FESTOOL HW D40x4 disc groove cutter - 491059

Name: FESTOOL HW D40x4 disc groove cutter - 491059
Brand: FESTOOL
SKU: 02332334
Price: 29.8 EUR
Availability: PreOrder

Recommended Retail Price €35.32

29.80 tax incl.

€24.63 excl. VAT (incl. all environmental contributions)

FESTOOL HW D40x4 disc groove cutter - 491059

€29.80 Recommended Retail Price €35.32

On order: delivered from 25/09/2026

blister

Delivery by DHL

Product information

Mill accurate grooves effortlessly with Festool

Clean 4 mm groove cuts: This carbide groove cutter allows you to cut crisp, 4 mm wide slots for seals or parquet repairs.
Long-lasting carbide cutting edges: The hardened carbide edges retain their sharpness, giving you smooth and consistent performance through demanding woodwork.
Flexible routing depth options: You can easily adapt the cutting depth by pairing the disc with different spindles and bearings.

With the Festool hw D40X4 disc groove cutter, you can route clean, precise 4 mm wide slots directly into edges and end grain. Featuring durable carbide (HW) cutting edges, it prevents tear-out and maintains lasting sharpness across various woods. This milling disc, with a 40 mm diameter and a 6 mm bore, mounts easily onto a compatible cutter spindle. This allows you to adapt the cutting depth using guide bearings or your router parallel fence. It is the practical choice for fitting sealing profiles, weatherstripping, or carrying out parquet flooring repairs.

Product description

Disk groove cutter

The groove depth can be determined via three different cutter spindles. Variant 1 without a ball bearing must be used with a parallel side fence, variant 2 with a 16 mm ball bearing and variant 3 with a 28 mm ball bearing.

The carbide-tipped disc groove cutter is perfectly suited to creating grooves for seals or for parquet touch-up
Cutter replacement is done quickly and easily via a screw on the cutter spindle

Ideally suited for

Make grooves on the front using cutter discs with a cutter width of 1.5 mm to 5 mm
The milling discs can be combined with the cutter spindle without ball bearing or with a ball bearing Ø of 16 or 28 mm

Key features according to our expert