festool_578108
festool_578108
festool_578108
festool_578108
festool_578108
festool_578108
festool_578108
festool_578108
festool_578108
festool_578108
festool_578108
festool_578108
festool_578108
festool_578108

FESTOOL TKS 80 EBS ST 840-SET table saw 254 mm 2200 W with length stop, sliding table and extension/expansion - 578108

FESTOOL
Supplier number: FESTOOL 578108 | EAN 4014549438473
Recommended Retail Price €5,572.62
4,978.88 tax incl.
€4,114.78 excl. VAT (incl. all environmental contributions)
On order: delivered from 27/10/2026

✆ Talk to a specialist

Consumables

Maximum cutting safety with Festool TKS 80

Practical benefits
  • Advanced active finger protection: Integrated SawStop technology stops the blade immediately upon skin contact to prevent serious cutting injuries.
  • Versatile large workpiece capacity: Using the supplied sliding table and extensions, you comfortably cut broad sheets with an 80 mm cutting depth.
  • Constant high cutting performance: The 2200 W motor equipped with constant speed electronics delivers smooth, reliable power under heavy loads.

In a nutshell

The right choise for

With the Festool tks 80 ebs st 840-SET table saw, you combine uncompromising cutting accuracy with active hand protection in your workshop. The integrated SawStop technology immediately stops the 254 mm saw blade upon skin contact and retracts it beneath the table surface to prevent severe injuries. Powered by a 2200 w motor with constant speed control, it effortlessly powers through solid timber and large sheet goods up to 80 mm depth at 90° and 56 mm at 45°. The included st 840 sliding table, table length extension, and table width extension allow you to handle wide panels with complete stability, while dual dust extraction keeps your workspace clean.



Product information Accessories FAQ
€4,978.88
tax incl.

Product information

Key features according to our expert

  • Power: 2200 W
  • Constant speed control: Yes
  • Weight: 38,4 kg
  • Saw blade diameter: 254 mm
  • Max. cutting capacity (right): 630 mm
  • Adjustment (rip fence): Clamping lever on guide rail
  • Number of keys (blade change): 1
  • With spindle lock: Yes
  • Adjustable riving knife: Yes
  • Variable speed: Yes
  • Included extensions: Sliding carriage; Table extension; Table widening
  • Engine brake: Yes
  • Max. no-load speed: 3500 rpm
  • Inrush current limiter: Yes
  • Max. cutting depth at 90°: 80 mm
  • Max. cutting depth at 45°: 56 mm
  • Max. cutting depth: 80 mm
  • With stand: Yes
  • Voltage: 230 V
  • Dust extraction position: Under and above the saw blade
  • Slide function: No

Scope of delivery

  • Circular saw blade WOOD UNIVERSAL HW 254 x 2
  • 4 x 30 W40
  • KT-TKS 80 cartridge
  • Angle stop
  • Dust extraction set
  • Extension table VB TKS 80
  • Guide extension VL TKS 80
  • LA TKS 80 stopper
  • Sliding table ST 840 TKS 80
  • Workpiece holder
  • Hex key
  • WAF 5
  • 1 open ended spanner
  • Size 50
  • 1 open ended spanner
  • Size 23

Product description

Your fingers - invaluable!

Every year approximately 4,000 people are injured on circular saws, corresponding to 16 injuries per working day. Around 26% of serious accidents even result in an accident pension (German Social Accident Insurance (DGUV) statistics 'Accidents at work 2017). With the new TKS 80 table saw, the risk of most serious cutting injuries during sawing is reduced. While you concentrate on your work, we protect your most valuable tools - your fingers.

  • Improved safety: Less risk for your fingers - The responsive sensor on the integrated SawStop AIM technology provides increased safety when sawing in non conductive materials.SawStop AIM technology can also be deactivated if necessary
  • Flexible: 80mm cutting height, extendable work surface, stopper and angle stop enable flexible work, even with large workpieces
  • Splinter free cuts: Fewer splinters on the upper surface of the material in mitre rip cuts by swivelling the saw blade to the left
  • Protects your health: Dust extraction attachment with CLEANTEC extraction sleeve for dust free work and a free view of the workpiece
  • Space saving: Tool garage attached on the side provides optimal storage space for saw blades, cartridges and push sticks

Ideally suited for

  • Cross cuts up to a width of 840 mm with sliding table, at a cutting depth of 20 mm
  • Rip cutting up to a cutting height of 80 mm and a width of 600 mm with an extension table
  • Tilting saw blade for angled cuts between -2° and 47°

All Features

Power
2200 W
Constant speed control
Yes
Weight
38,4 kg
Saw blade diameter
254 mm
Max. cutting capacity (right)
630 mm
Adjustment (rip fence)
Clamping lever on guide rail
Number of keys (blade change)
1
With spindle lock
Yes
Adjustable riving knife
Yes
Variable speed
Yes
Included extensions
Sliding carriage; Table extension; Table widening
Engine brake
Yes
Max. no-load speed
3500 rpm
Inrush current limiter
Yes
Max. cutting depth at 90°
80 mm
Max. cutting depth at 45°
56 mm
Max. cutting depth
80 mm
With stand
Yes
Voltage
230 V
Dust extraction position
Under and above the saw blade
Slide function
No
Drive type
Mains
Product weight without accessories
38.40 kg
Table dimensions
690 x 580 mm
Inclination
-2 / 47 °
Cutting height 90°/45°
80/56.00 mm
Dust extraction connection diameter
27/36 mm
Table height, legs unfolded
900.00 mm
Table height, legs folded away
385.00 mm
Idle engine speed
1700 - 3500 RPM
Cable length
4.00 m
Power consumption
2200 watt
Diameter of the saw blade
254.00 mm

Accessories

Frequently asked questions about this product

Answered by specialists
What is the maximum cutting depth of this table saw?
The maximum cutting depth is 80 mm at 90° and 56 mm at 45°.
Which table extensions are included in this set?
The set includes the ST 840 sliding table, VL TKS 80 table extension, VB TKS 80 table widener, and LA TKS 80 rip fence.
How does the integrated SawStop AIM technology work?
Upon skin contact, the saw blade stops within 5 milliseconds and retracts beneath the work surface via the cartridge.
Can the SawStop AIM function be deactivated for conductive materials?
Yes, you can deactivate the SawStop AIM safety feature to cut conductive materials.
What saw blade diameter is suitable for this machine?
The machine uses saw blades with a 254 mm diameter and a 30 mm bore.
Questions about this product?

Our product specialists are happy to help with any questions about this range. Call, email or chat with us!

Chat with us
0032 3 74 000 41 [email protected]

Viewed products

⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.