r: 08134125 p: 0.8 pid: 176373 b: FISCHER q: 0 st: lt: 8 ean: 4048962254105 sr: FISCHER 537261 sr_no_br: 537261 sr_no_br_cl: 537261 sr_cl: FISCHER537261 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Length (Wall plug) 50 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Cavity wall plug With screw Yes With collar No Application General n: FISCHER 537261 Hollow wall plug DuoTec 10 S with screw cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The assembly-friendly solution for heavy loads in sheet metal. A combination of two material components for more power. The flange sleeve reinforces the drill hole and enables significantly higher transverse forces. The curved handle enables obstacle detection before starting assembly. The flexible screw fastening allows the use of screws and hooks with different thread shapes. The fibreglass-reinforced plastic and metal insert ensure the absorption of high tensile and transverse forces in all types of sheet material. The soft, grey nylon contact side distributes the load over the entire sheet surface, minimising any weakening of the supporting building material. Common borehole diameters and a short rocker element ensure easy installation even in small or insulated hollow spaces. The white flange sleeve with locking function ensures fast and secure mounting of the plug in the drilled hole. With scale on the band for determining the required screw length (scale value + 20 mm). The unique functioning and geometry of the dowel allow extremely heavy loads for rocker plugs. This reduces the number of fasteners in multiple fastenings and maximises safety. As part of the DuoLine, the DuoTec consists of two plastic components. The red and hard component of the plug's sleeve enables the uniform distribution of the load, while the grey and white prevent damage to the surface of the board during fastening and thus a load reduction. In applications in board materials, which have a hollow space behind them, the DuoTec is applied as a tumbling plug. In solid building materials, the plug can also be used as a spreader plug. Applications Suspended kitchen cabinets Wall cabinets Bookshelves Wardrobes Handrails Paintings Mirrors Lamps Heavy hanging baskets Building materials Suitable for: Plasterboard Gypsum fibreboard Wooden panels (e.g. OSB, chipboard, MDF, etc.) Steel plate Plastic sheets Concrete hollow brick Also suitable for: Solid materials such as concrete and wood ds: dsc: Scope of delivery (per purchase of 10) 10x DuoTec 10 10x screw with cylinder head 5.0x 60 kts: Hollow wall plug DuoTec 10 S with screw kpn: 537261 kpn_dash: kpn_clear: 537261 bkpn: FISCHER 537261 bkpn_clear: FISCHER 537261 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 537261 sr_ns: FISCHER537261
r: 08096855 p: 0.77 pid: 176243 b: FISCHER q: 0 st: lt: 8 ean: 4048962462968 sr: FISCHER 564671 sr_no_br: 564671 sr_no_br_cl: 564671 sr_cl: FISCHER564671 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 8 mm Effective length 5 mm Overall length 60 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M8 n: FISCHER 564671 Piercing anchor FAZ II Plus 8/5 K EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 8/5 K EV electrolytically galvanised steel kpn: 564671 kpn_dash: kpn_clear: 564671 bkpn: FISCHER 564671 bkpn_clear: FISCHER 564671 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564671 sr_ns: FISCHER564671
r: 08096867 p: 0.76 pid: 176251 b: FISCHER q: 0 st: lt: 8 ean: 4048962461985 sr: FISCHER 564573 sr_no_br: 564573 sr_no_br_cl: 564573 sr_cl: FISCHER564573 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 6 mm Effective length 20 mm Overall length 75 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M6 n: FISCHER 564573 Piercing anchor FAZ II Plus 6/20 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands, now with even higher tensile strengths. Heavy loads can be secured in cracked concrete using the steel anchor. The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity. For example, the steel anchor is ideal for the anchoring of railings, cable trays, and consoles. Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Millimeter accurate adjustment to the loads due to the variable anchoring depths The first bolt anchor M6 with ETA evaluation option 1: for safe approved anchorages The tried-and-tested expansion clip ensures highest load capacity even with size M6 Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 6/20 EV electrolytically galvanised steel kpn: 564573 kpn_dash: kpn_clear: 564573 bkpn: FISCHER 564573 bkpn_clear: FISCHER 564573 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564573 sr_ns: FISCHER564573
