r: 02276963 p: 8.83 pid: 128000 b: BOSCH q: 0 st: lt: 8 ean: 3165140691239 sr: BOSCH 2608588154 sr_no_br: 2608588154 sr_no_br_cl: 2608588154 sr_cl: BOSCH2608588154 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Diameter 9 mm Cutting length 50 mm Drill bit type Concrete drill bit Overall length 100 mm Shank size 9 mm Shank type Cylindrical Material (drill bit) Carbide tip n: BOSCH 2608588154 concrete drill CYL-5, 9 x 50 x 100 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Concrete drill bit CYL-5, 9 x 50 x 100 mm Long service life for concrete and stone CYL-5 drill bit lasts a long time when drilling fixing holes in concrete and stone Bosch carbide mixture and diamond-ground cutting edges for a wear-resistant drill bit Advantages Extra long life - Drill bit CYL-5 lasts extra long when drilling in concrete and stone. The drill bit is extremely wear-resistant thanks to a combination of diamond-ground cutting edges and a carbide mixture developed by Bosch itself. Friction on the spiral through drilled material is significantly reduced thanks to a vario design with 2 spirals with a short, variable slope for good drill dust removal and less wear. The Bosch Power Grip Shank System ensures that power is fully transferred from machine to drill bit. This allows the full power of the machine to be used for drilling and the drill bit wears less quickly. For drilling fixing holes in concrete, natural and artificial stone. This drill fits cylinder shank systems for all corded or cordless drills. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that this drill bit is within close tolerances, drills very accurately and does not slip while drilling fixing holes. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: concrete drill CYL-5, 9 x 50 x 100 mm kpn: 2608588154 kpn_dash: kpn_clear: 2608588154 bkpn: BOSCH 2608588154 bkpn_clear: BOSCH 2608588154 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608588154 sr_ns: BOSCH2608588154
r: 02894779 p: 8.67 pid: 132323 b: BOSCH q: 0 st: lt: 8 ean: 3165140908108 sr: BOSCH 2608577301 sr_no_br: 2608577301 sr_no_br_cl: 2608577301 sr_cl: BOSCH2608577301 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Diameter 11,5 mm Cutting length 94 mm Drill bit type Metal drill bit Overall length 142 mm Shank size 11,5 Shank type Cylindrical - tapered Material (drill bit) HSS Standard DIN 338 n: BOSCH 2608577301 HSS twist drill PointTeQ with reduced shank 11.5 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Spiral drill bit HSS PointTeQ 11.5 mm reduced take-up shank Fast drilling in metal The HSS spiral drill PointTeQ offers fast drilling in metal thanks to the PointTeQ tip The self-centring tip prevents drift, enabling quick and easy drilling starts Advantages Fast drilling in metal - The HSS spiral drill PointTeQ offers fast drilling in metal thanks to the PointTeQ tip. Fast and easy drill start thanks to the self-centring tip that prevents drift. Higher drilling speed reduces the risk of heating and wear. The PointTeQ tip stays sharp. This guarantees excellent durability. The drill bit is suitable for drilling through-holes and centring holes in alloyed and unalloyed steel, non-ferrous metals, cast iron and plastic. Has a cylindrical shank and is intended for use in drill stands and drill/screw machines. The risk of breaking is low, especially for drill bits with a diameter of less than 6 mm, as the drill bit is built very elastically. The black oxide-coated spiral allows fast chip removal. The HSS PointTeQ spiral drill bit is manufactured in accordance with DIN 338. The drill bit is of type N (spiral angle) with tip of 135 degrees. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: HSS twist drill PointTeQ with reduced shank 11.5 mm kpn: 2608577301 kpn_dash: kpn_clear: 2608577301 bkpn: BOSCH 2608577301 bkpn_clear: BOSCH 2608577301 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577301 sr_ns: BOSCH2608577301
