r: 02776803 p: 1.11 pid: 22102 b: FISCHER q: 0 st: lt: 8 ean: 4048962251654 sr: FISCHER 536882 sr_no_br: 536882 sr_no_br_cl: 536882 sr_cl: FISCHER536882 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 8 mm Max. useful length 40 mm Length 90 mm n: FISCHER 536882 concrete screw FBS II 8x90 40/25 countersunk head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 8x90 40/25 countersunk head kpn: 536882 kpn_dash: kpn_clear: 536882 bkpn: FISCHER 536882 bkpn_clear: FISCHER 536882 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536882 sr_ns: FISCHER536882
r: 02776750 p: 1.11 pid: 22007 b: FISCHER q: 0 st: lt: 4 ean: 4048962251388 sr: FISCHER 536855 sr_no_br: 536855 sr_no_br_cl: 536855 sr_cl: FISCHER536855 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 8 mm Length 100 mm Max. useful length 50 mm n: FISCHER 536855 concrete screw FBS II 8x100 50/35 hexagon head with TX shank cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 8x100 50/35 hexagon head with TX shank kpn: 536855 kpn_dash: kpn_clear: 536855 bkpn: FISCHER 536855 bkpn_clear: FISCHER 536855 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536855 sr_ns: FISCHER536855
r: 02776804 p: 1.11 pid: 20715 b: FISCHER q: 0 st: lt: 8 ean: 4048962251678 sr: FISCHER 536884 sr_no_br: 536884 sr_no_br_cl: 536884 sr_cl: FISCHER536884 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Max. useful length 10 mm Length 65 mm n: FISCHER 536884 concrete screw FBS II 10x65 10/- countersunk head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 10x65 10/- countersunk head kpn: 536884 kpn_dash: kpn_clear: 536884 bkpn: FISCHER 536884 bkpn_clear: FISCHER 536884 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536884 sr_ns: FISCHER536884
r: 08096853 p: 1.09 pid: 176254 b: FISCHER q: 0 st: lt: 8 ean: 4048962462012 sr: FISCHER 564576 sr_no_br: 564576 sr_no_br_cl: 564576 sr_cl: FISCHER564576 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 8 mm Effective length 50 mm Overall length 115 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M8 n: FISCHER 564576 Piercing anchor FAZ II Plus 8/50 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 8/50 EV electrolytically galvanised steel kpn: 564576 kpn_dash: kpn_clear: 564576 bkpn: FISCHER 564576 bkpn_clear: FISCHER 564576 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564576 sr_ns: FISCHER564576
r: 83980875 p: 1.09 pid: 16015 b: FISCHER q: 0 st: lt: 8 ean: 4006209685266 sr: FISCHER 68526 sr_no_br: 68526 sr_no_br_cl: 68526 sr_cl: FISCHER68526 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 76 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 12 mm n: FISCHER FSA 12x70/10 S sleeve anchor with hex bolt electrolytically zinc plated - 68526 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with hexagonal screw for structural fixings in non-cracked concrete. The fischer sleeve anchor FSA-S is a zinc-plated steel anchor with hexagonal screw for structural fixings. The FSA-S is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-S is ideal for fastening fixings that are not relevant in safety terms such as consoles, handrails, or cable trays. Simple alignment due to optimised anchor geometry, even in narrow spaces Surface flush removal due to detachable screw connection With hexagon screw The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B) The detachable screw connection allows for surface flush removal Suitable for The FSA is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base Building materials Suitable for: Concrete C12/15 to C20/25, non-cracked Natural stone with dense structure Application Handrails Consoles Ladders Cable trays Gates Façades Temporary or structural fixings ds: dsc: kts: sleeve anchor with hex bolt electrolytically zinc plated kpn: FSA 12x70/10 S kpn_dash: kpn_clear: FSA12x7010S bkpn: FISCHER FSA 12x70/10 S bkpn_clear: FISCHER FSA12x7010S c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 68526 sr_ns: FISCHER68526
r: 08096953 p: 1.08 pid: 176358 b: FISCHER q: 0 st: lt: 8 ean: 4048962462982 sr: FISCHER 564673 sr_no_br: 564673 sr_no_br_cl: 564673 sr_cl: FISCHER564673 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 20 mm Overall length 85 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M10 n: FISCHER 564673 Piercing anchor FAZ II Plus 10/20 K EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 10/20 K EV electrolytically galvanised steel kpn: 564673 kpn_dash: kpn_clear: 564673 bkpn: FISCHER 564673 bkpn_clear: FISCHER 564673 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564673 sr_ns: FISCHER564673
