r: 08096963 p: 0.96 pid: 176348 b: FISCHER q: 0 st: lt: 8 ean: 4048962462975 sr: FISCHER 564672 sr_no_br: 564672 sr_no_br_cl: 564672 sr_cl: FISCHER564672 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 10 mm Overall length 75 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M10 n: FISCHER 564672 Piercing anchor FAZ II Plus 10/10 K EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 10/10 K EV electrolytically galvanised steel kpn: 564672 kpn_dash: kpn_clear: 564672 bkpn: FISCHER 564672 bkpn_clear: FISCHER 564672 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564672 sr_ns: FISCHER564672
r: 03294159 p: 0.95 pid: 176168 b: FISCHER q: 0 st: lt: 6 ean: 4048962462005 sr: FISCHER 564575 sr_no_br: 564575 sr_no_br_cl: 564575 sr_cl: FISCHER564575 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 8 mm Effective length 30 mm Overall length 95 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M8 n: FISCHER 564575 Piercing anchor FAZ II Plus 8/30 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 8/30 EV electrolytically galvanised steel kpn: 564575 kpn_dash: kpn_clear: 564575 bkpn: FISCHER 564575 bkpn_clear: FISCHER 564575 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564575 sr_ns: FISCHER564575
r: 87051139 p: 0.84 pid: 75741 b: FISCHER q: 0 st: lt: 6 ean: 4006209409473 sr: FISCHER 40947 sr_no_br: 40947 sr_no_br_cl: 40947 sr_cl: FISCHER40947 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length -/10 mm Overall length 76 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M10 n: FISCHER 40947 rapid-action anchor FBN II 10/10 K electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing for flexible use in non-cracked concrete The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside. The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 10/10 K electrolytically galvanised steel kpn: 40947 kpn_dash: kpn_clear: 40947 bkpn: FISCHER 40947 bkpn_clear: FISCHER 40947 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 40947 sr_ns: FISCHER40947
r: 08096865 p: 0.81 pid: 176221 b: FISCHER q: 0 st: lt: 8 ean: 4048962461992 sr: FISCHER 564574 sr_no_br: 564574 sr_no_br_cl: 564574 sr_cl: FISCHER564574 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 8 mm Effective length 10 mm Overall length 75 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M8 n: FISCHER 564574 Piercing anchor FAZ II Plus 8/10 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 8/10 EV electrolytically galvanised steel kpn: 564574 kpn_dash: kpn_clear: 564574 bkpn: FISCHER 564574 bkpn_clear: FISCHER 564574 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564574 sr_ns: FISCHER564574
r: 08096855 p: 0.77 pid: 176243 b: FISCHER q: 0 st: lt: 8 ean: 4048962462968 sr: FISCHER 564671 sr_no_br: 564671 sr_no_br_cl: 564671 sr_cl: FISCHER564671 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 8 mm Effective length 5 mm Overall length 60 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M8 n: FISCHER 564671 Piercing anchor FAZ II Plus 8/5 K EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 8/5 K EV electrolytically galvanised steel kpn: 564671 kpn_dash: kpn_clear: 564671 bkpn: FISCHER 564671 bkpn_clear: FISCHER 564671 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564671 sr_ns: FISCHER564671
r: 08096867 p: 0.76 pid: 176251 b: FISCHER q: 0 st: lt: 8 ean: 4048962461985 sr: FISCHER 564573 sr_no_br: 564573 sr_no_br_cl: 564573 sr_cl: FISCHER564573 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 6 mm Effective length 20 mm Overall length 75 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M6 n: FISCHER 564573 Piercing anchor FAZ II Plus 6/20 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands, now with even higher tensile strengths. Heavy loads can be secured in cracked concrete using the steel anchor. The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity. For example, the steel anchor is ideal for the anchoring of railings, cable trays, and consoles. Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Millimeter accurate adjustment to the loads due to the variable anchoring depths The first bolt anchor M6 with ETA evaluation option 1: for safe approved anchorages The tried-and-tested expansion clip ensures highest load capacity even with size M6 Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 6/20 EV electrolytically galvanised steel kpn: 564573 kpn_dash: kpn_clear: 564573 bkpn: FISCHER 564573 bkpn_clear: FISCHER 564573 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564573 sr_ns: FISCHER564573
