r: 08096959 p: 1.95 pid: 176296 b: FISCHER q: 0 st: lt: 8 ean: 4048962462098 sr: FISCHER 564584 sr_no_br: 564584 sr_no_br_cl: 564584 sr_cl: FISCHER564584 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 100 mm Overall length 185 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M10 n: FISCHER 564584 Piercing anchor FAZ II Plus 10/100 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 10/100 EV electrolytically galvanised steel kpn: 564584 kpn_dash: kpn_clear: 564584 bkpn: FISCHER 564584 bkpn_clear: FISCHER 564584 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564584 sr_ns: FISCHER564584
r: 02316677 p: 1.92 pid: 21656 b: FISCHER q: 0 st: lt: 8 ean: 4006209801796 sr: FISCHER 80179 sr_no_br: 80179 sr_no_br_cl: 80179 sr_cl: FISCHER80179 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 130 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Toggle plug With screw No Application Construction board type (screw head) Drilling diameter 20 mm n: FISCHER 80179 KDH 8 tumbler plug cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The cavity fixing with hook and wide transition beams for different board thicknesses. With the fischer toggle fixing KD components such as lights can be fixed in gypsum plasterboard and gypsum fibreboard, chipboard, and hollow ceilings made of brick and concrete. The toggle fixing is inserted into the drill hole in the pre-positioned installation and flips open independently when behind the board. This does not require a special installation tool and allows for a fast, convenient installation. High load capacity due to good load distribution on the transition beams High flexibility due to a long thread. Use with various panel thicknesses and attachment thicknesses No installation tool necessary With hook Universal fixing for fastenings in a wide range of drywall and hollow wall materials When the metal crosspiece is pushed. through the drill hole, pull it firmly against the inner wall cavity by tugging the plastic pull ring on the outer wall Afterwards cut the plastic legs off and fasten the fixture with e. g. a screw or screw in a hook or an eyebolt according to your demands Suitable for pre-positioned installation Suitable for The gravity and spring toggle are suitable for pre-positioned installation When placed in the drill hole, the bearing elements of the gravity and spring toggle independently swing open behind the board No special installation tool required. For a fast and convenient installation The KM10 is specially suited to fixing wash basins and urinals into installation and cavity walls Building materials Gypsum plasterboard and gypsum fibreboards Cavity floor slabs made from bricks and concrete Chipboard Plywood Application Pictures Lighting Light shelves Towel rails Mirror cabinets Light cabinets Cable and pipe clips ds: dsc: kts: KDH 8 tumbler plug kpn: 80179 kpn_dash: kpn_clear: 80179 bkpn: FISCHER 80179 bkpn_clear: FISCHER 80179 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 80179 sr_ns: FISCHER80179
r: 02890456 p: 1.89 pid: 176037 b: FISCHER q: 0 st: lt: 8 ean: 4048962181005 sr: FISCHER 522725 sr_no_br: 522725 sr_no_br_cl: 522725 sr_cl: FISCHER522725 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 180 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40; HEX 13 mm Drilling diameter 10 mm n: FISCHER 522725 construction plug SXRL 10 x 180 FUS hexagonal head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL FUS is approved along with the fischer hexagon head screw with moulded washer and integrated bit holder TX40 for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings of façade, ceiling and roof substructures made of metal. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 or 90 mm for SXRL 8 and SXRL 10 and 70 or 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 240 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 10 x 180 FUS hexagonal head kpn: 522725 kpn_dash: kpn_clear: 522725 bkpn: FISCHER 522725 bkpn_clear: FISCHER 522725 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 522725 sr_ns: FISCHER522725
r: 08096917 p: 1.87 pid: 176286 b: FISCHER q: 0 st: lt: 8 ean: 4048962462746 sr: FISCHER 564649 sr_no_br: 564649 sr_no_br_cl: 564649 sr_cl: FISCHER564649 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 20 mm Overall length 120 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M12 n: FISCHER 564649 Piercing anchor FAZ II Plus 12/20 GS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 12/20 GS EV electrolytically galvanised steel kpn: 564649 kpn_dash: kpn_clear: 564649 bkpn: FISCHER 564649 bkpn_clear: FISCHER 564649 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564649 sr_ns: FISCHER564649
