r: 01049250 p: 62.04 pid: 131583 b: BOSCH q: 0 st: lt: 8 ean: 3165140028165 sr: BOSCH 1618596240 sr_no_br: 1618596240 sr_no_br_cl: 1618596240 sr_cl: BOSCH1618596240 sr_dash: sold: 62.04 p_range: none type: standard act: 1 avo: av: Diameter 26 mm Cutting length 200 mm Drill bit type Hammer drill bit Overall length 250 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH HAMERBOOR SDS+ 26X250MM 1618596240 2- hammer drill SDS-Plus-5, 26 x 200 x 250 mm - 1618596240 cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 26 x 200 x 250 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 26 x 200 x 250 mm kpn: HAMERBOOR SDS+ 26X250MM 1618596240 2- kpn_dash: HAMERBOOR SDS+ 26X250MM 1618596240 2 kpn_clear: HAMERBOORSDS26X250MM16185962402 bkpn: BOSCH HAMERBOOR SDS+ 26X250MM 1618596240 2- bkpn_clear: BOSCH HAMERBOORSDS26X250MM16185962402 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 1618596240 sr_ns: BOSCH1618596240
r: 02221382 p: 30.89 pid: 131486 b: BOSCH q: 0 st: lt: 8 ean: 3165140376242 sr: BOSCH 2608584803 sr_no_br: 2608584803 sr_no_br_cl: 2608584803 sr_cl: BOSCH2608584803 sr_dash: sold: 61.78 p_range: none type: standard act: 1 avo: av: Diameter (hole saw) 68 mm; 2 11/16 inch Connection type Power Change n: BOSCH GATZAAG HSS-BIM 68MM POWER 2608584803 holesaw special for sheet metal 68 mm - 2608584803 cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description Hole saw Power-Change, Sheet Metal 68 mm Durable in sheet metal Special for Sheet Metal hole saw offers durability when cutting through metal Made of HSS bi-metal with 8% cobalt alloy for extreme resilience and long life Advantages Durable when cutting through sheet metal - The Special for Sheet Metal hole saw offers durability when cutting through metal. This hole saw is made of HSS (high speed steel) bi-metal with an alloy of 8% cobalt. The saw has a long life, higher heat resistance and less risk of tooth breakage under extreme resilience. The tooth configuration (Vario toothing) is ideal for cutting through thin material with reduced wear on the cutting edge. In addition, a depth stop function prevents material from breaking through to protect the working surface. Use this hole saw when cutting through sheet metal less than 5 mm thick, such as mild steel and stainless steel. It is suitable for all corded and cordless drilling/screwing machines. The Special for Sheet Metal holesaw features Bosch's unique power-change adapter with the fastest attachment system on the market. It allows you to lock and unlock the holesaw and centring bits in one click. For use with the tool-free Bosch Power Change Plus adapter: offers accuracy and robustness. ds: dsc: kts: holesaw special for sheet metal 68 mm kpn: GATZAAG HSS-BIM 68MM POWER 2608584803 kpn_dash: GATZAAG HSS kpn_clear: GATZAAGHSSBIM68MMPOWER2608584803 bkpn: BOSCH GATZAAG HSS-BIM 68MM POWER 2608584803 bkpn_clear: BOSCH GATZAAGHSSBIM68MMPOWER2608584803 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch hole saw sr_no_br_cl_ns: 2608584803 sr_ns: BOSCH2608584803
r: 02221633 p: 8.73 pid: 134385 b: BOSCH q: 0 st: lt: 8 ean: 3165140520935 sr: BOSCH 2608585858 sr_no_br: 2608585858 sr_no_br_cl: 2608585858 sr_cl: BOSCH2608585858 sr_dash: sold: 61.11 p_range: none type: standard act: 1 avo: av: Diameter 7 mm Cutting length 69 mm Drill bit type Metal drill bit Overall length 109 mm Shank size 7 mm Shank type Cylindrical Material (drill bit) HSS-E Co 5% Standard DIN 338 n: BOSCH METAALBOOR HSS-CO 7X109MM 2608585858 metal drill bit HSS-Co, DIN 338, 7 x 69 x 109 mm - 2608585858 cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-Co, DIN 338, 7 x 69 x 109 mm Long service life when drilling in stainless steel HSS spiral drill cobalt lasts a long time when drilling in stainless steel. Cobalt alloy and fully ground HSS ensure wear resistance and heat resistance Advantages Long service life - The HSS spiral drill cobalt lasts a long time when drilling in stainless steel. This longer life is due to the steel alloy containing 5% cobalt and the fully ground HSS (High-Speed Steel), which offers excellent surface quality, wear resistance and heat resistance. Thanks to two cutting edges and two grooves, chips are quickly removed, making the drill bit last even longer. This drill is suitable for alloyed and unalloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steel. This drill bit is suitable for alloyed and unalloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steel. The drill has a cylindrical shank (drill bit and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS cobalt spiral drill bit is produced in accordance with DIN 338. The drill bit is type N (groove angle) with a tip of 135 degrees and a diameter tolerance of h8. The pointed split point ensures active cutting action and perfect centring without running. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-Co, DIN 338, 7 x 69 x 109 mm kpn: METAALBOOR HSS-CO 7X109MM 2608585858 kpn_dash: METAALBOOR HSS kpn_clear: METAALBOORHSSCO7X109MM2608585858 bkpn: BOSCH METAALBOOR HSS-CO 7X109MM 2608585858 bkpn_clear: BOSCH METAALBOORHSSCO7X109MM2608585858 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608585858 sr_ns: BOSCH2608585858
