- Drive type: Slotted
- ESD protection: No
- Non-sparking: No
Bosch fixed-blade screwdrivers in PH, PZ, SL and TX, including insulated VDE
Bosch fixed-blade screwdrivers drive and remove screws by hand, in slotted, Phillips, Pozidriv and Torx, with an insulated VDE version for work on electrical installations.
Start with the screw profile. Slotted (SL) comes in 4.5 and 5.5 mm, Pozidriv (PZ) from PZ1 to PZ3, Phillips (PH) in PH1, and Torx (TX) in TX20 and TX25. The combination profiles SL/PZ and SL/PH fit both a slot and a cross recess, which helps with switchgear that uses combination screw heads. A tip that fits badly damages the screw head, so take the right size.
VDE screwdrivers are insulated for live work, which makes them the electrician's choice. The blade length, 75, 100 or 125 mm, decides how deep you reach into a cabinet or flush box. There is also a screwdriver for tightening the screws on jigsaws. These fixed-blade models are part of Bosch screwdrivers, where you will also find bit screwdrivers for working with interchangeable bits in one handle.
- Drive size: PH1
- Blade length: 100 mm
- Thickness (blade): Not applicable
- Drive size: PZ/S 2
- Blade length: 125 mm
- Non-sparking: No
- Drive size: PZ3
- Blade length: 125 mm
- Non-sparking: No
- Drive size: PZ1
- Blade length: 100 mm
- Non-sparking: No
- Drive size: Slotted 4,5 mm
- Blade length: 100 mm
- ESD protection: No
- Drive size: T25
- Blade length: 100 mm
- Non-sparking: No
- Drive size: T20
- Blade length: 100 mm
- Thickness (blade): Not applicable
- Drive size: T25
- Blade length: 100 mm
- Non-sparking: No
- Drive size: Slotted 5,5 mm
- Blade length: 100 mm
- Thickness (blade): 1 mm
- Drive size: PH/S 1
- Blade length: 100 mm
- Non-sparking: No
- Drive size: PH1
- Blade length: 100 mm
- Non-sparking: No
- Drive size: T25
- Blade length: 100 mm
- Thickness (blade): Not applicable
- Drive size: Slotted 5,5 mm
- Blade length: 100 mm
- ESD protection: No
- Drive size: PZ/S 1
- Blade length: 100 mm
- Non-sparking: No
- Drive size: Slotted 4,5 mm
- Blade length: 100 mm
- Thickness (blade): 1 mm
- Drive size: T40
- Blade length: 125 mm
- Thickness (blade): Not applicable
- Drive size: T15
- Blade length: 75 mm
- Thickness (blade): Not applicable
- Drive size: T10
- Blade length: 75 mm
- Thickness (blade): Not applicable
- Drive size: T10
- Blade length: 75 mm
- Non-sparking: No