r: 87051106 p: 0.69 pid: 74119 b: FISCHER q: 0 st: lt: 3 ean: 4006209407004 sr: FISCHER 40700 sr_no_br: 40700 sr_no_br_cl: 40700 sr_cl: FISCHER40700 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 8 mm Effective length 30/40 mm Overall length 91 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M8 n: FISCHER 40700 rapid-action anchor FBN II 8/30 electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing for flexible use in non-cracked concrete The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside. The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 8/30 electrolytically galvanised steel kpn: 40700 kpn_dash: kpn_clear: 40700 bkpn: FISCHER 40700 bkpn_clear: FISCHER 40700 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 40700 sr_ns: FISCHER40700
r: 87051105 p: 0.65 pid: 74420 b: FISCHER q: 0 st: lt: 4 ean: 4006209406694 sr: FISCHER 40669 sr_no_br: 40669 sr_no_br_cl: 40669 sr_cl: FISCHER40669 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 8 mm Effective length 20/30 mm Overall length 81 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M8 n: FISCHER 40669 rapid-action anchor FBN II 8/20 electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing for flexible use in non-cracked concrete The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside. The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 8/20 electrolytically galvanised steel kpn: 40669 kpn_dash: kpn_clear: 40669 bkpn: FISCHER 40669 bkpn_clear: FISCHER 40669 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 40669 sr_ns: FISCHER40669
r: 02019771 p: 0.63 pid: 15977 b: FISCHER q: 0 st: lt: 8 ean: 4006209460221 sr: FISCHER 46022 sr_no_br: 46022 sr_no_br_cl: 46022 sr_cl: FISCHER46022 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 6 mm Effective length 10 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M8 n: FISCHER 46022 nail anchor FNA II 6x30/10 M6 nut electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The installation-friendly Hammerset anchor with thread and flange nut for multiple fixings. The fischer nail anchor FNA II 6 with thread and flange nut is made of zinc-plated steel. The FNA II is set in a time-saving manner in the push-through or pre-positioned installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail anchor FNA II with thread and flange nut is suitable for fixing metal clamps for conduits and pipes in internal areas. Hammerset installation saves time No reinforcement hits due to low anchorage depth This saves time and costs during series installation Expansion clip provides a firm hold ETA approval for multiple fixings Easy removal of fire protection board without damage Reusability of fire protection board Safe anchorage, particularly when exposed to vibration, wind, and pushing/pulling influences Low anchoring depth (30 mm) Convenient installation without torque-controlled setting tool Approved system that has proven itself one million times over Suitable for The washer significantly increases the pulling forces and, at the same time, prevents the damage of the panel during removal Removal by means of easy pinching off of nail head thanks to special 2-stage pliers For fast installation, use the compressed air setting device (item no. 093731) Building materials Concrete C12/15 to C50/60, cracked and non-cracked For multi-point fixings of non-load-bearing systems Application Fire protection plates Fire protection boards Ventilation systems Wire and Nonius hangers Mounting rails Metal clamps Substructures made of wood and metal ds: dsc: kts: nail anchor FNA II 6x30/10 M6 nut electrolytically galvanised steel kpn: 46022 kpn_dash: kpn_clear: 46022 bkpn: FISCHER 46022 bkpn_clear: FISCHER 46022 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 46022 sr_ns: FISCHER46022
r: 08096869 p: 0.63 pid: 176237 b: FISCHER q: 0 st: lt: 8 ean: 4048962461978 sr: FISCHER 564572 sr_no_br: 564572 sr_no_br_cl: 564572 sr_cl: FISCHER564572 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 6 mm Effective length 10 mm Overall length 65 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M6 n: FISCHER 564572 Piercing anchor FAZ II Plus 6/10 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands, now with even higher tensile strengths. Heavy loads can be secured in cracked concrete using the steel anchor. The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity. For example, the steel anchor is ideal for the anchoring of railings, cable trays, and consoles. Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Millimeter accurate adjustment to the loads due to the variable anchoring depths The first bolt anchor M6 with ETA evaluation option 1: for safe approved anchorages The tried-and-tested expansion clip ensures highest load capacity even with size M6 Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 6/10 EV electrolytically galvanised steel kpn: 564572 kpn_dash: kpn_clear: 564572 bkpn: FISCHER 564572 bkpn_clear: FISCHER 564572 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564572 sr_ns: FISCHER564572
