Expert pullers: 2-jaw, steering ball joint, battery

Expert 2-jaw pullers, ball joint puller set, battery terminal and wiper arm pullers

Expert pullers remove seized parts from a shaft, a pin or a terminal without hammering, in the garage and in mechanical maintenance. This category contains 2-jaw pullers, a steering ball joint puller set, a battery terminal puller and an extraction device for wiper arms.

The 2-jaw puller is the general choice for bearings, pulleys and gears. Choose it by its pulling force in tonnes, starting at 1 t on these pullers, and by the jaw spread relative to the part. Take a puller with spare capacity rather than one working at its limit, because an overloaded jaw can slip off. You turn the spindle with a spanner of the right size from the Expert spanners and spanner sets.

The other pullers are made for one job. The steering ball joint puller set presses a ball joint out of the steering knuckle without damaging the rubber boot. The battery terminal puller lifts a corroded clamp off the battery post, and the extraction device frees a wiper arm from its spindle. They keep you from damaging parts you want to reuse with a hammer or screwdriver.