r: 02137083 p: 99.958 pid: 22236 b: FISCHER q: 0 st: lt: 8 ean: 4006209907252 sr: FISCHER 90725 sr_no_br: 90725 sr_no_br_cl: 90725 sr_cl: FISCHER90725 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 27 mm Length 340 mm Material Stainless steel 316 Drilling diameter 32 mm n: FISCHER 90725 anchor rod RG M27 x 340 R stainless steel cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The proven rod anchor for external use with a mortar cartridge or injection mortar. The fischer rod anchor RG M is produced from stainless steel. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas. Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge Stainless steel for outdoor use The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety Please refer to the approvals for the resin capsules and mortar used Suitable for Due to its oblique edge, the anchor rod RG M is particularly suitable for use in conjunction with resin capsules The anchor rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar Use with injection mortar is also possible. Here, the anchor rod is manually inserted into the drill hole with a light rotating movement until it reaches the base of the hole Building materials In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete In connection with several fischer injection mortars approved or suitable for different building materials Application Anchorings with resin capsule RSB and RSB mini Anchorings with resin capsule RM II Anchorings with each of the fischer injection mortars FIS SB, FIS EM, FIS EB II, FIS V, FIS VL, FIS V Zero, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod RG M27 x 340 R stainless steel kpn: 90725 kpn_dash: kpn_clear: 90725 bkpn: FISCHER 90725 bkpn_clear: FISCHER 90725 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 90725 sr_ns: FISCHER90725
r: 87051289 p: 88.925 pid: 74402 b: FISCHER q: 0 st: lt: 8 ean: 4006209607688 sr: FISCHER 60768 sr_no_br: 60768 sr_no_br_cl: 60768 sr_cl: FISCHER60768 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 22 mm Effective length 60 mm Overall length 209 mm Material (bolt) Stainless steel A4 Thread designation M16 n: FISCHER 60768 zykon anchor FZA 22 x 125 M16/60 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The system consists of stainless steel for optimum safety in cracked concrete. The fischer ZYKON bolt anchor FZA is an anchor made of stainless steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the pre-positioned installation. The expansion sleeve is driven above the cone with the setting tool FZE Plus and fills the undercut drill hole with a positive fit. The fischer ZYKON bolt anchor FZA is ideal for fixing façades, railings, and steel constructions within external areas in cracked concrete. Maximum safety due to a positive fit connection Low axial and edge distances due to expansion pressure-free installation Fast installation, no exchanging tools. This saves time and costs Power-saving installation with low setting energy ETA approval for cracked concrete and fire resistance class R 120 The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks The almost expansion-free installation of the anchor allows small edge distances and axial spacing, and thereby enables flexible use The FZUB special drill allows for a fast installation by creating the undercut without having to change tools The drill hole geometry allows for a very low setting energy, thus reducing the energy required for installation Suitable for The FZA is suitable for pre-positioned installation The undercut drill hole is created using the special FZUB drill Once the anchor has been placed in the drill hole, the expansion sleeve is driven over the cone using the FZE Plus setting tool, and the undercut drill hole is filled with a positive fit Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steelwork constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: zykon anchor FZA 22 x 125 M16/60 R stainless steel kpn: 60768 kpn_dash: kpn_clear: 60768 bkpn: FISCHER 60768 bkpn_clear: FISCHER 60768 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 60768 sr_ns: FISCHER60768
r: 87051315 p: 66.9 pid: 16029 b: FISCHER q: 0 st: lt: 8 ean: 4006209607701 sr: FISCHER 60770 sr_no_br: 60770 sr_no_br_cl: 60770 sr_cl: FISCHER60770 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm n: FISCHER FZA 22x125 M12 R Zykon female threaded anchor stainless steel - 60770 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The internally threaded anchor consists of stainless steel for optimum safety in cracked concrete. The fischer ZYKON internal threaded anchor FZA-I is an anchor made of stainless steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the pre-positioned installation. The expansion sleeve is driven above the cone with the setting tool FZE Plus and fills the undercut drill hole with a positive fit. The fischer ZYKON internal threaded anchor FZA-I is ideal for fixing steel constructions, staircases, and temporary fixings within external areas in cracked concrete. Maximum safety due to a positive fit connection High flexibility