r: 08123573 p: 10.702 pid: 166788 b: HG q: 0 st: lt: 8 ean: 8711577190804 sr: HG 449005103 sr_no_br: 449005103 sr_no_br_cl: 449005103 sr_cl: HG449005103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 50 ml EUH-statements EUH066 ADR packing group III ADR class 3 UN number UN3295 Packaging Bottle Principal hazard property GHS02 Flammable Conseils de prudence (P) P101; P102; P301 + P310; P331; P501 H-statements H226; H304 Hazard class GHS02 Flammable; GHS08 Health hazard Physical state Liquid Flash point 56 °C n: HG 449005103 natural stone colour thinner 50 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Restores the colour Deepens the colour Protects against dirt and wear With or without gloss of your choice Dark types of natural stone, such as dark granite, Belgian bluestone, blue stone, etc., will show wear through use, manifesting as dull, grey walkways or spots. HG natural stone colour diluter (product 48) is a professional product which deepens the colour of your natural stone and brings it back to life. In addition, this unique composition impregnates, nourishes and protects the natural stone against dirt and stains caused by water or other liquids. It does not make the surface slippery or disrupt the natural stone's breathing process. The darker the natural stone, the more effective the HG colour diluter. Instructions for use Clean the surface, preferably with HG tile cleaner extra strong (product 20), to ensure that the surface is completely clean, free of dust, grease, wax and polish Remove any cement and/or mortar residues with HG tile cement residue remover (product 11) or HG tile cement residue remover (product 12); for marble, Belgian bluestone and other calciferous natural stone, remove the lime and/or cement residue with HG natural stone cement residue remover (product 31) Then allow the surface to dry thoroughly For floors: allow to dry for 24 hours if underfloor heating is on Switch underfloor heating off 12 hours before treatment For other surfaces allow 24 hours drying time Wear gloves during application Put a small amount of HG colour diluent on the enclosed cloth, and apply the product to the surface in a circular motion Then rub HG colour thinner with a clean, lint-free cloth After a maximum of 5 to 10 minutes, the HG colour solvent is absorbed into the surface, after which the excess material must be removed very thoroughly with a dry cloth (possibly using white spirit) Repeat the treatment on highly absorbent surfaces until the surface no longer absorbs the product (colour dilution maximum) If gloss is desired, the surface should be buffed with a clean, dry lint-free cloth after 30-40 minutes After 4 hours the treated surface is usable/ walkable and fully loadable again after 3 days After use, clean the neck and cap well before closing the bottle, so that the cap can be easily removed for the next use Consumption: 50 ml is good for approx. 5 m² ds: dsc: kts: natural stone colour thinner 50 ml kpn: 449005103 kpn_dash: kpn_clear: 449005103 bkpn: HG 449005103 bkpn_clear: HG 449005103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 449005103 sr_ns: HG449005103
r: 08123566 p: 10.65 pid: 166778 b: HG q: 0 st: lt: 8 ean: 8711577007591 sr: HG 272010100 sr_no_br: 272010100 sr_no_br_cl: 272010100 sr_cl: HG272010100 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 100 ml EUH-statements EUH208 ADR packing group ADR class UN number Packaging Bottle Conseils de prudence (P) P101; P102 Physical state Liquid n: HG 272010100 natural stone countertop protector 100 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Protects against oil<, grease and dirt Good for 10 m² HG natural stone worktop protector forms an absolutely colourless and invisible protection, particularly against (edible) oils, vegetable and animal fats and many other types of soiling. The best protection is obtained on marble by applying HG natural stone kitchen top protector (product 35) (mainly protects against water-based soiling!) over the HG natural stone kitchen top protector. Application Natural stone kitchen top protector ds: dsc: kts: natural stone countertop protector 100 ml kpn: 272010100 kpn_dash: kpn_clear: 272010100 bkpn: HG 272010100 bkpn_clear: HG 272010100 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 272010100 sr_ns: HG272010100
