r: 08051571 p: 25.81 pid: 138174 b: BOSCH q: 0 st: lt: 8 ean: 4059952531045 sr: BOSCH 2608900052 sr_no_br: 2608900052 sr_no_br_cl: 2608900052 sr_cl: BOSCH2608900052 sr_dash: sold: 103.24 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: av: Grit size 20 Product Range Bosch Expert n: BOSCH SCHUURPLATEAU MAVZ116RT2 2608900052 B Expert MAVZ 116 RT2 sanding pad multi-tool saw blade 116 mm - 2608900052 cn: SANDING/GRINDING SHEET FOR OSCILLATING MULTI-TOOL cn2: SANDING/GRINDING SHEET FOR OSCILLATING MULTI-TOOL cn_clear: SANDINGGRINDINGSHEETFOROSCILLATINGMULTITOOL d: Product description EXPERT StarlockMax Carbide sanding pad Multimaterial MAVZ116RT2 Long-term sanding with Carbide Technology Exceptional durability thanks to Bosch Carbide Technology. StarlockMax connection for maximum power transfer and convenient saw blade changes within 3 seconds. Advantages Long-lasting sanding with Carbide Technology - Small but tough sanding jobs to remove old material and prepare surfaces for work are sometimes almost impossible with conventional sanders or by hand. Even if you can reach the surface, sandpaper breaks down on these jobs. With the EXPERT sanding pad, however, you reach tricky corners and sand difficult materials with the oscillating multitool. Using Bosch Carbide Technology, grains of the hardest metal are firmly fixed to the surface. This sharp grit remains fully effective throughout its long life as you can clean it with solvent. The EXPERT sanding pad is designed for multiple materials and users. The coarse, open grains of the RT2 (grain size 20) lend themselves best to removing mortar behind tiles; removing carpet glue; or rough shaping wood. The RT4 (grit size 40) is best for removing thick paint but can also handle mortar and glue if necessary. The RT6 (grit 60) is the paint specialist, while the RT10 (grit 100) is ideal for sanding and preparing clean wooden surfaces. StarlockMax connection for maximum power transfer and convenient saw blade changes within 3 seconds. Long life when sanding various materialsWith the help of Bosch Carbide Technology, grains of the hardest metal are firmly fixed to the surface. This sharp grit remains fully effective throughout its long lifetime as you can clean it with solvent. The Expert Sanding Plate is designed for multiple materials and users. Starlock connection for maximum power transfer and an easy saw blade change within three seconds. ds: dsc: kts: Expert MAVZ 116 RT2 sanding pad multi-tool saw blade 116 mm kpn: SCHUURPLATEAU MAVZ116RT2 2608900052 B kpn_dash: kpn_clear: SCHUURPLATEAUMAVZ116RT22608900052B bkpn: BOSCH SCHUURPLATEAU MAVZ116RT2 2608900052 B bkpn_clear: BOSCH SCHUURPLATEAUMAVZ116RT22608900052B c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding/grinding blade for oscillating multi-tool | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch surface treatment / Bosch sanding, sharpening, polishing and deburring / Bosch sanding/grinding blade for oscillating multi-tool | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900052 sr_ns: BOSCH2608900052
r: 02224340 p: 10.15 pid: 130687 b: BOSCH q: 0 st: lt: 8 ean: 3165140235600 sr: BOSCH 2608656268 sr_no_br: 2608656268 sr_no_br_cl: 2608656268 sr_cl: BOSCH2608656268 sr_dash: sold: 101.5 p_range: none type: standard act: 1 avo: av: Length 100 mm Thickness 0,9 mm For material Metal Number of teeth per inch 14 Quantity per blister 2 n: BOSCH RECIPROZAAGBL.S422BF METAAL 260865626 reciprocating saw blade Flexible for Metal (2 pcs) - 2608656268 cn: RECIPROCATING SAW BLADE cn2: RECIPROCATING SAW BLADE cn_clear: RECIPROCATINGSAWBLADE d: Product description Reciprocating saw blade S 422 BF Flexible for Metal 2x For curved cuts with compact saws S 422 BF Flexible