r: 02221632 p: 8.73 pid: 133087 b: BOSCH q: 0 st: lt: 8 ean: 3165140520928 sr: BOSCH 2608585857 sr_no_br: 2608585857 sr_no_br_cl: 2608585857 sr_cl: BOSCH2608585857 sr_dash: sold: 61.11 p_range: none type: standard act: 1 avo: av: Diameter 6,8 mm Cutting length 69 mm Drill bit type Metal drill bit Overall length 109 mm Shank size 6,8 mm Shank type Cylindrical Material (drill bit) HSS-E Co 5% Standard DIN 338 n: BOSCH METAALBOOR HSS-CO 6,8X109MM 260858585 metal drill bit HSS-Co, DIN 338, 6.8 x 69 x 109 mm - 2608585857 cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-Co, DIN 338, 6.8 x 69 x 109 mm Long service life when drilling in stainless steel HSS spiral drill cobalt lasts a long time when drilling in stainless steel. Cobalt alloy and fully ground HSS ensure wear resistance and heat resistance Advantages Long service life - The HSS spiral drill cobalt lasts a long time when drilling in stainless steel. This longer life is due to the steel alloy containing 5% cobalt and the fully ground HSS (High-Speed Steel), which offers excellent surface quality, wear resistance and heat resistance. Thanks to two cutting edges and two grooves, chips are quickly removed, making the drill bit last even longer. This drill is suitable for alloyed and unalloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steel. This drill bit is suitable for alloyed and unalloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steel. The drill has a cylindrical shank (drill bit and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS cobalt spiral drill bit is produced in accordance with DIN 338. The drill bit is type N (groove angle) with a tip of 135 degrees and a diameter tolerance of h8. The pointed split point ensures active cutting action and perfect centring without running. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-Co, DIN 338, 6.8 x 69 x 109 mm kpn: METAALBOOR HSS-CO 6,8X109MM 260858585 kpn_dash: METAALBOOR HSS kpn_clear: METAALBOORHSSCO68X109MM260858585 bkpn: BOSCH METAALBOOR HSS-CO 6,8X109MM 260858585 bkpn_clear: BOSCH METAALBOORHSSCO68X109MM260858585 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608585857 sr_ns: BOSCH2608585857
r: 08051881 p: 30.48 pid: 130125 b: BOSCH q: 0 st: lt: 8 ean: 4059952535654 sr: BOSCH 2608900419 sr_no_br: 2608900419 sr_no_br_cl: 2608900419 sr_cl: BOSCH2608900419 sr_dash: sold: 60.96 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: av: Diameter (hole saw) 20 mm Connection type Power Change Product Range Bosch Expert n: BOSCH GATZAAG HM 20MM POWER 2608900419 TOUG holesaw Expert Tough Material 20x60 mm - 2608900419 cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description EXPERT Power-Change holesaw Tough Material 20mm Lasts up to 50x longer in demanding materials than 2608580419 holesaws from Bosch Exceptional durability thanks to Bosch Carbide Technology. For use with the tool-free Bosch Power Change Plus adapter: offers accuracy and robustness. Advantages Lasts up to 50x longer in demanding materials than Bosch's 2608580419 holesaws - Most holesaws for wood and metal seem to work fine, until you hit a hardened nail or screw. Then they scream, smoke and grind until their teeth are lost and you've only made half a hole. With its carbide teeth, the EXPERT Tough Material barely slows down when you hit metal. It cuts cleanly and keeps making holes relentlessly. Each tooth is made with Bosch Carbide Technology and therefore of optimum quality because of the carbide that is laser-welded and ground six times for the perfect shape. This makes the Bosch EXPERT Tough Material hole saw ideal for tough jobs and all-round skilled trades: Besides wood and metal, it is a good hole saw for stainless steel, brick, soft tiles and reinforced plastics. The Bosch EXPERT Tough Material holesaw is a great all-rounder for any professional, and certainly not to be trifled with. For use with the tool-free Bosch Power Change Plus adapter: offers accuracy and robustness. Long life when cutting holes in various materialsEvery tooth is made with Bosch Carbide Technology and therefore of optimum quality because of the carbide that is laser-welded and ground six times for the perfect shape. This makes the Bosch Expert Tough Material hole saw ideal for tough jobs and all-round craftsmanship: Besides wood and metal, it is a good hole saw for stainless steel, brick, soft tiles and reinforced plastics. For use with the tool-free Bosch Power Change Plus adapter: offers accuracy and robustness. ds: dsc: kts: holesaw Expert Tough Material 20x60 mm kpn: GATZAAG HM 20MM POWER 2608900419 TOUG kpn_dash: kpn_clear: GATZAAGHM20MMPOWER2608900419TOUG bkpn: BOSCH GATZAAG HM 20MM POWER 2608900419 TOUG bkpn_clear: BOSCH GATZAAGHM20MMPOWER2608900419TOUG c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch hole saw | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900419 sr_ns: BOSCH2608900419
