r: 87990457 p: 3.67 pid: 176419 b: FISCHER q: 0 st: lt: 8 ean: 4006209502648 sr: FISCHER 50264 sr_no_br: 50264 sr_no_br_cl: 50264 sr_cl: FISCHER50264 sr_dash: sold: 110.1 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Drilling diameter 12 mm Length 130 mm Material Stainless steel Width across flats 17 mm n: FISCHER 50264 anchor rod RG M10 x 130 R stainless steel cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The fischer anchor rod with roof point and external hexagonal socket for both injection mortars and glass capsules In combination with the various mortar patterns or injection mortars approved for anchoring in cracked and uncracked concrete, solid stone masonry, porous stone masonry and aerated concrete. Threaded rods with chamfered edge and 6-sided for easy mounting with pre-portioned glass capsule. Stainless steel for outdoor use. The anchor rod RG M is made of stainless steel. The anchor rod is a system accessory for the various mortar patterns or injection mortar. For individual fixings, the use of the pre-portioned mortar cartridges is particularly efficient. When mounting with the mortar cartridge, the RG M anchor rod is inserted using a rotary-tapping hammer. During installation, the mortar cartridge is broken, mixed and the mortar mass activated. During installation with the injection mortar, the anchor rod is manually pushed into the borehole by means of slight twisting movements. The system is particularly suitable for efficient fixing of machinery, steel structures and support legs outdoors. Applications Anchors with Chemical Capsule RSB and RSB mini Anchors with chemical capsule RM II Anchors with injection mortars FIS SB, FIS EM Plus, FIS V and FIS V Plus Building materials In connection with fischer glass capsules approved or suitable for cracked and uncracked concrete. In connection with various fischer injection mortars approved or suitable for different building materials. ds: dsc: kts: anchor rod RG M10 x 130 R stainless steel kpn: 50264 kpn_dash: kpn_clear: 50264 bkpn: FISCHER 50264 bkpn_clear: FISCHER 50264 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 50264 sr_ns: FISCHER50264
r: 02019405 p: 0.54 pid: 11060 b: FISCHER q: 0 st: lt: 5 ean: 4006209483237 sr: FISCHER 48323 sr_no_br: 48323 sr_no_br_cl: 48323 sr_cl: FISCHER48323 sr_dash: sold: 108 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Drilling diameter 10 mm n: FISCHER EA II M8x40 weft anchor zinc plated - 48323 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The internally threaded anchor with a rim for simple Hammerset installation. The fischer Hammerset anchor EA II is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II is ideal for fixing sprinkler systems, gratings, and consoles in internal areas with approval. Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve Use of standard metric screws and threaded rods lowers complexity Power-saving series installation with machine setting tool EA II S-SDS Visual control due to embossing ETA approval for non-cracked concrete and multiple fixings The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use The EMS machine setting tool allows for effortless installation, particularly in the case of series installations The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded The black fixing point prevents the anchor from falling out of the drill hole during overhead installation Suitable for The EA II is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall The setting tools must sit on the rim of the anchor to ensure correct expansion Building materials Approved for: Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Pipelines and ventilation ducts Sprinkler systems Cable conduits and wires Gratings Steel constructions Machines Consoles Shuttering props ds: dsc: kts: weft anchor zinc plated kpn: EA II M8x40 kpn_dash: kpn_clear: EAIIM8x40 bkpn: FISCHER EA II M8x40 bkpn_clear: FISCHER EAIIM8x40 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 48323 sr_ns: FISCHER48323
r: 02907496 p: 0.36 pid: 176103 b: FISCHER q: 0 st: lt: 6 ean: 4048962265910 sr: FISCHER 538746 sr_no_br: 538746 sr_no_br_cl: 538746 sr_cl: FISCHER538746 sr_dash: sold: 108 p_range: none type: standard act: 1 avo: 1 av: Material Polypropylene For Mounting rail Color Black n: FISCHER 538746 cover cap AK 17 cn: COVER CAP cn2: COVER CAP cn_clear: COVERCAP d: Product description The cover cap for flush protection that matches the FLS profile sizes The fischer cover cap AK forms the closure at the ends of the channel FLS and the cantilever arm ALK. The cover cap protects against injuries and finishes the profile off optically. The cover cap AK is offered in black polypropylene to complement the three profile sizes of the mounting rails FLS. For profile 17/1. 0 Colour: Black Suitable for channel FLS 17, FLS 30 and FLS 37 and cantilever arms ALK Application Closing for channel FLS and cantilever arms ALK ds: dsc: kts: cover cap AK 17 kpn: 538746 kpn_dash: kpn_clear: 538746 bkpn: FISCHER 538746 bkpn_clear: FISCHER 538746 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Cover cap | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer cover cap sr_no_br_cl_ns: 538746 sr_ns: FISCHER538746