r: 02783845 p: 8.66 pid: 129810 b: BOSCH q: 0 st: lt: 8 ean: 3165140691499 sr: BOSCH 2608667445 sr_no_br: 2608667445 sr_no_br_cl: 2608667445 sr_cl: BOSCH2608667445 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: For material Plastic Quantity per blister 3 n: BOSCH 2608667445 jigsaw blade T 102 H Clean for PVC (3 pack) cn: JIGSAW BLADE cn2: JIGSAW BLADE cn_clear: JIGSAWBLADE d: Product description Jigsaw blade T102 H Clean for PVC 3x Smooth cuts in non-abrasive thermoplastics T 102 H Clean for PVC jigsaw blade offers smooth, straight cuts in plastics Precision-ground teeth with tapered body ensure smooth results Advantages Smooth cuts - The T 102 H Clean for PVC jigsaw blade offers smooth, straight cuts in plastic. The precision ground teeth and tapered body cut smoothly, while the tooth geometry is designed to prevent melting and continuous chip formation during PVC cutting. The high carbon steel (HCS) blade is suitable for cutting non-abrasive thermoplastics. The fine tooth spacing (2.3 mm) cuts through plastic sheets with a thickness of 3 - 30 mm and the standard length (100 mm) cuts through plastic pipes, profiles and solid parts up to 30 mm in diameter. For use with jigsaws with a T-shank click system. Fits all jigsaws with a T-shank. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, folding carton, with Euro die-cutting kts: jigsaw blade T 102 H Clean for PVC (3 pack) kpn: 2608667445 kpn_dash: kpn_clear: 2608667445 bkpn: BOSCH 2608667445 bkpn_clear: BOSCH 2608667445 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Jigsaw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch jigsaw blade sr_no_br_cl_ns: 2608667445 sr_ns: BOSCH2608667445
r: 02896889 p: 8.66 pid: 135208 b: BOSCH q: 0 st: lt: 8 ean: 3165140773324 sr: BOSCH 2608662311 sr_no_br: 2608662311 sr_no_br_cl: 2608662311 sr_cl: BOSCH2608662311 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Length (saw blade) 60 mm Saw blade type Plunge-cut blade n: BOSCH PAIZ 32 EPC HCS Starlock Plus saw blade for wood, Curved-Tec 32 x 60 mm - 2608662311 cn: SAW BLADE FOR OSCILLATING MULTI-TOOL cn2: SAW BLADE FOR OSCILLATING MULTI-TOOL cn_clear: SAWBLADEFOROSCILLATINGMULTITOOL d: Product description Starlock Plus PAIZ 32 EPC HCS, Wood, Curved-Tec 32 x 60 Bulk Deep cuts in wood The Starlock PAIZ 32 EPC saw blade makes deep cuts in wood With a cutting length of 60 mm for extra depth Advantages Deep cuts in wood - The Starlock PAIZ 32 EPC saw blade makes deep cuts in wood. The length of 60 mm allows this saw blade to cut deeper. The sturdy insert system reduces swabbing and enables larger, controlled cuts due to direct power transfer. These special features make this product ideal for deep plunge cuts in soft wood, cutting recesses in furniture parts, cutting wooden parts flush to length and cutting through solid soft wood. All Starlock Plus and Starlock Max power tools are compatible with this product. The rounded cutting edge (Curved-Tec) makes precise and smooth plunge cuts easy. The Starlock Plus system enables very fast, deep and versatile plunge-cutting. The Starlock Snap-In system allows saw blades to be removed and changed within 3 seconds without having to touch the saw blade. The special insert system offers the highest power transfer thanks to a 3-dimensional close connection between the machine and the accessory. StarlockPlus connection for maximum power transfer and convenient saw blade changes within 3 seconds. ds: dsc: kts: Starlock Plus saw blade for wood, Curved-Tec 32 x 60 mm kpn: PAIZ 32 EPC HCS kpn_dash: kpn_clear: PAIZ32EPCHCS bkpn: BOSCH PAIZ 32 EPC HCS bkpn_clear: BOSCH PAIZ32EPCHCS c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Saw blade for oscillating multi-tool | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch saw blade for oscillating multi-tool sr_no_br_cl_ns: 2608662311 sr_ns: BOSCH2608662311