r: 02019758 p: 0.62 pid: 95638 b: FISCHER q: 0 st: lt: 8 ean: 4006209441091 sr: FISCHER 44109 sr_no_br: 44109 sr_no_br_cl: 44109 sr_cl: FISCHER44109 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 6 mm Effective length 5 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M6 n: FISCHER 44109 nail anchor FNA II 6x30 M6/5 with nut electrolytically zinc plated cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The installation-friendly Hammerset anchor with thread and flange nut for multiple fixings. The fischer nail anchor FNA II 6 with thread and flange nut is made of zinc-plated steel. The FNA II is set in a time-saving manner in the push-through or pre-positioned installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail anchor FNA II with thread and flange nut is suitable for fixing metal clamps for conduits and pipes in internal areas. Hammerset installation saves time No reinforcement hits due to low anchorage depth This saves time and costs during series installation Expansion clip provides a firm hold ETA approval for multiple fixings Easy removal of fire protection board without damage Reusability of fire protection board Safe anchorage, particularly when exposed to vibration, wind, and pushing/pulling influences Low anchoring depth (30 mm) Convenient installation without torque-controlled setting tool Approved system that has proven itself one million times over Suitable for The washer significantly increases the pulling forces and, at the same time, prevents the damage of the panel during removal Removal by means of easy pinching off of nail head thanks to special 2-stage pliers For fast installation, use the compressed air setting device (item no. 093731) Building materials Concrete C12/15 to C50/60, cracked and non-cracked For multi-point fixings of non-load-bearing systems Application Fire protection plates Fire protection boards Ventilation systems Wire and Nonius hangers Mounting rails Metal clamps Substructures made of wood and metal ds: dsc: kts: nail anchor FNA II 6x30 M6/5 with nut electrolytically zinc plated kpn: 44109 kpn_dash: kpn_clear: 44109 bkpn: FISCHER 44109 bkpn_clear: FISCHER 44109 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 44109 sr_ns: FISCHER44109
r: 02063032 p: 0.61 pid: 176198 b: FISCHER q: 0 st: lt: 5 ean: 4048962070255 sr: FISCHER 505528 sr_no_br: 505528 sr_no_br_cl: 505528 sr_cl: FISCHER505528 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 6 mm Effective length 30 mm Overall length 75 mm Thread designation M6 n: FISCHER 505528 rapid-action anchor FBN II 6/30 electrolytically galvanised cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing for flexible use in non-cracked concrete. The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The zinc-plated steel version of the bolt anchor is suitable for fixing railings, cable trays, and consoles in internal areas. Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility Simple assembly due to few taps and minimal slippage The drive-in pin protects the thread from damage. This saves time during installation and removal The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 6/30 electrolytically galvanised kpn: 505528 kpn_dash: kpn_clear: 505528 bkpn: FISCHER 505528 bkpn_clear: FISCHER 505528 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 505528 sr_ns: FISCHER505528
r: 02019755 p: 0.59 pid: 16126 b: FISCHER q: 0 st: lt: 8 ean: 4006209441114 sr: FISCHER 44111 sr_no_br: 44111 sr_no_br_cl: 44111 sr_cl: FISCHER44111 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 6 mm Effective length 5 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M6 n: FISCHER 44111 nail anchor FNA II 6x25 M6/5 with nut electrolytically zinc plated cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The installation-friendly Hammerset anchor with thread and flange nut for multiple fixings. The fischer nail anchor FNA II 6 with thread and flange nut is made of zinc-plated steel. The FNA II is set in a time-saving manner in the push-through or pre-positioned installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail anchor FNA II with thread and flange nut is suitable for fixing metal clamps for conduits and pipes