r: 02776757 p: 1.06 pid: 22092 b: FISCHER q: 0 st: lt: 8 ean: 4048962251425 sr: FISCHER 536859 sr_no_br: 536859 sr_no_br_cl: 536859 sr_cl: FISCHER536859 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Max. useful length 15 mm Length 70 mm n: FISCHER 536859 concrete screw FBS II 10x70 15/5/- hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 10x70 15/5/- hexagon head kpn: 536859 kpn_dash: kpn_clear: 536859 bkpn: FISCHER 536859 bkpn_clear: FISCHER 536859 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536859 sr_ns: FISCHER536859
r: 02019788 p: 1.06 pid: 17171 b: FISCHER q: 0 st: lt: 8 ean: 4006209441183 sr: FISCHER 44118 sr_no_br: 44118 sr_no_br_cl: 44118 sr_cl: FISCHER44118 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Material Steel Surface treatment Zinc plated Length 110 mm Effective length 75 mm Head diameter 13 mm Drilling diameter 6 mm n: FISCHER 44118 nail anchor FNA II 6x30/75 with nail head electrolytically galvanised cn: DROP-IN ANCHOR cn2: DROP-IN ANCHOR cn_clear: DROPINANCHOR d: Product description The installation-friendly Hammerset anchor for multiple fixings. The fischer nail anchor FNA II 6 with nail head is made of zinc-plated steel. The FNA II is set in a time-saving manner in the push-through installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail anchor FNA II 6 with nail head is suitable for fixing fire protection boards, wire and nonious hangers in internal areas. Hammerset installation saves time No reinforcement hits due to low anchorage depth This saves time and costs during series installation Expansion clip provides a firm hold ETA approval for multiple fixings Series installation possible with setting tool for the hammer drill. This saves time and costs The special active principle allows for a simple hammerset installation and, therefore, a short processing time The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use Suitable for The FNA II with nail head is suitable for push-through installation. The FNA II M6 is suitable for pre-positioned and pushthrough installation. The FNA II OE and Hare suitable for pre-positioned installation The installed nail anchor FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall Available setting tools:FNA S-SBO to slip onto the drill,FNA S-SDS for series installation with a drilling hammer,FNA S-H for the manual installation of mounting rails Building materials Approved for: Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications Also suitable for: Solid sand-lime brick Natural stone with dense structure Prestressed hollow-core concrete slabs Application Fire protection plates Fire protection boards Ventilation systems Wire and nonious hangers Mounting rails Metal clamps Substructures made of wood and metal ds: dsc: kts: nail anchor FNA II 6x30/75 with nail head electrolytically galvanised kpn: 44118 kpn_dash: kpn_clear: 44118 bkpn: FISCHER 44118 bkpn_clear: FISCHER 44118 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Drop-in anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer drop-in anchor sr_no_br_cl_ns: 44118 sr_ns: FISCHER44118
r: 08096968 p: 1.06 pid: 176364 b: FISCHER q: 0 st: lt: 8 ean: 4048962462715 sr: FISCHER 564646 sr_no_br: 564646 sr_no_br_cl: 564646 sr_cl: FISCHER564646 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 10 mm Overall length 95 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M10 n: FISCHER 564646 Piercing anchor FAZ II Plus 10/10 GS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 10/10 GS EV electrolytically galvanised steel kpn: 564646 kpn_dash: kpn_clear: 564646 bkpn: FISCHER 564646 bkpn_clear: FISCHER 564646 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564646 sr_ns: FISCHER564646
r: 02867945 p: 1.03 pid: 175988 b: FISCHER q: 0 st: lt: 15 ean: 4048962265040 sr: FISCHER 538643 sr_no_br: 538643 sr_no_br_cl: 538643 sr_cl: FISCHER538643 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 538643 slide nut FSM Clix P 6 cn: SLIDING NUT cn2: SLIDING NUT cn_clear: SLIDINGNUT d: Product description Sliding nut for quick and easy connection of FLS mounting rails The fischer channel nut FSM Clix P quickly and easily connects the rails with each other and to the substrate with the construction elements SV and MW in the FLS mounting rails. The channel nut FSM Clix P is securely fixed by means of a 90° rotation. The contact tongue and the pronounced teeth of the channel nut make the installation process easier. fischer offers the FSM Clix P in the sizes M6, M8, and M10. The galvanised zinc version is suitable for installation in buildings. The fire protection certificate offers added safety. Quick assembly by 90° rotation of the sliding nut in the rail Simple creation of rail constructions in connection with FLS channels Application-appropriate corrosion protection through electrogalvanisation For use in dry interior