r: 08052007 p: 8.65 pid: 131690 b: BOSCH q: 0 st: lt: 8 ean: 4059952538730 sr: BOSCH 2608900580 sr_no_br: 2608900580 sr_no_br_cl: 2608900580 sr_cl: BOSCH2608900580 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: av: Diameter 7 mm Drill bit type Multi-purpose drill bit Overall length 150 mm Shank size 1/4 inch Shank type Hex Material (drill bit) Carbide tip Cutting length 90 mm Product Range Bosch Expert n: BOSCH 2608900580 Expert universal drill HEX-9 MultiConstruction 7x90x150mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description EXPERT Universal drill bit HEX-9 MultiConstruction 7x90x150 Up to 5x more accurate than Bosch's CYL-3 drill bit Accurate drilling is easy with the patented Bosch Centering Geometry. Hexagonal shank for maximum power transfer in standard three-claw drill chucks and drill/screwdriver holders. Advantages Up to 5x more accurate than Bosch's CYL-3 drill bit - On a modern construction site, you work with many different materials and you never know what's next to drill. Finding the right drill bit can be difficult and time-consuming, unless you have the EXPERT MultiConstruction drill bit on hand. This extremely versatile drill bit can accurately drill into hard materials like granite without slipping thanks to its sharp tip and advanced geometric design. Made of optimised carbide by our fine grinding manufacturing techniques. The drill can also handle concrete, brick, soft tiles, wood and metal. Always a professional result, regardless of the material. The Bosch EXPERT HEX-9 MultiConstruction drill bit is the only drill bit that should always be in your toolbox: you will never lose time looking for the right drill bit again. Hex shank for maximum power transfer in standard three-claw drill chucks and drill/screwdriver holders. Maximum precision when drilling in various materialsThis extremely versatile drill bit can accurately drill into hard materials such as tiles and granite without slipping thanks to its sharp tip and advanced geometric design. Made of optimised carbide by our fine grinding manufacturing techniques. The drill can also handle concrete, brick, wood and metal. Always a professional result, whatever the material. Hex shank for maximum power transfer in standard three-claw and 6-sided drill chuck ds: dsc: kts: Expert universal drill HEX-9 MultiConstruction 7x90x150mm kpn: 2608900580 kpn_dash: kpn_clear: 2608900580 bkpn: BOSCH 2608900580 bkpn_clear: BOSCH 2608900580 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900580 sr_ns: BOSCH2608900580
r: 08052039 p: 8.65 pid: 130322 b: BOSCH q: 0 st: lt: 8 ean: 4059952539126 sr: BOSCH 2608900619 sr_no_br: 2608900619 sr_no_br_cl: 2608900619 sr_cl: BOSCH2608900619 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: av: Diameter 7 mm Drill bit type Multi-purpose drill bit Overall length 150 mm Shank size 7 mm Shank type Cylindrical Material (drill bit) Carbide tip Cutting length 90 mm Product Range Bosch Expert n: BOSCH 2608900619 Expert universal drill CYL-9 MultiConstruction 7x90x150mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description EXPERT Universal drill bit CYL-9 MultiConstruction 7x90x150 Up to 5x more accurate than the CYL-3 drill bit from Bosch Accurate drilling is easy with the patented Bosch Centering Geometry. Cylindrical shank compatible with three-claw drill chucks. Advantages Up to 5x more accurate than Bosch's CYL-3 drill bit - On a modern construction site, you work with many different materials and you never know what's next to drill. Finding the right drill bit can be difficult and time-consuming, unless you have the EXPERT MultiConstruction drill bit on hand. This extremely versatile drill bit can accurately drill into hard materials like granite without slipping thanks to its sharp tip and advanced geometric design. Made of optimised carbide by our fine grinding manufacturing techniques. The drill can also handle concrete, brick, soft tiles, wood and metal. Always a professional result, regardless of the material. The Bosch EXPERT CYL-9 