r: 08096940 p: 5.43 pid: 176316 b: FISCHER q: 0 st: lt: 8 ean: 4048962462920 sr: FISCHER 564667 sr_no_br: 564667 sr_no_br_cl: 564667 sr_cl: FISCHER564667 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 10 mm Overall length 110 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M12 n: FISCHER 564667 Piercing anchor FAZ II Plus 12/10 GS R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS stainless steel with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the stainless steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS stainless steel can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. The stainless steel version is used to fix loads in outdoor areas. For example, the steel anchor with large washer is ideal for fixing steel components or façade substructures with slots. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Stainless steel: maximum safety for outdoor use Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 12/10 GS R stainless steel kpn: 564667 kpn_dash: kpn_clear: 564667 bkpn: FISCHER 564667 bkpn_clear: FISCHER 564667 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564667 sr_ns: FISCHER564667
r: 08096912 p: 5.3 pid: 176291 b: FISCHER q: 0 st: lt: 8 ean: 4048962462456 sr: FISCHER 564620 sr_no_br: 564620 sr_no_br_cl: 564620 sr_cl: FISCHER564620 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 20 mm Overall length 120 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M12 n: FISCHER 564620 Piercing anchor FAZ II Plus 12/20 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 12/20 R stainless steel kpn: 564620 kpn_dash: kpn_clear: 564620 bkpn: FISCHER 564620 bkpn_clear: FISCHER 564620 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564620 sr_ns: FISCHER564620
r: 08096944 p: 5.21 pid: 176355 b: FISCHER q: 0 st: lt: 8 ean: 4048962462418 sr: FISCHER 564616 sr_no_br: 564616 sr_no_br_cl: 564616 sr_cl: FISCHER564616 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 70 mm Overall length 155 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M10 n: FISCHER 564616 Piercing anchor FAZ II Plus 10/70 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 10/70 R stainless steel kpn: 564616 kpn_dash: kpn_clear: 564616 bkpn: FISCHER 564616 bkpn_clear: FISCHER 564616 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564616 sr_ns: FISCHER564616
r: 08096919 p: 5.19 pid: 176313 b: FISCHER q: 0 st: lt: 8 ean: 4048962462845 sr: FISCHER 564659 sr_no_br: 564659 sr_no_br_cl: 564659 sr_cl: FISCHER564659 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 180 mm Overall length 280 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M12 n: FISCHER 564659 Piercing anchor FAZ II Plus 12/180 GS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 12/180 GS EV electrolytically galvanised steel kpn: 564659 kpn_dash: kpn_clear: 564659 bkpn: FISCHER 564659 bkpn_clear: FISCHER 564659 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564659 sr_ns: FISCHER564659
r: 08096933 p: 5.12 pid: 176273 b: FISCHER q: 0 st: lt: 8 ean: 4048962462449 sr: FISCHER 564619 sr_no_br: 564619 sr_no_br_cl: 564619 sr_cl: FISCHER564619 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 10 mm Overall length 110 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M12 n: FISCHER 564619 Piercing anchor FAZ II Plus 12/10 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 12/10 R stainless steel kpn: 564619 kpn_dash: kpn_clear: 564619 bkpn: FISCHER 564619 bkpn_clear: FISCHER 564619 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564619 sr_ns: FISCHER564619
r: 08096954 p: 4.9 pid: 176328 b: FISCHER q: 0 st: lt: 8 ean: 4048962463170 sr: FISCHER 564692 sr_no_br: 564692 sr_no_br_cl: 564692 sr_cl: FISCHER564692 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 20 mm Overall length 105 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M10 n: FISCHER 564692 Piercing anchor FAZ II Plus 10/20 H R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With cap nut. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus H is the steel anchor for highest demands. The new sizes of the special cap nut version (M10 and M12) are also implemented in the ETA assessment and it is ideal for architecturally sophisticated applications. Thanks to variable anchorage depths and easy installation, the FAZ II Plus can be used in many different ways. The tried-and-trusted expansion clip securely feeds the loads into the concrete and ensures a high load-bearing-capacity. The FAZ II Plus H is the optimal solution (for example) for the anchorage of railings in visible areas: The cap nut, not only gives the option for a better and refined optical design but also, ensures an accident free installation due to its closed shape. Quick and easy assembly without the need for drill hole cleaning (M8-M24) Stainless steel: maximum safety for outdoor use Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The cap nut is implemented in the ETA assessment and it is ideal for architecturally sophisticated