areas Fire protection test R120 MLAR R30 sample cable system test The special and disappearing thrust block of the sliding nut Clix P plastic holder enables a connection of connecting elements and channels without plastic interlayer to establish a safe longitudinal metallic connection The especially developed spring leg on the FSM Clix P guarantees the necessary contact pressure of the connector to the channel to help for a secure adjustment during installation The teeth on the sliding nut enable an exact and secure positioning in the FLS channel and ease the installation of connector elements The unique stop element on the FSM Clix P connector guarantees the accurate 90°-turn of the connectors in the channel to ensure a save and precise installation Application FSM Clix P is suitable for interconnecting FLS channels by using connecting elements For use in dry interior areas ds: dsc: kts: slide nut FSM Clix P 6 kpn: 538643 kpn_dash: kpn_clear: 538643 bkpn: FISCHER 538643 bkpn_clear: FISCHER 538643 c_path: Home / Fasteners and machine components / Fasteners / Rails and mounting / Sliding nut | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer rails and mounting / Fischer sliding nut sr_no_br_cl_ns: 538643 sr_ns: FISCHER538643
r: 02907476 p: 1.03 pid: 176076 b: FISCHER q: 0 st: lt: 8 ean: 4048962265101 sr: FISCHER 538649 sr_no_br: 538649 sr_no_br_cl: 538649 sr_cl: FISCHER538649 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 538649 slide nut FSM Clix P 10 cn: SLIDING NUT cn2: SLIDING NUT cn_clear: SLIDINGNUT d: Product description Sliding nut for quick and easy connection of FLS mounting rails The fischer channel nut FSM Clix P quickly and easily connects the rails with each other and to the substrate with the construction elements SV and MW in the FLS mounting rails. The channel nut FSM Clix P is securely fixed by means of a 90° rotation. The contact tongue and the pronounced teeth of the channel nut make the installation process easier. fischer offers the FSM Clix P in the sizes M6, M8, and M10. The galvanised zinc version is suitable for installation in buildings. The fire protection certificate offers added safety. Quick assembly by 90° rotation of the sliding nut in the rail Simple creation of rail constructions in connection with FLS channels Application-appropriate corrosion protection through electrogalvanisation For use in dry interior areas Fire protection test R120 MLAR R30 sample cable system test The special and disappearing thrust block of the sliding nut Clix P plastic holder enables a connection of connecting elements and channels without plastic interlayer to establish a safe longitudinal metallic connection The especially developed spring leg on the FSM Clix P guarantees the necessary contact pressure of the connector to the channel to help for a secure adjustment during installation The teeth on the sliding nut enable an exact and secure positioning in the FLS channel and ease the installation of connector elements The unique stop element on the FSM Clix P connector guarantees the accurate 90°-turn of the connectors in the channel to ensure a save and precise installation Application FSM Clix P is suitable for interconnecting FLS channels by using connecting elements For use in dry interior areas ds: dsc: kts: slide nut FSM Clix P 10 kpn: 538649 kpn_dash: kpn_clear: 538649 bkpn: FISCHER 538649 bkpn_clear: FISCHER 538649 c_path: Home / Fasteners and machine components / Fasteners / Rails and mounting / Sliding nut | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer rails and mounting / Fischer sliding nut sr_no_br_cl_ns: 538649 sr_ns: FISCHER538649
r: 08134129 p: 1.03 pid: 176398 b: FISCHER q: 0 st: lt: 8 ean: 4048962267433 sr: FISCHER 539026 sr_no_br: 539026 sr_no_br_cl: 539026 sr_cl: FISCHER539026 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Length (Wall plug) 50 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Cavity wall plug With screw Yes With collar No Application General n: FISCHER 539026 Hollow wall plug DuoTec 10 S PH with round head screw cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The assembly-friendly solution for heavy loads in sheet metal. A combination of two material components for more power. The flange sleeve reinforces the drill hole and enables significantly higher transverse forces. The curved handle enables obstacle detection before starting assembly. The flexible screw fastening allows the use of screws and hooks with different thread shapes. The fibreglass-reinforced plastic and metal insert ensure the absorption of high tensile and transverse forces in all types of sheet material. The soft, grey nylon contact side distributes the load over the