MultiConstruction cylindrical drill bit is the only drill bit that should always be in your toolbox: you will never lose time searching for the right drill bit again. Cylindrical shank compatible with three-claw drill chucks. Maximum precision when drilling in various materialsThis extremely versatile drill bit can accurately drill into hard materials such as tiles and granite without slipping thanks to its sharp tip and advanced geometric design. Made of optimised carbide by our fine grinding manufacturing techniques. The drill can also handle concrete, brick, wood and metal. Always a professional result regardless of the material. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: Expert universal drill CYL-9 MultiConstruction 7x90x150mm kpn: 2608900619 kpn_dash: kpn_clear: 2608900619 bkpn: BOSCH 2608900619 bkpn_clear: BOSCH 2608900619 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900619 sr_ns: BOSCH2608900619
r: 08102737 p: 8.45 pid: 160624 b: BOSCH q: 0 st: lt: 8 ean: 6949509245380 sr: BOSCH 2608902347 sr_no_br: 2608902347 sr_no_br_cl: 2608902347 sr_cl: BOSCH2608902347 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: av: Diameter 4 mm Drill bit type Multi-purpose drill bit Overall length 150 mm Shank size 1/4 inch Shank type Hex Material (drill bit) Carbide tip Cutting length 90 mm Product Range Bosch Expert n: BOSCH 2608902347 EXPERT universal drill HEX-9 MultiConstruction 4 x 90 x 150 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Up to 5x more accurate than a CYL-3 drill bit from Bosch High precision when drilling in various materials Accurate drilling is easier with Bosch Centering Geometry Drill precise holes with the specially designed centring tip Hex shank for a strong connection and maximum torque transfer in chucks with three chucks and 1/4" inner hex toolholders ds: dsc: kts: EXPERT universal drill HEX-9 MultiConstruction 4 x 90 x 150 mm kpn: 2608902347 kpn_dash: kpn_clear: 2608902347 bkpn: BOSCH 2608902347 bkpn_clear: BOSCH 2608902347 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608902347 sr_ns: BOSCH2608902347
r: 08052029 p: 8.45 pid: 130292 b: BOSCH q: 0 st: lt: 8 ean: 4059952538983 sr: BOSCH 2608900605 sr_no_br: 2608900605 sr_no_br_cl: 2608900605 sr_cl: BOSCH2608900605 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: av: Diameter 4 mm Drill bit type Multi-purpose drill bit Overall length 130 mm Shank size 4 mm Shank type Cylindrical Material (drill bit) Carbide tip Cutting length 80 mm Product Range Bosch Expert n: BOSCH 2608900605 Expert universal drill CYL-9 MultiConstruction 4x80x130mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description EXPERT Universal drill bit CYL-9 MultiConstruction 4x80x130 Up to 5x more accurate than the CYL-3 drill bit from Bosch Accurate drilling is easy with the patented Bosch Centering Geometry. Cylindrical shank compatible with three-claw drill chucks. Advantages Up to 5x more accurate than Bosch's CYL-3 drill bit - On a modern construction site, you work with many different materials and you never know what's next to drill. Finding the right drill bit can be difficult and time-consuming, unless you have the EXPERT MultiConstruction drill bit on hand. This extremely versatile drill bit can accurately drill into hard materials like granite without slipping thanks to its sharp tip and advanced geometric design. Made of optimised carbide by our fine grinding manufacturing techniques. The drill can also handle concrete, brick, soft tiles, wood and metal. Always a professional result, regardless of the material. The Bosch EXPERT CYL-9 MultiConstruction cylindrical drill bit is the only drill bit that should always be in your toolbox: you will never lose time searching for the right drill bit again. Cylindrical shank compatible with three-claw drill chucks. Maximum precision when drilling in various materialsThis extremely versatile drill bit can accurately drill into hard materials such as tiles and granite without slipping thanks to its sharp tip and advanced geometric design. Made of optimised carbide by our fine grinding manufacturing techniques. The drill can also handle concrete, brick, wood and metal. Always a professional result regardless of the material. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: Expert universal drill CYL-9 MultiConstruction 4x80x130mm kpn: 2608900605 kpn_dash: kpn_clear: 2608900605 bkpn: BOSCH 2608900605 bkpn_clear: BOSCH 2608900605 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900605 sr_ns: BOSCH2608900605