r: 08051860 p: 30.46 pid: 137033 b: BOSCH q: 0 st: lt: 8 ean: 4059952534886 sr: BOSCH 2608900398 sr_no_br: 2608900398 sr_no_br_cl: 2608900398 sr_cl: BOSCH2608900398 sr_dash: sold: 60.92 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: av: Length 225 mm For material Wood with nails Number of teeth per inch 7 Product Range Bosch Expert n: BOSCH RECIPROZAAGBL.S1167XHM HOUT 260890039 Expert reciprocating saw blade Wood with Metal Demolition - 2608900398 cn: RECIPROCATING SAW BLADE cn2: RECIPROCATING SAW BLADE cn_clear: RECIPROCATINGSAWBLADE d: Product description EXPERT Reciprocating saw blade S1167XHM Wood with Metal Demolition Lasts up to 50x longer in demanding materials than Bosch's S1111DF saw blade Exceptional durability thanks to Bosch Carbide Technology. Fits all reciprocating saws with S-shank. Advantages Lasts up to 50x longer in demanding materials than Bosch's S1111DF saw blade - What could be stronger than a Bosch carbide saw blade? A carbide saw blade with reinforced teeth from Bosch, of course! Sometimes the operating conditions of a saw blade in demolition work are so tough that the teeth tear off. That's why Bosch has made them even stronger. For the toughest demolition work, Bosch developed the EXPERT 'Wood with Metal Demolition'. The progressive tooth spacing ensures that thickness changes in material do not cause unpleasant surprises; the individually reinforced tooth shoulders withstand the worst impacts of high-grade steel in wood; and all this is supported by the fact that carbide is strong enough to cut through anything. If you absolutely must demolish the most robust structures and interior components, the Bosch EXPERT 'Wood with Metal Demolition' reciprocating saw is the saw blade of choice. It can handle the most extreme operating conditions and always keeps cutting. Fits all reciprocating saws with S-shank. Long service life when cutting in wood with metalFor the toughest demolition work, Bosch developed the Expert 'Wood with Metal Demolition'. The progressive tooth spacing ensures that thickness changes in material do not cause unpleasant surprises; the individually reinforced tooth shoulders withstand the worst impacts of high-grade steel in wood; and all this is supported by the fact that carbide is strong enough to cut through anything. Fits all S-shank reciprocating saws, also known as reciprocating or demolition saws. ds: dsc: kts: Expert reciprocating saw blade Wood with Metal Demolition kpn: RECIPROZAAGBL.S1167XHM HOUT 260890039 kpn_dash: kpn_clear: RECIPROZAAGBLS1167XHMHOUT260890039 bkpn: BOSCH RECIPROZAAGBL.S1167XHM HOUT 260890039 bkpn_clear: BOSCH RECIPROZAAGBLS1167XHMHOUT260890039 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Reciprocating saw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch reciprocating saw blade | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900398 sr_ns: BOSCH2608900398
r: 02221621 p: 4.05 pid: 131611 b: BOSCH q: 0 st: lt: 4 ean: 3165140520812 sr: BOSCH 2608585846 sr_no_br: 2608585846 sr_no_br_cl: 2608585846 sr_cl: BOSCH2608585846 sr_dash: sold: 60.75 p_range: none type: standard act: 1 avo: av: Diameter 4 mm Cutting length 43 mm Drill bit type Metal drill bit Overall length 75 mm Shank size 4 mm Shank type Cylindrical Material (drill bit) HSS-E Co 5% Standard DIN 338 n: BOSCH METAALBOOR HSS-CO 4X75MM 2608585846 B metal drill bit HSS-Co, DIN 338, 4 x 43 x 75 mm - 2608585846 cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-Co, DIN 338, 4 x 43 x 75 mm Long service life when drilling in stainless steel HSS spiral drill cobalt lasts a long time when drilling in stainless steel. Cobalt alloy and fully ground HSS ensure wear resistance and heat resistance Advantages Long service life - The HSS spiral drill cobalt lasts a long time when drilling in stainless steel. This longer life is due to the steel alloy containing 5% cobalt and the fully ground HSS (High-Speed Steel), which offers excellent surface quality, wear resistance and heat resistance. Thanks to two cutting edges and two grooves, chips are quickly removed, making the drill bit last even longer. This drill is suitable for alloyed and unalloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steel. This drill bit is suitable for alloyed and unalloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steel. The drill has a cylindrical shank (drill bit and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS cobalt spiral drill bit is produced in accordance with DIN 338. The drill bit is type N (groove angle) with a tip of 135 degrees and a diameter tolerance of h8. The pointed split point ensures active cutting action and perfect centring without running. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-Co, DIN 338, 4 x 43 x 75 mm kpn: METAALBOOR HSS-CO 4X75MM 2608585846 B kpn_dash: METAALBOOR HSS kpn_clear: METAALBOORHSSCO4X75MM2608585846B bkpn: BOSCH METAALBOOR HSS-CO 4X75MM 2608585846 B bkpn_clear: BOSCH METAALBOORHSSCO4X75MM2608585846B c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608585846 sr_ns: BOSCH2608585846
