r: 08096879 p: 13.884 pid: 176239 b: FISCHER q: 0 st: lt: 10 ean: 4048962462548 sr: FISCHER 564629 sr_no_br: 564629 sr_no_br_cl: 564629 sr_cl: FISCHER564629 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 16 mm Effective length 60 mm Overall length 183 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M16 n: FISCHER 564629 piercing anchor FAZ II Plus 16/60 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easy assembly without the need for drill hole cleaning (M8-M24) Stainless steel: maximum safety for outdoor use Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs New ETA confirms the use of FAZ II Plus for the dynamic load of components for diameters M16-M24 under direct load Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: piercing anchor FAZ II Plus 16/60 R stainless steel kpn: 564629 kpn_dash: kpn_clear: 564629 bkpn: FISCHER 564629 bkpn_clear: FISCHER 564629 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564629 sr_ns: FISCHER564629
r: 02020576 p: 13.719 pid: 16003 b: FISCHER q: 0 st: lt: 8 ean: 4006209976197 sr: FISCHER 97619 sr_no_br: 97619 sr_no_br_cl: 97619 sr_cl: FISCHER97619 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Anchoring depth 95 mm Width across flats 17 mm Effective length 60 mm Drill hole depth 110 mm Drilling diameter 12 mm n: FISCHER 97619 highbond anchor FHB II-A L M10 x 95/60 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tension loads - even outdoors. The fischer Highbond rod anchor FHB II-A L is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, silos, and heavy steel constructions are securely installed within external areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M10 x 95/60 stainless steel A4 kpn: 97619 kpn_dash: kpn_clear: 97619 bkpn: FISCHER 97619 bkpn_clear: FISCHER 97619 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97619 sr_ns: FISCHER97619
r: 02020545 p: 13.553 pid: 17078 b: FISCHER q: 0 st: lt: 8 ean: 4006209976340 sr: FISCHER 97634 sr_no_br: 97634 sr_no_br_cl: 97634 sr_cl: FISCHER97634 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Anchoring depth 60 mm Width across flats 17 mm Effective length 100 mm Drill hole depth 75 mm Drilling diameter 10 mm n: FISCHER 97634 highbond anchor FHB II-A S M10 x 60/100 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort - even outdoors. The fischer Highbond rod anchor FHB II-A S A4 is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, railings, and steel constructions are securely installed within external areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M10 x 60/100 stainless steel A4 kpn: 97634 kpn_dash: kpn_clear: 97634 bkpn: FISCHER 97634 bkpn_clear: FISCHER 97634 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97634 sr_ns: FISCHER97634
r: 08096880 p: 13.553 pid: 176258 b: FISCHER q: 0 st: lt: 8 ean: 4048962462531 sr: FISCHER 564628 sr_no_br: 564628 sr_no_br_cl: 564628 sr_cl: FISCHER564628 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 16 mm Effective length 50 mm Overall length 173 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M16 n: FISCHER 564628 piercing anchor FAZ II Plus 16/50 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easy assembly without the need for drill hole cleaning (M8-M24) Stainless steel: maximum safety for outdoor use Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs New ETA confirms the use of FAZ II Plus for the dynamic load of components for diameters M16-M24 under direct load Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: piercing anchor FAZ II Plus 16/50 R stainless steel kpn: 564628 kpn_dash: kpn_clear: 564628 bkpn: FISCHER 564628 bkpn_clear: FISCHER 564628 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564628 sr_ns: FISCHER564628
r: 08096857 p: 13.553 pid: 176245 b: FISCHER q: 0 st: lt: 8 ean: 4048962462616 sr: FISCHER 564636 sr_no_br: 564636 sr_no_br_cl: 564636 sr_cl: FISCHER564636 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 8 mm Effective length 30 mm Overall length 95 mm Material (bolt) Steel Surface treatment (bolt) None Thread designation M8 n: FISCHER 564636 Piercing anchor FAZ II Plus 8/30 HCR high-corrosion steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 8/30 HCR high-corrosion steel kpn: 564636 kpn_dash: kpn_clear: 564636 bkpn: FISCHER 564636 bkpn_clear: FISCHER 564636 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564636 sr_ns: FISCHER564636
