Benefits of the splinter guard
- Splinter-free: The rubber lip presses the material directly down on the cutting edge, minimizing splintering of the material.
- Precision: As the splinter guard is cut into upon the first use, it reflects the exact cutting edge, meaning it can be applied exactly at the scribe mark.
- Easy replacement: The replacement splinter guard is self-adhesive and can be easily cut to size.
Clean splinterfree cuts with Festool
- Tearout free cutting results: This replacement strip effectively prevents wood fibers from splintering, ensuring smooth and precise cut edges on every project.
- Clear cutline visibility: The transparent material gives you an unobstructed view of your pencil mark for effortless and accurate alignment.
- Easy custom trimming: With a total length of 5000 mm, you can easily trim the self-adhesive strip to fit your guide rail.
With the Festool fs-sp 5000/T splinter guard, you achieve clean and tear-out-free cuts on delicate surfaces such as veneered wood, laminate, and furniture panels. This self-adhesive replacement strip restores the cutting accuracy of your guide rail when the original edge becomes worn or damaged. Thanks to the transparent design, you maintain an unobstructed view of your scribe line for fast and precise rail alignment. With a total length of 5000 mm, you can easily trim the strip to fit your Festool FS, FS/2, FS/2 KP, or fsk guide rail. Simply apply it to the cleaned rail and cut through it on your first pass.
Product description
Splinter-free cuts.
The splinter guard prevents the edges from splintering, even with angled cuts. With its help, you can apply the guide rail exactly at the scribe mark. To be able to guarantee this permanently, it must be regularly replaced.
- Splinter-free cut - the rubber lip presses the material directly down on the cutting edge, thus minimising splintering of the material
- As the splinter guard is cut into upon the first use, it reflects the exact cutting edge, meaning that it can be applied exactly at the scribe mark
- The replacement splinter guard is self-adhesive and can be easily cut to size
Ideally suited for
- Replacement of a worn or damaged splinter guard
- For FS/2, FS/2 KP, FSK