r: 02221334 p: 30.32 pid: 131429 b: BOSCH q: 0 st: lt: 8 ean: 3165140087698 sr: BOSCH 2608584129 sr_no_br: 2608584129 sr_no_br_cl: 2608584129 sr_cl: BOSCH2608584129 sr_dash: sold: 60.64 p_range: none type: standard act: 1 avo: av: Diameter (hole saw) 92 mm; 3 5/8 inch n: BOSCH GATZAAG HSS-BIM 92MM 2608584129 BOSCH HSS bi-metal hole saw for standard adapter (92 mm, 3 5/8") - 2608584129 cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description HSS Bi-Metal hole saw for standard adapter 92 mm Effortless cutting The bi-metal hole saw ensures effortless cuts in various materials The tooth configuration (Vario-serrations) is ideal for gliding through the material and delivering smooth cuts Advantages Effortless cutting - The bi-metal hole saw ensures effortless cutting in different materials. The tooth configuration (Vario toothing) is ideal for gliding through the material and delivering smooth cuts. Made of HSS (high speed steel) bi-metal with 8% cobalt alloy, this hole saw has higher heat resistance and less risk of tooth breakage with prolonged cutting. Use this hole saw for working in wood, metal and plastic The bi-metal hole saw fits all standard adapters. Fits standard threaded adapter. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, sleeve, with Euro die-cut kts: HSS bi-metal hole saw for standard adapter (92 mm, 3 5/8") kpn: GATZAAG HSS-BIM 92MM 2608584129 BOSCH kpn_dash: GATZAAG HSS kpn_clear: GATZAAGHSSBIM92MM2608584129BOSCH bkpn: BOSCH GATZAAG HSS-BIM 92MM 2608584129 BOSCH bkpn_clear: BOSCH GATZAAGHSSBIM92MM2608584129BOSCH c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch hole saw sr_no_br_cl_ns: 2608584129 sr_ns: BOSCH2608584129
r: 02221639 p: 15.09 pid: 131630 b: BOSCH q: 0 st: lt: 8 ean: 3165140520997 sr: BOSCH 2608585864 sr_no_br: 2608585864 sr_no_br_cl: 2608585864 sr_cl: BOSCH2608585864 sr_dash: sold: 60.36 p_range: none type: standard act: 1 avo: av: Diameter 10 mm Cutting length 87 mm Drill bit type Metal drill bit Overall length 133 mm Shank size 10 mm Shank type Cylindrical Material (drill bit) HSS-E Co 5% Standard DIN 338 n: BOSCH METAALBOOR HSS-CO 10X133MM 2608585864 metal drill bit HSS-Co, DIN 338, 10 x 87 x 133 mm - 2608585864 cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-Co, DIN 338, 10 x 87 x 133 mm Long service life when drilling in stainless steel HSS spiral drill cobalt lasts a long time when drilling in stainless steel. Cobalt alloy and fully ground HSS ensure wear resistance and heat resistance Advantages Long service life - The HSS spiral drill cobalt lasts a long time when drilling in stainless steel. This longer life is due to the steel alloy containing 5% cobalt and the fully ground HSS (High-Speed Steel), which offers excellent surface quality, wear resistance and heat resistance. Thanks to two cutting edges and two grooves, chips are quickly removed, making the drill bit last even longer. This drill is suitable for alloyed and unalloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steel. This drill bit is suitable for alloyed and unalloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steel. The drill has a cylindrical shank (drill bit and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS cobalt spiral drill bit is produced in accordance with DIN 338. The drill bit is type N (groove angle) with a tip of 135 degrees and a diameter tolerance of h8. The pointed split point ensures active cutting action and perfect centring without running. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-Co, DIN 338, 10 x 87 x 133 mm kpn: METAALBOOR HSS-CO 10X133MM 2608585864 kpn_dash: METAALBOOR HSS kpn_clear: METAALBOORHSSCO10X133MM2608585864 bkpn: BOSCH METAALBOOR HSS-CO 10X133MM 2608585864 bkpn_clear: BOSCH METAALBOORHSSCO10X133MM2608585864 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608585864 sr_ns: BOSCH2608585864
r: 08051787 p: 6.66 pid: 136679 b: BOSCH q: 0 st: lt: 7 ean: 4059952533995 sr: BOSCH 2608900325 sr_no_br: 2608900325 sr_no_br_cl: 2608900325 sr_cl: BOSCH2608900325 sr_dash: sold: 59.94 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: av: Diameter 30 mm Drill bit type Wood drill bit Overall length 152 mm Shank size 1/4 inch Shank type Hex Material (drill bit) Chrome-vanadium steel Number of cutting edges 2 ea Product Range Bosch Expert n: BOSCH 2608900325 Expert speed drill Self Cut Speed, hexagonal shank 30 x 152 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description EXPERT Speed Drill Self Cut Speed, hex shank 30 x 152 mm Up to 3x faster than a 2609255269 speed drill bit from Bosch Fast drilling is easy with Bosch Tip Technology 1/4-inch hexagonal shank for use with three-claw drill chucks and hexagonal drill/screwdriver chucks. Advantages Up to 3x faster than a 2609255269 speed drill bit from Bosch - Speed drills are a great accessory for electricians and other installers and builders. What if they could be even faster and more efficient? With Bosch Tip Technology, it is possible. The EXPERT Self Cut Speed features the most advanced designs for speed drills, making it easy to use and very practical for professionals who need to do tough jobs. The patented Bosch screw tip brings the speed drill into wood with even the lightest pressure. This is especially useful when you need to drill upside down or into tight recesses. The advanced shovel design provides extra speed. The Bosch EXPERT Self Cut Speed drill offers efficiency and convenience to professionals who need to drill holes for cabling, pipes and other hardware installations. The drill also works perfectly in all types of softwood. 