due to using conventional metric screws and threaded rods Fast installation, no exchanging tools. This saves time and costs ETA approval for cracked concrete and fire resistance class R 120 Made of stainless steel for fixings used outside The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use The FZA-I allows for surface flush removal and reuse of the fixing point, and therefore offers the best possible flexibility Furthermore, the ZYKON undercut anchor FZA-I offers all the benefits of the FZA Suitable for FZA-I with internal thread is suitable for pre-positioned installation The undercut drill hole is created using the special FZUB drill Once the anchor has been placed in the drill hole, the expansion sleeve is driven over the cone using the FZE Plus setting tool, and the undercut drill hole is filled with a positive fit Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates ds: dsc: kts: Zykon female threaded anchor stainless steel kpn: FZA 22x125 M12 R kpn_dash: kpn_clear: FZA22x125M12R bkpn: FISCHER FZA 22x125 M12 R bkpn_clear: FISCHER FZA22x125M12R c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 60770 sr_ns: FISCHER60770
r: 87051394 p: 66.9 pid: 16042 b: FISCHER q: 0 st: lt: 8 ean: 4048962015423 sr: FISCHER 502711 sr_no_br: 502711 sr_no_br_cl: 502711 sr_cl: FISCHER502711 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 24 mm Overall length 160 mm Safety anchor Yes Drilling diameter 24 mm n: FISCHER FH II 24/25 S safety anchor with hexagonal head stainless steel R - 502711 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor. Made of stainless steel with sophisticated design in cracked concrete. The fischer high-performance anchor FH II S with hexagonal head is a sleeve anchor made of stainless steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II S with hexagonal head is ideally suited to fix consoles, steel constructions, and railings tin external areas in cracked and non-cracked concrete. Made of stainless steel for fixings used outside The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2) The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2) The low profile of the screw head ensures for a discreet fixing The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required The optimised geometry intelligently reduces the energy required for assembly The approval regulates the use of hollow drills Suitable for The FH II is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base Available head shapes for flexible design solutions:Countersunk head (type SK), hexagon head (type S), bolt version with nut and washer (type B) and cap nut (type H) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Guard rails Staircases Consoles Steel constructions Ladders Cable trays Machines Gates Façades Gratings ds: dsc: kts: safety anchor with hexagonal head stainless steel R kpn: FH II 24/25 S kpn_dash: kpn_clear: FHII2425S bkpn: FISCHER FH II 24/25 S bkpn_clear: FISCHER FHII2425S c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 502711 sr_ns: FISCHER502711
r: 08096881 p: 59.669 pid: 176264 b: FISCHER q: 0 st: lt: 8 ean: 4048962462685 sr: FISCHER 564643 sr_no_br: 564643 sr_no_br_cl: 564643 sr_cl: FISCHER564643 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 16 mm Effective length 50 mm Overall length 173 mm Material (bolt) Steel Surface treatment (bolt) None Thread designation M16 n: FISCHER 564643 Piercing anchor FAZ II Plus 16/50 HCR high-corrosion steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 16/50 HCR high-corrosion steel kpn: 564643 kpn_dash: kpn_clear: 564643 bkpn: FISCHER 564643 bkpn_clear: FISCHER 564643 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564643 sr_ns: FISCHER564643
r: 02020745 p: 53.884 pid: 12032 b: FISCHER q: 0 st: lt: 8 ean: 4006209920381 sr: FISCHER 92038 sr_no_br: 92038 sr_no_br_cl: 92038 sr_cl: FISCHER92038 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 24 mm Anchoring depth 220 mm Width across flats 36 mm Effective length 14 - 50 mm Drill hole depth 275 mm Drilling diameter 28 mm n: FISCHER 92038 highbond anchor FHB-A dynamic 24 x 220/50 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The highest performance in class amongst dynamic anchors The fischer Highbond anchor dynamic FHB-A dyn is made of zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and guarantees optimum load distribution. This allows for the absorption of dynamic alternating loads. The fischer Highbond anchor dynamic FHB-A dyn is ideally suited for fixing guide rails for elevators, industrial robots, or mobile portal and ceiling cranes in internal areas. Controlled expansion under dynamic stress due to cone shape Absorption of dynamic alternating loads via optimum load distribution Approved for cracked concrete The Highbond-anchor dynamic FHB-A dyn must be applied in combination with the Highbond-mortar FIS HB During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and ensures optimum load distribution. This allows for the absorption of dynamic alternating loads The cone shape of the FHB-A dyn anchor rod ensures a controlled