r: 87990535 p: 0.75 pid: 176413 b: FISCHER q: 0 st: lt: 13 ean: 4006209902769 sr: FISCHER 90276 sr_no_br: 90276 sr_no_br_cl: 90276 sr_cl: FISCHER90276 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Length 130 mm n: FISCHER 90276 anchor rod FIS A M8 x 130 zinc plated 5.8 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The FIS A versatile rod anchor The fischer threaded rod FIS A is made from zinc-plated, steel grade 5. 8. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system. The system, made from zinc-plated threaded rods in conjunction with fischer injection mortars, is suitable and approved for fixings in dry interiors. The universal solution for various fischer injection mortars. For a manageable range and simpler storage Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various fischer injection mortars Optimum load adaptation due to variable anchorage depths. This lowers installation and material costs The anchor rod FIS A can be used with almost every fischer injection mortar (except Highbond special mortar FIS HB). It can be individually selected based on requirements, thus allowing for a wide range of applications The wide range of approved anchor rods FIS A from M6 to M30 allows for various applications Please refer to the approvals of the injection mortar used Suitable for The anchor rod FIS A is suitable for pre-positioned and push-through installation FIS A is set manually into the drill hole, by lightly rotating it until it reaches the drill hole base Building materials In connection with several fischer injection mortars the anchor rod FIS A is approved or suitable for different building materials Application Anchorings with each of the fischer injection mortars such as FIS V Plus, FIS V Zero, FIS PM, FIS SB, FIS EM Plus, FIS EB II, FIS V, FIS VL, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod FIS A M8 x 130 zinc plated 5.8 kpn: 90276 kpn_dash: kpn_clear: 90276 bkpn: FISCHER 90276 bkpn_clear: FISCHER 90276 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 90276 sr_ns: FISCHER90276
r: 02019786 p: 0.74 pid: 17167 b: FISCHER q: 0 st: lt: 8 ean: 4006209441169 sr: FISCHER 44116 sr_no_br: 44116 sr_no_br_cl: 44116 sr_cl: FISCHER44116 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Material Steel Surface treatment Zinc plated Length 65 mm Effective length 30 mm Head diameter 13 mm Drilling diameter 6 mm n: FISCHER 44116 nail anchor FNA II 6x30/30 with nail head electrolytically galvanised cn: DROP-IN ANCHOR cn2: DROP-IN ANCHOR cn_clear: DROPINANCHOR d: Product description The installation-friendly Hammerset anchor for multiple fixings. The fischer nail anchor FNA II 6 with nail head is made of zinc-plated steel. The FNA II is set in a time-saving manner in the push-through installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail anchor FNA II 6 with nail head is suitable for fixing fire protection boards, wire and nonious hangers in internal areas. Hammerset installation saves time No reinforcement hits due to low anchorage depth This saves time and costs during series installation Expansion clip provides a firm hold ETA approval for multiple fixings Series installation possible with setting tool for the hammer drill. This saves time and costs The special active principle allows for a simple hammerset installation and, therefore, a short processing time The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use Suitable for The FNA II with nail head is suitable for push-through installation. The FNA II M6 is suitable for pre-positioned and pushthrough installation. The FNA II OE and Hare suitable for pre-positioned installation The installed nail anchor FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall Available setting tools:FNA S-SBO to slip onto the drill,FNA S-SDS for series installation with a drilling hammer,FNA S-H for the manual installation of mounting rails Building materials Approved for: Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications Also suitable for: Solid sand-lime brick Natural stone with dense structure Prestressed hollow-core concrete slabs Application Fire protection plates Fire protection boards Ventilation systems Wire and nonious hangers Mounting rails Metal clamps Substructures made of wood and metal ds: dsc: kts: nail anchor FNA II 6x30/30 with nail head electrolytically galvanised kpn: 44116 kpn_dash: kpn_clear: 44116 bkpn: FISCHER 44116 bkpn_clear: FISCHER 44116 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Drop-in anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer drop-in anchor sr_no_br_cl_ns: 44116 sr_ns: FISCHER44116
r: 08134109 p: 0.74 pid: 176369 b: FISCHER q: 0 st: lt: 8 ean: 4048962402728 sr: FISCHER 557728 sr_no_br: 557728 sr_no_br_cl: 557728 sr_cl: FISCHER557728 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 8 mm Length (Wall plug) 48 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Universal plug With screw Yes With collar Yes Application Concrete n: FISCHER 557728 duoseal 8 x 48 with stainless steel A2 round head screw cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The waterproof plug for wet areas The DuoSeal completely seals drill holes in tiles without using additional sealant and thus prevents structural damage caused by moisture in the building material. The DuoSeal is ideally suited for tiled surfaces that are very frequently exposed to splashing water. The universal plug can be easily fitted into tiles without damaging them. The red component ensures a firm grip in all building materials. Thus, the DuoSeal achieves the same load values as conventional nylon plugs. The included stainless steel screw is perfect for installation in wet areas and prevents rusting. The soft plastic rim completely seals the drilled hole and flexibly