1/4-inch hex shank for use with three-claw drill chucks and hex drill/screw machine chucks. Drilling in wood at maximum speedThe Expert SelfCut Speed features the most advanced designs for speed drilling, making it easy to use and very practical for professionals with tough jobs. The patented Bosch screw tip takes the speed drill into wood with even the lightest pressure. This is especially useful when you need to drill upside down or into tight recesses. The advanced shovel design provides extra speed. Hex shank for maximum power transfer in standard three-claw and 6-sided drill chuck ds: dsc: kts: Expert speed drill Self Cut Speed, hexagonal shank 30 x 152 mm kpn: 2608900325 kpn_dash: kpn_clear: 2608900325 bkpn: BOSCH 2608900325 bkpn_clear: BOSCH 2608900325 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900325 sr_ns: BOSCH2608900325
r: 02893721 p: 29.95 pid: 132094 b: BOSCH q: 0 st: lt: 8 ean: 3165140949880 sr: BOSCH 2608594219 sr_no_br: 2608594219 sr_no_br_cl: 2608594219 sr_cl: BOSCH2608594219 sr_dash: sold: 59.9 p_range: none type: standard act: 1 avo: av: Diameter (hole saw) 52 mm Connection type Power Change n: BOSCH GATZAAG HSS-BIM 52MM POWER 2608594219 holesaw Progressor For Wood & Metal 52 mm - 2608594219 cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description Hole saw Power-Change, Wood and Metal 52 mm Long service life BiM Progressor holesaw lasts 2x longer than its predecessor Redesigned with Bosch bi-metal with 8% cobalt alloy for extra durability Advantages Lasts 2x longer - The BiM Progressor holesaw lasts 2x longer than its predecessor. The saw has been redesigned with Bosch bi-metal with 8% cobalt alloy for extra durability. In addition, it has improved progressive teeth that allow for faster cuts. Use this hole saw when drilling in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. It is suitable for all corded and cordless drill/drivers. For use with the tool-free Bosch Power Change Plus adapter: offers accuracy and robustness. ds: dsc: kts: holesaw Progressor For Wood & Metal 52 mm kpn: GATZAAG HSS-BIM 52MM POWER 2608594219 kpn_dash: GATZAAG HSS kpn_clear: GATZAAGHSSBIM52MMPOWER2608594219 bkpn: BOSCH GATZAAG HSS-BIM 52MM POWER 2608594219 bkpn_clear: BOSCH GATZAAGHSSBIM52MMPOWER2608594219 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch hole saw sr_no_br_cl_ns: 2608594219 sr_ns: BOSCH2608594219
r: 01048937 p: 2.98 pid: 128730 b: BOSCH q: 0 st: lt: 5 ean: 3165140059138 sr: BOSCH 2608596307 sr_no_br: 2608596307 sr_no_br_cl: 2608596307 sr_cl: BOSCH2608596307 sr_dash: sold: 59.6 p_range: none type: standard act: 1 avo: av: Diameter 10 mm Drill bit type Wood drill bit Overall length 120 mm Shank size 10 mm Shank type Cylindrical Material (drill bit) HSS Number of cutting edges 2 ea Cutting length 80 mm n: BOSCH 2608596307 wood spiral drill bit Standard 10 x 80 x 120 mm, d 10 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Wood spiral drill bit Standard 10 x 80 x 120 mm, d 10 mm Precision drilling in wood Drill bit with centre point for accurate drilling in softwood and hardwood. Thanks to this extremely sharp drill bit with centring tip, you can always position a hole accurately Advantages Accurate drilling - this drill bit with a centring tip enables very accurate drilling in softwood and hardwood. It can be used for through holes and pot holes. Extremely sharp drill bit with centring point, so that the drill hole is precisely positioned. Splinter-free holes are made with shoulder cutters with precise edges. For precise results, the two grooves prevent material from clogging the hole and the material is removed efficiently. This drill bit is suitable for softwood and hardwood. This drill has a cylindrical shank. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: wood spiral drill bit Standard 10 x 80 x 120 mm, d 10 mm kpn: 2608596307 kpn_dash: kpn_clear: 2608596307 bkpn: BOSCH 2608596307 bkpn_clear: BOSCH 2608596307 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608596307 sr_ns: BOSCH2608596307
r: 02893703 p: 19.68 pid: 132079 b: BOSCH q: 0 st: lt: 8 ean: 3165140949750 sr: BOSCH 2608594206 sr_no_br: 2608594206 sr_no_br_cl: 2608594206 sr_cl: BOSCH2608594206 sr_dash: sold: 59.04 p_range: none type: standard act: 1 avo: av: Diameter (hole saw) 30 mm Connection type Power Change n: BOSCH GATZAAG HSS-BIM 30MM POWER 2608594206 holesaw Progressor For Wood & Metal 30 mm - 2608594206 cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description Hole saw Power-Change, Wood and Metal 30 mm Long service life BiM Progressor holesaw lasts 2x longer than its predecessor Redesigned with Bosch bi-metal with 8% cobalt alloy for extra durability Advantages Lasts 2x longer - The BiM Progressor holesaw lasts 2x longer than its predecessor. The saw has been redesigned with Bosch bi-metal with 8% cobalt alloy for extra durability. In addition, it has improved progressive teeth that allow for faster cuts. Use this hole saw when drilling in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. It is suitable for all corded and cordless drill/drivers. For use with the tool-free Bosch Power Change Plus adapter: offers accuracy and robustness. ds: dsc: kts: holesaw Progressor For Wood & Metal 30 mm kpn: GATZAAG HSS-BIM 30MM POWER 2608594206 kpn_dash: GATZAAG HSS kpn_clear: GATZAAGHSSBIM30MMPOWER2608594206 bkpn: BOSCH GATZAAG HSS-BIM 30MM POWER 2608594206 bkpn_clear: BOSCH GATZAAGHSSBIM30MMPOWER2608594206 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch hole saw sr_no_br_cl_ns: 2608594206 sr_ns: BOSCH2608594206