applications Due to its closed shape, the cap nut version ensures an accident free installation The cap nut is implemented in the ETA assessment and it is ideal for architecturally sophisticated applications Due to its closed shape, the cap nut version ensures an accident free installation Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus H is suitable for pre-positioned and push-through installation When applying the torque, the cone bolt is pulled into the expansion sleeve and expand it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Guard rails Consoles ds: dsc: kts: Piercing anchor FAZ II Plus 10/20 H R stainless steel kpn: 564692 kpn_dash: kpn_clear: 564692 bkpn: FISCHER 564692 bkpn_clear: FISCHER 564692 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564692 sr_ns: FISCHER564692
r: 87051273 p: 4.88 pid: 74351 b: FISCHER q: 0 st: lt: 8 ean: 4006209607169 sr: FISCHER 60716 sr_no_br: 60716 sr_no_br_cl: 60716 sr_cl: FISCHER60716 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 15 mm Overall length 79 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M8 n: FISCHER 60716 zykon anchor FZA 12 x 50 M8/15 electrolytically zinc-plated cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The fixing system with the highest safety in cracked concrete. The fischer ZYKON bolt anchor is an anchor made of zinc-plated steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the pre-positioned installation. The expansion sleeve is driven above the cone with the setting tool FZE Plus and fills the undercut drill hole with a positive fit. The fischer ZYKON bolt anchor FZA is ideal for fixing steel constructions, railings, and machines within internal areas in cracked concrete. Maximum safety due to a positive fit connection Low axial and edge distances due to expansion pressure-free installation Fast installation, no exchanging tools. This saves time and costs Power-saving installation with low setting energy ETA approval for cracked concrete and fire resistance class R 120 The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks The almost expansion-free installation of the anchor allows small edge distances and axial spacing, and thereby enables flexible use The FZUB special drill allows for a fast installation by creating the undercut without having to change tools The drill hole geometry allows for a very low setting energy, thus reducing the energy required for installation Suitable for The FZA is suitable for pre-positioned installation The undercut drill hole is created using the special FZUB drill Once the anchor has been placed in the drill hole, the expansion sleeve is driven over the cone using the FZE Plus setting tool, and the undercut drill hole is filled with a positive fit Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steelwork constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: zykon anchor FZA 12 x 50 M8/15 electrolytically zinc-plated kpn: 60716 kpn_dash: kpn_clear: 60716 bkpn: FISCHER 60716 bkpn_clear: FISCHER 60716 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 60716 sr_ns: FISCHER60716
r: 02137232 p: 4.8 pid: 22242 b: FISCHER q: 0 st: lt: 8 ean: 4048962087444 sr: FISCHER 507561 sr_no_br: 507561 sr_no_br_cl: 507561 sr_cl: FISCHER507561 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 8 mm Effective length -/5 mm Overall length 126 mm Material (bolt) Stainless steel A4 Thread designation M8 n: FISCHER 507561 rapid-action anchor FBN II 10/50 stainless steel R cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing for flexible use in non-cracked concrete The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside. The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 10/50 stainless steel R kpn: 507561 kpn_dash: kpn_clear: 507561 bkpn: FISCHER 507561 bkpn_clear: FISCHER 507561 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 507561 sr_ns: FISCHER507561
r: 08096913 p: 4.77 pid: 176297 b: FISCHER q: 0 st: lt: 8 ean: 4048962463057 sr: FISCHER 564680 sr_no_br: 564680 sr_no_br_cl: 564680 sr_cl: FISCHER564680 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 20 mm Overall length 100 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M12 n: FISCHER 564680 Piercing anchor FAZ II Plus 12/20 K R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 12/20 K R stainless steel kpn: 564680 kpn_dash: kpn_clear: 564680 bkpn: FISCHER 564680 bkpn_clear: FISCHER 564680 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564680 sr_ns: FISCHER564680
r: 08096922 p: 4.76 pid: 176312 b: FISCHER q: 0 st: lt: 8 ean: 4048962462838 sr: FISCHER 564658 sr_no_br: 564658 sr_no_br_cl: 564658 sr_cl: FISCHER564658 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 160 mm Overall length 260 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M12 n: FISCHER 564658 Piercing anchor FAZ II Plus 12/160 GS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 12/160 GS EV electrolytically galvanised steel kpn: 564658 kpn_dash: kpn_clear: 564658 bkpn: FISCHER 564658 bkpn_clear: FISCHER 564658 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564658 sr_ns: FISCHER564658