adapts to the shape of the attachment. The DuoSeal meets the highest water exposure class according to DIN 18534. The fischer DuoSeal is a 2-component plug that seals the borehole in wet areas without additional sealant. The nylon plug with the supplied stainless steel screw has been independently tested by the testing and certification institute of the Säure Fliesner Vereinigung e. V. Its water tightness has been confirmed in accordance with ETAG 022 and DIN 18534 up to Water Exposure Class W3-I. Taking into account the national and international sealing standards for wet areas, the DuoSeal in combination with the supplied screw is suitable for applications in commercial, private and public wet areas frequently exposed to splash water and occasional water accumulation. Applications In tiled wet areas such as: Bathrooms Kitchens Spas Swimming pools Sports facilities Laundry rooms Suitable for: Accessories Taps Shower panels Mirrors Shelves Hairdryer holders Kitchen accessories Pipes Building materials Concrete Solid brick Solid sand-lime brick Hollow concrete blocks Vertically perforated brick Perforated sand-lime brick Aerated concrete Plasterboard Gypsum fibreboard Chipboard Gypsum block ds: dsc: Scope of delivery (per purchase of 25) 25x DuoSeal 8x 48 25x stainless steel round head screw 6.0x 70 A2 kts: duoseal 8 x 48 with stainless steel A2 round head screw kpn: 557728 kpn_dash: kpn_clear: 557728 bkpn: FISCHER 557728 bkpn_clear: FISCHER 557728 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 557728 sr_ns: FISCHER557728
r: 02019859 p: 0.73 pid: 17440 b: FISCHER q: 0 st: lt: 8 ean: 4006209441275 sr: FISCHER 44127 sr_no_br: 44127 sr_no_br_cl: 44127 sr_cl: FISCHER44127 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Material Steel Surface treatment Zinc plated Length 54 mm Drilling diameter 6 mm n: FISCHER 44127 nail anchor FNA II 6x25 oe with eye electrolytically galvanised cn: DROP-IN ANCHOR cn2: DROP-IN ANCHOR cn_clear: DROPINANCHOR d: Product description The installation-friendly Hammerset anchor with eye for multiple fixings. The fischer nail anchor FNA II 6 with eye is made of zinc-plated steel. The FNA II is set in a time-saving manner in the pre-positioned installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail anchor FNA II 6 with eye is suitable for fixing air lines and hangers in internal areas. Hammerset installation saves time No reinforcement hits due to low anchorage depth This saves time and costs during series installation Expansion clip provides a firm hold With eye The special active principle allows for a simple hammerset installation and, therefore, a short processing time The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use Suitable for The FNA II with nail head is suitable for push-through installation. The FNA II M6 is suitable for pre-positioned and push-through installation. The FNA II OE and H are suitable for pre-positioned installation The installed FNA II nail anchor expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall Available setting tools:FNA S-SBO to slip onto the drill,FNA S-SDS for series installation with a drilling hammer,FNA S-H for the manual installation of mounting rails Building materials Approved for: Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications Also suitable for: Solid sand-lime brick Natural stone with dense structure Prestressed hollow-core concrete slabs Application Fire protection plates Fire protection boards Ventilation systems Wire and Nonius hangers Mounting rails Metal clamps Substructures made of wood and metal ds: dsc: kts: nail anchor FNA II 6x25 oe with eye electrolytically galvanised kpn: 44127 kpn_dash: kpn_clear: 44127 bkpn: FISCHER 44127 bkpn_clear: FISCHER 44127 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Drop-in anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer drop-in anchor sr_no_br_cl_ns: 44127 sr_ns: FISCHER44127
r: 02019857 p: 0.73 pid: 15986 b: FISCHER q: 0 st: lt: 8 ean: 4006209441268 sr: FISCHER 44126 sr_no_br: 44126 sr_no_br_cl: 44126 sr_cl: FISCHER44126 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Material Steel Surface treatment Zinc plated Length 54 mm Drilling diameter 6 mm n: FISCHER 44126 nail anchor FNA II 6x25 H with hook electrolytically galvanised cn: DROP-IN ANCHOR cn2: DROP-IN ANCHOR cn_clear: DROPINANCHOR d: Product description The installation-friendly Hammerset anchor with hook for multiple fixings. The fischer nail anchor FNA II 6 with hook is made of zinc-plated steel. The FNA II is set in a time-saving manner in the pre-positioned installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail anchor FNA II 6 with hook is suitable for fixing air lines and hangers in internal areas. Hammerset installation saves time No reinforcement hits due to low anchorage depth This saves time and costs during series installation Expansion clip provides a firm hold With hook The special active principle allows for a simple hammerset installation and, therefore, a short processing time The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use Suitable for The FNA II with nail head is suitable for push-through installation. The FNA II M6 is suitable for pre-positioned