r: 02791985 p: 29.45 pid: 137051 b: BOSCH q: 0 st: lt: 8 ean: 3165140858014 sr: BOSCH 2608577011 sr_no_br: 2608577011 sr_no_br_cl: 2608577011 sr_cl: BOSCH2608577011 sr_dash: sold: 58.9 p_range: none type: standard act: 1 avo: av: Diameter 27 mm Cutting length 90 mm Drill bit type Wood drill bit Overall length 90 mm Shank size 8 mm Shank type Cylindrical Material (drill bit) HSS n: BOSCH HOUTBOOR 27MM 2608577011 BOSCH machine wood drill bit with shank diameter 8 mm, toothed design, 27 x 90 mm - 2608577011 cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Machine wood drill bit 27 x 90 mm, d 8 mm, toothed-edge Outstanding lifetime for accurate drill holes Machine wood drill bit has an outstanding lifetime for drilling accurate holes The toothed-edge design generates less friction and heat, making the drill bit last longer Advantages Excellent lifetime - The machine wood drill has an outstanding lifetime for drilling accurate holes. The serrated design generates less friction and heat, making the drill bit last longer. The accurate short centring tip has two main cutting edges and an edge cutting edge (toothed) for optimum results. Due to the large chip-free zones, which optimise chip removal, drilling accuracy is even higher. This allows splinter-free drilling of smooth blind holes, as well as corner drilling, e.g. when fastening hinges or dowels and removing brush holes. To be used for soft- and hardwood, veneer and non-laminated chipboard. It is intended for all drills (drill/screw machines, drill stands) with a 10 mm chuck. The 3-sided shank of the machine wood drill prevents it from rotating in the drill head. Manufactured according to DIN 7483G, hardness of cutting part is at least 50 HRC. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: Scope of delivery Precision drill bit with two main and side cutting edges as well as short centring tip kts: machine wood drill bit with shank diameter 8 mm, toothed design, 27 x 90 mm kpn: HOUTBOOR 27MM 2608577011 BOSCH kpn_dash: kpn_clear: HOUTBOOR27MM2608577011BOSCH bkpn: BOSCH HOUTBOOR 27MM 2608577011 BOSCH bkpn_clear: BOSCH HOUTBOOR27MM2608577011BOSCH c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577011 sr_ns: BOSCH2608577011
r: 02221379 p: 29.34 pid: 134190 b: BOSCH q: 0 st: lt: 10 ean: 3165140376211 sr: BOSCH 2608584800 sr_no_br: 2608584800 sr_no_br_cl: 2608584800 sr_cl: BOSCH2608584800 sr_dash: sold: 58.68 p_range: none type: standard act: 1 avo: av: Diameter (hole saw) 64 mm; 2 1/2 inch Connection type Power Change n: BOSCH GATZAAG HSS-BIM 64MM POWER 2608584800 holesaw special for sheet metal 64 mm - 2608584800 cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description Hole saw Power-Change, Sheet Metal 64 mm Durable in sheet metal Special for Sheet Metal hole saw offers durability when cutting through metal Made of HSS bi-metal with 8% cobalt alloy for extreme resilience and long life Advantages Durable when cutting through sheet metal - The Special for Sheet Metal hole saw offers durability when cutting through metal. This hole saw is made of HSS (high speed steel) bi-metal with an alloy of 8% cobalt. The saw has a long life, higher heat resistance and less risk of tooth breakage under extreme resilience. The tooth configuration (Vario toothing) is ideal for cutting through thin material with reduced wear on the cutting edge. In addition, a depth stop function prevents material from breaking through to protect the working surface. Use this hole saw when cutting through sheet metal less than 5 mm thick, such as mild steel and stainless steel. It is suitable for all corded and cordless drilling/screwing machines. The Special for Sheet Metal holesaw features Bosch's unique power-change adapter with the fastest attachment system on the market. It allows you to lock and unlock the holesaw and centring bits in one click. For use with the tool-free Bosch Power Change Plus adapter: offers accuracy and robustness. ds: dsc: kts: holesaw special for sheet metal 64 mm kpn: GATZAAG HSS-BIM 64MM POWER 2608584800 kpn_dash: GATZAAG HSS kpn_clear: GATZAAGHSSBIM64MMPOWER2608584800 bkpn: BOSCH GATZAAG HSS-BIM 64MM POWER 2608584800 bkpn_clear: BOSCH GATZAAGHSSBIM64MMPOWER2608584800 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch hole saw sr_no_br_cl_ns: 2608584800 sr_ns: BOSCH2608584800