r: 87051145 p: 4.73 pid: 75234 b: FISCHER q: 0 st: lt: 1 ean: 4006209455777 sr: FISCHER 45577 sr_no_br: 45577 sr_no_br_cl: 45577 sr_cl: FISCHER45577 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 20 mm Effective length -/10 mm Overall length 142 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M20 n: FISCHER 45577 rapid-action anchor FBN II 20/10 K electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description Short and strong: the cost-efficient fixing made of galvanised steel for use in non-cracked concrete. The fischer bolt anchor FBN II K is a steel anchor for cost-effective fixings in non-cracked concrete. The short version is suitable for pre-positioned installation and push-through installation. The bolt anchor is made of zinc-plated steel and is recommended for railings, handrails or consoles in indoor areas. Maximum load-bearing capacity in non-cracked concrete. This means: fewer fixing points and smaller anchor plates Simple assembly due to few taps and minimal slippage The drive-in pin protects the thread from damage. This saves time during installation and removal Ideal for high loads The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 20/10 K electrolytically galvanised steel kpn: 45577 kpn_dash: kpn_clear: 45577 bkpn: FISCHER 45577 bkpn_clear: FISCHER 45577 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 45577 sr_ns: FISCHER45577
r: 08096934 p: 4.61 pid: 176324 b: FISCHER q: 0 st: lt: 10 ean: 4048962463040 sr: FISCHER 564679 sr_no_br: 564679 sr_no_br_cl: 564679 sr_cl: FISCHER564679 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 10 mm Overall length 90 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M12 n: FISCHER 564679 Piercing anchor FAZ II Plus 12/10 K R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 12/10 K R stainless steel kpn: 564679 kpn_dash: kpn_clear: 564679 bkpn: FISCHER 564679 bkpn_clear: FISCHER 564679 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564679 sr_ns: FISCHER564679
r: 08096945 p: 4.58 pid: 176349 b: FISCHER q: 0 st: lt: 8 ean: 4048962462401 sr: FISCHER 564615 sr_no_br: 564615 sr_no_br_cl: 564615 sr_cl: FISCHER564615 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 50 mm Overall length 135 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M10 n: FISCHER 564615 Piercing anchor FAZ II Plus 10/50 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 10/50 R stainless steel kpn: 564615 kpn_dash: kpn_clear: 564615 bkpn: FISCHER 564615 bkpn_clear: FISCHER 564615 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564615 sr_ns: FISCHER564615
r: 08096923 p: 4.49 pid: 176298 b: FISCHER q: 0 st: lt: 8 ean: 4048962462173 sr: FISCHER 564592 sr_no_br: 564592 sr_no_br_cl: 564592 sr_cl: FISCHER564592 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 160 mm Overall length 260 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M12 n: FISCHER 564592 Piercing anchor FAZ II Plus 12/160 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 12/160 EV electrolytically galvanised steel kpn: 564592 kpn_dash: kpn_clear: 564592 bkpn: FISCHER 564592 bkpn_clear: FISCHER 564592 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564592 sr_ns: FISCHER564592
r: 87051274 p: 4.24 pid: 74361 b: FISCHER q: 0 st: lt: 8 ean: 4006209607183 sr: FISCHER 60718 sr_no_br: 60718 sr_no_br_cl: 60718 sr_cl: FISCHER60718 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 14 mm Effective length 25 mm Overall length 79 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M10 n: FISCHER 60718 zykon anchor FZA 14 x 40 M10/25 electrolytically galvanised cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The fixing system with the highest safety in cracked concrete. The fischer ZYKON bolt anchor is an anchor made of zinc-plated steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the pre-positioned installation. The expansion sleeve is driven above the cone with the setting tool FZE Plus and fills the undercut drill hole with a positive fit. The fischer ZYKON bolt anchor FZA is ideal for fixing steel constructions, railings, and machines within internal areas in cracked concrete. Maximum safety due to a positive fit connection Low axial and edge distances due to expansion pressure-free installation Fast installation, no exchanging tools. This saves time and costs Power-saving installation with low setting energy ETA approval for cracked concrete and fire resistance class R 120 The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks The almost expansion-free installation of the anchor allows small edge distances and axial spacing, and thereby enables flexible use The FZUB special drill allows for a fast installation by creating the undercut without having to change tools The drill hole geometry allows for a very low setting energy, thus reducing the energy required for installation Suitable for The FZA is suitable for pre-positioned installation The undercut drill hole is created using the special FZUB drill Once the anchor has been placed in the drill hole, the expansion sleeve is driven over the cone using the FZE Plus setting tool, and the undercut drill hole is filled with a positive fit Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steelwork constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: zykon anchor FZA 14 x 40 M10/25 electrolytically galvanised kpn: 60718 kpn_dash: kpn_clear: 60718 bkpn: FISCHER 60718 bkpn_clear: FISCHER 60718 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 60718 sr_ns: FISCHER60718