r: 02221926 p: 8.35 pid: 134527 b: BOSCH q: 0 st: lt: 8 ean: 3165140418058 sr: BOSCH 2608595686 sr_no_br: 2608595686 sr_no_br_cl: 2608595686 sr_cl: BOSCH2608595686 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Diameter 6,5 mm Cutting length 97 mm Drill bit type Metal drill bit Overall length 139 mm Shank size 6,5 mm Shank type Cylindrical Material (drill bit) HSS-G Standard DIN 340 n: BOSCH 2608595686 metal drill bit HSS-G, DIN 340, 6.5 x 97 x 148 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-G, DIN 340, 6.5 x 97 x 148 mm Drilling deep holes with maximum precision Long HSS spiral drill ground ensures maximum precision when drilling deep holes in metal Thanks to the extra length, this drill bit can drill deeper holes Advantages Deep holes with maximum precision - The long HSS spiral drill bit ground ensures maximum precision when drilling deep holes in metal. Thanks to its extra length, this drill bit can drill deeper holes. The self-centring, 135-degree split tip combines active cutting action with perfect centring without running, delivering maximum precision. The split tip makes pre-punching or pre-drilling up to 10 mm unnecessary. This precision ground HSS (High-Speed Steel) drill bit offers up to 40% higher drilling speed and up to 50% lower feed pressure than standard ground HSS drills with chisel edges. This drill bit is designed for drilling deep holes in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, temper cast iron, non-ferrous metals and hard plastics. The drill bit has a cylindrical shank (drill bit and shank have the same diameter) and is intended for use in drill stands and drill/screw machines The long HSS spiral drill bit ground is produced in accordance with DIN 340. The drill bit is type N (groove angle) with a tip of 135 degrees and a diameter tolerance of h8. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-G, DIN 340, 6.5 x 97 x 148 mm kpn: 2608595686 kpn_dash: kpn_clear: 2608595686 bkpn: BOSCH 2608595686 bkpn_clear: BOSCH 2608595686 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608595686 sr_ns: BOSCH2608595686
r: 02222550 p: 8.34 pid: 132060 b: BOSCH q: 0 st: lt: 8 ean: 3165140189071 sr: BOSCH 2608597775 sr_no_br: 2608597775 sr_no_br_cl: 2608597775 sr_cl: BOSCH2608597775 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Diameter 5,5 mm Cutting length 150 mm Drill bit type Hammer drill bit Overall length 215 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 2608597775 hammer drill SDS-Plus-5, 5.5 x 150 x 215 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 5.5 x 150 x 215 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Toothed carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill bit features spirals and notches that make it easier for the drill bit to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 5.5 x 150 x 215 mm kpn: 2608597775 kpn_dash: kpn_clear: 2608597775 bkpn: BOSCH 2608597775 bkpn_clear: BOSCH 2608597775 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608597775 sr_ns: BOSCH2608597775