expansion under dynamic stress, thus allowing for use in cracked concrete The anchor rod FHB-A dyn is also available made from high corrosion-resistant steel. This makes it suitable for use in aggressive atmospheres, for example in tunnels The Highbond anchor dynamic system can achieve even greater shear loads thanks to the additional sleeve of the anchor rod FHB-A dyn V, and therefore provides an increased level of safety The ETA for static and quasi-static loads allows the use of sizes M12 and M16 also for the anchoring base steel fiber concrete Suitable for The injection system suitable for tensile zones consists of the Highbond dynamic anchor rod FHB-A dyn and the injection mortar FIS HB FHB dyn is approved for pre-positioned and push-through installation Extruding the mortar causes the two components to be mixed and activated in the static mixer The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole The centring sleeve centres the anchor in the fixture, thus ensuring a safe load application The lock nut prevents the nut from becoming loose Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Steel fiber reinforced concrete (M12 / M16) Application Jib cranes Gantry and overhead cranes Guide rails for elevators Tunnel ventilators (jet fans) Gantries in road construction Antennas and transmitter masts Industrial robots ds: dsc: kts: highbond anchor FHB-A dynamic 24 x 220/50 ev kpn: 92038 kpn_dash: kpn_clear: 92038 bkpn: FISCHER 92038 bkpn_clear: FISCHER 92038 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 92038 sr_ns: FISCHER92038
r: 08096888 p: 51.9 pid: 176282 b: FISCHER q: 0 st: lt: 8 ean: 4048962462678 sr: FISCHER 564642 sr_no_br: 564642 sr_no_br_cl: 564642 sr_cl: FISCHER564642 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 16 mm Effective length 25 mm Overall length 148 mm Material (bolt) Steel Surface treatment (bolt) None Thread designation M16 n: FISCHER 564642 Piercing anchor FAZ II Plus 16/25 HCR high-corrosion steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 16/25 HCR high-corrosion steel kpn: 564642 kpn_dash: kpn_clear: 564642 bkpn: FISCHER 564642 bkpn_clear: FISCHER 564642 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564642 sr_ns: FISCHER564642
r: 87051314 p: 50.743 pid: 16027 b: FISCHER q: 0 st: lt: 8 ean: 4006209607886 sr: FISCHER 60788 sr_no_br: 60788 sr_no_br_cl: 60788 sr_cl: FISCHER60788 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm n: FISCHER FZA 22x100 M12 R Zykon female threaded anchor stainless steel - 60788 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The internally threaded anchor consists of stainless steel for optimum safety in cracked concrete. The fischer ZYKON internal threaded anchor FZA-I is an anchor made of stainless steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the pre-positioned installation. The expansion sleeve is driven above the cone with the setting tool FZE Plus and fills the undercut drill hole with a positive fit. The fischer ZYKON internal threaded anchor FZA-I is ideal for fixing steel constructions, staircases, and temporary fixings within external areas in cracked concrete. Maximum safety due to a positive fit connection High flexibility due to using conventional metric screws and threaded rods Fast installation, no exchanging tools. This saves time and costs ETA approval for cracked concrete and fire resistance class R 120 Made of stainless steel for fixings used outside The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use The FZA-I allows for surface flush removal and reuse of the fixing point, and therefore offers the best possible flexibility Furthermore, the ZYKON undercut anchor FZA-I offers all the benefits of the FZA Suitable for FZA-I with internal thread is suitable for pre-positioned installation The undercut drill hole is created using the special FZUB drill Once the anchor has been placed in the drill hole, the expansion sleeve is driven over the cone using the FZE Plus setting tool, and the undercut drill hole is filled with a positive fit Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates ds: dsc: kts: Zykon female threaded anchor stainless steel kpn: FZA 22x100 M12 R kpn_dash: kpn_clear: FZA22x100M12R bkpn: FISCHER FZA 22x100 M12 R bkpn_clear: FISCHER FZA22x100M12R c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 60788 sr_ns: FISCHER60788
