkpn_clear: FISCHER 513841 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 513841 sr_ns: FISCHER513841
r: 08134110 p: 0.108 pid: 176345 b: FISCHER q: 0 st: lt: 8 ean: 4048962295030 sr: FISCHER 542106 sr_no_br: 542106 sr_no_br_cl: 542106 sr_cl: FISCHER542106 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Length (Wall plug) 35 mm Drill hole depth 40 mm Material (wall plug) Plastic Wall plug type Hammer-in plug With screw No With collar Yes Application Reinforced concrete type (screw head) n: FISCHER 542106 rodforce FGD 10 M6 x 35 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The economic hammer plug - quick and easy insertion of metric threaded ends Innovative design allows quick and time-saving installation - without special tools. Short plug length prevents hitting reinforcement in reinforced concrete. The toothing on the inside corresponds to the pitch of the metric thread, ensuring a firm and solid connection. The plug's collar guarantees correct mounting. Easy to check and adjust: Check the anchoring depth with the plug's closed tip. The innovative design allows quick and easy mounting of the threaded rod. The short plug length prevents hitting rebar during assembly. The toothing on the inside allows the use of common metric threaded ends, threaded pins and bolts. This eliminates the need to stock a wide range of products. Assembly without special tools, a hammer is sufficient. The collar of the plug functions as a visual check. If it lies flush with the surface, the plug is correctly inserted. Easy to adjust: the tip of the plug can be punched through, allowing the threaded rod to be inserted deeper. The RodForce FGD is an economical choice for fixing metric threaded ends in solid substrates. The threaded end and nylon plug are easily and quickly inserted with a few hammer blows. The short plug length prevents hitting rebar and reduces drilling time. The closed tip indicates the anchoring depth, but the threaded rod can also be hammered through the tip to set the protruding thread. Applications Hanging of individual pipes Sanitary and heating fixings Cable and pipe fixings Ceiling light Brackets Mounting rails Building materials Concrete Solid sand-lime brick Solid brick ds: dsc: kts: rodforce FGD 10 M6 x 35 kpn: 542106 kpn_dash: kpn_clear: 542106 bkpn: FISCHER 542106 bkpn_clear: FISCHER 542106 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 542106 sr_ns: FISCHER542106
r: 02203091 p: 0.081 pid: 176199 b: FISCHER q: 0 st: lt: 8 ean: 4006209159033 sr: FISCHER 15903 sr_no_br: 15903 sr_no_br_cl: 15903 sr_cl: FISCHER15903 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 8 mm Length (Wall plug) 40 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Hammer-in plug With screw Yes With collar Yes Application Concrete type (screw head) PZ3 n: FISCHER 15903 nail plug N 8 x 40/1 P with collar cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The impact plug with large collar for easy and quick assembly. The fischer Nail Plug N 8 × 40/1 P with collar consists of a plug made of high-quality nylon and a nail screw made of galvanised or stainless steel, pre-assembled for fast assembly. For push-through mounting, the plug with mounting piece is hammered in; the nail screw spreads the sleeve open and anchors firmly in the building material. Fast impact mounting, ideal for series mounting Integrated impact lock prevents premature spreading Removable nail screw with cross head attachment offers flexibility Large choice of diameters and lengths Suitable for Metal corners Metal stud profiles Building materials Concrete Solid sand-lime brick Solid brick Natural stone Solid lightweight concrete bricks Aerated concrete Gypsum blocks Technical data Drilling diameter: 8 mm Effective anchoring depth: 40 mm Plug length: 40 mm Minimum hole depth for through-hole mounting: 55 mm Maximum attachment thickness: 1 mm Intake:PZ3 Packaging: box, 50 pieces ds: dsc: kts: nail plug N 8 x 40/1 P with collar kpn: 15903 kpn_dash: kpn_clear: 15903 bkpn: FISCHER 15903 bkpn_clear: FISCHER 15903 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 15903 sr_ns: FISCHER15903