r: 08096868 p: 1.86 pid: 176231 b: FISCHER q: 0 st: lt: 8 ean: 4048962462326 sr: FISCHER 564607 sr_no_br: 564607 sr_no_br_cl: 564607 sr_cl: FISCHER564607 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 6 mm Effective length 10 mm Overall length 65 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M6 n: FISCHER 564607 Piercing anchor FAZ II Plus 6/10 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands, now with even higher tensile strengths. Heavy loads can be secured in cracked concrete using the steel anchor. The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity. For example, the steel anchor is ideal for the anchoring of railings, cable trays, and consoles. Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Stainless steel: maximum safety for outdoor use Millimeter accurate adjustment to the loads due to the variable anchoring depths The first bolt anchor M6 with ETA evaluation option 1: for safe approved anchorages The tried-and-tested expansion clip ensures highest load capacity even with size M6 Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 6/10 R stainless steel kpn: 564607 kpn_dash: kpn_clear: 564607 bkpn: FISCHER 564607 bkpn_clear: FISCHER 564607 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564607 sr_ns: FISCHER564607
r: 02776768 p: 1.85 pid: 22018 b: FISCHER q: 0 st: lt: 8 ean: 4048962251487 sr: FISCHER 536865 sr_no_br: 536865 sr_no_br_cl: 536865 sr_cl: FISCHER536865 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Length 160 mm Max. useful length 105 mm n: FISCHER 536865 concrete screw FBS II 10x160 105/95/75 hexagonal head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 10x160 105/95/75 hexagonal head kpn: 536865 kpn_dash: kpn_clear: 536865 bkpn: FISCHER 536865 bkpn_clear: FISCHER 536865 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536865 sr_ns: FISCHER536865
r: 02870370 p: 1.82 pid: 176018 b: FISCHER q: 0 st: lt: 8 ean: 4048962153811 sr: FISCHER 518822 sr_no_br: 518822 sr_no_br_cl: 518822 sr_cl: FISCHER518822 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: For diameter 12 mm Physical state Solid Hazard class GHS05 Corrosive; GHS07 Harmful or irritant; GHS09 Environmental hazard H-statements H315; H317; H318; H335; H411 Conseils de prudence (P) P101; P102; P280; P305 + P351 + P338; P310 EUH-statements EUH208 Principal hazard property GHS05 Corrosive UN number UN3077 ADR class 9 ADR packing group III Flash point 100 °C n: FISCHER 518822 Superbond chemical capsule RSB 12 mini cn: CHEMICAL ANCHOR cn2: CHEMICAL ANCHOR cn_clear: CHEMICALANCHOR d: Product description The concrete all-rounder with two anchoring depths for high performance. The fischer resin capsule RSB mini contains a hybrid mortar based on styrene-free vinyl ester. The resin capsule is a system component of the fischer Superbond system for fixing in cracked and non-cracked concrete. The components are fixed with the fischer rod anchor RG M made of zinc-plated steel, made of stainless steel, and made of highly corrosion-resistant steel. The fischer anchor rod is set with the composite anchor setting tool through rotating and hitting motions using a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. With the fischer Superbond resin capsule objects such as heavy-duty steel constructions, soundproof walls, and high racks can be fixed. Higher load level due to use of two mortar cartridges. This saves on fixing points Cost-effective processing due to pre-portioning Processing possible up to -30 ° C Ideal for overhead installation Ideal for water-filled drill holes The pre-portioned resin capsule RSB is especially cost-effective for individual applications and overhead installations The ideal solution for difficult conditions and installations with no waiting time due to fast hardening: Approval-compliant processing down to -30°C, also approved for water-filled and diamond-drilled holes as well as for seismic applications in performance category C1 (only in conjunction with RG M) For each diameter, up to three anchorage depths can be realised with the threaded rod RG M through a combination of the resin capsules RSB mini The use of the internal threaded anchor RG M I enables the surface-flush removal of the fixture and the reuse of the fixing point The angular threaded rod RG M can be set for light dynamic loads with the resin capsule system RSB in sizes M12, M16, M20 and M24 in stainless steel R with the fischer filling set Suitable for The 2-component resin capsules RSB and RSB mini contain vinyl ester hybrid mortar with silane technology. They are suitable for pre-positioned installation During setting, the oblique edge of the anchoring element destroys the capsule, and mixes and activates the mortar The glass particles of the capsule body roughen the inside of the drill hole, which reduces the cleaning effort to just four blowing passes The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole Building materials Approved for anchorings in: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Natural stone with dense structure Application Heavy steel constructions Silo installations Tall shelving Sound barriers Guard rails Staircases ds: dsc: kts: Superbond chemical capsule RSB 12 mini kpn: 518822 kpn_dash: kpn_clear: 518822 bkpn: FISCHER 518822 bkpn_clear: FISCHER 518822 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Chemical anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer chemical anchor sr_no_br_cl_ns: 518822 sr_ns: FISCHER518822
