FISCHER 40827 rapid-action anchor FBN II 10/10 electrolytically galvanised steel

Name: FISCHER 40827 rapid-action anchor FBN II 10/10 electrolytically galvanised steel
Brand: FISCHER
SKU: 87051110
Price: 0.86 EUR
Availability: InStock

Supplier number: FISCHER 40827 | EAN 4006209408278

0.86 tax incl.

€0.71 excl. VAT (incl. all environmental contributions)

On stock - immediately available

The minimum purchase order quantity for the product is 50.

Delivery by DHL

✆ Talk to a specialist

Secure fastening with Fischer anchors

Practical benefits

High load bearing performance: You achieve maximum load capacity in non-cracked concrete with standard or reduced anchorage depths.
Flexible and adaptable installation: The long thread balances component tolerances and allows you to perform fast push-through or stand-off fixings.
Fast driving with protection: You drive the anchor in with few hammer blows while the drive-in pin prevents thread damage.

In a nutshell

The right choise for

With the Fischer fbn II 10/10 bolt anchor, you achieve fast, high-load fastening in non-cracked concrete and dense natural stone. Made from zinc-plated steel with an M10 thread and an overall length of 86 mm, this anchor is ideal for securely fixing steel beams, brackets, railings, and indoor staircases. Requiring a 10 mm drill hole, it allows versatile push-through or pre-positioned installation directly on site. The drive-in pin protects the thread against damage while hammering, and the long thread easily accommodates component tolerances, giving you solid mechanical performance without the need for chemical anchors.

Product information

€0.86

In stock - tax incl.

Key features according to our expert

Diameter (drilled hole): 10 mm
Effective length: 10/20 mm
Overall length: 86 mm
Material (bolt): Steel
Surface treatment (bolt): Zinc plated
Thread designation: M10

Product description

The cost-efficient fixing for flexible use in non-cracked concrete

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside.

The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required
The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility
The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility
Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation
The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment

Suitable for

The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions
Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut)
When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall
The head embossing offers a simple control of the anchoring
In the case of series installation, we recommend using the FABS bolt anchor setting tool