and push-through installation. The FNA II OE and H are suitable for pre-positioned installation The installed FNA II nail anchor expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall Available setting tools:FNA S-SBO to slip onto the drill,FNA S-SDS for series installation with a drilling hammer,FNA S-H for the manual installation of mounting rails Building materials Approved for: Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications Also suitable for: Solid sand-lime brick Natural stone with dense structure Prestressed hollow-core concrete slabs Application Fire protection plates Fire protection boards Ventilation systems Wire and Nonius hangers Mounting rails Metal clamps Substructures made of wood and metal ds: dsc: kts: nail anchor FNA II 6x25 H with hook electrolytically galvanised kpn: 44126 kpn_dash: kpn_clear: 44126 bkpn: FISCHER 44126 bkpn_clear: FISCHER 44126 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Drop-in anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer drop-in anchor sr_no_br_cl_ns: 44126 sr_ns: FISCHER44126
r: 02890393 p: 0.73 pid: 176029 b: FISCHER q: 0 st: lt: 6 ean: 4048962254082 sr: FISCHER 537259 sr_no_br: 537259 sr_no_br_cl: 537259 sr_cl: FISCHER537259 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 10 mm Application Construction board type (screw head) PZ3 Wall plug type Cavity wall plug Material (wall plug) Polyamide (Nylon®) Drill hole depth 65 mm Length (Wall plug) 50 mm n: FISCHER 537259 Hollow wall plug DuoTec 10 S with screw cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description Easy to install nylon toggle for high loads in all panel building materials The unique function and toggle geometry of the fischer DuoTec allows it to handle very heavy loads for a gravity toggle. Where multiple fixings are required, this reduces the number of fixings and maximises security. As a member of the DUO line, the fischer DuoTec comprises two plastic components. The red and hard component of the plug sleeve facilitates the consistent distribution of the load, while the grey and soft component prevents damage to the panel's surface by the fixing, reducing the load. The fischer DuoTec is set like a gravity toggle for applications in panel building materials. The toggle can also be used as an expansion plug in solid building materials. Flexible screw mount allows for the use of screws and hooks with different thread shapes Glass fibre-reinforced plastics and a metal skeleton insert (fischer DuoTec 12) allow the toggle to handle heavy tensile and transverse loads in all panel building materials Soft grey nylon contact surface distributes the load over the panel surface, thereby minimising weakening of the supporting building material Standard drill hole diameters and short tilting element for easy installation in narrow cavities, including cavities with insulation White flush sleeve with snap function allows the plug to be pre-installed quickly and securely in the drill hole With scale on the grip strap (fischer DuoTec 12) for determining the required screw length (scale value + 20 mm) Suitable for The fischer DuoTec is designed for pre-positioned installation Simple installation with a standard diameter 10 or 12 mm drill bit The short toggle element makes it suitable for narrow and even with mineral wool insulated cavities. Note the length of the toggle element! Functions like an expansion plug in solid building materials such as concrete or wood. Note, not with metric screws! Flexible screw insert allows for the use of wood, chipboard and metric screws and hooks Building materials Suitable for: Gypsum plasterboard Gypsum fibreboard Wooden panels, such as OSB boards, chipboard, MDF sheets Steel plates Plastic boards Hollow blocks made from concrete Also functioning in: Solid materials, such as concrete and wood Application Kitchen hanging cabinets Living room cabinets Shelves Wardrobes Handrails Pictures Mirrors Lamps Heavy hanging baskets ds: dsc: kts: Hollow wall plug DuoTec 10 S with screw kpn: 537259 kpn_dash: kpn_clear: 537259 bkpn: FISCHER 537259 bkpn_clear: FISCHER 537259 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 537259 sr_ns: FISCHER537259
r: 08134147 p: 0.72 pid: 176423 b: FISCHER q: 0 st: lt: 8 ean: 4048962330298 sr: FISCHER 546506 sr_no_br: 546506 sr_no_br_cl: 546506 sr_cl: FISCHER546506 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Length (Wall plug) 60 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Hammer-in plug With screw Yes With collar Yes Application Concrete type (screw head) Spanner size 10 mm n: FISCHER 546506 construction plug SXRL 10 x 60 FUS hexagon head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile one with multiple anchorage depth ETA-rated with excellent load values: secure multiple fixings of non-load-bearing systems in concrete and masonry. The long spreading element makes the SXRL versatile for all kinds of applications. The loads are distributed evenly in the building material thanks to the dowel's geometry. As a result, load-bearing material in thin-walled building material is not irreparably damaged. Easy installation: ribs prevent the plug from rotating during deeper insertion. The long