r: 08096924 p: 4.23 pid: 176325 b: FISCHER q: 0 st: lt: 8 ean: 4048962462821 sr: FISCHER 564657 sr_no_br: 564657 sr_no_br_cl: 564657 sr_cl: FISCHER564657 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 140 mm Overall length 240 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M12 n: FISCHER 564657 Piercing anchor FAZ II Plus 12/140 GS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 12/140 GS EV electrolytically galvanised steel kpn: 564657 kpn_dash: kpn_clear: 564657 bkpn: FISCHER 564657 bkpn_clear: FISCHER 564657 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564657 sr_ns: FISCHER564657
r: 08096927 p: 4.23 pid: 176309 b: FISCHER q: 0 st: lt: 8 ean: 4048962462807 sr: FISCHER 564655 sr_no_br: 564655 sr_no_br_cl: 564655 sr_cl: FISCHER564655 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 120 mm Overall length 220 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M12 n: FISCHER 564655 Piercing anchor FAZ II Plus 12/120 GS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 12/120 GS EV electrolytically galvanised steel kpn: 564655 kpn_dash: kpn_clear: 564655 bkpn: FISCHER 564655 bkpn_clear: FISCHER 564655 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564655 sr_ns: FISCHER564655
r: 08096949 p: 4.08 pid: 176321 b: FISCHER q: 0 st: lt: 8 ean: 4048962462913 sr: FISCHER 564666 sr_no_br: 564666 sr_no_br_cl: 564666 sr_cl: FISCHER564666 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 30 mm Overall length 115 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M10 n: FISCHER 564666 Piercing anchor FAZ II Plus 10/30 GS R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS stainless steel with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the stainless steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS stainless steel can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. The stainless steel version is used to fix loads in outdoor areas. For example, the steel anchor with large washer is ideal for fixing steel components or façade substructures with slots. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Stainless steel: maximum safety for outdoor use Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 10/30 GS R stainless steel kpn: 564666 kpn_dash: kpn_clear: 564666 bkpn: FISCHER 564666 bkpn_clear: FISCHER 564666 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564666 sr_ns: FISCHER564666
r: 87051125 p: 4.03 pid: 74448 b: FISCHER q: 0 st: lt: 1 ean: 4006209455654 sr: FISCHER 45565 sr_no_br: 45565 sr_no_br_cl: 45565 sr_cl: FISCHER45565 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 16 mm Effective length 50/65 mm Overall length 170 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M16 n: FISCHER 45565 rapid-action anchor FBN II 16/50 electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing for flexible use in non-cracked concrete. The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The zinc-plated steel version of the bolt anchor is suitable for fixing railings, cable trays, and consoles in internal areas. The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility Simple assembly due to few taps and minimal slippage The drive-in pin protects the thread from damage. This saves time during installation and removal The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 16/50 electrolytically galvanised steel kpn: 45565 kpn_dash: kpn_clear: 45565 bkpn: FISCHER 45565 bkpn_clear: FISCHER 45565 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 45565 sr_ns: FISCHER45565
r: 08096882 p: 4.03 pid: 176268 b: FISCHER q: 0 st: lt: 8 ean: 4048962462210 sr: FISCHER 564596 sr_no_br: 564596 sr_no_br_cl: 564596 sr_cl: FISCHER564596 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 16 mm Effective length 50 mm Overall length 173 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M16 n: FISCHER 564596 Piercing anchor FAZ II Plus 16/50 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs New ETA confirms the use of FAZ II Plus for the dynamic load of components for diameters M16-M24 under direct load Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 16/50 EV electrolytically galvanised steel kpn: 564596 kpn_dash: kpn_clear: 564596 bkpn: FISCHER 564596 bkpn_clear: FISCHER 564596 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564596 sr_ns: FISCHER564596