r: 03333931 p: 13.181 pid: 176230 b: FISCHER q: 0 st: lt: 15 ean: 4048962521399 sr: FISCHER 572542 sr_no_br: 572542 sr_no_br_cl: 572542 sr_cl: FISCHER572542 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 3 m n: FISCHER 572542 Support rail FLS 30/1.0 - 2 m cn: MOUNTING RAIL cn2: MOUNTING RAIL cn_clear: MOUNTINGRAIL d: Product description The flexible channel system for light applications The fischer channel FLS is a base element of the flexible channel system. The C-profile in three heights offers a secure hold for the construction elements of the FLS system with pronounced teeth and corner beading. For horizontal and vertical installations, this enables the fast and efficient fixing of pipelines and supporting structures. Alternating slots for optimum fixing and scaling on the channels to support cutting to size and the positioning of the connectors offer safety and simplify the installation process. The fire inspection report as per MLAR / EN1363-1 of the FLS 37 provides added safety. The fire inspection report in line with MLAR/EN1363-1 of the FLS 37 guarantees independently tested functional safety The channel shape with edge seams gives a perfect fit for the connector elements and leads to a safe and easy installation The serration with stamped teeth in the mounting channel gives the sliding nuts a secure hold to bear high shear loads The scale on the channels simplifies the cutting of the channels and the positioning of the connector elements during installation The alternating long slots in the channel enable the optimised fixing to the substrate with the perfect fixtures Application The U-profile channels enable the creation of secure, horizontal and vertical installations The channel system is suitable for fast and efficient fixings of pipelines and supporting structures For use in dry interior areas ds: dsc: kts: Support rail FLS 30/1.0 - 2 m kpn: 572542 kpn_dash: kpn_clear: 572542 bkpn: FISCHER 572542 bkpn_clear: FISCHER 572542 c_path: Home / Fasteners and machine components / Fasteners / Rails and mounting / Mounting rail | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer rails and mounting / Fischer mounting rail sr_no_br_cl_ns: 572542 sr_ns: FISCHER572542
r: 02020199 p: 13.181 pid: 15992 b: FISCHER q: 0 st: lt: 8 ean: 4006209972960 sr: FISCHER 97296 sr_no_br: 97296 sr_no_br_cl: 97296 sr_cl: FISCHER97296 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 16 mm Length 95 mm Anchoring depth 95 mm Width across flats 24 mm Effective length 165 mm Drill hole depth 110 mm Drilling diameter 16 mm n: FISCHER 97296 highbond anchor FHB II-A S M16 x 95/165 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort. The fischer Highbond rod anchor FHB II-A S is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that railings, machines and heavy steel constructions are securely installed within internal areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M16 x 95/165 ev kpn: 97296 kpn_dash: kpn_clear: 97296 bkpn: FISCHER 97296 bkpn_clear: FISCHER 97296 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97296 sr_ns: FISCHER97296
r: 02860726 p: 13.057 pid: 175987 b: FISCHER q: 0 st: lt: 8 ean: 4006209795538 sr: FISCHER 79553 sr_no_br: 79553 sr_no_br_cl: 79553 sr_cl: FISCHER79553 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width 14 mm Thickness 2,6 mm Roll length 10 m n: FISCHER 79553 Mounting strap AHU 14 cn: PERFORATED METAL STRIP cn2: PERFORATED METAL STRIP cn_clear: PERFORATEDMETALSTRIP d: Product description High-quality steel tape with holes for simple installation. The fischer perforated steel tape LBK with cut-out holes for simple installation in plastic-covered versions. The perforated tapes' sheet thicknesses allow the tapes to be easily cut to size using sheet metal shears. The perforated tapes' hole geometry enables ground fixing using the fischer impact nail ED. Protective sheath made of polyethylene The perforated tape's material thicknesses and plastic covering allow the tapes to be easily cut to size using metal shears The perforated tape's hole geometry enables concrete fixing using the fischer impact nail ED Building materials When using impact nail ED: Concrete Application Steel tape with stamped holes for simple installation of pipes on the substrate, e. g. on unfinished floor Available as zinc-plated LBV or plastic-covered LBK The fischer nail anchor FNA II is suitable for ceiling fixing in concrete Use fischer thread hanger RAH for fastening to threaded rods For use in dry interior areas ds: dsc: kts: Mounting strap AHU 14 kpn: 79553 kpn_dash: kpn_clear: 79553 bkpn: FISCHER 79553 bkpn_clear: FISCHER 79553 c_path: Home / Fasteners and machine components / Fasteners / Rails and mounting / Perforated metal strip | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer rails and mounting / Fischer perforated metal strip sr_no_br_cl_ns: 79553 sr_ns: FISCHER79553