entire sheet surface, minimising any weakening of the supporting building material. Common borehole diameters and a short rocker element ensure easy installation even in small or insulated hollow spaces. The white flange sleeve with locking function ensures fast and secure mounting of the plug in the drilled hole. With scale on the band for determining the required screw length (scale value + 20 mm). The unique functioning and the geometry of the fischer DuoTec plug allow for extremely heavy loads for rocker plugs. This reduces the number of fasteners in multiple fastenings and maximises safety. As part of the DuoLine, the DuoTec consists of two plastic components. The red and hard component of the plug's sleeve enables the uniform distribution of the load, while the grey and white prevent damage to the surface of the board during fastening and thus a load reduction. In applications in board materials, which have a hollow space behind them, the DuoTec is applied as a tumbling plug. In solid building materials, the plug can also be used as a spreader plug. Applications Suspended kitchen cabinets Wall cabinets Bookshelves Wardrobes Handrails Paintings Mirrors Lamps Heavy hanging baskets Building materials Suitable for: Plasterboard Gypsum fibreboard Wooden panels (e.g. OSB, chipboard, MDF, etc.) Steel plate Plastic sheets Concrete hollow brick Also suitable for: Solid materials such as concrete and wood ds: dsc: Scope of delivery (per purchase of 10) 10x DuoTec 10 10x screw with cylinder head 5.0x 60 kts: Hollow wall plug DuoTec 10 S PH with round head screw kpn: 539026 kpn_dash: kpn_clear: 539026 bkpn: FISCHER 539026 bkpn_clear: FISCHER 539026 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 539026 sr_ns: FISCHER539026
r: 02896185 p: 1.03 pid: 176092 b: FISCHER q: 50 st: 1 lt: 1 ean: 4048962265088 sr: FISCHER 538647 sr_no_br: 538647 sr_no_br_cl: 538647 sr_cl: FISCHER538647 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 538647 slide nut FSM Clix P 8 cn: SLIDING NUT cn2: SLIDING NUT cn_clear: SLIDINGNUT d: Product description Sliding nut for quick and easy connection of FLS mounting rails The fischer channel nut FSM Clix P quickly and easily connects the rails with each other and to the substrate with the construction elements SV and MW in the FLS mounting rails. The channel nut FSM Clix P is securely fixed by means of a 90° rotation. The contact tongue and the pronounced teeth of the channel nut make the installation process easier. fischer offers the FSM Clix P in the sizes M6, M8, and M10. The galvanised zinc version is suitable for installation in buildings. The fire protection certificate offers added safety. Quick assembly by 90° rotation of the sliding nut in the rail Simple creation of rail constructions in connection with FLS channels Application-appropriate corrosion protection through electrogalvanisation For use in dry interior areas Fire protection test R120 MLAR R30 sample cable system test The special and disappearing thrust block of the sliding nut Clix P plastic holder enables a connection of connecting elements and channels without plastic interlayer to establish a safe longitudinal metallic connection The especially developed spring leg on the FSM Clix P guarantees the necessary contact pressure of the connector to the channel to help for a secure adjustment during installation The teeth on the sliding nut enable an exact and secure positioning in the FLS channel and ease the installation of connector elements The unique stop element on the FSM Clix P connector guarantees the accurate 90°-turn of the connectors in the channel to ensure a save and precise installation Application FSM Clix P is suitable for interconnecting FLS channels by using connecting elements For use in dry interior areas ds: dsc: kts: slide nut FSM Clix P 8 kpn: 538647 kpn_dash: kpn_clear: 538647 bkpn: FISCHER 538647 bkpn_clear: FISCHER 538647 c_path: Home / Fasteners and machine components / Fasteners / Rails and mounting / Sliding nut | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer rails and mounting / Fischer sliding nut sr_no_br_cl_ns: 538647 sr_ns: FISCHER538647
r: 08096962 p: 1.02 pid: 176354 b: FISCHER q: 0 st: lt: 8 ean: 4048962463064 sr: FISCHER 564681 sr_no_br: 564681 sr_no_br_cl: 564681 sr_cl: FISCHER564681 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 10 mm Overall length 75 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M10 n: FISCHER 564681 Piercing anchor FAZ II Plus 10/10 K GS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus K GS with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the low anchorage depth and simple mounting, the FAZ II Plus K GS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Millimeter accurate adjustment to the loads due to the variable anchoring depths Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 10/10 K GS EV electrolytically galvanised steel kpn: 564681 kpn_dash: kpn_clear: 564681 bkpn: FISCHER 564681 bkpn_clear: FISCHER 564681 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564681 sr_ns: FISCHER564681