r: 02873435 p: 1.81 pid: 175996 b: FISCHER q: 0 st: lt: 8 ean: 8001132944301 sr: FISCHER 94430 sr_no_br: 94430 sr_no_br_cl: 94430 sr_cl: FISCHER94430 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Drilling diameter 12 mm Overall length 75 mm Material Steel Surface treatment Zinc plated Safety anchor No n: FISCHER 94430 Channel anchor TA M8x75 EN electrolytically galvanised cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description Anchor for temporary fixing in hollow core concrete slabs without approval The fischer Hose anchor TA M NL is a sleeve anchor with female thread suitable for temporary fixing in hollow-core concrete slab floors. The optimized anchor geometry minimizes the energy required for installation. During assembly, the cone is pulled into the expansion sleeve, which then spreads into the wall of the channel. The triple spreading sleeve guarantees the even distribution of the load. After disassembly, no protruding parts remain in the drillhole, thus preventing the risk of accidents. Easy assembly due to small efforts during application Very suitable for temporary anchoring of struts in hollow-core slab floors No protruding parts after disassembly The fischer Hose anchor TA M-NL is suitable for use in hollow-core concrete slab elements with a thickness of >= 40 mm. The fischer Hulsanker TA M-NL is multifunctional and suitable for push-through installation. In addition, the anchor is detachable (sleeve stays behind in the channel plate). The anchor is available as standard in electrolytically galvanized steel Suitable for The TAM NL is suitable for push-through installation During tightening, the cone is pulled into the sleeve, so that it is clamped against the borehole wall The drilling process is decisive for the strength of the fastening. It is essential that the thickness of the shell is not further reduced by the concrete at the rear of the borehole. We first recommend to pre-drill 10 mm with a drill diameter and then drill with the specified drill diameter Building materials Suitable for: Concrete C12/15 Natural stone with dense structure Hollow core concrete slabs For fixing of: Temporary fixings like bracings Application Temporary fixings of braces in hollow core concrete slabs ds: dsc: kts: Channel anchor TA M8x75 EN electrolytically galvanised kpn: 94430 kpn_dash: kpn_clear: 94430 bkpn: FISCHER 94430 bkpn_clear: FISCHER 94430 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 94430 sr_ns: FISCHER94430
r: 02907555 p: 1.79 pid: 176073 b: FISCHER q: 0 st: lt: 8 ean: 4048962265231 sr: FISCHER 538661 sr_no_br: 538661 sr_no_br_cl: 538661 sr_cl: FISCHER538661 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 538661 hammer head screw FHS CLIX 10 x 100 cn: HAMMER HEAD BOLT cn2: HAMMER HEAD BOLT cn_clear: HAMMERHEADBOLT d: Product description Hammer-head bolt for quick and easy fixing in FLS channels The fischer T-head bolt FHS Clix is a fixing element for securely connecting pipe clamps with the fischer mounting channel system FLS. The T-head bolt FHS Clix is securely connected by means of a 90° rotation. The FHS Clix is available in the sizes M8 and M10 and in the lengths 30 to 100 mm. The special contact tongue on the FHS Clix ensures the required contact pressure of the fixing element in the FLS channel in order to ensure safe adjustment during assembly. In addition, the pronounced teeth in the channel nut enable precise and safe positioning in the FLS mounting channels and make the installation process easier. The galvanised zinc version is suitable for installation in buildings. The fire protection certificate provides added safety in the case of the channel nut. For easy connection of pipe clamps to FLS channels by means of grub screws and retaining claws Quick assembly by 90° rotation of the hammerhead screw in the rail Precise locking and secure hold of the FHS Clix in the rail due to serration of the sliding nut Fire protection test R120 MLAR R30 sample cable system test Application-appropriate corrosion protection through galvanisation For use in dry interior areas The special spring leg at the FHS Clix guarantees the necessary contact pressure of the connector to the channel to help for a secure adjustment during installation The teeth on the sliding nut enable an exact and secure positioning in the FLS channel and ease the