r: 08096921 p: 12.892 pid: 176311 b: FISCHER q: 0 st: lt: 8 ean: 4048962462944 sr: FISCHER 564669 sr_no_br: 564669 sr_no_br_cl: 564669 sr_cl: FISCHER564669 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 160 mm Overall length 260 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M12 n: FISCHER 564669 Piercing anchor FAZ II Plus 12/160 GS R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS stainless steel with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the stainless steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS stainless steel can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. The stainless steel version is used to fix loads in outdoor areas. For example, the steel anchor with large washer is ideal for fixing steel components or façade substructures with slots. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Stainless steel: maximum safety for outdoor use Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 12/160 GS R stainless steel kpn: 564669 kpn_dash: kpn_clear: 564669 bkpn: FISCHER 564669 bkpn_clear: FISCHER 564669 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564669 sr_ns: FISCHER564669
r: 02020731 p: 12.892 pid: 12018 b: FISCHER q: 0 st: lt: 8 ean: 4006209920183 sr: FISCHER 92018 sr_no_br: 92018 sr_no_br_cl: 92018 sr_cl: FISCHER92018 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Anchoring depth 100 mm Width across flats 19 mm Effective length 8 - 25 mm Drill hole depth 130 mm Drilling diameter 14 mm n: FISCHER 92018 highbond anchor FHB-A dynamic 12 x 100/25 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The highest performance in class amongst dynamic anchors. The fischer Highbond anchor dynamic FHB-A dyn is made of zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and guarantees optimum load distribution. This allows for the absorption of dynamic alternating loads. The fischer Highbond anchor dynamic FHB-A dyn is ideally suited for fixing guide rails for elevators, industrial robots, or mobile portal and ceiling cranes in internal areas. Controlled expansion under dynamic stress due to cone shape Absorption of dynamic alternating loads via optimum load distribution Approved for cracked concrete The Highbond-anchor dynamic FHB-A dyn must be applied in combination with the Highbond-mortar FIS HB During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and ensures optimum load distribution. This allows for the absorption of dynamic alternating loads The cone shape of the FHB-A dyn anchor rod ensures a controlled expansion under dynamic stress, thus allowing for use in cracked concrete The anchor rod FHB-A dyn is also available made from high corrosion-resistant steel. This makes it suitable for use in aggressive atmospheres, for example in tunnels The Highbond anchor dynamic system can achieve even greater shear loads thanks to the additional sleeve of the anchor rod FHB-A dyn V, and therefore provides an increased level of safety The ETA for static and quasi-static loads allows the use of sizes M12 and M16 also for the anchoring base steel fiber concrete Suitable for The injection system suitable for tensile zones consists of the Highbond dynamic anchor rod FHB-A dyn and the injection mortar FIS HB FHB dyn is approved for pre-positioned and push-through installation Extruding the mortar causes the two components to be mixed and activated in the static mixer The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole The centring sleeve centres the anchor in the fixture, thus ensuring a safe load application The lock nut prevents the nut from becoming loose Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Steel fiber reinforced concrete (M12 / M16) Application Jib cranes Gantry and overhead cranes Guide rails for elevators Tunnel ventilators (jet fans) Gantries in road construction Antennas and transmitter masts Industrial robots ds: dsc: kts: highbond anchor FHB-A dynamic 12 x 100/25 ev kpn: 92018 kpn_dash: kpn_clear: 92018 bkpn: FISCHER 92018 bkpn_clear: FISCHER 92018 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 92018 sr_ns: FISCHER92018