spreading element with several anchoring depths of 50, 70 and 90 mm for SXRL 8 and 10 and with 70 and 90 mm for SXRL 14 makes the SXRL an extremely versatile product. The plug's special geometry distributes forces evenly in the drill hole. The approval for single fixing in cracked concrete makes the SXRL the preferred specialist in concrete. In the case of deep mounting, the extra-long wings prevent the plug from rotating with the drill hole. The SXRL 14 is also approved for applications under pressure and can be used for façade structures installed without a wall bracket with spacing. The SXRL with useful lengths of up to 240 mm offers the right plug for every application. The fischer construction plug SXRL is ETA approved in combination with the fischer safety screw with hexagonal head for multiple fixings of non-load-bearing systems in concrete, masonry and aerated concrete. The SXRL 10 is also approved as a single-point fixing in concrete. In addition, the SXRL 14 is approved for remote mounting of façade systems. In perforated bricks, the spreading zones of the plug ensure even force distribution, in aerated concrete and solid material they merge into one long spreading element. This guarantees excellent load values. The comprehensive range with diameters 8, 10 and 14 mm and plug lengths up to 360 mm enable many applications. The SXRL with hexagonal screw and washer is particularly recommended for fixing metal structures. The SXR L impresses with its optimum ease of use and high level of mounting security. Applications Cladding, ceiling and roof constructions made of wood and metal Wall substructures under pressure load (e.g. spacer installation without wall bracket) Windows Fences and doors Wardrobes Suspended kitchen cabinets Rachelwerk Beams TV consoles Finish coat Metal brackets Metal supports Cable ducts Cable ducts Building materials Approved for: Perforated brick Aerated concrete Lightweight concrete hollow core brick Perforated sand-lime brick Thermal insulation blocks Solid blocks of normal and lightweight concrete Solid clay brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: High-density natural stone Gypsum blocks ds: dsc: kts: construction plug SXRL 10 x 60 FUS hexagon head kpn: 546506 kpn_dash: kpn_clear: 546506 bkpn: FISCHER 546506 bkpn_clear: FISCHER 546506 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 546506 sr_ns: FISCHER546506
r: 02890418 p: 0.7 pid: 176025 b: FISCHER q: 0 st: lt: 8 ean: 4048962180756 sr: FISCHER 522699 sr_no_br: 522699 sr_no_br_cl: 522699 sr_cl: FISCHER522699 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 50 mm Drill hole depth 65 mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40 Drilling diameter 10 mm n: FISCHER 522699 construction plug SXRL 10 x 100 T countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL-T is approved along with the fischer countersunk head screw with TX40 drive for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings in internal areas such as windows, coat racks, wall cupboards, or TV consoles. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 and 90 mm for SXRL 8 and SXRL 10 and 70 and 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 290 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 10 x 100 T countersunk head kpn: 522699 kpn_dash: kpn_clear: 522699 bkpn: FISCHER 522699 bkpn_clear: FISCHER 522699 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 522699 sr_ns: FISCHER522699
r: 02019164 p: 0.7 pid: 10564 b: FISCHER q: 0 st: lt: 8 ean: 4006209685044 sr: FISCHER 68504 sr_no_br: 68504 sr_no_br_cl: 68504 sr_cl: FISCHER68504 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Overall length 94 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 10 mm n: FISCHER FSA 10x80/35 B sleeve anchor with nut electrolytically zinc plated - 68504 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with nut and washer for structural fixings in non-cracked concrete. The fischer sleeve anchor FSA-B is a zinc-plated steel anchor with nut and washer for structural fixings made of zinc-plated steel. The FSA-B is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-B is ideal for fastening fixings that are not relevant in safety terms such as ladders, gates, and temporary fixings in non-cracked concrete. Simple alignment due to optimised anchor geometry, even in narrow spaces Surface flush removal due to detachable screw connection With nut and washer The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B) The detachable screw connection allows for surface flush removal Suitable for The FSA is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base Building materials Suitable for: Concrete C12/15 to C20/25, non-cracked Natural stone with dense structure Application Handrails Consoles Ladders Cable trays Gates Façades Temporary or structural fixings ds: dsc: kts: sleeve anchor with nut electrolytically zinc plated kpn: FSA 10x80/35 B kpn_dash: kpn_clear: FSA10x8035B bkpn: FISCHER FSA 10x80/35 B bkpn_clear: FISCHER FSA10x8035B c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 68504 sr_ns: FISCHER68504