r: 87051288 p: 50.743 pid: 74545 b: FISCHER q: 0 st: lt: 8 ean: 4006209607824 sr: FISCHER 60782 sr_no_br: 60782 sr_no_br_cl: 60782 sr_cl: FISCHER60782 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 22 mm Effective length 60 mm Overall length 184 mm Material (bolt) Stainless steel A4 Thread designation M16 n: FISCHER 60782 zykon anchor FZA 22 x 100 M16/60 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The system consists of stainless steel for optimum safety in cracked concrete. The fischer ZYKON bolt anchor FZA is an anchor made of stainless steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the pre-positioned installation. The expansion sleeve is driven above the cone with the setting tool FZE Plus and fills the undercut drill hole with a positive fit. The fischer ZYKON bolt anchor FZA is ideal for fixing façades, railings, and steel constructions within external areas in cracked concrete. Maximum safety due to a positive fit connection Low axial and edge distances due to expansion pressure-free installation Fast installation, no exchanging tools. This saves time and costs Power-saving installation with low setting energy ETA approval for cracked concrete and fire resistance class R 120 The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks The almost expansion-free installation of the anchor allows small edge distances and axial spacing, and thereby enables flexible use The FZUB special drill allows for a fast installation by creating the undercut without having to change tools The drill hole geometry allows for a very low setting energy, thus reducing the energy required for installation Suitable for The FZA is suitable for pre-positioned installation The undercut drill hole is created using the special FZUB drill Once the anchor has been placed in the drill hole, the expansion sleeve is driven over the cone using the FZE Plus setting tool, and the undercut drill hole is filled with a positive fit Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steelwork constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: zykon anchor FZA 22 x 100 M16/60 R stainless steel kpn: 60782 kpn_dash: kpn_clear: 60782 bkpn: FISCHER 60782 bkpn_clear: FISCHER 60782 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 60782 sr_ns: FISCHER60782
r: 87051304 p: 50.743 pid: 75324 b: FISCHER q: 0 st: lt: 8 ean: 4006209606735 sr: FISCHER 60673 sr_no_br: 60673 sr_no_br_cl: 60673 sr_cl: FISCHER60673 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 18 mm Effective length 50 mm Overall length 156 mm Material (bolt) Stainless steel A4 Thread designation M12 n: FISCHER 60673 zykon piercing anchor FZA 18 x 130 M12/50 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The undercut anchor made of stainless steel for through-type installations in cracked concrete. The fischer ZYKON push-through anchor FZA-D is an anchor made of stainless steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the through-type installation. The expansion sleeve is driven above the cone with the setting tool FZE Plus and fills the undercut drill hole with a positive fit. The fischer ZYKON push-through anchor FZA-D is ideal for fixing façades, railings, and steel constructions within external areas in cracked concrete. Maximum safety due to a positive fit connection Low axial and edge distances due to expansion pressure-free installation Fast installation, no exchanging tools. This saves time and costs For time-saving push-through installation Made of stainless steel for fixings used outside The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks The almost expansion-free installation of the anchor allows small edge distances and axial spacing, and thereby enables flexible use The FZUB special drill allows for a fast installation by creating the undercut without having to change tools The drill hole geometry allows for a very low setting energy, thus reducing the energy required for installation The ideal interaction of threaded bolts and sleeve with FZA-D allows for a high shear load and therefore fewer fixing points Suitable for The FZA-D is suitable for push-through installation The undercut drill hole is created using the special FZUB drill Once the anchor has been placed in the drill hole, the expansion sleeve is driven over the cone using the FZE Plus setting tool, and the undercut drill hole is filled with a positive fit Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steelwork constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: zykon piercing anchor FZA 18 x 130 M12/50 R stainless steel kpn: 60673 kpn_dash: kpn_clear: 60673 bkpn: FISCHER 60673 bkpn_clear: FISCHER 60673 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 60673 sr_ns: FISCHER60673
r: 02020608 p: 48.925 pid: 16175 b: FISCHER q: 0 st: lt: 8 ean: 4006209976296 sr: FISCHER 97629 sr_no_br: 97629 sr_no_br_cl: 97629 sr_cl: FISCHER97629 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 20 mm Anchoring depth 210 mm Width across flats 30 mm Effective length 50 mm Drill hole depth 235 mm Drilling diameter 25 mm n: FISCHER 97629 highbond anchor FHB II-A L M20 x 210/50 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tension loads - even outdoors. The fischer Highbond rod anchor FHB II-A L is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, silos, and heavy steel constructions are securely installed within external areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M20 x 210/50 stainless steel A4 kpn: 97629 kpn_dash: kpn_clear: 97629 bkpn: FISCHER 97629 bkpn_clear: FISCHER 97629 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97629 sr_ns: FISCHER97629