r: 02137075 p: 12.727 pid: 21041 b: FISCHER q: 0 st: lt: 8 ean: 4006209502990 sr: FISCHER 50299 sr_no_br: 50299 sr_no_br_cl: 50299 sr_cl: FISCHER50299 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 16 mm Length 300 mm Drilling diameter 18 mm n: FISCHER 50299 anchor rod RG M16 x 300 R stainless steel cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The proven rod anchor for external use with a mortar cartridge or injection mortar. The fischer rod anchor RG M is produced from stainless steel. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas. Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge Stainless steel for outdoor use The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety Please refer to the approvals for the resin capsules and mortar used Suitable for Due to its oblique edge, the anchor rod RG M is particularly suitable for use in conjunction with resin capsules The anchor rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar Use with injection mortar is also possible. Here, the anchor rod is manually inserted into the drill hole with a light rotating movement until it reaches the base of the hole Building materials In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete In connection with several fischer injection mortars approved or suitable for different building materials Application Anchorings with resin capsule RSB and RSB mini Anchorings with resin capsule RM II Anchorings with each of the fischer injection mortars FIS SB, FIS EM, FIS EB II, FIS V, FIS VL, FIS V Zero, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod RG M16 x 300 R stainless steel kpn: 50299 kpn_dash: kpn_clear: 50299 bkpn: FISCHER 50299 bkpn_clear: FISCHER 50299 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 50299 sr_ns: FISCHER50299
r: 02020575 p: 12.727 pid: 17506 b: FISCHER q: 0 st: lt: 8 ean: 4006209976180 sr: FISCHER 97618 sr_no_br: 97618 sr_no_br_cl: 97618 sr_cl: FISCHER97618 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Anchoring depth 95 mm Width across flats 17 mm Effective length 40 mm Drill hole depth 110 mm Drilling diameter 12 mm n: FISCHER 97618 highbond anchor FHB II-A L M10 x 95/40 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tension loads - even outdoors. The fischer Highbond rod anchor FHB II-A L is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, silos, and heavy steel constructions are securely installed within external areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M10 x 95/40 stainless steel A4 kpn: 97618 kpn_dash: kpn_clear: 97618 bkpn: FISCHER 97618 bkpn_clear: FISCHER 97618 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97618 sr_ns: FISCHER97618
r: 02020555 p: 12.561 pid: 15997 b: FISCHER q: 0 st: lt: 8 ean: 4006209976388 sr: FISCHER 97638 sr_no_br: 97638 sr_no_br_cl: 97638 sr_cl: FISCHER97638 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Anchoring depth 75 mm Width across flats 19 mm Effective length 60 mm Drill hole depth 90 mm Drilling diameter 12 mm n: FISCHER 97638 highbond anchor FHB II-A S M12 x 75/60 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort - even outdoors. The fischer Highbond rod anchor FHB II-A S A4 is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, railings, and steel constructions are securely installed within external areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M12 x 75/60 stainless steel A4 kpn: 97638 kpn_dash: kpn_clear: 97638 bkpn: FISCHER 97638 bkpn_clear: FISCHER 97638 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97638 sr_ns: FISCHER97638
r: 08096885 p: 12.24 pid: 176293 b: FISCHER q: 0 st: lt: 8 ean: 4048962462265 sr: FISCHER 564601 sr_no_br: 564601 sr_no_br_cl: 564601 sr_cl: FISCHER564601 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 16 mm Effective length 300 mm Overall length 423 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M16 n: FISCHER 564601 Piercing anchor FAZ II Plus 16/300 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs New ETA confirms the use of FAZ II Plus for the dynamic load of components for diameters M16-M24 under direct load Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 16/300 EV electrolytically galvanised steel kpn: 564601 kpn_dash: kpn_clear: 564601 bkpn: FISCHER 564601 bkpn_clear: FISCHER 564601 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564601 sr_ns: FISCHER564601