r: 87051106 p: 0.69 pid: 74119 b: FISCHER q: 0 st: lt: 3 ean: 4006209407004 sr: FISCHER 40700 sr_no_br: 40700 sr_no_br_cl: 40700 sr_cl: FISCHER40700 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 8 mm Effective length 30/40 mm Overall length 91 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M8 n: FISCHER 40700 rapid-action anchor FBN II 8/30 electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing for flexible use in non-cracked concrete The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside. The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 8/30 electrolytically galvanised steel kpn: 40700 kpn_dash: kpn_clear: 40700 bkpn: FISCHER 40700 bkpn_clear: FISCHER 40700 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 40700 sr_ns: FISCHER40700
r: 02671106 p: 0.68 pid: 15439 b: FISCHER q: 0 st: lt: 6 ean: 4006209886786 sr: FISCHER 88678 sr_no_br: 88678 sr_no_br_cl: 88678 sr_cl: FISCHER88678 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 10 mm Application General type (screw head) PZ3 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 182 mm n: FISCHER 88678 frame plug F 10 M 152 electrolytically galvanised steel cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The screw fixing with countersunk head for the stress-free installation of window and door frames. The fischer metal frame fixing F-M is a special plug for the stress-free, lasting stand-off installation of window and door frames and of squared timbers. It consists of a metal sleeve and a zinc-plated steel screw. The F-M is set in a time-saving push-through installation. When the screw is tightened, the cone is pulled into the plug sleeve and expands against the wall of the drill hole. This ensures a fixation that is free from tensile force and pressure, thus guaranteeing a secure hold in solid and hollow building materials. The F-M is tested for fire resistance class R120, and offers safety for fire-protection-relevant applications. The F-M metal frame plug achieves fire resistance R 120. This allows for use in areas where fire resistance is relevant The operating principle prevents the window frame from being pulled against the substrate, and ensures a stress-free and long-lasting fixing of the frame The special plug geometry anchors the metal and plastic profiles against compressive and tensile loads, and allows for a secure hold of the window frame The cover caps (available separately) can be used to discreetly cover the screw heads Suitable for The F-M is suitable for push-through installation By tightening the screw, the cone is drawn into the sleeve and the fixing is expanded which wedges it inside the drill hole. The window frames are thus fixed in a stress-free manner The maximum installation torque is 5 Nm Building materials Concrete Vertically perforated brick Hollow blocks made from lightweight concrete Perforated sand-lime brick Solid sand-lime brick Aerated concrete Solid brick made from lightweight concrete Solid brick Application Window frames Door frames Squared timbers ds: dsc: kts: frame plug F 10 M 152 electrolytically galvanised steel kpn: 88678 kpn_dash: kpn_clear: 88678 bkpn: FISCHER 88678 bkpn_clear: FISCHER 88678 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 88678 sr_ns: FISCHER88678
r: 02359625 p: 0.66 pid: 176188 b: FISCHER q: 0 st: lt: 6 ean: 4048962013535 sr: FISCHER 502456 sr_no_br: 502456 sr_no_br_cl: 502456 sr_cl: FISCHER502456 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 52 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40; HEX 13 mm Drilling diameter 10 mm n: FISCHER 502456 construction plug SXR 10 x 52 FUS hexagon head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The efficient with short expansion element The fischer frame fixing SXR-FUS is a plug made of high-quality nylon along with the fischer hexagonal screw and moulded washer. Due to the special plug geometry, the SXR can be used in solid and hollow building materials. Due to the low anchorage depth of only 50 mm, the frame fixing can be handled in an especially cost-effective manner for multiple fixing of non-load-bearing systems. The fischer frame fixing SXR-FUS is particularly recommended with the hexagonal screw and moulded washer for fixing metal constructions. Low anchorage depth saves time and costs ETA approval in concrete and masonry With safety screw with hexagonal head and moulded washer Plug expands in solid building materials The plug anchors itself in the cavity in perforated building materials The special functioning allows for use in solid and hollow building materials with an anchorage depth of just 50 mm, ensuring an economical fixing The ETA assessment covers use in a range of solid and hollow building materials, and guarantees a secure fixing The specially developed combination of plugs and screws ensures the very best handling. The plug has a noticeable hold, making installation more convenient The extensive range offers the right plug for every fixing Suitable for The SXR is suitable for push-through installation The SXR expands in solid building materials In hollow building materials the loads are transferred in the area of the block fillets With vertically perforated bricks, only use rotary drilling (no impact drilling) Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Concrete >= C12/15 Vertically perforated brick Hollow blocks made from lightweight concrete Perforated sand-lime brick Solid sand-lime brick Aerated concrete Solid block made from lightweight and normal weight concrete Solid brick Thermal insulation blocks Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXR 10 x 52 FUS hexagon head kpn: 502456 kpn_dash: kpn_clear: 502456 bkpn: FISCHER 502456 bkpn_clear: FISCHER 502456 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 502456 sr_ns: FISCHER502456