in internal areas. Hammerset installation saves time No reinforcement hits due to low anchorage depth This saves time and costs during series installation Expansion clip provides a firm hold ETA approval for multiple fixings Easy removal of fire protection board without damage Reusability of fire protection board Safe anchorage, particularly when exposed to vibration, wind, and pushing/pulling influences Low anchoring depth (30 mm) Convenient installation without torque-controlled setting tool Approved system that has proven itself one million times over Suitable for The washer significantly increases the pulling forces and, at the same time, prevents the damage of the panel during removal Removal by means of easy pinching off of nail head thanks to special 2-stage pliers For fast installation, use the compressed air setting device (item no. 093731) Building materials Concrete C12/15 to C50/60, cracked and non-cracked For multi-point fixings of non-load-bearing systems Application Fire protection plates Fire protection boards Ventilation systems Wire and Nonius hangers Mounting rails Metal clamps Substructures made of wood and metal ds: dsc: kts: nail anchor FNA II 6x25 M6/5 with nut electrolytically zinc plated kpn: 44111 kpn_dash: kpn_clear: 44111 bkpn: FISCHER 44111 bkpn_clear: FISCHER 44111 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 44111 sr_ns: FISCHER44111
r: 87051190 p: 2.73 pid: 75772 b: FISCHER q: 0 st: lt: 8 ean: 4006209977446 sr: FISCHER 97744 sr_no_br: 97744 sr_no_br_cl: 97744 sr_cl: FISCHER97744 sr_dash: sold: 819 p_range: none type: standard act: 1 avo: av: Drilling diameter 12 mm Effective length 35 mm Overall length 132 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M12 n: FISCHER EXPRESS-ANKER 12/35X136 EXA12/35 ZN express anchor EXA 12/35 (12x136) electrolytically galvanised steel - 97744 cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description: The installation-friendly fixing for non-cracked concrete. The fischer bolt anchor EXA is a particularly installation-friendly steel anchor for anchorings in non-cracked concrete. In the zinc-plated steel design, the bolt anchor is suitable for the anchoring of railings, cantilevers, and cable trays inside. The two expansion clips increase the expansion range and reduce the torque slippage. This saves time during the installation process. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. Top Features The bolt anchor with the two expansion clips: fast, simple fixing. Less assembly time due to lower torque slippage. When hammering in, the drive-in pin protects the thread from damage. This saves time during installation and removal. Advantages The two clips increase the expansion range and reduce the torque slippage. This allows for a fast and simple installation. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. The short version EXA K*) can be used in thinner components due to the low anchorage depth. Applications Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades Versions Zinc-plated steel Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Functioning The EXA is suitable for pre-positioned and push-through installation. Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). When applying the torque, the cone bolt is pulled into the expansion clips and expands these against the drill hole wall. In the case of series installation, we recommend using the FABS bolt anchor setting tool. ds: dsc: kts: express anchor EXA 12/35 (12x136) electrolytically galvanised steel kpn: EXPRESS-ANKER 12/35X136 EXA12/35 ZN kpn_dash: EXPRESS kpn_clear: EXPRESSANKER1235X136EXA1235ZN bkpn: FISCHER EXPRESS-ANKER 12/35X136 EXA12/35 ZN bkpn_clear: FISCHER EXPRESSANKER1235X136EXA1235ZN c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 97744 sr_ns: FISCHER97744
r: 87051188 p: 2.21 pid: 75266 b: FISCHER q: 0 st: lt: 8 ean: 4006209977422 sr: FISCHER 97742 sr_no_br: 97742 sr_no_br_cl: 97742 sr_cl: FISCHER97742 sr_dash: sold: 442 p_range: none type: standard act: 1 avo: av: Drilling diameter 12 mm Effective length 5 mm Overall length 76 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M12 n: FISCHER EXPRESS-ANKER 12/5X80 EXA12/5 ZN express anchor EXA 12/5 (12x80) electrolytically galvanised steel - 97742 cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description: The installation-friendly fixing for non-cracked concrete. The fischer bolt anchor EXA is a particularly installation-friendly steel anchor for anchorings in non-cracked concrete. In the zinc-plated steel design, the bolt anchor is suitable for the anchoring of railings, cantilevers, and cable trays inside. The two expansion clips increase the expansion range and reduce the torque slippage. This saves time during the installation process. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. Top Features The bolt anchor with the two expansion clips: fast, simple fixing. Less assembly time due to lower torque slippage. When hammering in, the drive-in pin protects the thread from damage. This saves time during installation and removal. Advantages The two clips increase the expansion range and reduce the torque slippage. This allows for a fast and simple installation. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. The short version EXA K*) can be used in thinner components due to the low anchorage depth. Applications Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades Versions Zinc-plated steel Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Functioning The EXA is suitable for pre-positioned and push-through installation. Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). When applying the torque, the cone bolt is pulled into the expansion clips and expands these against the drill hole wall. In the case of series installation, we recommend using the FABS bolt anchor setting tool. ds: dsc: kts: express anchor EXA 12/5 (12x80) electrolytically galvanised steel kpn: EXPRESS-ANKER 12/5X80 EXA12/5 ZN kpn_dash: EXPRESS kpn_clear: EXPRESSANKER125X80EXA125ZN bkpn: FISCHER EXPRESS-ANKER 12/5X80 EXA12/5 ZN bkpn_clear: FISCHER EXPRESSANKER125X80EXA125ZN c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 97742 sr_ns: FISCHER97742
r: 87051183 p: 1.57 pid: 76279 b: FISCHER q: 0 st: lt: 8 ean: sr: FISCHER 97738 sr_no_br: 97738 sr_no_br_cl: 97738 sr_cl: FISCHER97738 sr_dash: sold: 314 p_range: none type: standard act: 1 avo: av: Drilling diameter 10 mm Thread designation M10 Effective length 15 mm Overall length 92 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated n: FISCHER EXPRESS-ANKER 10/15X92 EXA10/15 ZN express anchor EXA 10/15 (10x92) electrolytically galvanised steel - 97738 cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description: The installation-friendly fixing for non-cracked concrete. The fischer bolt anchor EXA is a particularly installation-friendly steel anchor for anchorings in non-cracked concrete. In the zinc-plated steel design, the bolt anchor is suitable for the anchoring of railings, cantilevers, and cable trays inside. The two expansion clips increase the expansion range and reduce the torque slippage. This saves time during the installation process. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. Top Features The bolt anchor with the two expansion clips: fast, simple fixing. Less assembly time due to lower torque slippage. When hammering in, the drive-in pin protects the thread from damage. This saves time during installation and removal. Advantages The two clips increase the expansion range and reduce the torque slippage. This allows for a fast and simple installation. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. The short version EXA K*) can be used in thinner components due to the low anchorage depth. Applications Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades Versions Zinc-plated steel Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Functioning The EXA is suitable for pre-positioned and push-through installation. Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). When applying the torque, the cone bolt is pulled into the expansion clips and expands these against the drill hole wall. In the case of series installation, we recommend using the FABS bolt anchor setting tool. ds: dsc: kts: express anchor EXA 10/15 (10x92) electrolytically galvanised steel kpn: EXPRESS-ANKER 10/15X92 EXA10/15 ZN kpn_dash: EXPRESS kpn_clear: EXPRESSANKER1015X92EXA1015ZN bkpn: FISCHER EXPRESS-ANKER 10/15X92 EXA10/15 ZN bkpn_clear: FISCHER EXPRESSANKER1015X92EXA1015ZN c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 97738 sr_ns: FISCHER97738