r: 08096920 p: 12.24 pid: 176292 b: FISCHER q: 0 st: lt: 8 ean: 4048962462500 sr: FISCHER 564625 sr_no_br: 564625 sr_no_br_cl: 564625 sr_cl: FISCHER564625 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 160 mm Overall length 260 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M12 n: FISCHER 564625 Piercing anchor FAZ II Plus 12/160 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 12/160 R stainless steel kpn: 564625 kpn_dash: kpn_clear: 564625 bkpn: FISCHER 564625 bkpn_clear: FISCHER 564625 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564625 sr_ns: FISCHER564625
r: 87051283 p: 12.231 pid: 74387 b: FISCHER q: 0 st: lt: 8 ean: 4006209607787 sr: FISCHER 60778 sr_no_br: 60778 sr_no_br_cl: 60778 sr_cl: FISCHER60778 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 14 mm Effective length 25 mm Overall length 79 mm Material (bolt) Stainless steel A4 Thread designation M10 n: FISCHER 60778 zykon anchor FZA 14 x 40 M10/25 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The system consists of stainless steel for optimum safety in cracked concrete. The fischer ZYKON bolt anchor FZA is an anchor made of stainless steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the pre-positioned installation. The expansion sleeve is driven above the cone with the setting tool FZE Plus and fills the undercut drill hole with a positive fit. The fischer ZYKON bolt anchor FZA is ideal for fixing façades, railings, and steel constructions within external areas in cracked concrete. Maximum safety due to a positive fit connection Low axial and edge distances due to expansion pressure-free installation Fast installation, no exchanging tools. This saves time and costs Power-saving installation with low setting energy ETA approval for cracked concrete and fire resistance class R 120 The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks The almost expansion-free installation of the anchor allows small edge distances and axial spacing, and thereby enables flexible use The FZUB special drill allows for a fast installation by creating the undercut without having to change tools The drill hole geometry allows for a very low setting energy, thus reducing the energy required for installation Suitable for The FZA is suitable for pre-positioned installation The undercut drill hole is created using the special FZUB drill Once the anchor has been placed in the drill hole, the expansion sleeve is driven over the cone using the FZE Plus setting tool, and the undercut drill hole is filled with a positive fit Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steelwork constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: zykon anchor FZA 14 x 40 M10/25 R stainless steel kpn: 60778 kpn_dash: kpn_clear: 60778 bkpn: FISCHER 60778 bkpn_clear: FISCHER 60778 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 60778 sr_ns: FISCHER60778
r: 02137357 p: 12.16 pid: 22447 b: FISCHER q: 0 st: lt: 7 ean: 4048962087567 sr: FISCHER 507569 sr_no_br: 507569 sr_no_br_cl: 507569 sr_cl: FISCHER507569 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 16 mm Effective length 25/40 mm Overall length 145 mm Material (bolt) Stainless steel A4 Thread designation M16 n: FISCHER 507569 rapid-action anchor FBN II 16/25 stainless steel R cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing made of stainless steel for use in non-cracked concrete. The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The stainless steel version of the bolt anchor is suitable for fixing façade sub-structures, consoles, and ladders in external areas. The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility Simple assembly due to few taps and minimal slippage Stainless steel: permanent safety in outdoor use The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 16/25 stainless steel R kpn: 507569 kpn_dash: kpn_clear: 507569 bkpn: FISCHER 507569 bkpn_clear: FISCHER 507569 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 507569 sr_ns: FISCHER507569