r: 87051395 p: 2.09 pid: 16046 b: FISCHER q: 0 st: lt: 8 ean: 4048962016765 sr: FISCHER 503136 sr_no_br: 503136 sr_no_br_cl: 503136 sr_cl: FISCHER503136 sr_dash: sold: 104.5 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 65 mm Safety anchor Yes Drilling diameter 10 mm n: FISCHER FH II 10/15 SK safety anchor with countersunk head electrolytically galvanised - 503136 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with countersunk head in cracked concrete. The fischer high-performance anchor FH II SK with countersunk head is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II SK with countersunk head is ideally suited to fix railings, staircases, and ladders in cracked and non-cracked concrete. With countersunk head for assembly that is flush to the surface The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2) The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2) The countersunk finished screw head allows for flush-mounted fixing The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required The optimised geometry intelligently reduces the energy required for assembly The approval regulates the use of hollow drills Suitable for The FH II is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base Available head shapes for flexible design solutions:Countersunk head (type SK), hexagon head (type S), bolt version with nut and washer (type B) and cap nut (type H) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Guard rails Staircases Consoles Steel constructions Ladders Cable trays Machines Gates Façades Gratings ds: dsc: kts: safety anchor with countersunk head electrolytically galvanised kpn: FH II 10/15 SK kpn_dash: kpn_clear: FHII1015SK bkpn: FISCHER FH II 10/15 SK bkpn_clear: FISCHER FHII1015SK c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 503136 sr_ns: FISCHER503136
r: 02867940 p: 10.39 pid: 175985 b: FISCHER q: 0 st: lt: 15 ean: 4048962265262 sr: FISCHER 538665 sr_no_br: 538665 sr_no_br_cl: 538665 sr_cl: FISCHER538665 sr_dash: sold: 103.9 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 538665 Saddle flange SF Clix 31 premounted cn: SADDLE FLANGE cn2: SADDLE FLANGE cn_clear: SADDLEFLANGE d: Product description The pre-assembled saddle flange SF Clix 31 The pre-mounted fischer construction element saddle flange SF Clix 31 securely connects the mounting rails FLS with the substrate at an angle of 90°. The pre-mounted element saves time and costs. The fastener in the SF Clix and the precise saddle enable a safe and secure installation. The stable base plate of the SF Clix 90° with slots at 90° makes fixing to the substrate with plugs or anchors easier. The galvanised zinc version is suitable for installation in buildings. Easy creation of rail constructions in conjunction with FLS channels Time-saving assembly due to pre-assembled fastening element Corrosion protection suitable for the application due to galvanisation For use in dry interior areas Pre-assembled accessories like SF Clix bring the number of articles for a connection down and guarantee a time-saving installation The pre-assembled connector of the SF Clix secures the installation position due to the unique thrust block and guarantees a safe and fast installation The special spring leg at pre-assembled connector guarantees the necessary contact pressure of the connector to the channel to help for a secure adjustment during installation The perfect-fit saddle of the SF allows an simple installation by inserting the channel The saddle flange's stable design offers a secure hold for a load-bearing construction Application Element for the stable construction of connections between channels and building structures For use in dry interior areas ds: dsc: kts: Saddle flange SF Clix 31 premounted kpn: 538665 kpn_dash: kpn_clear: 538665 bkpn: FISCHER 538665 bkpn_clear: FISCHER 538665 c_path: Home / Fasteners and machine components / Fasteners / Rails and mounting / Saddle flange | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer rails and mounting / Fischer saddle flange sr_no_br_cl_ns: 538665 sr_ns: FISCHER538665