r: 08123551 p: 10.2 pid: 166774 b: HG q: 0 st: lt: 8 ean: 8711577189440 sr: HG 113100103 sr_no_br: 113100103 sr_no_br_cl: 113100103 sr_cl: HG113100103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 1 l Packaging Bottle Physical state Liquid n: HG 113100103 plastic protector 1000 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Gives gloss HG plastic protector is a unique, easy-to-apply liquid polymer emulsion which, once dry, forms a shiny and wafer-thin, but extremely strong protective film. This protects plastic floors such as vinyl, linoleum, marmoleum, PVC and cast floors against wear, scratches and other damage. This protective film also masks already existing wear marks and also gives an anti-slip effect. Application HG synthetic floors protective film with gloss (product 77) is a unique and easy-to-apply polymer emulsion. After drying, this liquid emulsion forms a shiny and wafer-thin, but extremely strong protective film. It protects plastic floors such as vinyl, linoleum, marmoleum, PVC and cast floors against wear, scratches and other damage. This protective film for synthetic floors also masks existing wear marks and provides an anti-slip effect. 1 litre is good for approximately 40m2 per coat. Instructions for use Even with new plastic floors, the surface must be completely clean, grease- and dust-free Remove any old wax, polish and polymer layers For any necessary treatments: see the HG synthetic floor treatment matrix on the side of this bottle For good distribution, preferably use a wax dispenser (see the illustration on the front of this bottle) If desired, a clean, lint-free (tea) cloth wrapped around a squeegee can also be used Do not shake before use and pour the liquid undiluted over the floor and then spread it over the floor in one direction, without exerting pressure on the wax dispenser or squeegee When the product has dried, after about 60 minutes, a second coat can be applied at right angles to the first coat if necessary Approximately 1 to 2 hours after the last treatment, the floor can be walked on normally and is fully cured after 3 days Consumption: 40 m² per litre per coat ds: dsc: kts: plastic protector 1000 ml kpn: 113100103 kpn_dash: kpn_clear: 113100103 bkpn: HG 113100103 bkpn_clear: HG 113100103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 113100103 sr_ns: HG113100103
r: 08123612 p: 9.31 pid: 166866 b: HG q: 0 st: lt: 10 ean: 8711577308728 sr: HG 486050103 sr_no_br: 486050103 sr_no_br_cl: 486050103 sr_cl: HG486050103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 500 ml EUH-statements EUH208 ADR packing group ADR class Packaging Spray can UN number Conseils de prudence (P) P101; P102 Physical state Liquid n: HG 486050103 mould protector 500 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Prevents mould For tile silicone joints, stucco, etc. HG mould protector is a handy spray that prevents mould from developing. This makes it ideal for the bathroom and other places where mould quickly develops. This anti-fungal product effectively seals surfaces to moisture and air. This prevents mould from developing and keeps your bathroom mould-free. The convenient thing about this spray is that it is suitable for both smooth and porous surfaces. Application Mould protector Instructions for use If mould is already present on the surface to be treated, first remove it with HG fungus cleaner Before applying HG fungus protector, clean and dry the surface well Then apply the liquid opaquely and leave to dry for approx. 30-60 minutes On smooth surfaces, polish if necessary within 10 minutes after application Repeat the treatment at least once every 2 months One 500 ml bottle is good for 10-12 m² ds: dsc: kts: mould protector 500 ml kpn: 486050103 kpn_dash: kpn_clear: 486050103 bkpn: HG 486050103 bkpn_clear: HG 486050103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 486050103 sr_ns: HG486050103