r: 08052049 p: 58.59 pid: 131754 b: BOSCH q: 0 st: lt: 8 ean: 4059952539324 sr: BOSCH 2608900639 sr_no_br: 2608900639 sr_no_br_cl: 2608900639 sr_cl: BOSCH2608900639 sr_dash: sold: 58.59 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: av: Diameter 5,5 mm Drill bit type Multi-purpose drill bit Overall length 85 mm Shank size 5,5 mm Shank type Cylindrical Material (drill bit) Carbide tip Cutting length 50 mm Product Range Bosch Expert n: BOSCH UNIVERSEELBOOR 5,5X85MM 2608900639 BO Expert universal drill CYL-9 MultiConstruction 10pcs 5.5x50x85mm - 2608900639 cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description EXPERT Universal drill bit CYL-9 MultiConstruction 10pcs 5.5x50x85 Up to 5x more accurate than Bosch's CYL-3 drill bit Accurate drilling is easy with the patented Bosch Centering Geometry. Cylindrical shank compatible with three-claw drill chucks. Advantages Up to 5x more accurate than Bosch's CYL-3 drill bit - On a modern construction site, you work with many different materials and you never know what's next to drill. Finding the right drill bit can be difficult and time-consuming, unless you have the EXPERT MultiConstruction drill bit on hand. This extremely versatile drill bit can accurately drill into hard materials like granite without slipping thanks to its sharp tip and advanced geometric design. Made of optimised carbide by our fine grinding manufacturing techniques. The drill can also handle concrete, brick, soft tiles, wood and metal. Always a professional result, regardless of the material. The Bosch EXPERT CYL-9 MultiConstruction cylindrical drill bit is the only drill bit that should always be in your toolbox: you will never lose time searching for the right drill bit again. Cylindrical shank compatible with three-claw drill chucks. Maximum precision when drilling in various materialsThis extremely versatile drill bit can accurately drill into hard materials such as tiles and granite without slipping thanks to its sharp tip and advanced geometric design. Made of optimised carbide by our fine grinding manufacturing techniques. The drill can also handle concrete, brick, wood and metal. Always a professional result regardless of the material. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: Expert universal drill CYL-9 MultiConstruction 10pcs 5.5x50x85mm kpn: UNIVERSEELBOOR 5,5X85MM 2608900639 BO kpn_dash: kpn_clear: UNIVERSEELBOOR55X85MM2608900639BO bkpn: BOSCH UNIVERSEELBOOR 5,5X85MM 2608900639 BO bkpn_clear: BOSCH UNIVERSEELBOOR55X85MM2608900639BO c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900639 sr_ns: BOSCH2608900639
r: 02221616 p: 2.92 pid: 131686 b: BOSCH q: 0 st: lt: 8 ean: 3165140520768 sr: BOSCH 2608585841 sr_no_br: 2608585841 sr_no_br_cl: 2608585841 sr_cl: BOSCH2608585841 sr_dash: sold: 58.4 p_range: none type: standard act: 1 avo: av: Diameter 2,5 mm Cutting length 30 mm Drill bit type Metal drill bit Overall length 57 mm Shank size 2,5 mm Shank type Cylindrical Material (drill bit) HSS-E Co 5% Standard DIN 338 n: BOSCH METAALBOOR HSS-CO 2,5X57MM 2608585841 metal drill bit HSS-Co, DIN 338, 2.5 x 30 x 57 mm - 2608585841 cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-Co, DIN 338, 2.5 x 30 x 57 mm Long service life when drilling in stainless steel HSS spiral drill cobalt lasts a long time when drilling in stainless steel. Cobalt alloy and fully ground HSS ensure wear resistance and heat resistance Advantages Long service life - The HSS spiral drill cobalt lasts a long time when drilling in stainless steel. This longer life is due to the steel alloy containing 5% cobalt and the fully ground HSS (High-Speed Steel), which offers excellent surface quality, wear resistance and heat resistance. Thanks to two cutting edges and two grooves, chips are quickly removed, making the drill bit last even longer. This drill is suitable for alloyed and unalloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steel. This drill bit is suitable for alloyed and unalloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steel. The drill has a cylindrical shank (drill bit and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS cobalt spiral drill bit is produced in accordance with DIN 338. The drill bit is type N (groove angle) with a tip of 135 degrees and a diameter tolerance of h8. The pointed split point ensures active cutting action and perfect centring without running. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-Co, DIN 338, 2.5 x 30 x 57 mm kpn: METAALBOOR HSS-CO 2,5X57MM 2608585841 kpn_dash: METAALBOOR HSS kpn_clear: METAALBOORHSSCO25X57MM2608585841 bkpn: BOSCH METAALBOOR HSS-CO 2,5X57MM 2608585841 bkpn_clear: BOSCH METAALBOORHSSCO25X57MM2608585841 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608585841 sr_ns: BOSCH2608585841