r: 87030002 p: 0.019 pid: 74013 b: FISCHER q: 700 st: 1 lt: 1 ean: 4006209501054 sr: FISCHER 50105 sr_no_br: 50105 sr_no_br_cl: 50105 sr_cl: FISCHER50105 sr_dash: sold: 102.6 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 5 mm Max. screw diameter 4 mm type (screw head) Application General With screw No Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 35 mm Length (Wall plug) 25 mm n: FISCHER 50105 plug S 5 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The installation-friendly nylon plug with 2-way expansion. The fischer expansion plug S is the original and the proven classic millions of times for decades. The plastic fixing is made entirely from high-quality nylon. As a result, the plug is particularly robust during installation and guarantees permanent security. As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This prevents the building material from spalling due to fixings close to the edge. Wood or chipboard screws can be used to fix the object. The fischer expansion plug S is ideal for fixing in concrete and solid masonry. The rimless plug is suitable for pre-positioned and push-through installation Simple insertion due to the ease of pushing in the plug The anti-rotation lock prevents rotation in the drill hole. This guarantees a high degree of safety during installation The rimless plug sleeve allows for the plug to be set as deep as required below the plaster to the bearing substrate to achieve the maximum load-bearing capacity As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This allows for smaller edge distances The slimline plug geometry makes it easy to push the plug into the drill hole. For a fast and simple installation The anti-rotation lock prevents the plug rotating in the drill hole, thus guaranteeing a high level of installation safety Suitable for The expansion plug S is suitable for pre-positioned and push-through installation When turning in the screw, the expansion plug S expands in two directions, thus providing a secure anchoring in the building material The required screw length is given by the plug length + plaster and/or insulation material thickness + fixture thickness + 1 x screw diameter Suitable for wood and chipboard screws The edge distance must be at least one plug length For installations close to the edge, turn the plug so that the expansion force acts parallel to the edge Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick made from lightweight concrete Solid brick Application Pictures Lighting Skirting Light shelves Mirror cabinets Letter boxes Motion detectors Information boards Curtain rails Electrical installations ds: dsc: kts: plug S 5 kpn: 50105 kpn_dash: kpn_clear: 50105 bkpn: FISCHER 50105 bkpn_clear: FISCHER 50105 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 50105 sr_ns: FISCHER50105
r: 02776755 p: 1.02 pid: 22090 b: FISCHER q: 0 st: lt: 8 ean: 4048962251418 sr: FISCHER 536858 sr_no_br: 536858 sr_no_br_cl: 536858 sr_cl: FISCHER536858 sr_dash: sold: 102 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Length 60 mm Max. useful length 5 mm n: FISCHER 536858 concrete screw FBS II 10x60 5/- hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 10x60 5/- hexagon head kpn: 536858 kpn_dash: kpn_clear: 536858 bkpn: FISCHER 536858 bkpn_clear: FISCHER 536858 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536858 sr_ns: FISCHER536858
r: 08134146 p: 0.5 pid: 176421 b: FISCHER q: 0 st: lt: 8 ean: 4048962428360 sr: FISCHER 558882 sr_no_br: 558882 sr_no_br_cl: 558882 sr_cl: FISCHER558882 sr_dash: sold: 100 p_range: none type: standard act: 1 avo: 1 av: Length 120 mm type (screw head) T25 Drive type Torx Material Steel Surface treatment Zinc plated Number per box 100 n: FISCHER 558882 set screw FAFS 5 x 120 TX25 cn: STAND-OFF SCREW cn2: STAND-OFF SCREW cn_clear: STANDOFFSCREW d: Product description The spacer screw with stepless adjustability The special operating principle allows infinitely variable adjustment. The attachment can be aligned very precisely. The clip does not rotate during adjustment. The screw head retains its position in the attachment, flush mounting is guaranteed. The PowerFast II engages very quickly in wood, improving processing speed. In addition, the FPF II is also suitable for use in dowels. The thread on the clip allows unscrewing the attachment, which facilitates dismantling. Fischer FAFS set screws are problem solvers for the stepless setting of timber structures or window frames. The special long crown bit turns the screw through the attachment until it is flush with the surface. After removing the crown, the attachment can be adjusted by turning the screw further in or out. The set screw is ideal for fastening and adjusting window frames and railing work on wooden substrates, in masonry or concrete the FAFS can be used in combination with a DuoPower 6x50.A special bit is required for fitting and adjusting the FAFS, which can be ordered separately under article number 558883. Applications Wooden substructures Door frames Window frames Rachelwerk Building materials Wood and wood-based materials ds: dsc: kts: set screw FAFS 5 x 120 TX25 kpn: 558882 kpn_dash: kpn_clear: 558882 bkpn: FISCHER 558882 bkpn_clear: FISCHER 558882 c_path: Home / Fasteners and machine components / Fasteners / Screws / Stand-off screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer stand-off screw sr_no_br_cl_ns: 558882 sr_ns: FISCHER558882