r: 08123498 p: 9.06 pid: 166715 b: HG q: 0 st: lt: 8 ean: 8711577190958 sr: HG 476030103 sr_no_br: 476030103 sr_no_br_cl: 476030103 sr_cl: HG476030103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 250 ml ADR packing group II ADR class 3 Packaging Bottle Principal hazard property GHS02 Flammable UN number UN1993 Conseils de prudence (P) P101; P102; P210; P264; P305 + P351 + P338; P403 + P233; P501 H-statements H225; H319; H336 Hazard class GHS02 Flammable; GHS07 Harmful or irritant Physical state Liquid Flash point 18 °C n: HG 476030103 shower cabin protector 250 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Suitable for all types of materials Very easy to apply HG shower cabin protector protects all materials in and on the shower cabin against limescale and contamination from soap residue, shower cream, skin oils, etc. HG shower cabin protector makes the glass in the shower door/wall, the frame of the shower door/wall, tiles and taps water and dirt repellent, so that all these materials remain clean and beautiful for much longer. Less cleaning is required and cleaning will also be much easier. This product is very easy to apply and works very effectively for months. Instructions for use Clean the surfaces to be treated, such as tiles, (plexiglass) glass, chrome, plastic, aluminium or ceramic, beforehand and allow to dry thoroughly. Then apply a small amount of HG shower cabin protector to a clean, dry cloth and rub in with circular movements Repeat the treatment after approx. 2 minutes Then polish with a soft, dry cloth Rub glass surfaces with a damp cloth to a shine If this protector is applied, less cleaning will be necessary and cleaning will be much easier With normal use of your shower cabin or shower, it is sufficient to apply HG shower cabin protector once every 3 months ds: dsc: kts: shower cabin protector 250 ml kpn: 476030103 kpn_dash: kpn_clear: 476030103 bkpn: HG 476030103 bkpn_clear: HG 476030103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 476030103 sr_ns: HG476030103
r: 08123677 p: 8.44 pid: 166887 b: HG q: 0 st: lt: 8 ean: 8711577212940 sr: HG 647030103 sr_no_br: 647030103 sr_no_br_cl: 647030103 sr_cl: HG647030103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 300 ml ADR packing group ADR class UN number Packaging Bottle Conseils de prudence (P) P101; P102 Physical state Liquid Flash point >100 °C n: HG 647030103 waterproof 100% synthetic textile 300 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description For hand and machine washing Ideal for ski and rainwear HG waterproof 100% synthetic textile has been specially developed to make polyamide, polyester, nylon and other 100% synthetic textiles water- and dirt-repellent. This product is therefore ideal for making ski and rainwear, but also, for example, garden furniture covers, water- and dirt-repellent. Moreover, this highly concentrated product is very easy to use. The content of this bottle is sufficient for up to 3 kg of synthetic textiles. Instructions for use Hand wash The garment to be treated should be clean and dry Fill a bucket, tub or basin with approximately 6 litres of lukewarm water Dilute 100 ml of product for every kilo of laundry Then immerse the garment in this solution and turn it over regularly for 15 minutes Then rinse with cold water The effect of this product is enhanced by heat, therefore preferably iron the textile before it is completely dry or dry it in a tumble dryer. Check the washing instructions of the textile whether this is allowed, otherwise dry on a clothes-line Washing machine The clothes to be treated should be clean and dry Make sure the washing machine is not completely full (up to three-quarters of the drum height), as the laundry must be able to move freely in the drum The washing machine's soap dish should be completely free of detergent residues, so clean it first if necessary. Detergent breaks down the effect of HG waterproof 100% synthetic textiles Select the garment programme (without pre-wash) or, if the washing instructions recommend it, the delicate or wool programme (without pre-wash). Do not add detergent or fabric softener The temperature depends on the fabric care instructions, but should not exceed 40ºC Start the washing machine and, after about 15 seconds, add 100 ml of product for each kilo of textile to the running water via the soap dish If these 15 seconds are not waited and the product is added too early, it may end up directly in the washing machine drain because a washing machine drains water first in the first few seconds of a new programme Do not use the product in a washing ball Finish the wash programme completely The effect of this product is enhanced by heat, therefore preferably iron the textile before it is completely dry or dry it in a tumble dryer. Consult the washing instructions of the textile whether this is permitted, otherwise dry on a clothes line ds: dsc: kts: waterproof 100% synthetic textile 300 ml kpn: 647030103 kpn_dash: kpn_clear: 647030103 bkpn: HG 647030103 bkpn_clear: HG 647030103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 647030103 sr_ns: HG647030103
