FISCHER 44894 Safety anchor FH II 18/25 with hexagonal head electrolytically galvanised

Product description

Strong, safe and stylish anchoring with hexagonal head

• International approvals guarantee maximum safety and performance, also for applications in earthquake zones (seismic C1 and C2).
• The plastic ring prevents the anchor from rotating with it during mounting and thus guarantees correct dispersion.
• The relatively flat head of the bolt makes the anchor very discreet.
• The design between the bolt and the anchor sleeve ensures a high absorbable shear force. Fewer fastening points are therefore required.
• The optimised FH II geometry minimises the installation energy required to a few hammer blows, thus ensuring the highest ease of installation.
• The approval also includes the use of hollow drills.

The fischer Safety anchor FH II S with hexagonal head is a sleeve anchor made of galvanised steel. The anchor is inserted in the time-saving push-through assembly. When tightening the anchor, the cone is pulled into the spreader sleeve and tightens against the wall of the drilled hole. The black plastic ring prevents the anchor from turning with it and absorbs the tightening slip. As a result, the mounting piece is pulled against the anchoring ground. The fischer Safety anchor FH II S with hexagonal head is particularly suitable for fixing brackets, steel constructions and cable ducts in cracked and uncracked concrete.

Applications

• Handrails
• Stairs
• Brackets
• Steel constructions
• Ladders
• Cable trays
• Machinery
• Fencing
• Facade systems
• Railing

Building materials

Approved for:

• Concrete C20/25 to C50/60, cracked and uncracked

Also suitable for:

• Concrete C12/15
• High-density natural stone