r: 02776749 p: 1.02 pid: 20695 b: FISCHER q: 0 st: lt: 8 ean: 4048962251371 sr: FISCHER 536854 sr_no_br: 536854 sr_no_br_cl: 536854 sr_cl: FISCHER536854 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 8 mm Length 90 mm Max. useful length 40 mm n: FISCHER 536854 concrete screw FBS II 8x90 40/25 hexagon head with TX recess cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 8x90 40/25 hexagon head with TX recess kpn: 536854 kpn_dash: kpn_clear: 536854 bkpn: FISCHER 536854 bkpn_clear: FISCHER 536854 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536854 sr_ns: FISCHER536854
r: 08096859 p: 1.01 pid: 176260 b: FISCHER q: 0 st: lt: 8 ean: 4048962462708 sr: FISCHER 564645 sr_no_br: 564645 sr_no_br_cl: 564645 sr_cl: FISCHER564645 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 8 mm Effective length 30 mm Overall length 95 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M8 n: FISCHER 564645 Piercing anchor FAZ II Plus 8/30 GS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Millimeter accurate adjustment to the loads due to the variable anchoring depths Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 8/30 GS EV electrolytically galvanised steel kpn: 564645 kpn_dash: kpn_clear: 564645 bkpn: FISCHER 564645 bkpn_clear: FISCHER 564645 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564645 sr_ns: FISCHER564645
r: 02890546 p: 1 pid: 176043 b: FISCHER q: 0 st: lt: 13 ean: 4006209902776 sr: FISCHER 90277 sr_no_br: 90277 sr_no_br_cl: 90277 sr_cl: FISCHER90277 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Length 175 mm n: FISCHER 90277 anchor rod FIS A M8 x 175 zinc plated 5.8 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The FIS A versatile rod anchor The fischer threaded rod FIS A is made from zinc-plated, steel grade 5. 8. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system. The system, made from zinc-plated threaded rods in conjunction with fischer injection mortars, is suitable and approved for fixings in dry interiors. The universal solution for various fischer injection mortars. For a manageable range and simpler storage Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various fischer injection mortars Optimum load adaptation due to variable anchorage depths. This lowers installation and material costs The anchor rod FIS A can be used with almost every fischer injection mortar (except Highbond special mortar FIS HB). It can be individually selected based on requirements, thus allowing for a wide range of applications The wide range of approved anchor rods FIS A from M6 to M30 allows for various applications Please refer to the approvals of the injection mortar used Suitable for The anchor rod FIS A is suitable for pre-positioned and push-through installation FIS A is set manually into the drill hole, by lightly rotating it until it reaches the drill hole base Building materials In connection with several fischer injection mortars the anchor rod FIS A is approved or suitable for different building materials Application Anchorings with each of the fischer injection mortars such as FIS V Plus, FIS V Zero, FIS PM, FIS SB, FIS EM Plus, FIS EB II, FIS V, FIS VL, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod FIS A M8 x 175 zinc plated 5.8 kpn: 90277 kpn_dash: kpn_clear: 90277 bkpn: FISCHER 90277 bkpn_clear: FISCHER 90277 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 90277 sr_ns: FISCHER90277
r: 08096969 p: 1 pid: 176338 b: FISCHER q: 100 st: 1 lt: 1 ean: 4048962462043 sr: FISCHER 564579 sr_no_br: 564579 sr_no_br_cl: 564579 sr_cl: FISCHER564579 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 10 mm Overall length 95 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M10 n: FISCHER 564579 Piercing anchor FAZ II Plus 10/10 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 10/10 EV electrolytically galvanised steel kpn: 564579 kpn_dash: kpn_clear: 564579 bkpn: FISCHER 564579 bkpn_clear: FISCHER 564579 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564579 sr_ns: FISCHER564579
