- Accessory/Part type: Guide
Copying rings, edge guides and plasterboard bits for DeWalt routers
DeWalt copying rings, edge guides and plasterboard bits are the accessories that make a router more accurate and more versatile: routing along a template, parallel to an edge or through sheet material.
A copying ring runs along a template, so the cutter follows the shape of the jig exactly, for example for hinge recesses or repeated shapes. The rings come in diameters of 17, 24, 27, 30 and 40 mm. Choose the diameter by the cutter that has to pass through it, and check the machine type, because each ring fits a specific series of routers; the type 2 rings belong to different models than the standard rings. A universal edge guide with fine adjustment keeps the cutter at a fixed distance from the edge, for parallel grooves and rebates, and a circular guide routes circles.
Milling bits for plasterboard and for multi-material cut openings in sheet material, with a 1/8" (3.2 mm) or 1/4" (6.4 mm) shank, packed in fives. Choose by material and the machine's collet. To route straight along a rail, see DeWalt saw stands, guide rails and mounting brackets; the remaining accessories are grouped under DeWalt batteries, chargers, saw stands and guide rails.
- Diameter: 24 mm
- Accessory/Part type: Router bit
- Diameter: 30 mm
- Diameter: 17 mm
- Accessory/Part type: Router bit
- Diameter: 27 mm
- Accessory/Part type: Router bit
- Diameter: 40 mm
- Diameter: 30 mm