r: 87051105 p: 0.65 pid: 74420 b: FISCHER q: 0 st: lt: 4 ean: 4006209406694 sr: FISCHER 40669 sr_no_br: 40669 sr_no_br_cl: 40669 sr_cl: FISCHER40669 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 8 mm Effective length 20/30 mm Overall length 81 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M8 n: FISCHER 40669 rapid-action anchor FBN II 8/20 electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing for flexible use in non-cracked concrete The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside. The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 8/20 electrolytically galvanised steel kpn: 40669 kpn_dash: kpn_clear: 40669 bkpn: FISCHER 40669 bkpn_clear: FISCHER 40669 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 40669 sr_ns: FISCHER40669
r: 02907516 p: 0.65 pid: 176078 b: FISCHER q: 0 st: lt: 15 ean: 4048962265248 sr: FISCHER 538663 sr_no_br: 538663 sr_no_br_cl: 538663 sr_cl: FISCHER538663 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Hole diameter 8,5 mm n: FISCHER 538663 clamping plate HK 31 8.5 cn: CLAMPING PLATE cn2: CLAMPING PLATE cn_clear: CLAMPINGPLATE d: Product description Connector - Channel washer HK 31 The fischer connector channel washer HK 31 has special retaining lugs that make it easier to achieve a strong, positive-fit connection, even in the case of suspended channels. The retaining lugs enable easy installation longitudinally and transverse to the mounting channel profile FLS. fischer offers the channel washer with standard 8. 5 mm and 10. 5 mm perforations. These allow an easy and precise installation process and thus save time and money. The galvanised zinc version is suitable for installation in buildings. The fire protection certificate provides added safety in the case of the channel washer. Channel washre for stable direct mounting of FLS channels to the substrate or for rigid attachment of pipe clamps to FLS rails using FSM Clix Form-fit connection with the FLS channel due to laterally curved contours Application-specific corrosion protection through galvanisation For use in dry interior areas Fire protection test R120 MLAR R30 sample cable system test The special retaining brackets at the SV connecting elements enable a form-locking installation longitudinal and transverse to the channel direction to adapt the channel connection effectively The standardised slots of the Channel washer enable an exact push-through connection of FLS mounting channels easy and fast Application The Channel washer HK 31 is used for stable connections and to strengthen the FLS profile for a fixing to the substrate For use in dry interior areas ds: dsc: kts: clamping plate HK 31 8.5 kpn: 538663 kpn_dash: kpn_clear: 538663 bkpn: FISCHER 538663 bkpn_clear: FISCHER 538663 c_path: Home / Fasteners and machine components / Fasteners / Rails and mounting / Clamping plate | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer rails and mounting / Fischer clamping plate sr_no_br_cl_ns: 538663 sr_ns: FISCHER538663
r: 02907517 p: 0.65 pid: 176119 b: FISCHER q: 0 st: lt: 15 ean: 4048962265255 sr: FISCHER 538664 sr_no_br: 538664 sr_no_br_cl: 538664 sr_cl: FISCHER538664 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Hole diameter 10,5 mm n: FISCHER 538664 clamping plate HK 31 10.5 cn: CLAMPING PLATE cn2: CLAMPING PLATE cn_clear: CLAMPINGPLATE d: Product description Connector - Channel washer HK 31 The fischer connector channel washer HK 31 has special retaining lugs that make it easier to achieve a strong, positive-fit connection, even in the case of suspended channels. The retaining lugs enable easy installation longitudinally and transverse to the mounting channel profile FLS. fischer offers the channel washer with standard 8. 5 mm and 10. 5 mm perforations. These allow an easy and precise installation process and thus save time and money. The galvanised zinc version is suitable for installation in buildings. The fire protection certificate provides added safety in the case of the channel washer. Channel washre for stable direct mounting of FLS channels to the substrate or for rigid attachment of pipe clamps to FLS rails using FSM Clix Form-fit connection with the FLS channel due to laterally curved contours Application-specific corrosion protection through galvanisation For use in dry interior areas Fire protection test R120 MLAR R30 sample cable system test The special retaining brackets at the SV connecting elements enable a form-locking installation longitudinal and transverse to the channel direction to adapt the channel connection effectively The standardised slots of the Channel washer enable an exact push-through connection of FLS mounting channels easy and fast Application The Channel washer HK 31 is used for stable connections and to strengthen the FLS profile for a fixing to the substrate For use in dry interior areas ds: dsc: kts: clamping plate HK 31 10.5 kpn: 538664 kpn_dash: kpn_clear: 538664 bkpn: FISCHER 538664 bkpn_clear: FISCHER 538664 c_path: Home / Fasteners and machine components / Fasteners / Rails and mounting / Clamping plate | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer rails and mounting / Fischer clamping plate sr_no_br_cl_ns: 538664 sr_ns: FISCHER538664