r: 08123479 p: 7.85 pid: 166701 b: HG q: 0 st: lt: 8 ean: 8711577017743 sr: HG 175030103 sr_no_br: 175030103 sr_no_br_cl: 175030103 sr_cl: HG175030103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 300 ml ADR packing group ADR class 2.1 UN number UN1950 Packaging Spray can Principal hazard property GHS02 Flammable Conseils de prudence (P) P101; P102; P210; P211; P251; P261; P271; P280; P312; P410 + P412; P501 H-statements H222; H229; H315; H319; H336; H411 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS09 Environmental hazard Physical state Aerosol Flash point <0 °C n: HG 175030103 protector textile and leather 300 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Protects against water, oil, grease and dirt With HG 4 in 1 protector for textiles and leather, you simply and effectively protect all types of textiles and leather. Besides the powerful water-repellent effect, this product also prevents oil, gravy, wine stains, etc. After treatment, accidents with these liquids can simply be dabbed away with an absorbent tissue. This product has countless applications, such as sofas, clothing, shoes and bags. Application HG water, oil, grease & dirt resistant for textiles protects textiles against most stains and at the same time makes the material water-repellent. Coffee stains, tea stains, oil stains, grease stains and wine stains can be simply dabbed away with an absorbent tissue after treatment with this product. Without this protection, liquids and dirt can penetrate deep into the fibres of textiles and then cause difficult or even impossible to remove stains. The product is suitable for, among others, garden furniture cushions, parasols, tents, furniture upholstery, curtains, rainwear and sportswear. Instructions for use Avoid inhalation of spray mist Use only outdoors or in a well-ventilated area Before use, test the surface for colourfastness at an inconspicuous place. Do not treat if the colour runs off The material to be treated must be clean and dry If the material to be treated is already coated, this may reduce the effectiveness of the product Hold the spray can upright and at a distance of approximately 20 cm, liberally spray HG 4 in 1 protector in even strips onto the surface to be treated Extreme overdosing (soaking) must be avoided After drying for approximately one hour, the treated material is again ready for use and perfectly protected To ensure lasting protection, repeat the treatment from time to time Consumption: The content of the can is sufficient for approx. 3.5 m2 ds: dsc: kts: protector textile and leather 300 ml kpn: 175030103 kpn_dash: kpn_clear: 175030103 bkpn: HG 175030103 bkpn_clear: HG 175030103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 175030103 sr_ns: HG175030103
r: 08123605 p: 6.87 pid: 166779 b: HG q: 0 st: lt: 8 ean: 8711577190965 sr: HG 482012303 sr_no_br: 482012303 sr_no_br_cl: 482012303 sr_cl: HG482012303 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 125 ml ADR packing group ADR class UN number Packaging Bottle Conseils de prudence (P) P101; P102 Physical state Liquid Flash point 200 °C n: HG 482012303 stainless steel protector 125 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Gives extra shine HG stainless steel protector is a ready-to-use maintenance and protection product for stainless steel surfaces. The product is very easy to apply and gives a streak-free shine that lasts for weeks. It is therefore ideal for use in the kitchen on stainless steel extractor hoods, chimneys, cooking hobs, rear walls, panels, etc. Application HG stainless steel quick shine makes stainless steel shine like never before and is indispensable in the kitchen. It is a ready-to-use maintenance and protective product that makes dull surfaces shine again. Moreover, it reduces the adhesion of dirt and grease to the surface, making maintenance considerably easier. The specially selected mineral oils ensure long-lasting results. The product can be used on extractor hoods, fireplaces, backsplashes, ovens, refrigerators and microwaves, among others. Instructions for use Drip a few drops of HG stainless steel protector onto a lint-free dry cloth and rub the surface evenly with it. If necessary, after drying for 2 minutes, rub again very lightly with a soft dry cloth ds: dsc: kts: stainless steel protector 125 ml kpn: 482012303 kpn_dash: kpn_clear: 482012303 bkpn: HG 482012303 bkpn_clear: HG 482012303 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 482012303 sr_ns: HG482012303