r: 01049056 p: 8.31 pid: 131500 b: BOSCH q: 0 st: lt: 8 ean: 3165140060790 sr: BOSCH 2608596676 sr_no_br: 2608596676 sr_no_br_cl: 2608596676 sr_cl: BOSCH2608596676 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Diameter 2,5 mm Material (drill bit) HSS Cutting length 30 mm Surface treatment (drill bit) TiN Standard DIN 338 Shank type Cylindrical Shank size 2,5 mm Overall length 57 mm Drill bit type Metal drill bit n: BOSCH 2608596676 metal drill bit HSS-TiN, DIN 338, 2.5 x 30 x 57 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-TiN, DIN 338, 2.5 x 30 x 57 mm Maximum service life HSS spiral drill bit TiN-coated offers longer service life Titanium nitride coating ensures very low friction and minimal wear Advantages Maximum service life - The HSS spiral drill bit TiN-coated offers maximum service life when drilling in metal. When using the right cooling system, the drill bit has very low friction and minimal wear thanks to the TiN-coating. Thanks to the high surface quality of this ground spiral drill made of HSS (High-Speed Steel), the drill bit can be used for long periods of time. Suitable for alloyed and unalloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics, such as Plexiglas. This drill has a cylindrical shank (drill and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS spiral drill bit TiN-coated is produced in accordance with DIN 338. The drill bit is type N (spiral angle) with a tip of 135 degrees and a diameter tolerance of h8. The pointed split point ensures an active cutting action and perfect centring without expiring. Do not use in aluminium and only with a coolant. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-TiN, DIN 338, 2.5 x 30 x 57 mm kpn: 2608596676 kpn_dash: kpn_clear: 2608596676 bkpn: BOSCH 2608596676 bkpn_clear: BOSCH 2608596676 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608596676 sr_ns: BOSCH2608596676
r: 01049059 p: 8.31 pid: 131503 b: BOSCH q: 0 st: lt: 6 ean: 3165140060806 sr: BOSCH 2608596681 sr_no_br: 2608596681 sr_no_br_cl: 2608596681 sr_cl: BOSCH2608596681 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Diameter 3 mm Drill bit type Metal drill bit Overall length 61 mm Shank size 3 mm Shank type Cylindrical Material (drill bit) HSS Surface treatment (drill bit) TiN Standard DIN 338 Cutting length 33 mm n: BOSCH 2608596681 metal drill bit HSS-TiN, DIN 338, 3 x 33 x 61 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-TiN, DIN 338, 3 x 33 x 61 mm Maximum service life HSS spiral drill bit TiN-coated offers longer service life Titanium nitride coating ensures very low friction and minimal wear Advantages Maximum service life - The HSS spiral drill bit TiN-coated offers maximum service life when drilling in metal. When using the right cooling system, the drill bit has very low friction and minimal wear thanks to the TiN-coating. Thanks to the high surface quality of this ground spiral drill made of HSS (High-Speed Steel), the drill bit can be used for long periods of time. Suitable for alloyed and unalloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics, such as Plexiglas. This drill has a cylindrical shank (drill and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS spiral drill bit TiN-coated is produced in accordance with DIN 338. The drill bit is type N (spiral angle) with a tip of 135 degrees and a diameter tolerance of h8. The pointed split point ensures an active cutting action and perfect centring without expiring. Do not use in aluminium and only with a coolant. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-TiN, DIN 338, 3 x 33 x 61 mm kpn: 2608596681 kpn_dash: kpn_clear: 2608596681 bkpn: BOSCH 2608596681 bkpn_clear: BOSCH 2608596681 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608596681 sr_ns: BOSCH2608596681