r: 02671094 p: 0.64 pid: 15436 b: FISCHER q: 0 st: lt: 14 ean: 4006209886625 sr: FISCHER 88662 sr_no_br: 88662 sr_no_br_cl: 88662 sr_cl: FISCHER88662 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 8 mm Application General type (screw head) PZ2 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 92 mm n: FISCHER 88662 frame plug F 8 M 92 electrolytically galvanised steel cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The screw fixing with lenticular flange head for the stress-free installation of window and door frames. The fischer metal frame fixing F-M is a special plug for the stress-free, lasting stand-off installation of window and door frames and of squared timbers. It consists of a metal sleeve and a zinc-plated steel screw. The F-M is set in a time-saving push-through installation. When the screw is tightened, the cone is pulled into the plug sleeve and expands against the wall of the drill hole. This ensures a fixation that is free from tensile force and pressure, thus guaranteeing a secure hold in solid and hollow building materials. The F-M is tested for fire resistance class R120, and offers safety for fire-protection-relevant applications. The F-M metal frame plug achieves fire resistance R 120. This allows for use in areas where fire resistance is relevant The operating principle prevents the window frame from being pulled against the substrate, and ensures a stress-free and long-lasting fixing of the frame The special plug geometry anchors the metal and plastic profiles against compressive and tensile loads, and allows for a secure hold of the window frame The cover caps (available separately) can be used to discreetly cover the screw heads Suitable for The F-M is suitable for push-through installation By tightening the screw, the cone is drawn into the sleeve and the fixing is expanded which wedges it inside the drill hole. The window frames are thus fixed in a stress-free manner The maximum installation torque is 5 Nm Building materials Concrete Vertically perforated brick Hollow blocks made from lightweight concrete Perforated sand-lime brick Solid sand-lime brick Aerated concrete Solid brick made from lightweight concrete Solid brick Application Window frames Door frames Squared timbers ds: dsc: kts: frame plug F 8 M 92 electrolytically galvanised steel kpn: 88662 kpn_dash: kpn_clear: 88662 bkpn: FISCHER 88662 bkpn_clear: FISCHER 88662 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 88662 sr_ns: FISCHER88662
r: 02019771 p: 0.63 pid: 15977 b: FISCHER q: 0 st: lt: 8 ean: 4006209460221 sr: FISCHER 46022 sr_no_br: 46022 sr_no_br_cl: 46022 sr_cl: FISCHER46022 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 6 mm Effective length 10 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M8 n: FISCHER 46022 nail anchor FNA II 6x30/10 M6 nut electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The installation-friendly Hammerset anchor with thread and flange nut for multiple fixings. The fischer nail anchor FNA II 6 with thread and flange nut is made of zinc-plated steel. The FNA II is set in a time-saving manner in the push-through or pre-positioned installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail anchor FNA II with thread and flange nut is suitable for fixing metal clamps for conduits and pipes in internal areas. Hammerset installation saves time No reinforcement hits due to low anchorage depth This saves time and costs during series installation Expansion clip provides a firm hold ETA approval for multiple fixings Easy removal of fire protection board without damage Reusability of fire protection board Safe anchorage, particularly when exposed to vibration, wind, and pushing/pulling influences Low anchoring depth (30 mm) Convenient installation without torque-controlled setting tool Approved system that has proven itself one million times over Suitable for The washer significantly increases the pulling forces and, at the same time, prevents the damage of the panel during removal Removal by means of easy pinching off of nail head thanks to special 2-stage pliers For fast installation, use the compressed air setting device (item no. 093731) Building materials Concrete C12/15 to C50/60, cracked and non-cracked For multi-point fixings of non-load-bearing systems Application Fire protection plates Fire protection boards Ventilation systems Wire and Nonius hangers Mounting rails Metal clamps Substructures made of wood and metal ds: dsc: kts: nail anchor FNA II 6x30/10 M6 nut electrolytically galvanised steel kpn: 46022 kpn_dash: kpn_clear: 46022 bkpn: FISCHER 46022 bkpn_clear: FISCHER 46022 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 46022 sr_ns: FISCHER46022