r: 87992989 p: 0.5 pid: 74977 b: FISCHER q: 0 st: lt: 4 ean: 4048962164855 sr: FISCHER 519772 sr_no_br: 519772 sr_no_br_cl: 519772 sr_cl: FISCHER519772 sr_dash: sold: 100 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Thread designation M5 Application Construction board With screw Yes Wall plug type Cavity wall plug Material (wall plug) Polyamide (Nylon®) Drill hole depth 45 mm Length (Wall plug) 37 mm n: FISCHER 519772 Metal hollow wall plug HM 5 x 37 S with metric screw cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile metal cavity fixing with metric screw. The fischer cavity metal anchor HM-S is a versatile cavity fixing with a metric screw for all panel building materials. The fixing is set with the fischer installation pliers HM-Z 1 in the pre-positioned installation. The fixing is pulled in the cavity against the board building material with the pliers. In this case, the expanding arms swing open and press onto the reverse side of the board. Alternatively, assembly can be carried out either with a screwdriver or a cordless screwdriver. The cavity metal anchor HM-S is suitable for fixing lights, towel rails, and curtain rails. Removal and installation of the attachment can be repeated without reducing load-carrying properties. This increases flexibility High load capacity due to the large supporting surface provided by the expansion arms Turning lock for convenient assembly: Claws on the edge of the fixing secure the fixing in board building material Suitable for pre-positioned installation Complete with metric screw Due to the extensive range, the HM is suitable for board building materials with a thickness of 3-50 mm and thus suitable for a number of different applications The metric internal thread allows the attachment to be removed and refitted several times, thus offering the best possible flexibility The HM's expanding arms ensure a large supporting surface, thus allowing a high load-bearing capacity The claws around the edge of the fixing penetrate the board building material, preventing the fixing from rotating, thus ensuring a secure installation Suitable for The metal cavity fixing HM is suitable for pre-positioned installation The fixing should be selected based on the thickness of the board building material, to allow the very best expansion in the cavity During installation, the expanding arms swing open and press onto the reverse side of the board The HM can be installed using installation pliers. If using a battery operated screwdriver or screwdriver for installation, the pre-assembled screws must be removed first. When screwing in and expanding the fixing, the attachment, or a max. 6 mm plate, needs to be used as a turning stop Building materials Gypsum plasterboard and gypsum fibreboards Cavity floor slabs Light building boards made of wood wool Chipboard Plywood boards Application Pictures Lighting Light shelves Towel rails Mirror cabinets Curtain rails Sub-structures ds: dsc: kts: Metal hollow wall plug HM 5 x 37 S with metric screw kpn: 519772 kpn_dash: kpn_clear: 519772 bkpn: FISCHER 519772 bkpn_clear: FISCHER 519772 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 519772 sr_ns: FISCHER519772
r: 03308135 p: 0.08 pid: 176218 b: FISCHER q: 4850 st: 1 lt: 1 ean: 4048962480849 sr: FISCHER 568010 sr_no_br: 568010 sr_no_br_cl: 568010 sr_cl: FISCHER568010 sr_dash: sold: 100 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw No Drilling diameter 10 mm type (screw head) Application General Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 70 mm Length (Wall plug) 50 mm n: FISCHER 568010 plug SX Plus 10 x 50 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The specialist for solid building materials. Thanks to its 4-way expansion, the fischer SX Plus expansion plug is the specialist for solid building materials such as concrete, sand-lime brick and masonry. The special fixing blades ensure pre-fixation of the screw, which means that it does not have to be additionally held in place for overhead applications. This screw fixation allows the user a flexible and comfortable setting process. The flexibel plug edge also prevents the plug from slipping deeper into the drill hole for secure installation. The high-quality nylon material guarantees a permanently secure hold in a wide range of solid and perforated building materials. 4-Way expansion for high load values Fixing blades for screw fixation and flexible mounting Installation of the plug possible with little effort Plug edge prevents slipping deeper into the drill hole Noticeable tightening torque prevents overtightening of the screw The 4-way expansion ensures optimum force transmission into the building material and guarantees high holding values in solid and perforated building materials The special fixing wings ensure pre-fixation of the screw, leaving both of the user's hands free during the setting process The expansion-free plug neck prevents the creation of expansion forces on the material surface whilst screwing in the screw. This helps to prevent damage to tiles and plaster The special shape of the plug makes it easy to insert into the drill hole with just a few hammer blows The pronounced edge of the plug prevents it from slipping deeper into the drill hole and enables secure installation Due to the noticeable tightening torque, the user