r: 02222103 p: 8.31 pid: 134590 b: BOSCH q: 0 st: lt: 8 ean: 3165140060813 sr: BOSCH 2608596683 sr_no_br: 2608596683 sr_no_br_cl: 2608596683 sr_cl: BOSCH2608596683 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Diameter 3,2 mm Drill bit type Metal drill bit Overall length 65 mm Shank size 3,2 mm Shank type Cylindrical Material (drill bit) HSS Surface treatment (drill bit) TiN Standard DIN 338 Cutting length 36 mm n: BOSCH 2608596683 metal drill bit HSS-TiN, DIN 338, 3.2 x 36 x 65 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-TiN, DIN 338, 3.2 x 36 x 65 mm Maximum service life HSS spiral drill bit TiN-coated offers longer service life Titanium nitride coating ensures very low friction and minimal wear Advantages Maximum service life - The HSS spiral drill bit TiN-coated offers maximum service life when drilling in metal. When using the right cooling system, the drill bit has very low friction and minimal wear thanks to the TiN-coating. Thanks to the high surface quality of this ground spiral drill made of HSS (High-Speed Steel), the drill bit can be used for long periods of time. Suitable for alloyed and unalloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics, such as Plexiglas. This drill has a cylindrical shank (drill and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS spiral drill bit TiN-coated is produced in accordance with DIN 338. The drill bit is type N (spiral angle) with a tip of 135 degrees and a diameter tolerance of h8. The pointed split point ensures an active cutting action and perfect centring without expiring. Do not use in aluminium and only with a coolant. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-TiN, DIN 338, 3.2 x 36 x 65 mm kpn: 2608596683 kpn_dash: kpn_clear: 2608596683 bkpn: BOSCH 2608596683 bkpn_clear: BOSCH 2608596683 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608596683 sr_ns: BOSCH2608596683
r: 03059907 p: 8.23 pid: 132707 b: BOSCH q: 0 st: lt: 8 ean: 6949509231512 sr: BOSCH 2608577536 sr_no_br: 2608577536 sr_no_br_cl: 2608577536 sr_cl: BOSCH2608577536 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Diameter 9,5 mm Cutting length 81 mm Drill bit type Metal drill bit Overall length 125 mm Shank size 1/4 inch Shank type Hex Material (drill bit) HSS Standard DIN 338 n: BOSCH 2608577536 metal drill bit HSS PointTeQ 9.5mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS PointTeQ 9.5mm Fast drilling in metal The HSS PointTeQ twist drill bit with hex shank is ideal for fast drilling in metal When drilling at high speeds, there is less heat build-up and wear on the drill bit. The PointTeQ tip ensures lasting sharpness and durability Advantages Fast drilling in metal - The HSS PointTeQ spiral drill bit with hex shank drills quickly in metal. This drill bit is designed for high-speed drilling, which minimises heating and wear on the drill bit. The PointTeQ design of the tip ensures lasting sharpness and high durability. The self-centring tip prevents drift and enables quick and easy drill start. The spiral with a black oxide coating ensures fast chip removal. The drill's hexagonal shank ensures stability and firm locking of the drill bit in the chuck, making it extra reliable. The shank strengthens the body of the drill bit and reduces the risk of breakage when drilling with a diameter smaller than 6 mm. The drill bit is compatible with 1/4-inch hex shank systems for universal use with impact screwdrivers, drill/drivers and drill stands. The four-surface tip of the HSS PointTeQ spiral drill bit enables active drilling and perfect centring. Type N (spiral angle) drill bit with 135° tip in accordance with DIN 338. Hexagonal shank for maximum power transfer in standard three-claw drill chucks and drill/screw machine holders. ds: dsc: kts: metal drill bit HSS PointTeQ 9.5mm kpn: 2608577536 kpn_dash: kpn_clear: 2608577536 bkpn: BOSCH 2608577536 bkpn_clear: BOSCH 2608577536 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577536 sr_ns: BOSCH2608577536
r: 01049225 p: 8.18 pid: 131552 b: BOSCH q: 0 st: lt: 8 ean: 3165140098588 sr: BOSCH 2608597130 sr_no_br: 2608597130 sr_no_br_cl: 2608597130 sr_cl: BOSCH2608597130 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Diameter 7 mm Cutting length 150 mm Drill bit type Hammer drill bit Overall length 215 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 2608597130 hammer drill SDS-Plus-5, 7 x 150 x 215 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 7 x 150 x 215 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Benefits Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 7 x 150 x 215 mm kpn: 2608597130 kpn_dash: kpn_clear: 2608597130 bkpn: BOSCH 2608597130 bkpn_clear: BOSCH 2608597130 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608597130 sr_ns: BOSCH2608597130