r: 08134116 p: 12.066 pid: 176376 b: FISCHER q: 0 st: lt: 8 ean: 4048962442403 sr: FISCHER 562212 sr_no_br: 562212 sr_no_br_cl: 562212 sr_cl: FISCHER562212 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Length (Wall plug) 120 mm Drill hole depth - mm Wall plug type Hammer-in plug With screw Yes With collar Yes Application Concrete type (screw head) Spanner size 13 mm n: FISCHER 562212 construction plug DuoXpand 10 x 120 FUS hexagonal head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The Xpert in all substrates Thanks to the clever combination of material and design, the plug bites into all substrates, guaranteeing universal applicability. The special blade geometry carefully moulds itself to the respective building material. This prevents breaks in porous substrates and allows anchoring close to the edge. The base made of high-quality nylon guarantees very strong fastening, at the same time the flexible red slats ensure optimum dispersion in the material. The European Technical Certification (ETA) for multiple anchoring of non-load-bearing systems guarantees safety in all substrates. The DuoXpand construction plug with double anchorage depth is certified for multiple anchoring of non-load-bearing systems in concrete, masonry and aerated concrete. Thanks to the special geometry and the use of different plastics, the plug adapts perfectly to the substrate. The range covers diameters 8 mm and 10 mm and lengths up to 230 mm. The DuoXpand with hexagonal head is very suitable for fixing metal attachments in masonry or concrete. Applications Wooden and metal facade and roof elements Window frames Fences Wardrobes Kitchen cupboards Timber TV brackets Cladding Metal brackets Metal supports Cable trays Cable trays Building materials Certified for: Concrete >= C12/15 Solid brick Solid sand-lime brick Solid concrete blocks of lightweight concrete and normal concrete Perforated clay brick Perforated sand-lime brick Lightweight concrete hollow blocks Aerated concrete Also suitable for: High-density natural stone Gypsum blocks ds: dsc: Scope of delivery (per purchase of 10) 10x construction plug DuoXpand 10x 100 FUS kts: construction plug DuoXpand 10 x 120 FUS hexagonal head kpn: 562212 kpn_dash: kpn_clear: 562212 bkpn: FISCHER 562212 bkpn_clear: FISCHER 562212 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 562212 sr_ns: FISCHER562212
r: 02137352 p: 12.05 pid: 21614 b: FISCHER q: 0 st: lt: 6 ean: 4048962087529 sr: FISCHER 507568 sr_no_br: 507568 sr_no_br_cl: 507568 sr_cl: FISCHER507568 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 16 mm Effective length 10/25 mm Overall length 130 mm Material (bolt) Stainless steel A4 Thread designation M16 n: FISCHER 507568 rapid-action anchor FBN II 16/10 stainless steel R cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing made of stainless steel for use in non-cracked concrete. The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The stainless steel version of the bolt anchor is suitable for fixing façade sub-structures, consoles, and ladders in external areas. The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility Simple assembly due to few taps and minimal slippage Stainless steel: permanent safety in outdoor use The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 16/10 stainless steel R kpn: 507568 kpn_dash: kpn_clear: 507568 bkpn: FISCHER 507568 bkpn_clear: FISCHER 507568 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 507568 sr_ns: FISCHER507568
r: 02020573 p: 12.02 pid: 17100 b: FISCHER q: 0 st: lt: 8 ean: 4006209976173 sr: FISCHER 97617 sr_no_br: 97617 sr_no_br_cl: 97617 sr_cl: FISCHER97617 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Anchoring depth 95 mm Width across flats 17 mm Effective length 20 mm Drill hole depth 110 mm Drilling diameter 12 mm n: FISCHER 97617 highbond anchor FHB II-A L M10 x 95/20 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tension loads - even outdoors. The fischer Highbond rod anchor FHB II-A L is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, silos, and heavy steel constructions are securely installed within external areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M10 x 95/20 stainless steel A4 kpn: 97617 kpn_dash: kpn_clear: 97617 bkpn: FISCHER 97617 bkpn_clear: FISCHER 97617 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97617 sr_ns: FISCHER97617