r: 08085329 p: 6.66 pid: 105722 b: SOUDAL q: 0 st: lt: 8 ean: 5411183177109 sr: SOUDAL 156468 sr_no_br: 156468 sr_no_br_cl: 156468 sr_cl: SOUDAL156468 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 600 ml EUH-statements EUH208; EUH210 ADR packing group ADR class UN number Physical state Liquid Packaging Sausage n: SOUDAL Soudatight SP coating white (600 ml) - 156468 cn: COATING cn2: COATING cn_clear: COATING d: Product description: Soudatight SP is the sprayable version of Soudatight LQ, only the glass fibres are logically omitted. This product can be very easily and quickly sprayed to form a liquid, air- and vapour-tight membrane on larger surfaces and on the connections between these surfaces (floor-wall, wall-ceiling, etc.). Forms a seamless elastic membrane after drying, which is an ideal base for painting or plastering. Best used in combination with Soudatight LQ for optimum results. Soudatight SP is applied using airless spray equipment. Properties: Air- and vapour-tight Very good adhesion to many porous materials Good adhesion on slightly damp substrates Permanently elastic after curing and very durable Can be painted over and plastered after drying Complies with GEV-EMICODE EC-1 PLUS: very low emission Applications: For air- and vapour-tight finishing of window connections, wall-floor connections, wall-ceiling connections and surfaces (no roof applications). Instructions for use: Make sure that Soudatight SP is at room temperature before use. Shake or stir well before use. Soudatight SP is applied to the substrate using airless or air-assisted spraying equipment directly from the packaging. The choice of spraying equipment, pressure, gun and spray tip depends on the application. Contact Soudal for further tailor-made information. Apply the air sealing paste undiluted and evenly in several layers (at least 2) to the substrate to a layer thickness of minimum 1 mm and maximum 3 mm. For best coverage, apply the product at a different angle the second time. It is recommended to apply the 2nd coat only after skin formation occurs with the first coat. The application thickness should be measured (wet) using a thickness gauge. For window applications ensure that the airtightness paste forms a seamless membrane of at least 3 mm on the window frame, over the flexible foam up to ± 5 cm on the day side of the building shell. The use of masking tape (on the window frame) is recommended. However, this should be removed shortly after application of Soudatight SP, before curing. For wall connections, ensure that the airtightness paste forms a seamless membrane of ± 15 cm on both surfaces. Before curing, Soudatight SP can be removed from materials and tools with water. ds: dsc: kts: coating white (600 ml) kpn: Soudatight SP kpn_dash: kpn_clear: SoudatightSP bkpn: SOUDAL Soudatight SP bkpn_clear: SOUDAL SoudatightSP c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal surface treatment and repair / Soudal other surface treatment / Soudal coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 156468 sr_ns: SOUDAL156468
r: 08123678 p: 4.77 pid: 166917 b: HG q: 0 st: lt: 8 ean: 8711577018658 sr: HG 177030103 sr_no_br: 177030103 sr_no_br_cl: 177030103 sr_cl: HG177030103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 300 ml ADR packing group ADR class Packaging Bottle Principal hazard property GHS07 Harmful or irritant UN number Conseils de prudence (P) P101; P102; P264; P302 + P352; P305 + P351 + P338; P501 H-statements H315; H319; H412 Hazard class GHS07 Harmful or irritant Physical state Liquid n: HG 177030103 waterproof textile 300 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description For hand and machine washing Ideal for (rain) coats HG waterproof cotton, linen, wool and mixed textiles has been specially developed to make