- Accessory/Part type: Punch
Punches, dies and blades from Fein for nibblers and sheet metal shears
Fein punches, dies and blades are the wear parts of nibblers and sheet metal shears. With the right set, the cut stays clean and the machine keeps its capacity in sheet steel, stainless steel and profiled sheet.
Choose by the machine first: each part is made for a specific type of shear, such as the punch for the BLK 5.0 E nibbler or the wear plate for the BLK 1.6 LE. Then the material counts. There are punches and middle blades for sheet steel up to 400 N/mm² at a sheet thickness of 1.3 or 1.6 mm, punches and blades for stainless steel up to 800 N/mm², and dies for steel sheet up to 5 mm thick.
For trapezoidal profiles and corrugated sheets there is a die carrier, and a profile set bundles punch, die, wear plate, screws and key. Impact and table knives replace the cutting edges of sheet metal shears. Punches come singly or in packs of ten, so you can keep a stock for heavy cutting work. Replace punch and die together when the cut frays or the machine starts to labour. These parts belong to the Fein power tool accessories and spare parts.
- Accessory/Part type: Die and punch
- Accessory/Part type: Die and punch
- Accessory/Part type: Centre blade
- Accessory/Part type: Punch
- Accessory/Part type: Die
- Accessory/Part type: Die
- Accessory/Part type: Die and punch
- Accessory/Part type: Punch
- Accessory/Part type: Punch
- Accessory/Part type: Punch
FEIN 63601101009 impact knife and table knife for sheets up to 800 N/mm² with sheet thickness 1.6 mm
- Accessory/Part type: Replacement blade
- Accessory/Part type: Plate
- Accessory/Part type: Die
- Accessory/Part type: Punch
- Accessory/Part type: Die
- Accessory/Part type: Die
- Accessory/Part type: Die
- Accessory/Part type: Die
- Accessory/Part type: Die and punch