automatically recognizes when the screw is properly installed and thus prevents overtightening of the screw Suitable for The SX Plus is suitable for pre-positioned and push-through installation When the plug is inserted, the fixing wings fold inwards. This locks the screw in place when it is inserted into the plug and prevents it from falling out, which is particularly helpful in overhead applications When the screw is tightened, the SX Plus expands in four directions and thus anchors itself securely in the building material The anti-rotation lock prevents the plug from twisting and allows for easy installation Suitable for wood and chipboard screws, as well as stud screws The required screw length is given by the plug length + fixture thickness + the screw diameter Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Solid stone of leightweight concrete Hollow block of leightweight concrete Natural stone Hollow brick & concrete ceilings Solid gypsum boards Application Lamps Wardrobes Motion detectors Skirting boards Light wall shelves Mirror cabinets Mailboxes TV consoles Trellis Folding shutters Fire detector ds: dsc: Scope of delivery (per purchase of 50) 50x SX Plus 10x50 kts: plug SX Plus 10 x 50 kpn: 568010 kpn_dash: kpn_clear: 568010 bkpn: FISCHER 568010 bkpn_clear: FISCHER 568010 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 568010 sr_ns: FISCHER568010
r: 03297779 p: 0.45 pid: 176149 b: FISCHER q: 60 st: 1 lt: 1 ean: 4048962262216 sr: FISCHER 538254 sr_no_br: 538254 sr_no_br_cl: 538254 sr_cl: FISCHER538254 sr_dash: sold: 99 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw No Drilling diameter 14 mm type (screw head) Application General Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 90 mm Length (Wall plug) 70 mm n: FISCHER 538254 DuoPower 14x70 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The duo of power and intelligence The fischer DuoPower offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best hold. The expansion wings of the red component support the secure expansion and offer additional security to the grey component. Easy screwing-in of the screw and correct "tightening" to close. No over-tightening of the screw. The preshaped edge on the plug head prevents the plug from slipping into the drill hole. Combination of two material components for more performance Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting) Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly Two component materials for top load values and intelligent functioning depending on the substrate Great feedback (feel-good factor) of the plug. You can feel exactly, when the plug is installed perfectly The narrow plug rim prevents slipping into the drill hole The serrated anti-rotation feature prevents rotation in the drill hole during installation The greater anchorage depth of the DuoPower 6 x 50, 8 x 65 and 10 x 80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The DuoPower is suitable for pre-positioned and push-through installation The red expansion wings support the safe expansion and offer additional safety for the grey component The duo of two different materials and its multiple functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads The required screw length is given by the plug length + fixture thickness + 1x the screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of fixing boards, the threadless part of the screw must not be longer than the fixture Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Plasterboard Gypsum plasterboard and gypsum fibreboards Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete or similar Natural stone Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Application TV consoles Lighting Shelves Mirror cabinets Letter boxes Pictures Fixing blinds Curtain rails Wash basin fixings Plumbing and heating fixings Bath and toilet installations Wall cabinets Range hood ds: dsc: Scope of delivery (per purchase of 20) 20x DuoPower 14x 70 kts: DuoPower 14x70 kpn: 538254 kpn_dash: kpn_clear: 538254 bkpn: FISCHER 538254 bkpn_clear: FISCHER 538254 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 538254 sr_ns: FISCHER538254
r: 02020184 p: 4.88 pid: 96807 b: FISCHER q: 0 st: lt: 8 ean: 4006209972571 sr: FISCHER 97257 sr_no_br: 97257 sr_no_br_cl: 97257 sr_cl: FISCHER97257 sr_dash: sold: 97.6 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Length 75 mm Anchoring depth 75 mm Width across flats 19 mm Effective length 10 mm Drill hole depth 90 mm Drilling diameter 12 mm n: FISCHER 97257 highbond anchor FHB II-A S M12 x 75/10 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort. The fischer Highbond rod anchor FHB II-A S is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that railings, machines and heavy steel constructions are securely installed within internal areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M12 x 75/10 ev kpn: 97257 kpn_dash: kpn_clear: 97257 bkpn: FISCHER 97257 bkpn_clear: FISCHER 97257 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97257 sr_ns: FISCHER97257