cotton, linen, wool and mixed textiles (textiles made of partly natural materials such as cotton and partly synthetic materials such as polyamide or polyester) water- and dirt-repellent. This product is therefore ideal for making (rain) coats, children's clothing, jeans, furniture covers, garden furniture covers and tablecloths water- and dirt-repellent. Moreover, this highly concentrated product is very easy to use. The content of this bottle is sufficient for up to 3 kg of textiles. For best results, preferably use the hand-washing method. For applications on parasols, awnings, groundsheets or textiles made of 100% synthetic fibres, we recommend HG water, oil, grease and dirt repellent for textiles. Instructions for use Hand wash method The garment to be treated should be clean and dry Fill a bucket, tub or basin with approximately 6 litres of lukewarm water Mix the entire contents of this bottle with the water Then add the garment to this solution and turn it over regularly for 15 minutes Then rinse with cold water The effect of this product is enhanced by heat, therefore preferably iron the textile before it is completely dry or dry it in a tumble dryer. Check the washing instructions of the textile whether this is allowed, otherwise dry on a clothes-line Washing machine The clothes to be treated should be clean and dry The soap dish of the washing machine should be completely free of detergent residues, so clean it first if necessary. Detergent breaks down the effect of HG waterproof cotton, linen, wool and mixed textiles Select the garment programme (without pre-wash) or, if the washing instructions recommend it, the delicate or wool programme (without pre-wash). Do not add detergent or fabric softener The temperature depends on the fabric care instructions, but should not exceed 40ºC Start the washing machine and after about 15 sec Add the entire contents of this bottle to the running water via the soap dish If these 15 seconds are not waited and the product is added too early, it may end up directly in the washing machine drain because a washing machine first drains water the first few seconds of a new programme Do not use the product in a washing ball Finish the wash programme completely The effect of this product is enhanced by heat, therefore preferably iron the textile before it is completely dry or dry it in a tumble dryer. Consult the washing instructions of the textile whether this is permitted, otherwise dry on a clothes line ds: dsc: kts: waterproof textile 300 ml kpn: 177030103 kpn_dash: kpn_clear: 177030103 bkpn: HG 177030103 bkpn_clear: HG 177030103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 177030103 sr_ns: HG177030103
r: 02263474 p: 15.77 pid: 155924 b: TEROSON q: 0 st: lt: 8 ean: 4002872156799 sr: TEROSON 787643 sr_no_br: 787643 sr_no_br_cl: 787643 sr_cl: TEROSON787643 sr_dash: sold: 1088.13 p_range: none act: 1 avo: av: Net volume 500 ml Relative density 1,178 ADR packing group ADR class 2.1 UN number UN1950 Principal hazard property GHS02 Flammable Conseils de prudence (P) P210; P211; P251; P260; P273; P280; P410 + P412 H-statements H222; H229; H315; H319; H335; H373; H412 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard Physical state Aerosol Flash point 16 °C Packaging Spray can n: TEROSON SB 3140 stone chip protection black (500ml aerosol) - 787643 cn: COATING cn2: COATING cn_clear: COATING d: Product description: TEROSON SB 3140 is an anti-chip spray based on synthetic resin. It is an excellent overpaintable product used for abrasion-resistant coating, for spot repairs such as the treatment of small isolated areas and the touching-up of local spots after accident repairs. Excellent for spraying fine textures. It has an approximate cure time of 2 hours. Recommended surface treatment with TEROSON VR 10. ds: dsc: kts: stone chip protection black (500ml aerosol) kpn: SB 3140 kpn_dash: kpn_clear: SB3140 bkpn: TEROSON SB 3140 bkpn_clear: TEROSON SB3140 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Teroson / Teroson technical and chemical products / Teroson surface treatment and repair / Teroson other surface treatment / Teroson coating sr_no_br_cl_ns: 787643 sr_ns: TEROSON787643
