Choose your filter
Filter
Categories
Brand
Stocked items only
Price excl. VAT
to €
Min. temperature
Width
Max. temperature
Thickness
Colour (manufacturer)
Material
Packaging
Height
Form
Legend
Number per pack
Number of holes
Legend on the back
Diameter (hole)

Buy a Gift Card

Gift Card

Brady warning tags and work order tags for lockout

Brady lockout tags tell everyone on the floor that a machine, switch or line is out of service and must not be switched on. They hang at the isolation point, together with the padlock and lockout device that physically block the control, and are part of the Brady lockout range.

Two types set the choice. Warning tags stay on the lockout during the work, with wording such as Work in progress by, Machine locked for the safety of maintenance personnel or Label and lock only removable by, plus space for the name of whoever locked it out. Work order labels show the status of a machine or part after the work: Approved, Rejected, Tested, Inspected, Repair, Maintenance or Do not use.

The format follows where the tag hangs. A 160 x 75 mm tag reads well on a switch cabinet, a narrow 110 x 50 mm one suits a small lockout device, and 75 x 150 mm work order labels leave room for a short note. There are also safety labels of 145 x 85 mm. The tags come in packs of ten, so a spare is always at hand at the lockout station.

⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.