r: 02011764 p: 3.22 pid: 10604 b: FISCHER q: 0 st: lt: 4 ean: 4006209484098 sr: FISCHER 48409 sr_no_br: 48409 sr_no_br_cl: 48409 sr_cl: FISCHER48409 sr_dash: sold: 96.6 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 20 mm Drilling diameter 25 mm n: FISCHER EA II M20x80 strike anchor electrolytically galvanised steel - 48409 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The internally threaded anchor with a rim for simple Hammerset installation. The fischer Hammerset anchor EA II is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II is ideal for fixing sprinkler systems, gratings, and consoles in internal areas with approval. Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve Use of standard metric screws and threaded rods lowers complexity Power-saving series installation with machine setting tool EA II S-SDS Visual control due to embossing ETA approval for non-cracked concrete The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use The EMS machine setting tool allows for effortless installation, particularly in the case of series installations The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded The black fixing point prevents the anchor from falling out of the drill hole during overhead installation Suitable for The EA II is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall The setting tools must sit on the rim of the anchor to ensure correct expansion Building materials Approved for: Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Pipelines and ventilation ducts Sprinkler systems Cable conduits and wires Gratings Steel constructions Machines Consoles Shuttering props ds: dsc: kts: strike anchor electrolytically galvanised steel kpn: EA II M20x80 kpn_dash: kpn_clear: EAIIM20x80 bkpn: FISCHER EA II M20x80 bkpn_clear: FISCHER EAIIM20x80 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 48409 sr_ns: FISCHER48409
r: 02062543 p: 0.137 pid: 20601 b: FISCHER q: 0 st: lt: 8 ean: 4006209797297 sr: FISCHER 79729 sr_no_br: 79729 sr_no_br_cl: 79729 sr_cl: FISCHER79729 sr_dash: sold: 95.9 p_range: none type: standard act: 1 avo: 1 av: Outer diameter 40 mm Thickness 3 mm For bolt M8 Inner diameter 8,4 mm n: FISCHER 79729 washer U 8 x 40 cn: WASHER cn2: WASHER cn_clear: WASHER d: Product description Washer for fischer installation system. The fischer washer U is a mounting element for the fischer installation system. The washer is produced from high-quality steel and zinc-plated in lie with DIN EN 10139. Made of zinc-galvanised steel Universal use Application For use in dry interior areas For indoor and outdoor application For indoor and outdoor applications and in environments with high stress to components due to corrosion ds: dsc: kts: washer U 8 x 40 kpn: 79729 kpn_dash: kpn_clear: 79729 bkpn: FISCHER 79729 bkpn_clear: FISCHER 79729 c_path: Home / Fasteners and machine components / Fasteners / Rings and plates / Washer | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer rings and plates / Fischer washer sr_no_br_cl_ns: 79729 sr_ns: FISCHER79729
r: 02020201 p: 4.66 pid: 16149 b: FISCHER q: 0 st: lt: 8 ean: 4006209970331 sr: FISCHER 97033 sr_no_br: 97033 sr_no_br_cl: 97033 sr_cl: FISCHER97033 sr_dash: sold: 93.2 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Length 60 mm Anchoring depth 60 mm Width across flats 13 mm Effective length 30 mm Drill hole depth 75 mm Drilling diameter 10 mm n: FISCHER 97033 highbond anchor FHB II-A L M8 x 60/30 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tensile loads. The fischer Highbond rod anchor FHB II-A L is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that large machines and heavy steel constructions are securely installed within internal areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M8 x 60/30 ev kpn: 97033 kpn_dash: kpn_clear: 97033 bkpn: FISCHER 97033 bkpn_clear: FISCHER 97033 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97033 sr_ns: FISCHER97033
r: 03072606 p: 0.31 pid: 176143 b: FISCHER q: 0 st: lt: 8 ean: 4048962329483 sr: FISCHER 546390 sr_no_br: 546390 sr_no_br_cl: 546390 sr_cl: FISCHER546390 sr_dash: sold: 93 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Length 40 mm n: FISCHER 546390 concrete screw FBS II 6x40/5 hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer concrete screw UltraCut FBS II 6 US is made of zinc-plated steel with a hexagonal head and pressed washer. The UltraCut FBS II 6 US is perfectly designed for applications like fixings of pipe routes, channel systems, ventilation ducts and facilities in the building service engineering. When the concrete screw is screwed into the drill hole using an impact driver, the thread flanks cut deep into the concrete, thus ensuring top load-bearing capacity. The low drilling effort saves time in the case of multiple fixations. The European Technical Approval for cracked concrete and non-cracked concrete as well as for seismic loads and classification into fire resistance class R 120 guarantee even more safety. The