r: 02783776 p: 9.71 pid: 128323 b: BOSCH q: 0 st: lt: 10 ean: 3165140596961 sr: BOSCH 2608636702 sr_no_br: 2608636702 sr_no_br_cl: 2608636702 sr_cl: BOSCH2608636702 sr_dash: sold: 58.26 p_range: none type: standard act: 1 avo: av: Length 92 mm For material Metal Quantity per blister 5 n: BOSCH DECOUPEERZAAGBL.T121BF5 MET.2608636702 jigsaw blade T 121 BF Speed for Metal (5 pcs) - 2608636702 cn: JIGSAW BLADE cn2: JIGSAW BLADE cn_clear: JIGSAWBLADE d: Product description Jigsaw blade T121 BF Speed for Metal 5x Fast cuts in perforated sheet metal T 121 BF Speed for Metal jigsaw blade offers fast straight cuts in metal Patented reverse taper body and thin kerf design provide unmatched cutting speed Advantages Fast cuts in sheet metal - The T 121 BF Speed for Metal jigsaw blade offers fast straight cuts in metal. Features a patented inverted taper body and thin kerf design that ensure unmatched cutting speed. In addition, a patented tooth geometry and a combination of aggressive and robust teeth further increase cutting speeds. The milled and corrugated teeth are designed for cutting in metal sheets. The fully hardened BIM (bimetallic) HSS teeth are attached to a highly elastic HCS body that makes the blade break-resistant. Furthermore, it provides sufficient hardness and the required flexibility to cut through perforated sheet metal of steel of standard strength. The jigsaw blade has a fine tooth spacing (2mm) and cuts in medium-thick metal sheets from 2.5 - 6mm thick. For use with jigsaws with a T-shank click system. Fits all jigsaws with a T-shank. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, folding carton, with Euro die-cutting kts: jigsaw blade T 121 BF Speed for Metal (5 pcs) kpn: DECOUPEERZAAGBL.T121BF5 MET.2608636702 kpn_dash: kpn_clear: DECOUPEERZAAGBLT121BF5MET2608636702 bkpn: BOSCH DECOUPEERZAAGBL.T121BF5 MET.2608636702 bkpn_clear: BOSCH DECOUPEERZAAGBLT121BF5MET2608636702 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Jigsaw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch jigsaw blade sr_no_br_cl_ns: 2608636702 sr_ns: BOSCH2608636702
r: 02221312 p: 14.46 pid: 132839 b: BOSCH q: 0 st: lt: 9 ean: 3165140087452 sr: BOSCH 2608584105 sr_no_br: 2608584105 sr_no_br_cl: 2608584105 sr_cl: BOSCH2608584105 sr_dash: sold: 57.84 p_range: none type: standard act: 1 avo: av: Diameter (hole saw) 25 mm; 1 inch n: BOSCH GATZAAG HSS-BIM 25MM 2608584105 BOSCH HSS bi-metal hole saw for standard adapter (25 mm, 1") - 2608584105 cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description HSS Bi-Metal hole saw for standard adapter 25 mm Effortless cutting The bi-metal hole saw ensures effortless cuts in various materials The tooth configuration (Vario-serrations) is ideal for gliding through the material and delivering smooth cuts Advantages Effortless cutting - The bi-metal hole saw ensures effortless cutting in different materials. The tooth configuration (Vario toothing) is ideal for gliding through the material and delivering smooth cuts. Made of HSS (high speed steel) bi-metal with 8% cobalt alloy, this hole saw has higher heat resistance and less risk of tooth breakage with prolonged cutting. Use this hole saw for working in wood, metal and plastic The bi-metal hole saw fits all standard adapters. Fits standard threaded adapter. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, sleeve, with Euro die-cut kts: HSS bi-metal hole saw for standard adapter (25 mm, 1") kpn: GATZAAG HSS-BIM 25MM 2608584105 BOSCH kpn_dash: GATZAAG HSS kpn_clear: GATZAAGHSSBIM25MM2608584105BOSCH bkpn: BOSCH GATZAAG HSS-BIM 25MM 2608584105 BOSCH bkpn_clear: BOSCH GATZAAGHSSBIM25MM2608584105BOSCH c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch hole saw sr_no_br_cl_ns: 2608584105 sr_ns: BOSCH2608584105
r: 02221620 p: 3.83 pid: 134370 b: BOSCH q: 0 st: lt: 10 ean: 3165140520805 sr: BOSCH 2608585845 sr_no_br: 2608585845 sr_no_br_cl: 2608585845 sr_cl: BOSCH2608585845 sr_dash: sold: 57.45 p_range: none type: standard act: 1 avo: av: Diameter 3,5 mm Cutting length 39 mm Drill bit type Metal drill bit Overall length 70 mm Shank size 3,5 mm Shank type Cylindrical Material (drill bit) HSS-E Co 5% Standard DIN 338 n: BOSCH METAALBOOR HSS-CO 3,5X70MM 2608585845 metal drill bit HSS-Co, DIN 338, 3.5 x 39 x 70 mm - 2608585845 cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-Co, DIN 338, 3.5 x 39 x 70 mm Long service life when drilling in stainless steel HSS spiral drill cobalt lasts a long time when drilling in stainless steel. Cobalt alloy and fully ground HSS ensure wear resistance and heat resistance Advantages Long service life - The HSS spiral drill cobalt lasts a long time when drilling in stainless steel. This longer life is due to the steel alloy containing 5% cobalt and the fully ground HSS (High-Speed Steel), which offers excellent surface quality, wear resistance and heat resistance. Thanks to two cutting edges and two grooves, chips are quickly removed, making the drill bit last even longer. This drill is suitable for alloyed and unalloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steel. This drill bit is suitable for alloyed and unalloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steel. The drill has a cylindrical shank (drill bit and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS cobalt spiral drill bit is produced in accordance with DIN 338. The drill bit is type N (groove angle) with a tip of 135 degrees and a diameter tolerance of h8. The pointed split point ensures active cutting action and perfect centring without running. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-Co, DIN 338, 3.5 x 39 x 70 mm kpn: METAALBOOR HSS-CO 3,5X70MM 2608585845 kpn_dash: METAALBOOR HSS kpn_clear: METAALBOORHSSCO35X70MM2608585845 bkpn: BOSCH METAALBOOR HSS-CO 3,5X70MM 2608585845 bkpn_clear: BOSCH METAALBOORHSSCO35X70MM2608585845 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608585845 sr_ns: BOSCH2608585845