installation of connector elements The clix-connector element with 90°-turn for connecting enables an easy post-installation in set channels to save time and money The especially developed stop element on the FHS Clix connector guarantees the accurate 90°-turn of the connectors in the channel to ensure a safe and precise installation Application FHS Clix is suitable for connecting pipe clamps with the channel For use in dry interior areas ds: dsc: kts: hammer head screw FHS CLIX 10 x 100 kpn: 538661 kpn_dash: kpn_clear: 538661 bkpn: FISCHER 538661 bkpn_clear: FISCHER 538661 c_path: Home / Fasteners and machine components / Fasteners / Bolts / Hammer head bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer bolts / Fischer hammer head bolt sr_no_br_cl_ns: 538661 sr_ns: FISCHER538661
r: 02873437 p: 1.77 pid: 176016 b: FISCHER q: 0 st: lt: 8 ean: 8001132944318 sr: FISCHER 94431 sr_no_br: 94431 sr_no_br_cl: 94431 sr_cl: FISCHER94431 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Drilling diameter 12 mm Overall length 90 mm Material Steel Surface treatment Zinc plated Safety anchor No n: FISCHER 94431 Channel anchor TA M8x90 EN electrolytically galvanised cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description Anchor for temporary fixing in hollow core concrete slabs without approval The fischer Hose anchor TA M NL is a sleeve anchor with female thread suitable for temporary fixing in hollow-core concrete slab floors. The optimized anchor geometry minimizes the energy required for installation. During assembly, the cone is pulled into the expansion sleeve, which then spreads into the wall of the channel. The triple spreading sleeve guarantees the even distribution of the load. After disassembly, no protruding parts remain in the drillhole, thus preventing the risk of accidents. Easy assembly due to small efforts during application Very suitable for temporary anchoring of struts in hollow-core slab floors No protruding parts after disassembly The fischer Hose anchor TA M-NL is suitable for use in hollow-core concrete slab elements with a thickness of >= 40 mm. The fischer Hulsanker TA M-NL is multifunctional and suitable for push-through installation. In addition, the anchor is detachable (sleeve stays behind in the channel plate). The anchor is available as standard in electrolytically galvanized steel Suitable for The TAM NL is suitable for push-through installation During tightening, the cone is pulled into the sleeve, so that it is clamped against the borehole wall The drilling process is decisive for the strength of the fastening. It is essential that the thickness of the shell is not further reduced by the concrete at the rear of the borehole. We first recommend to pre-drill 10 mm with a drill diameter and then drill with the specified drill diameter Building materials Suitable for: Concrete C12/15 Natural stone with dense structure Hollow core concrete slabs For fixing of: Temporary fixings like bracings Application Temporary fixings of braces in hollow core concrete slabs ds: dsc: kts: Channel anchor TA M8x90 EN electrolytically galvanised kpn: 94431 kpn_dash: kpn_clear: 94431 bkpn: FISCHER 94431 bkpn_clear: FISCHER 94431 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 94431 sr_ns: FISCHER94431
r: 02810680 p: 1.75 pid: 176013 b: FISCHER q: 0 st: lt: 8 ean: 4048962153804 sr: FISCHER 518821 sr_no_br: 518821 sr_no_br_cl: 518821 sr_cl: FISCHER518821 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: For diameter 10 Physical state Solid Hazard class GHS05 Corrosive; GHS07 Harmful or irritant; GHS09 Environmental hazard H-statements H315; H317; H318; H335; H411 Conseils de prudence (P) P101; P102; P280; P305 + P351 + P338; P310 EUH-statements EUH208 Principal hazard property GHS05 Corrosive UN number UN3077 ADR class 9 ADR packing group III Flash point 100 °C n: FISCHER 518821 Superbond chemical capsule RSB 10 cn: CHEMICAL ANCHOR cn2: CHEMICAL ANCHOR cn_clear: CHEMICALANCHOR d: Product description The concrete all-rounder with the best performance. The fischer resin capsule RSB contains a hybrid mortar based on styrene-free vinyl ester. The resin capsule is a system component of the fischer Superbond system for fixing in cracked and non-cracked concrete. The components are fixed using the fischer rod anchor RG M made of zinc-plated steel, made of stainless steel, and made of highly corrosion-resistant steel, as well as the fischer internal threaded anchor RG MI. The fischer anchor rod is set with the composite anchor setting tool through rotating and hitting motions using a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. With the fischer Superbond resin capsule objects such as heavy-duty steel constructions, soundproof walls, and high racks can be fixed. Cost-effective processing due to pre-portioning Processing possible