first concrete screw with diameter 6 and variable embedment depths enables high flexibility and a precise adaption on the loads The ETA assessment option 1 includes the use in cracked and non-cracked concrete for highest safety requirements The first 6 mm diameter concrete screw with an ETA assessment for the C1 seismic performance category for additional safety standards The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates The first concrete screw with diameter 6 and variable embedment depths enables high flexibility and a precise adaption on the loads The ETA assessment option 1 includes the use in cracked and non-cracked concrete for highest safety requirements The first 6 mm diameter concrete screw with an ETA assessment for the C1 seismic performance category for additional safety standards The UltraCut FBS II 6 is approved for multiple use of non-load bearing systems and thereby ideal for the installation of pipe routes, cable trays and prestressed hollow concrete ceilings Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Different head designs offer a maximum of flexibility and a perfect adaptation to the application The hexagonal head with pressed washer and ribs under the head prevent accidental loosening of the anchor making the system more secure The special head geometry for use in mounting rails with a socket (SW10) enables simple installation of the add-on part The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The concrete screw UltraCut FBS II 6 offers the possibility for use in masonry (solid building material) The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II 6 is recommended for the push-through and pre-positioned installation We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Prestressed hollow concrete ceilings C30/37 to C50/60 for the multiple use of non-load bearing systems Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Masonry with a dense structure Solid building materials Application Pipeline routes Suspension for individual pipes Suspended mounting rails Prestressed concrete hollow core ceilings Cable trays Ventilation ducts Perforated tapes ds: dsc: kts: concrete screw FBS II 6x40/5 hexagon head kpn: 546390 kpn_dash: kpn_clear: 546390 bkpn: FISCHER 546390 bkpn_clear: FISCHER 546390 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 546390 sr_ns: FISCHER546390
r: 02824732 p: 0.084 pid: 176015 b: FISCHER q: 600 st: 1 lt: 1 ean: 4048962293296 sr: FISCHER 541898 sr_no_br: 541898 sr_no_br_cl: 541898 sr_cl: FISCHER541898 sr_dash: sold: 92.4 p_range: none type: standard act: 1 avo: 1 av: Length 80 mm n: FISCHER 541898 clamping sleeve FNH 6 x 80 cn: CLAMPING SLEEVE cn2: CLAMPING SLEEVE cn_clear: CLAMPINGSLEEVE d: Product description The user-friendly spring sleeve for light fixings in solid building materials. The fischer nail sleeve FNH is a user-friendly spring sleeve made out of corrosion-resistant steel. The nail sleeve is driven into the through-type installation in a time-saving manner with the hammer, and expands along its whole length in the drill hole. This allows timber and metal sub-constructions, metal profiles, and squared timbers to be fixed in solid building materials in a cost-effective manner in interior areas and temporarily in external areas. Knock in with the hammer - finished Fixing without screws and plugs. This saves time and lowers costs No plugs or screws are required for the one-piece nail sleeve. This guarantees a simple and easy installation The geometry of the nail sleeve makes it easy to push it into the drill hole. This saves time and money Suitable for The FNH nail sleeve is suitable for push-through installation The nail sleeve is hammered in and expands its entire length in the hole FNH is suitable for interior applications and for temporary external fixings Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick Application Squared timbers Substructures made of wood and metal Metal profiles ds: dsc: kts: clamping sleeve FNH 6 x 80 kpn: 541898 kpn_dash: kpn_clear: 541898 bkpn: FISCHER 541898 bkpn_clear: FISCHER 541898 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Clamping sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer clamping sleeve sr_no_br_cl_ns: 541898 sr_ns: FISCHER541898
r: 08096965 p: 4.59 pid: 176302 b: FISCHER q: 0 st: lt: 8 ean: 4048962463163 sr: FISCHER 564691 sr_no_br: 564691 sr_no_br_cl: 564691 sr_cl: FISCHER564691 sr_dash: sold: 91.8 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 10 mm Overall length 95 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M10 n: FISCHER 564691 Piercing anchor FAZ II Plus 10/10 H R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With cap nut. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus H is the steel anchor for highest demands. The new sizes of the special cap nut version (M10 and M12) are also implemented in the ETA assessment and it is ideal for architecturally sophisticated applications. Thanks to variable anchorage depths and easy installation, the FAZ II Plus can be used in many different ways. The tried-and-trusted expansion clip securely feeds the loads into the concrete and ensures a high load-bearing-capacity. The FAZ II Plus H is the optimal solution (for example) for the anchorage of railings in visible areas: The cap nut, not only gives the option for a better and refined optical design but also, ensures an accident free installation due to its closed shape. Quick and easy assembly without the need for drill hole cleaning (M8-M24) Stainless steel: maximum safety for outdoor use Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The cap nut is implemented in the ETA assessment and it is ideal for architecturally sophisticated applications Due to its closed shape, the cap nut version ensures an accident free installation The cap nut is implemented in the ETA assessment and it is ideal for architecturally sophisticated applications Due to its closed shape, the cap nut version ensures an accident free installation Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus H is suitable for pre-positioned and push-through installation When applying the torque, the cone bolt is pulled into the expansion sleeve and expand it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Guard rails Consoles ds: dsc: kts: Piercing anchor FAZ II Plus 10/10 H R stainless steel kpn: 564691 kpn_dash: kpn_clear: 564691 bkpn: FISCHER 564691 bkpn_clear: FISCHER 564691 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564691 sr_ns: FISCHER564691
r: 87030007 p: 0.12 pid: 74331 b: FISCHER q: 200 st: 1 lt: 1 ean: 4006209501122 sr: FISCHER 50112 sr_no_br: 50112 sr_no_br_cl: 50112 sr_cl: FISCHER50112 sr_dash: sold: 90 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 60 mm Drill hole depth - mm Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Wall plug type Universal plug With screw No With collar No Application Brick; Concrete; Aerated concrete; Construction board type (screw head) Drilling diameter 12 mm n: FISCHER 50112 plug S 12 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The installation-friendly nylon plug with 2-way expansion. The fischer expansion plug S is the original and the proven classic millions of times for decades. The plastic fixing is made entirely from high-quality nylon. As a result, the plug is particularly robust during installation and guarantees permanent security. As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This prevents the building material from spalling due to fixings close to the edge. Wood or chipboard screws can be used to fix the object. The fischer expansion plug S is ideal for fixing in concrete and solid masonry. The rimless plug is suitable for pre-positioned and push-through installation Simple insertion due to the ease of pushing in the plug The anti-rotation lock prevents rotation in the drill hole. This guarantees a high degree of safety during installation The rimless plug sleeve allows for the plug to be set as deep as required below the plaster to the bearing substrate to achieve the maximum load-bearing capacity As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This allows for smaller edge distances The slimline plug geometry makes it easy to push the plug into the drill hole. For a fast and simple installation The anti-rotation lock prevents the plug rotating in the drill hole, thus guaranteeing a high level of installation safety Suitable for The expansion plug S is suitable for pre-positioned and push-through installation When turning in the screw, the expansion plug S expands in two directions, thus providing a secure anchoring in the building material The required screw length is given by the plug length + plaster and/or insulation material thickness + fixture thickness + 1 x screw diameter Suitable for wood and chipboard screws The edge distance must be at least one plug length For installations close to the edge, turn the plug so that the expansion force acts parallel to the edge Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick made from lightweight concrete Solid brick Application Pictures Lighting Skirting Light shelves Mirror cabinets Letter boxes Motion detectors Information boards Curtain rails Electrical installations ds: dsc: kts: plug S 12 kpn: 50112 kpn_dash: kpn_clear: 50112 bkpn: FISCHER 50112 bkpn_clear: FISCHER 50112 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 50112 sr_ns: FISCHER50112
r: 02776747 p: 0.88 pid: 22088 b: FISCHER q: 0 st: lt: 4 ean: 4048962251364 sr: FISCHER 536853 sr_no_br: 536853 sr_no_br_cl: 536853 sr_cl: FISCHER536853 sr_dash: sold: 88 p_range: none type: standard act: 1 avo: 1 av: Diameter 8 mm Max. useful length 30 mm Length 80 mm n: FISCHER 536853 concrete screw FBS II 8x80 30/15 hexagon head with TX recess cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 8x80 30/15 hexagon head with TX recess kpn: 536853 kpn_dash: kpn_clear: 536853 bkpn: FISCHER 536853 bkpn_clear: FISCHER 536853 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536853 sr_ns: FISCHER536853