r: 02020567 p: 43.966 pid: 15999 b: FISCHER q: 0 st: lt: 8 ean: 4006209976456 sr: FISCHER 97645 sr_no_br: 97645 sr_no_br_cl: 97645 sr_cl: FISCHER97645 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 24 mm Anchoring depth 170 mm Width across flats 36 mm Effective length 50 mm Drill hole depth 190 mm Drilling diameter 25 mm n: FISCHER 97645 highbond anchor FHB II-A S M24 x 170/50 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort - even outdoors. The fischer Highbond rod anchor FHB II-A S A4 is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, railings, and steel constructions are securely installed within external areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M24 x 170/50 stainless steel A4 kpn: 97645 kpn_dash: kpn_clear: 97645 bkpn: FISCHER 97645 bkpn_clear: FISCHER 97645 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97645 sr_ns: FISCHER97645
r: 08096870 p: 43.471 pid: 176266 b: FISCHER q: 0 st: lt: 8 ean: 4048962462593 sr: FISCHER 564634 sr_no_br: 564634 sr_no_br_cl: 564634 sr_cl: FISCHER564634 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 24 mm Effective length 60 mm Overall length 235 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M24 n: FISCHER 564634 Piercing anchor FAZ II Plus 24/60 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Stainless steel: maximum safety for outdoor use New ETA confirms the use of FAZ II Plus for the dynamic load of components for diameters M16-M24 under direct load Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 24/60 R stainless steel kpn: 564634 kpn_dash: kpn_clear: 564634 bkpn: FISCHER 564634 bkpn_clear: FISCHER 564634 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564634 sr_ns: FISCHER564634
r: 02137081 p: 42.644 pid: 22238 b: FISCHER q: 0 st: lt: 8 ean: 4006209502686 sr: FISCHER 50268 sr_no_br: 50268 sr_no_br_cl: 50268 sr_cl: FISCHER50268 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 24 mm Length 300 mm Material Stainless steel 316 Drilling diameter 28 mm n: FISCHER 50268 anchor rod RG M24 x 300 R stainless steel cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The proven rod anchor for external use with a mortar cartridge or injection mortar. The fischer rod anchor RG M is produced from stainless steel. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas. Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge Stainless steel for outdoor use The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety Please refer to the approvals for the resin capsules and mortar used Suitable for Due to its oblique edge, the anchor rod RG M is particularly suitable for use in conjunction with resin capsules The anchor rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar Use with injection mortar is also possible. Here, the anchor rod is manually inserted into the drill hole with a light rotating movement until it reaches the base of the hole Building materials In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete In connection with several fischer injection mortars approved or suitable for different building materials Application Anchorings with resin capsule RSB and RSB mini Anchorings with resin capsule RM II Anchorings with each of the fischer injection mortars FIS SB, FIS EM, FIS EB II, FIS V, FIS VL, FIS V Zero, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod RG M24 x 300 R stainless steel kpn: 50268 kpn_dash: kpn_clear: 50268 bkpn: FISCHER 50268 bkpn_clear: FISCHER 50268 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 50268 sr_ns: FISCHER50268
r: 03172703 p: 39.628 pid: 176111 b: FISCHER q: 0 st: lt: 8 ean: 4048962417715 sr: FISCHER 558765 sr_no_br: 558765 sr_no_br_cl: 558765 sr_cl: FISCHER558765 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 360 ml Principal hazard property GHS07 Harmful or irritant Flash point > 100 °C ADR class 9 UN number UN3077 ADR packing group III Conseils de prudence (P) P101; P102; P280; P501; P273; P391 H-statements H315; H317; H319; H400; H410 Hazard class GHS07 Harmful or irritant; GHS09 Environmental hazard Physical state Solid n: FISCHER 558765 injection mortar FIS VW Plus 360 S cn: INJECTION MORTAR cn2: INJECTION MORTAR cn_clear: INJECTIONMORTAR d: Product description The powerful universal mortar for concrete and masonry. The fischer high-performance mortar FIS V Plus is the universal all-rounder for the highest requirements. The styrene-free vinyl ester hybrid mortar with its numerous fixing elements is approved for fixations in cracked and non-cracked concrete as well as in masonry. However, the injection mortar is also used with the approved system components for rebar connections, the fischer remedial wall tie VBS 8, the fischer weather facing wall tie FWS II, and the stand-off installation system TherMax. The variant FIS VS Plus Low Speed enables an extended processing time at higher processing temperatures or a greater drill hole depth. The shorter hardening time of the variant FIS VW Plus High Speed enables swift work progress even at low temperatures. Injection mortar system with approval for all relevant building materials Maximum load absorption for much greater security Short curing time Processing possible up to -10 °C in the building material Application