Product description
The versatile with multiple anchorage depth
The fischer frame fixing SXRL with up to three anchorage depths is approved for multiple fixings of non-structural systems in concrete, masonry and aerated concrete with the fischer countersunk screw. The SXRL 10 has also an approval for single-point fixing in concrete and the SXRL 14 for the stand for the stand-off installation of façades under a compression load. In perforated brick masonry, the two expansion zones of the plug apply force evenly; in aerated concrete and solid building materials, they unite to form one long expansion element. This ensures excellent load values. The extensive assortment with diameters of 8, 10 and 14 mm and anchor lengths of up to 360 mm enable diverse applications. The SXRL with the countersunk head screw is particularly recommended for fixing wood constructions.
- ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry
- The long expansion element with two anchorage depths makes the SXRL versatile
- Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials
- Simple to assemble: Ribs prevent plug rotation during installation
- The long expansion element with multiple anchorage depths of 50, 70 and 90 mm for SXRL 8 and SXRL 10 and 70 and 90 mm for SXRL 14 makes the SXRL an extremely versatile product
- Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole
- The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors
- When it is to be set deep, the longer ribs prevent the plug from turning during installation
- The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing
- The SXRL with effective lengths up to 290 mm provides the right plug for every application
Suitable for
- The SXRL is suitable for push-through installation
- In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force
- In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate
- Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer
Building materials
Approved for:
- Vertically perforated brick
- Aerated concrete
- Hollow blocks made from lightweight concrete
- Perforated sand-lime brick
- Thermal insulation blocks
- Solid block made from lightweight and normal weight concrete
- Solid brick
- Solid sand-lime brick
- Concrete >= C12/15
Also suitable for:
- Natural stone with dense structure
- Solid panel made from gypsum
Application
- Façade, ceiling and roof substructures made of wood and metal
- Facade substructures under compression load (e. g. distance installation without a wall bracket)
- Windows
- Gates and doors
- Wardrobes
- Kitchen hanging cabinets
- Squared timbers
- Beams
- TV consoles
- Wall covering
- Metal brackets
- Metal supports
- Cable ducts
- Cable trays