r: 02890551 p: 1 pid: 176077 b: FISCHER q: 0 st: lt: 13 ean: 4006209902820 sr: FISCHER 90282 sr_no_br: 90282 sr_no_br_cl: 90282 sr_cl: FISCHER90282 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Drilling diameter 12 mm Length 200 mm n: FISCHER 90282 anchor rod FIS A M10 x 200 electrolytically zinc-plated 5.8 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The FIS A versatile rod anchor The fischer threaded rod FIS A is made from zinc-plated, steel grade 5. 8. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system. The system, made from zinc-plated threaded rods in conjunction with fischer injection mortars, is suitable and approved for fixings in dry interiors. The universal solution for various fischer injection mortars. For a manageable range and simpler storage Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various fischer injection mortars Optimum load adaptation due to variable anchorage depths. This lowers installation and material costs The anchor rod FIS A can be used with almost every fischer injection mortar (except Highbond special mortar FIS HB). It can be individually selected based on requirements, thus allowing for a wide range of applications The wide range of approved anchor rods FIS A from M6 to M30 allows for various applications Please refer to the approvals of the injection mortar used Suitable for The anchor rod FIS A is suitable for pre-positioned and push-through installation FIS A is set manually into the drill hole, by lightly rotating it until it reaches the drill hole base Building materials In connection with several fischer injection mortars the anchor rod FIS A is approved or suitable for different building materials Application Anchorings with each of the fischer injection mortars such as FIS V Plus, FIS V Zero, FIS PM, FIS SB, FIS EM Plus, FIS EB II, FIS V, FIS VL, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod FIS A M10 x 200 electrolytically zinc-plated 5.8 kpn: 90282 kpn_dash: kpn_clear: 90282 bkpn: FISCHER 90282 bkpn_clear: FISCHER 90282 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 90282 sr_ns: FISCHER90282
r: 02372263 p: 0.98 pid: 176187 b: FISCHER q: 0 st: lt: 8 ean: 4006209590645 sr: FISCHER 59064 sr_no_br: 59064 sr_no_br_cl: 59064 sr_cl: FISCHER59064 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 150 mm n: FISCHER 59064 Spacer screw ASL 6 x 150 electrolytically galvanised steel cn: STAND-OFF SCREW cn2: STAND-OFF SCREW cn_clear: STANDOFFSCREW d: Product description The spacing screw for flexible positioning and alignment of wooden fixtures The fischer spacing screw ASL is a special screw made of zinc-plated steel with two coordinated threads at the same pitch, allowing for precise and time-saving stand-off installation. The special screw is used in through-type installation. When driving in the screw, the external thread cuts into the pre-drilled fixture, and fixes it. If the screw is driven in at an angle of 15 - 30° then higher shear loads can be carried. The fischer spacing screw ASL is ideal for fixing timber window and door frames, cladding, and sub-constructions without plugs in wood and wood materials. Exact mounting even with attachments mounted at an angle Simple stand-off installation with two threads with the same pitch Fixing in solid building materials with fischer expansion plug SX Plus and in hollow building materials with fischer universal plug UX Flexible usage in wooden materials and wooden panels, as well as in solid mineral building materials and hollow mineral building materials The coordinated threads with the same pitch allow for the pin-point positioning and alignment of the fixture, which can even be mounted at an angle to the screw. This allows for an exact and flexible fixing During the installation, the fixture is not pulled onto the substrate, instead it is brought directly to the desired distance and position. This allows for a simple and exact installation When combined with SX Plus 8 and UX 8 plugs, it can be used in almost all wall materials, guaranteeing a secure fixing Suitable for The ASL is suitable for push-through installation Pre-drill the fixture at the desired angle in order to achieve the correct positioning and alignment When screwing in the screw, the external thread cuts into the pre-drilled fixture, and fixes it into the stipulated position The angled position of the screws (15° - 30°) allows high shear loads to be supported Building materials Without plug: suitable for wooden materials and wooden panels With SX Plus or UX pluall concrete and masonry materials Application Window frames Door frames Squared timbers Claddings Substructures made of wood ds: dsc: kts: Spacer screw ASL 6 x 150 electrolytically galvanised steel kpn: 59064 kpn_dash: kpn_clear: 59064 bkpn: FISCHER 59064 bkpn_clear: FISCHER 59064 c_path: Home / Fasteners and machine components / Fasteners / Screws / Stand-off screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer stand-off screw sr_no_br_cl_ns: 59064 sr_ns: FISCHER59064