r: 08052037 p: 8.14 pid: 130268 b: BOSCH q: 0 st: lt: 8 ean: 4059952539096 sr: BOSCH 2608900616 sr_no_br: 2608900616 sr_no_br_cl: 2608900616 sr_cl: BOSCH2608900616 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: av: Diameter 6,5 mm Drill bit type Multi-purpose drill bit Overall length 150 mm Shank size 6,5 mm Shank type Cylindrical Material (drill bit) Carbide tip Cutting length 90 mm Product Range Bosch Expert n: BOSCH 2608900616 Expert universal drill CYL-9 MultiConstruction 6.5x90x150mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description EXPERT Universal drill bit CYL-9 MultiConstruction 6.5x90x150 Up to 5x more accurate than Bosch's CYL-3 drill bit Accurate drilling is easy with the patented Bosch Centering Geometry. Cylindrical shank compatible with three-claw drill chucks. Advantages Up to 5x more accurate than Bosch's CYL-3 drill bit - On a modern construction site, you work with many different materials and you never know what's next to drill. Finding the right drill bit can be difficult and time-consuming, unless you have the EXPERT MultiConstruction drill bit on hand. This extremely versatile drill bit can accurately drill into hard materials like granite without slipping thanks to its sharp tip and advanced geometric design. Made of optimised carbide by our fine grinding manufacturing techniques. The drill can also handle concrete, brick, soft tiles, wood and metal. Always a professional result, regardless of the material. The Bosch EXPERT CYL-9 MultiConstruction cylindrical drill bit is the only drill bit that should always be in your toolbox: you will never lose time searching for the right drill bit again. Cylindrical shank compatible with three-claw drill chucks. Maximum precision when drilling in various materialsThis extremely versatile drill bit can accurately drill into hard materials such as tiles and granite without slipping thanks to its sharp tip and advanced geometric design. Made of optimised carbide by our fine grinding manufacturing techniques. The drill can also handle concrete, brick, wood and metal. Always a professional result regardless of the material. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: Expert universal drill CYL-9 MultiConstruction 6.5x90x150mm kpn: 2608900616 kpn_dash: kpn_clear: 2608900616 bkpn: BOSCH 2608900616 bkpn_clear: BOSCH 2608900616 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900616 sr_ns: BOSCH2608900616
r: 08102740 p: 8.14 pid: 160637 b: BOSCH q: 0 st: lt: 8 ean: 6949509245403 sr: BOSCH 2608902349 sr_no_br: 2608902349 sr_no_br_cl: 2608902349 sr_cl: BOSCH2608902349 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: av: Diameter 6,5 mm Drill bit type Multi-purpose drill bit Overall length 150 mm Shank size 1/4 inch Shank type Hex Material (drill bit) Carbide tip Cutting length 90 mm Product Range Bosch Expert n: BOSCH 2608902349 EXPERT universal drill HEX-9 MultiConstruction 6.5 x 90 x 150 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Up to 5x more accurate than a CYL-3 drill bit from Bosch High precision when drilling in various materials Accurate drilling is easier with Bosch Centering Geometry Drill precise holes with the specially designed centring tip Hex shank for a strong connection and maximum torque transfer in chucks with three chucks and 1/4" inner hex toolholders ds: dsc: kts: EXPERT universal drill HEX-9 MultiConstruction 6.5 x 90 x 150 mm kpn: 2608902349 kpn_dash: kpn_clear: 2608902349 bkpn: BOSCH 2608902349 bkpn_clear: BOSCH 2608902349 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608902349 sr_ns: BOSCH2608902349