in water-filled boreholes The FIS V Plus injection mortar has numerous system approvals, such as in cracked and non-cracked concrete, masonry and for special applications The ETA assessment for a service life of 100 years offers permanent safety for all applications The approved use in water-filled drill holes enables a wide range of applications, even under harsh environmental conditions FIS VW Plus High Speed has a significantly shorter hardening time than FIS V Plus, which ensures swift work progress even at low temperatures The FIS VS Plus Low Speed has an extended processing time that prevents the premature hardening of the mortar at higher temperatures. It is ideally suited to large drill hole depths The extensive range of accessories is ideally suited to the FIS V Plus injection mortar family, increases the great flexibility of the system and thus allows for a broad range of applications Suitable for FIS V Plus is a 2-component injection mortar based on a vinyl ester hybrid concept Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer The mortar is extruded bubble free from the drill hole base The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole The injection cartridges are quick and easy to use with the fischer dispensers Partially used cartridges can be reused by changing the static mixer Building materials Approved for anchorings in: Concrete C20/25 to C50/60, cracked and non-cracked Hollow blocks made from lightweight concrete Hollow blocks made from concrete Vertically perforated brick Perforated sand-lime brick Solid sand-lime brick Aerated concrete Solid brick Approved for: Rebar connections Remedial wall tie VBS 8 Weather facing reconstruction system FWS II Stand-off installation TherMax Application Steelwork constructions Timber constructions Guard rails Façades Staircases Steel brackets Machines Masts Awnings Canopies Gates Consoles Pipelines Gratings Satellite antennas ds: dsc: Scope of delivery (per purchase of 12) 12x Injection mortar FIS VW Plus 360 S 24x mixing nozzle FIS MR PLUS kts: injection mortar FIS VW Plus 360 S kpn: 558765 kpn_dash: kpn_clear: 558765 bkpn: FISCHER 558765 bkpn_clear: FISCHER 558765 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Injection mortar | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer injection mortar sr_no_br_cl_ns: 558765 sr_ns: FISCHER558765
r: 02137362 p: 38.677 pid: 22257 b: FISCHER q: 0 st: lt: 8 ean: 4048962087598 sr: FISCHER 507572 sr_no_br: 507572 sr_no_br_cl: 507572 sr_cl: FISCHER507572 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 20 mm Effective length 60/85 mm Overall length 217 mm Material (bolt) Stainless steel A4 Thread designation M20 n: FISCHER 507572 rapid-action anchor FBN II 20/60 stainless steel R cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing made of stainless steel for use in non-cracked concrete. The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The stainless steel version of the bolt anchor is suitable for fixing façade sub-structures, consoles, and ladders in external areas. The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility Stainless steel: permanent safety in outdoor use Ideal for high loads The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 20/60 stainless steel R kpn: 507572 kpn_dash: kpn_clear: 507572 bkpn: FISCHER 507572 bkpn_clear: FISCHER 507572 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 507572 sr_ns: FISCHER507572
r: 87051303 p: 38.512 pid: 74569 b: FISCHER q: 0 st: lt: 8 ean: 4006209606728 sr: FISCHER 60672 sr_no_br: 60672 sr_no_br_cl: 60672 sr_cl: FISCHER60672 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 18 mm Effective length 20 mm Overall length 126 mm Material (bolt) Stainless steel Thread designation M12 n: FISCHER 60672 zykon piercing anchor FZA 18 x 100 M12/20 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The undercut anchor made of stainless steel for through-type installations in cracked concrete. The fischer ZYKON push-through anchor FZA-D is an anchor made of stainless steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the through-type installation. The expansion sleeve is driven above the cone with the setting tool FZE Plus and fills the undercut drill hole with a positive fit. The fischer ZYKON push-through anchor FZA-D is ideal for fixing façades, railings, and steel constructions within external areas in cracked concrete. Maximum safety due to a positive fit connection Low axial and edge distances due to expansion pressure-free installation Fast installation, no exchanging tools. This saves time and costs For time-saving push-through installation Made of stainless steel for fixings used outside The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks The almost expansion-free installation of the anchor allows small edge distances and axial spacing, and thereby enables flexible use The FZUB special drill allows for a fast installation by creating the undercut without having to change tools The drill hole geometry allows for a very low setting energy, thus reducing the energy required