r: 02013208 p: 24.44 pid: 155100 b: TEROSON q: 0 st: lt: 8 ean: 4002872182781 sr: TEROSON 2671621 sr_no_br: 2671621 sr_no_br_cl: 2671621 sr_cl: TEROSON2671621 sr_dash: sold: 293.28 p_range: none act: 1 avo: av: Net volume 1 l Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS09 Environmental hazard H-statements H225; H315; H317; H319; H336; H411 Conseils de prudence (P) P210; P261; P273; P280; P370 + P378; P403 + P235 n: TEROSON TEROTEX Super 3000 stone chip protection spray black (1l bottle) - 2671621 cn: COATING cn2: COATING cn_clear: COATING d: Product description: TEROSON SB S3000 is a synthetic resin-based anti-chip coating product used for stone chip and spot repair tasks. It is ideal for reproducing all different kinds of OEM textures on vehicles. The product is overpaintable and characterised by a good abrasion resistance. Easy application with filler or paint pistols, the TEROSON UBC AIR PRESSURE GUN or the TEROSON UBC AIR PRESSURE CUP GUN. Recommended surface treatment with TEROSON VR 20. ds: dsc: kts: stone chip protection spray black (1l bottle) kpn: TEROTEX Super 3000 kpn_dash: kpn_clear: TEROTEXSuper3000 bkpn: TEROSON TEROTEX Super 3000 bkpn_clear: TEROSON TEROTEXSuper3000 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Teroson / Teroson technical and chemical products / Teroson surface treatment and repair / Teroson other surface treatment / Teroson coating sr_no_br_cl_ns: 2671621 sr_ns: TEROSON2671621
r: 11010361 p: 213.75 pid: 50053 b: LOCTITE q: 0 st: lt: 10 ean: 5010266321509 sr: LOCTITE 2034324 sr_no_br: 2034324 sr_no_br_cl: 2034324 sr_cl: LOCTITE2034324 sr_dash: sold: 213.75 p_range: none act: 1 avo: av: ADR packing group ADR class UN number Weight 1 kg Principal hazard property GHS07 Harmful or irritant Conseils de prudence (P) P261; P273; P280; P305 + P351 + P338; P337 + P313; P501 H-statements H315; H319; H335; H412 Hazard class GHS07 Harmful or irritant Physical state Liquid Flash point 80-93 °C n: LOCTITE PC 7226 epoxy coating grey in bucket (1 kg) - 2034324 cn: COATING cn2: COATING cn_clear: COATING d: Product description: LOCTITE PC 7226 is a 2-part, grey, carbide-filled, trowelable, non-sagging, epoxy-based surface coating for protecting processing equipment from fine particle abrasion (with or without chemical attack). It is suitable for overhead and vertical surfaces. Typical applications include dredge pump liners, flumes and troughs, pump impellers, vibrating feeders, and chutes/hoppers ds: dsc: kts: epoxy coating grey in bucket (1 kg) kpn: PC 7226 kpn_dash: kpn_clear: PC7226 bkpn: LOCTITE PC 7226 bkpn_clear: LOCTITE PC7226 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Loctite / Loctite technical and chemical products / Loctite surface treatment and repair / Loctite other surface treatment / Loctite coating sr_no_br_cl_ns: 2034324 sr_ns: LOCTITE2034324
r: 11990520 p: 21.48 pid: 155727 b: TEROSON q: 0 st: lt: 8 ean: 4002872171594 sr: TEROSON 2671610 sr_no_br: 2671610 sr_no_br_cl: 2671610 sr_cl: TEROSON2671610 sr_dash: sold: 21.48 p_range: none act: 1 avo: av: Net volume 1 l Relative density 1,24 ADR packing group II ADR class 3 UN number UN1139 Principal hazard property GHS02 Flammable Conseils de prudence (P) P210; P260; P273; P280; P370 + P378; P403 + P235 H-statements H225; H315; H317; H319; H336; H373; H411 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard; GHS09 Environmental hazard Physical state Liquid Flash point 11 °C Packaging Can n: TEROSON TEROTEX Record 2000 HS underbody coating black (1l bottle) - 2671610 cn: COATING cn2: COATING cn_clear: COATING d: Product description: TEROSON RB R2000 HS is a rubber- and resin-based overpaintable coating product for preserving and complementing existing underbody coatings and spot repairs. It enhances abrasion resistance on visible underbody car parts. The product is ideal for reproducing OEM textures and is compatible with all OEM coatings. Easy application with the TEROSON ET UBC GUN or the TEROSON ET UBC MULTI SPRAY GUN. Surface treatment with TEROSON VR 10 recommended. ds: dsc: kts: underbody coating black (1l bottle) kpn: TEROTEX Record 2000 HS kpn_dash: kpn_clear: TEROTEXRecord2000HS bkpn: TEROSON TEROTEX Record 2000 HS bkpn_clear: TEROSON TEROTEXRecord2000HS c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Teroson / Teroson technical and chemical products / Teroson surface treatment and repair / Teroson other surface treatment / Teroson coating sr_no_br_cl_ns: 2671610 sr_ns: TEROSON2671610