up to -30 ° C Ideal for overhead installation Ideal for water-filled drill holes Less cleaning work, glass particles in the capsules rough up the drill hole wall The pre-portioned resin capsule RSB is especially cost-effective for individual applications and overhead installations The ideal solution for difficult conditions and installations with no waiting time due to fast hardening: Approval-compliant processing down to -30°C, also approved for water-filled and diamond-drilled holes as well as for seismic applications in performance category C1 (only in conjunction with RG M) For each diameter, up to three anchorage depths can be realised with the threaded rod RG M through a combination of the resin capsules RSB mini The use of the internal threaded anchor RG M I enables the surface-flush removal of the fixture and the reuse of the fixing point The angular threaded rod RG M can be set for light dynamic loads with the resin capsule system RSB in sizes M12, M16, M20 and M24 in stainless steel R with the fischer filling set Suitable for The 2-component resin capsules RSB and RSB mini contain vinyl ester hybrid mortar with silane technology. They are suitable for pre-positioned installation During setting, the oblique edge of the anchoring element destroys the capsule, and mixes and activates the mortar The glass particles of the capsule body roughen the inside of the drill hole, which reduces the cleaning effort to just four blowing passes The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole Building materials Approved for anchorings in: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Natural stone with dense structure Application Heavy steel constructions Silo installations Tall shelving Sound barriers Guard rails Staircases ds: dsc: kts: Superbond chemical capsule RSB 10 kpn: 518821 kpn_dash: kpn_clear: 518821 bkpn: FISCHER 518821 bkpn_clear: FISCHER 518821 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Chemical anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer chemical anchor sr_no_br_cl_ns: 518821 sr_ns: FISCHER518821
r: 02890430 p: 1.73 pid: 176027 b: FISCHER q: 0 st: lt: 8 ean: 4048962180794 sr: FISCHER 522704 sr_no_br: 522704 sr_no_br_cl: 522704 sr_cl: FISCHER522704 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 160 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40 Drilling diameter 10 mm n: FISCHER 522704 construction plug SXRL 10 x 180 T countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL-T is approved along with the fischer countersunk head screw with TX40 drive for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings in internal areas such as windows, coat racks, wall cupboards, or TV consoles. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 and 90 mm for SXRL 8 and SXRL 10 and 70 and 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 290 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 10 x 180 T countersunk head kpn: 522704 kpn_dash: kpn_clear: 522704 bkpn: FISCHER 522704 bkpn_clear: FISCHER 522704 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 522704 sr_ns: FISCHER522704
r: 08096943 p: 1.72 pid: 176346 b: FISCHER q: 0 st: lt: 8 ean: 4048962462081 sr: FISCHER 564583 sr_no_br: 564583 sr_no_br_cl: 564583 sr_cl: FISCHER564583 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 80 mm Overall length 165 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M10 n: FISCHER 564583 Piercing anchor FAZ II Plus 10/80 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 10/80 EV electrolytically galvanised steel kpn: 564583 kpn_dash: kpn_clear: 564583 bkpn: FISCHER 564583 bkpn_clear: FISCHER 564583 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564583 sr_ns: FISCHER564583
r: 08096939 p: 1.71 pid: 176279 b: FISCHER q: 0 st: lt: 8 ean: 4048962463149 sr: FISCHER 564689 sr_no_br: 564689 sr_no_br_cl: 564689 sr_cl: FISCHER564689 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 10 mm Overall length 109 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M12 n: FISCHER 564689 Piercing anchor FAZ II Plus 12/10 H EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With cap nut. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus H is the steel anchor for highest demands. The new sizes of the special cap nut version (M10 and M12) are also implemented in the ETA assessment and it is ideal for architecturally sophisticated applications. Thanks to variable anchorage depths and easy installation, the FAZ II Plus can be used in many different ways. The tried-and-trusted expansion clip securely feeds the loads into the concrete and ensures a high load-bearing-capacity. The FAZ II Plus H is the optimal solution (for example) for the anchorage of railings in visible areas: The cap nut, not only gives the option for a better and refined optical design but also, ensures an accident free installation due to its closed shape. Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The cap nut is implemented in the ETA assessment and it is ideal for architecturally sophisticated applications Due to its closed shape, the cap nut version ensures an accident free installation The cap nut is implemented in the ETA assessment and it is ideal for architecturally sophisticated applications Due to its closed shape, the cap nut version ensures an accident free installation Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus H is suitable for pre-positioned and push-through installation When applying the torque, the cone bolt is pulled into the expansion sleeve and expand it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Guard rails Consoles ds: dsc: kts: Piercing anchor FAZ II Plus 12/10 H EV electrolytically galvanised steel kpn: 564689 kpn_dash: kpn_clear: 564689 bkpn: FISCHER 564689 bkpn_clear: FISCHER 564689 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564689 sr_ns: FISCHER564689
r: 02019266 p: 1.71 pid: 10863 b: FISCHER q: 0 st: lt: 8 ean: 4006209902677 sr: FISCHER 90267 sr_no_br: 90267 sr_no_br_cl: 90267 sr_cl: FISCHER90267 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 6 mm Overall length 80 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 10 mm n: FISCHER TA M6 T/25 S sleeve anchor push-through assembly zinc plated - 90267 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The installation-friendly push-through anchor for fixings in non-cracked concrete. The fischer heavy-duty anchor TA M-T is a push-through anchor for time-saving through-type installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The heavy-duty anchor is ideal for fixing consoles, ladders, and steel constructions in non-cracked concrete. Simple assembly due to low setting energy Low axial and edge distances due to uniform load introduction ETA approval for non-cracked concrete The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M-T is extremely flexible The detachable screw connection allows for surface flush removal Suitable for The TA M-T is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Handrails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: sleeve anchor push-through assembly zinc plated kpn: TA M6 T/25 S kpn_dash: kpn_clear: TAM6T25S bkpn: FISCHER TA M6 T/25 S bkpn_clear: FISCHER TAM6T25S c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 90267 sr_ns: FISCHER90267
r: 02907552 p: 1.69 pid: 176069 b: FISCHER q: 0 st: lt: 8 ean: 4048962265224 sr: FISCHER 538660 sr_no_br: 538660 sr_no_br_cl: 538660 sr_cl: FISCHER538660 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 538660 hammer head screw FHS CLIX 10 x 60 cn: HAMMER HEAD BOLT cn2: HAMMER HEAD BOLT cn_clear: HAMMERHEADBOLT d: Product description Hammer-head bolt for quick and easy fixing in FLS channels The fischer T-head bolt FHS Clix is a fixing element for securely connecting pipe clamps with the fischer mounting channel system FLS. The T-head bolt FHS Clix is securely connected by means of a 90° rotation. The FHS Clix is available in the sizes M8 and M10 and in the lengths 30 to 100 mm. The special contact tongue on the FHS Clix ensures the required contact pressure of the fixing element in the FLS channel in order to ensure safe adjustment during assembly. In addition, the pronounced teeth in the channel nut enable precise and safe positioning in the FLS mounting channels and make the installation process easier. The galvanised zinc version is suitable for installation in buildings. The fire protection certificate provides added safety in the case of the channel nut. For easy connection of pipe clamps to FLS channels by means of grub screws and retaining claws Quick assembly by 90° rotation of the hammerhead screw in the rail Precise locking and secure hold of the FHS Clix in the rail due to serration of the sliding nut Fire protection test R120 MLAR R30 sample cable system test Application-appropriate corrosion protection through galvanisation For use in dry interior areas The special spring leg at the FHS Clix guarantees the necessary contact pressure of the connector to the channel to help for a secure adjustment during installation The teeth on the sliding nut enable an exact and secure positioning in the FLS channel and ease the installation of connector elements The clix-connector element with 90°-turn for connecting enables an easy post-installation in set channels to save time and money The especially developed stop element on the FHS Clix connector guarantees the accurate 90°-turn of the connectors in the channel to ensure a safe and precise installation Application FHS Clix is suitable for connecting pipe clamps with the channel For use in dry interior areas ds: dsc: kts: hammer head screw FHS CLIX 10 x 60 kpn: 538660 kpn_dash: kpn_clear: 538660 bkpn: FISCHER 538660 bkpn_clear: FISCHER 538660 c_path: Home / Fasteners and machine components / Fasteners / Bolts / Hammer head bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer bolts / Fischer hammer head bolt sr_no_br_cl_ns: 538660 sr_ns: FISCHER538660
