What is CRC Supercut II used for?

This low-viscosity cutting oil provides cooling and lubrication during drilling, milling, and tapping of ferrous and non-ferrous metals.

Can the aerosol be sprayed upside down?

Yes, the 360-degree valve allows spraying in all positions, including upside down.

Does this fluid protect against corrosion?

Yes, it helps prevent rust on newly machined metal surfaces.

What is the capacity of this can?

This aerosol can has a net volume of 250 ml.

How do you apply this cutting oil?

Shake well before use, spray from a short distance onto the cutting area, and reapply frequently during machining.

CRC Supercut II cutting oil 250 ml - 2030010_SP250

Supplier number: CRC 2030010_SP250 | EAN 5412386063800

18.95 tax incl.

€15.66 excl. VAT (incl. all environmental contributions)

On stock - immediately available

Delivery by DHL

↓ Documents (1) ✆ Talk to a specialist

Efficient cooling and smoother metal cutting

Practical benefits

Extended cutting tool life: Balanced lubrication minimizes friction and wear, allowing you to prolong the service life of drills and taps.
Fast heat dissipation during machining: Effective cooling lowers working temperatures, enabling you to cut and shape various metals at higher operating speeds.
Convenient multi-angle spray application: Equipped with a 360° valve, you can accurately apply lubricant even when holding the aerosol can upside down.

In a nutshell

The right choise for

With Crc Supercut II low-viscosity cutting oil spray 250 ml, you protect your cutting tools from wear and overheating. The balanced lubrication and effective cooling rapidly dissipate heat during drilling, tapping, milling, and sawing metal. This lowers working temperatures, allows you to machine ferrous and non-ferrous metals at higher speeds, and significantly extends the service life of your drills and taps. Thanks to the practical 360° valve, you can apply the cutting fluid accurately from any angle, even when holding the aerosol can upside down. It also helps prevent corrosion on newly machined metal surfaces.

Product information FAQ

€18.95

In stock - tax incl.

Key features according to our expert

Net volume: 250 ml
Principal hazard property: GHS02 Flammable
Relative density: 0,879
ADR packing group: Not applicable
ADR class: 2.1
Packaging: Spray can
UN number: UN1950
P-statements: P102; P210; P211; P251; P261; P280; P410 + P412; P501
H-statements: H223; H229; H317
Hazard class: GHS02 Flammable; GHS07 Harmful or irritant
Physical state: Aerosol
Flash point: > 170 °C

Product description:

Low-viscosity cutting oil for normal metal chipping and forming.
Non-chlorinated, high-performance cutting oil.
Limits friction and heat generation; facilitates chip removal and combines cooling and lubrication.
Tool life increases! Prevents rusting of freshly machined surfaces.

Precautionary statements

P102: Keep out of reach of children.
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211: Do not spray on an open flame or other ignition source.
P251: Do not pierce or burn, even after use.
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F.
P501: Dispose of contents/container to ... (see safety data sheet).

Hazard statements

H223: Flammable aerosol.
H229: Pressurised container: May burst if heated.
H317: May cause an allergic skin reaction.

Documents

⤓ Technical data sheet PDF

All Features

Net volume: 250 ml
Principal hazard property: GHS02 Flammable
Relative density: 0,879
Adr packing group: Not applicable
Adr class: 2.1
Packaging: Spray can
Un number: UN1950
P-statements: P102; P210; P211; P251; P261; P280; P410 + P412; P501
H-statements: H223; H229; H317
Hazard class: GHS02 Flammable; GHS07 Harmful or irritant
Physical state: Aerosol
Flash point: > 170 °C
Volume: 250 ml

Brand CRC
02750349
EAN 5412386063800
Supplier number CRC 2030010_SP250

Frequently asked questions about this product

Answered by specialists

What is CRC Supercut II used for?: This low-viscosity cutting oil provides cooling and lubrication during drilling, milling, and tapping of ferrous and non-ferrous metals.
Can the aerosol be sprayed upside down?: Yes, the 360-degree valve allows spraying in all positions, including upside down.
Does this fluid protect against corrosion?: Yes, it helps prevent rust on newly machined metal surfaces.
What is the capacity of this can?: This aerosol can has a net volume of 250 ml.
How do you apply this cutting oil?: Shake well before use, spray from a short distance onto the cutting area, and reapply frequently during machining.