r: 87051205 p: 11.12 pid: 74324 b: FISCHER q: 0 st: lt: 8 ean: 4006209977576 sr: FISCHER 97757 sr_no_br: 97757 sr_no_br_cl: 97757 sr_cl: FISCHER97757 sr_dash: sold: 222.4 p_range: none type: standard act: 1 avo: av: Drilling diameter 20 mm Thread designation M20 Effective length 25 mm Overall length 172 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated n: FISCHER EXPRESS-ANKER 20/25X175 EXA20/25 ZN express anchor EXA 20/25 (20x175) electrolytically galvanised steel - 97757 cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description: The installation-friendly fixing for non-cracked concrete. The fischer bolt anchor EXA is a particularly installation-friendly steel anchor for anchorings in non-cracked concrete. In the zinc-plated steel design, the bolt anchor is suitable for the anchoring of railings, cantilevers, and cable trays inside. The two expansion clips increase the expansion range and reduce the torque slippage. This saves time during the installation process. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. Top Features The bolt anchor with the two expansion clips: fast, simple fixing. Less assembly time due to lower torque slippage. When hammering in, the drive-in pin protects the thread from damage. This saves time during installation and removal. Advantages The two clips increase the expansion range and reduce the torque slippage. This allows for a fast and simple installation. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. The short version EXA K*) can be used in thinner components due to the low anchorage depth. Applications Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades Versions Zinc-plated steel Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Functioning The EXA is suitable for pre-positioned and push-through installation. Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). When applying the torque, the cone bolt is pulled into the expansion clips and expands these against the drill hole wall. In the case of series installation, we recommend using the FABS bolt anchor setting tool. ds: dsc: kts: express anchor EXA 20/25 (20x175) electrolytically galvanised steel kpn: EXPRESS-ANKER 20/25X175 EXA20/25 ZN kpn_dash: EXPRESS kpn_clear: EXPRESSANKER2025X175EXA2025ZN bkpn: FISCHER EXPRESS-ANKER 20/25X175 EXA20/25 ZN bkpn_clear: FISCHER EXPRESSANKER2025X175EXA2025ZN c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 97757 sr_ns: FISCHER97757
r: 87051198 p: 4.39 pid: 75281 b: FISCHER q: 0 st: lt: 3 ean: 4006209977521 sr: FISCHER 97752 sr_no_br: 97752 sr_no_br_cl: 97752 sr_cl: FISCHER97752 sr_dash: sold: 175.6 p_range: none type: standard act: 1 avo: av: Drilling diameter 16 mm Effective length 30 mm Overall length 153 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M16 n: FISCHER EXPRESS-ANKER 16/30X153 EXA16/30 ZN express anchor EXA 16/30 (16x153) electrolytically galvanised steel - 97752 cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description: The installation-friendly fixing for non-cracked concrete. The fischer bolt anchor EXA is a particularly installation-friendly steel anchor for anchorings in non-cracked concrete. In the zinc-plated steel design, the bolt anchor is suitable for the anchoring of railings, cantilevers, and cable trays inside. The two expansion clips increase the expansion range and reduce the torque slippage. This saves time during the installation process. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. Top Features The bolt anchor with the two expansion clips: fast, simple fixing. Less assembly time due to lower torque slippage. When hammering in, the drive-in pin protects the thread from damage. This saves time during installation and removal. Advantages The two clips increase the expansion range and reduce the torque slippage. This allows for a fast and simple installation. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. The short version EXA K*) can be used in thinner components due to the low anchorage depth. Applications Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades Versions Zinc-plated steel Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Functioning The EXA is suitable for pre-positioned and push-through installation. Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). When applying the torque, the cone bolt is pulled into the expansion clips and expands these against the drill hole wall. In the case of series installation, we recommend using the FABS bolt anchor setting tool. ds: dsc: kts: express anchor EXA 16/30 (16x153) electrolytically galvanised steel kpn: EXPRESS-ANKER 16/30X153 EXA16/30 ZN kpn_dash: EXPRESS kpn_clear: EXPRESSANKER1630X153EXA1630ZN bkpn: FISCHER EXPRESS-ANKER 16/30X153 EXA16/30 ZN bkpn_clear: FISCHER EXPRESSANKER1630X153EXA1630ZN c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 97752 sr_ns: FISCHER97752