r: 02890455 p: 1.62 pid: 176041 b: FISCHER q: 0 st: lt: 8 ean: 4048962180985 sr: FISCHER 522724 sr_no_br: 522724 sr_no_br_cl: 522724 sr_cl: FISCHER522724 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 160 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40; HEX 13 mm Drilling diameter 10 mm n: FISCHER 522724 construction plug SXRL 10 x 160 FUS hexagonal head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL FUS is approved along with the fischer hexagon head screw with moulded washer and integrated bit holder TX40 for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings of façade, ceiling and roof substructures made of metal. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 or 90 mm for SXRL 8 and SXRL 10 and 70 or 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 240 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 10 x 160 FUS hexagonal head kpn: 522724 kpn_dash: kpn_clear: 522724 bkpn: FISCHER 522724 bkpn_clear: FISCHER 522724 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 522724 sr_ns: FISCHER522724
r: 02890571 p: 1.61 pid: 176057 b: FISCHER q: 0 st: lt: 8 ean: 4048962153798 sr: FISCHER 518820 sr_no_br: 518820 sr_no_br_cl: 518820 sr_cl: FISCHER518820 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: For diameter 10 Physical state Solid Hazard class GHS05 Corrosive; GHS07 Harmful or irritant; GHS09 Environmental hazard H-statements H315; H317; H318; H335; H411 Conseils de prudence (P) P101; P102; P280; P305 + P351 + P338; P310 EUH-statements EUH208 Principal hazard property GHS05 Corrosive UN number UN3077 ADR class 9 ADR packing group III Flash point 100 °C n: FISCHER 518820 Superbond chemical capsule RSB 10 mini cn: CHEMICAL ANCHOR cn2: CHEMICAL ANCHOR cn_clear: CHEMICALANCHOR d: Product description The concrete all-rounder with two anchoring depths for high performance. The fischer resin capsule RSB mini contains a hybrid mortar based on styrene-free vinyl ester. The resin capsule is a system component of the fischer Superbond system for fixing in cracked and non-cracked concrete. The components are fixed with the fischer rod anchor RG M made of zinc-plated steel, made of stainless steel, and made of highly corrosion-resistant steel. The fischer anchor rod is set with the composite anchor setting tool through rotating and hitting motions using a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. With the fischer Superbond resin capsule objects such as heavy-duty steel constructions, soundproof walls, and high racks can be fixed. Higher load level due to use of two mortar cartridges. This saves on fixing points Cost-effective processing due to pre-portioning Processing possible up to -30 ° C Ideal for overhead installation Ideal for water-filled drill holes The pre-portioned resin capsule RSB is especially cost-effective for individual applications and overhead installations The ideal solution for difficult conditions and installations with no waiting time due to fast hardening: Approval-compliant processing down to -30°C, also approved for water-filled and diamond-drilled holes as well as for seismic applications in performance category C1 (only in conjunction with RG M) For each diameter, up to three anchorage depths can be realised with the threaded rod RG M through a combination of the resin capsules RSB mini The use of the internal threaded anchor RG M I enables the surface-flush removal of the fixture and the reuse of the fixing point The angular threaded rod RG M can be set for light dynamic loads with the resin capsule system RSB in sizes M12, M16, M20 and M24 in stainless steel R with the fischer filling set Suitable for The 2-component resin capsules RSB and RSB mini contain vinyl ester hybrid mortar with silane technology. They are suitable for pre-positioned installation During setting, the oblique edge of the anchoring element destroys the capsule, and mixes and activates the mortar The glass particles of the capsule body roughen the inside of the drill hole, which reduces the cleaning effort to just four blowing passes The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole Building materials Approved for anchorings in: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Natural stone with dense structure Application Heavy steel constructions Silo installations Tall shelving Sound barriers Guard rails Staircases ds: dsc: kts: Superbond chemical capsule RSB 10 mini kpn: 518820 kpn_dash: kpn_clear: 518820 bkpn: FISCHER 518820 bkpn_clear: FISCHER 518820 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Chemical anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer chemical anchor sr_no_br_cl_ns: 518820 sr_ns: FISCHER518820