for installation The ideal interaction of threaded bolts and sleeve with FZA-D allows for a high shear load and therefore fewer fixing points Suitable for The FZA-D is suitable for push-through installation The undercut drill hole is created using the special FZUB drill Once the anchor has been placed in the drill hole, the expansion sleeve is driven over the cone using the FZE Plus setting tool, and the undercut drill hole is filled with a positive fit Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steelwork constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: zykon piercing anchor FZA 18 x 100 M12/20 R stainless steel kpn: 60672 kpn_dash: kpn_clear: 60672 bkpn: FISCHER 60672 bkpn_clear: FISCHER 60672 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 60672 sr_ns: FISCHER60672
r: 02020607 p: 36.859 pid: 17516 b: FISCHER q: 0 st: lt: 8 ean: 4006209976289 sr: FISCHER 97628 sr_no_br: 97628 sr_no_br_cl: 97628 sr_cl: FISCHER97628 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 16 mm Anchoring depth 160 mm Width across flats 24 mm Effective length 100 mm Drill hole depth 175 mm Drilling diameter 18 mm n: FISCHER 97628 highbond anchor FHB II-A L M16 x 160/100 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tension loads - even outdoors. The fischer Highbond rod anchor FHB II-A L is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, silos, and heavy steel constructions are securely installed within external areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M16 x 160/100 stainless steel A4 kpn: 97628 kpn_dash: kpn_clear: 97628 bkpn: FISCHER 97628 bkpn_clear: FISCHER 97628 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97628 sr_ns: FISCHER97628
r: 02137360 p: 36.694 pid: 21620 b: FISCHER q: 0 st: lt: 10 ean: 4048962087581 sr: FISCHER 507571 sr_no_br: 507571 sr_no_br_cl: 507571 sr_cl: FISCHER507571 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 20 mm Effective length 30/55 mm Overall length 187 mm Material (bolt) Stainless steel A4 Thread designation M20 n: FISCHER 507571 rapid-action anchor FBN II 20/30 stainless steel R cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing made of stainless steel for use in non-cracked concrete. The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The stainless steel version of the bolt anchor is suitable for fixing façade sub-structures, consoles, and ladders in external areas. The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility Stainless steel: permanent safety in outdoor use Ideal for high loads The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 20/30 stainless steel R kpn: 507571 kpn_dash: kpn_clear: 507571 bkpn: FISCHER 507571 bkpn_clear: FISCHER 507571 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 507571 sr_ns: FISCHER507571
r: 87051287 p: 36.322 pid: 74539 b: FISCHER q: 0 st: lt: 8 ean: 4006209607671 sr: FISCHER 60767 sr_no_br: 60767 sr_no_br_cl: 60767 sr_cl: FISCHER60767 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 18 mm Effective length 55 mm Overall length 156 mm Material (bolt) Stainless steel A4 Thread designation M12 n: FISCHER 60767 zykon anchor FZA 18 x 80 M12/55 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The system consists of stainless steel for optimum safety in cracked concrete. The fischer ZYKON bolt anchor FZA is an anchor made of stainless steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the pre-positioned installation. The expansion sleeve is driven above the cone with the setting tool FZE Plus and fills the undercut drill hole with a positive fit. The fischer ZYKON bolt anchor FZA is ideal for fixing façades, railings, and steel constructions within external areas in cracked concrete. Maximum safety due to a positive fit connection Low axial and edge distances due to expansion pressure-free installation Fast installation, no exchanging tools. This saves time and costs Power-saving installation with low setting energy ETA approval for cracked concrete and fire resistance class R 120 The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks The almost expansion-free installation of the anchor allows small edge distances and axial spacing, and thereby enables flexible use The FZUB special drill allows for a fast installation by creating the undercut without having to change tools The drill hole geometry allows for a very low setting energy, thus reducing the energy required for installation Suitable for The FZA is suitable for pre-positioned installation The undercut drill hole is created using the special FZUB drill Once the anchor has been placed in the drill hole, the expansion sleeve is driven over the cone using the FZE Plus setting tool, and the undercut drill hole is filled with a positive fit Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steelwork constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: zykon anchor FZA 18 x 80 M12/55 R stainless steel kpn: 60767 kpn_dash: kpn_clear: 60767 bkpn: FISCHER 60767 bkpn_clear: FISCHER 60767 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 60767 sr_ns: FISCHER60767