r: 87051197 p: 3.87 pid: 76292 b: FISCHER q: 0 st: lt: 8 ean: sr: FISCHER 97751 sr_no_br: 97751 sr_no_br_cl: 97751 sr_cl: FISCHER97751 sr_dash: sold: 154.8 p_range: none type: standard act: 1 avo: av: Drilling diameter 16 mm Thread designation M16 Effective length 10 mm Overall length 110 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated n: FISCHER EXPRESS-ANKER 16/10X110 EXA16/10 ZN express anchor EXA 16/10 (16x110) electrolytically galvanised steel - 97751 cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description: The installation-friendly fixing for non-cracked concrete. The fischer bolt anchor EXA is a particularly installation-friendly steel anchor for anchorings in non-cracked concrete. In the zinc-plated steel design, the bolt anchor is suitable for the anchoring of railings, cantilevers, and cable trays inside. The two expansion clips increase the expansion range and reduce the torque slippage. This saves time during the installation process. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. Top Features The bolt anchor with the two expansion clips: fast, simple fixing. Less assembly time due to lower torque slippage. When hammering in, the drive-in pin protects the thread from damage. This saves time during installation and removal. Advantages The two clips increase the expansion range and reduce the torque slippage. This allows for a fast and simple installation. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. The short version EXA K*) can be used in thinner components due to the low anchorage depth. Applications Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades Versions Zinc-plated steel Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Functioning The EXA is suitable for pre-positioned and push-through installation. Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). When applying the torque, the cone bolt is pulled into the expansion clips and expands these against the drill hole wall. In the case of series installation, we recommend using the FABS bolt anchor setting tool. ds: dsc: kts: express anchor EXA 16/10 (16x110) electrolytically galvanised steel kpn: EXPRESS-ANKER 16/10X110 EXA16/10 ZN kpn_dash: EXPRESS kpn_clear: EXPRESSANKER1610X110EXA1610ZN bkpn: FISCHER EXPRESS-ANKER 16/10X110 EXA16/10 ZN bkpn_clear: FISCHER EXPRESSANKER1610X110EXA1610ZN c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 97751 sr_ns: FISCHER97751
r: 87051186 p: 4.24 pid: 76286 b: FISCHER q: 0 st: lt: 8 ean: 4006209977415 sr: FISCHER 97741 sr_no_br: 97741 sr_no_br_cl: 97741 sr_cl: FISCHER97741 sr_dash: sold: 106 p_range: none type: standard act: 1 avo: av: Drilling diameter 10 mm Thread designation M10 Effective length 140 mm Overall length 217 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated n: FISCHER EXPRESS-ANKER 10/140X217 EXA10/140X217 express anchor EXA 10/140 (10x217) electrolytically galvanised steel - 97741 cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description: The installation-friendly fixing for non-cracked concrete. The fischer bolt anchor EXA is a particularly installation-friendly steel anchor for anchorings in non-cracked concrete. In the zinc-plated steel design, the bolt anchor is suitable for the anchoring of railings, cantilevers, and cable trays inside. The two expansion clips increase the expansion range and reduce the torque slippage. This saves time during the installation process. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. Top Features The bolt anchor with the two expansion clips: fast, simple fixing. Less assembly time due to lower torque slippage. When hammering in, the drive-in pin protects the thread from damage. This saves time during installation and removal. Advantages The two clips increase the expansion range and reduce the torque slippage. This allows for a fast and simple installation. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. The short version EXA K*) can be used in thinner components due to the low anchorage depth. Applications Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades Versions Zinc-plated steel Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Functioning The EXA is suitable for pre-positioned and push-through installation. Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). When applying the torque, the cone bolt is pulled into the expansion clips and expands these against the drill hole wall. In the case of series installation, we recommend using the FABS bolt anchor setting tool. ds: dsc: kts: express anchor EXA 10/140 (10x217) electrolytically galvanised steel kpn: EXPRESS-ANKER 10/140X217 EXA10/140X217 kpn_dash: EXPRESS kpn_clear: EXPRESSANKER10140X217EXA10140X217 bkpn: FISCHER EXPRESS-ANKER 10/140X217 EXA10/140X217 bkpn_clear: FISCHER EXPRESSANKER10140X217EXA10140X217 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 97741 sr_ns: FISCHER97741