r: 02907545 p: 1.6 pid: 176082 b: FISCHER q: 0 st: lt: 8 ean: 4048962265194 sr: FISCHER 538657 sr_no_br: 538657 sr_no_br_cl: 538657 sr_cl: FISCHER538657 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 538657 hammer head screw FHS CLIX 8 x 100 cn: HAMMER HEAD BOLT cn2: HAMMER HEAD BOLT cn_clear: HAMMERHEADBOLT d: Product description Hammer-head bolt for quick and easy fixing in FLS channels The fischer T-head bolt FHS Clix is a fixing element for securely connecting pipe clamps with the fischer mounting channel system FLS. The T-head bolt FHS Clix is securely connected by means of a 90° rotation. The FHS Clix is available in the sizes M8 and M10 and in the lengths 30 to 100 mm. The special contact tongue on the FHS Clix ensures the required contact pressure of the fixing element in the FLS channel in order to ensure safe adjustment during assembly. In addition, the pronounced teeth in the channel nut enable precise and safe positioning in the FLS mounting channels and make the installation process easier. The galvanised zinc version is suitable for installation in buildings. The fire protection certificate provides added safety in the case of the channel nut. For easy connection of pipe clamps to FLS channels by means of grub screws and retaining claws Quick assembly by 90° rotation of the hammerhead screw in the rail Precise locking and secure hold of the FHS Clix in the rail due to serration of the sliding nut Fire protection test R120 MLAR R30 sample cable system test Application-appropriate corrosion protection through galvanisation For use in dry interior areas The special spring leg at the FHS Clix guarantees the necessary contact pressure of the connector to the channel to help for a secure adjustment during installation The teeth on the sliding nut enable an exact and secure positioning in the FLS channel and ease the installation of connector elements The clix-connector element with 90°-turn for connecting enables an easy post-installation in set channels to save time and money The especially developed stop element on the FHS Clix connector guarantees the accurate 90°-turn of the connectors in the channel to ensure a safe and precise installation Application FHS Clix is suitable for connecting pipe clamps with the channel For use in dry interior areas ds: dsc: kts: hammer head screw FHS CLIX 8 x 100 kpn: 538657 kpn_dash: kpn_clear: 538657 bkpn: FISCHER 538657 bkpn_clear: FISCHER 538657 c_path: Home / Fasteners and machine components / Fasteners / Bolts / Hammer head bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer bolts / Fischer hammer head bolt sr_no_br_cl_ns: 538657 sr_ns: FISCHER538657
r: 02907560 p: 1.6 pid: 176079 b: FISCHER q: 0 st: lt: 15 ean: 4048962265286 sr: FISCHER 538667 sr_no_br: 538667 sr_no_br_cl: 538667 sr_cl: FISCHER538667 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Hole diameter 8,5 mm Angle 90 ° n: FISCHER 538667 universal bracket MWU 90° (8.5) cn: MOUNTING ANGLE BRACKET cn2: MOUNTING ANGLE BRACKET cn_clear: MOUNTINGANGLEBRACKET d: Product description Construction elements - mounting bracket MW 90 ° and MWU 90 ° The construction elements fischer mounting brackets MW 90° and MWU 90° along with the channel nut FSM Clix P create precise yet simple connections of mounting channels with each other or to the substrate. The special retaining lugs enable the precise insertion of the MW 90° longitudinally and transverse to the mounting channel profile FLS. The MWU can be directly secured to the substrate in a space-saving installation. The MW and MWU brackets have standard holes with an 8. 5 mm diameter in line with the FSM Clix P 8 and plugs with an 8 mm outer diameter. The galvanised zinc version is suitable for installation in buildings. Simple creation of rail constructions in connection with FLS channels and FSM Clix P Corrosion protection suitable for the application due to galvanisation For use in dry interior areas The long slot on flat wing of the MWU 90° angle bracket enables a direct connection to the substrate for space-saving fixation The standardised holes in the angle brackets enable an exact connection to the FLS channels by using FSM Clix P and a screw Application Connecting elements for the arrangement of simple channel constructions with the sliding channel nut FSM Clix P For use in dry interior areas ds: dsc: kts: universal bracket MWU 90° (8.5) kpn: 538667 kpn_dash: kpn_clear: 538667 bkpn: FISCHER 538667 bkpn_clear: FISCHER 538667 c_path: Home / Fasteners and machine components / Fasteners / Rails and mounting / Mounting angle bracket | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer rails and mounting / Fischer mounting angle bracket sr_no_br_cl_ns: 538667 sr_ns: FISCHER538667