for Metal reciprocating saw blade is intended for curved cuts with compact saws Blade with cut-out for ultimate curve-cutting capability Advantages Curved cuts - The S 422 BF Flexible for Metal reciprocating saw blade is intended for curved cuts with compact saws. The blade with cut-out gives ultimate possibilities for curved cuts. Moreover, the BIM (bi-metal) blade is manufactured for long service life when cutting sheet metal of standard strength. The reciprocating saw blade features a very fine tooth spacing (1.8 mm) for cutting sheet metal from 1.5 to 6 mm thick. The short length gives a cutting capacity of up to 50 mm, and makes it ideal for use with compact cordless saws. Fitted with 1/2-inch universal shank. Fits all reciprocating saws with S-shank. ds: dsc: kts: reciprocating saw blade Flexible for Metal (2 pcs) kpn: RECIPROZAAGBL.S422BF METAAL 260865626 kpn_dash: kpn_clear: RECIPROZAAGBLS422BFMETAAL260865626 bkpn: BOSCH RECIPROZAAGBL.S422BF METAAL 260865626 bkpn_clear: BOSCH RECIPROZAAGBLS422BFMETAAL260865626 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Reciprocating saw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch reciprocating saw blade sr_no_br_cl_ns: 2608656268 sr_ns: BOSCH2608656268
r: 02221349 p: 25.25 pid: 134159 b: BOSCH q: 0 st: lt: 8 ean: 3165140104388 sr: BOSCH 2608584144 sr_no_br: 2608584144 sr_no_br_cl: 2608584144 sr_cl: BOSCH2608584144 sr_dash: sold: 101 p_range: none type: standard act: 1 avo: av: Diameter (hole saw) 67 mm; 2 5/8 inch n: BOSCH GATZAAG HSS-BIM 67MM 2608584144 BOSCH HSS bi-metal hole saw for standard adapter (67 mm, 2 5/8") - 2608584144 cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description HSS Bi-Metal hole saw for standard adapter 67 mm Effortless cutting The bi-metal hole saw ensures effortless cuts in various materials The tooth configuration (Vario-serrations) is ideal for gliding through the material and delivering smooth cuts Advantages Effortless cutting - The bi-metal hole saw ensures effortless cutting in different materials. The tooth configuration (Vario toothing) is ideal for gliding through the material and delivering smooth cuts. Made of HSS (high speed steel) bi-metal with 8% cobalt alloy, this hole saw has higher heat resistance and less risk of tooth breakage with prolonged cutting. Use this hole saw for working in wood, metal and plastic The bi-metal hole saw fits all standard adapters. Fits standard threaded adapter. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, sleeve, with Euro die-cut kts: HSS bi-metal hole saw for standard adapter (67 mm, 2 5/8") kpn: GATZAAG HSS-BIM 67MM 2608584144 BOSCH kpn_dash: GATZAAG HSS kpn_clear: GATZAAGHSSBIM67MM2608584144BOSCH bkpn: BOSCH GATZAAG HSS-BIM 67MM 2608584144 BOSCH bkpn_clear: BOSCH GATZAAGHSSBIM67MM2608584144BOSCH c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch hole saw sr_no_br_cl_ns: 2608584144 sr_ns: BOSCH2608584144
r: 02221296 p: 100.99 pid: 131388 b: BOSCH q: 0 st: lt: 8 ean: 3165140489157 sr: BOSCH 2608580316 sr_no_br: 2608580316 sr_no_br_cl: 2608580316 sr_cl: BOSCH2608580316 sr_dash: sold: 100.99 p_range: none type: standard act: 1 avo: av: Diameter 67 mm Connection size (machine) M14 n: BOSCH DIAMANTGATZAAG 67MM CERAM.2608580316 diamond holesaw Power-Change, Diamond for Hard Ceramics 67 mm - 2608580316 cn: DIAMOND DRILL BIT cn2: DIAMOND DRILL BIT cn_clear: DIAMONDDRILLBIT d: Product description Diamond hole saw Power-Change, Diamond for Hard Ceramics 67 mm Drills through the hardest tiles Diamond for Hard Ceramics cuts through the hardest tiles Diamond coating gives this holesaw durability when drilling into very hard tiles Benefits Drills into the hardest tiles - The Diamond for Hard Ceramics holesaw cuts through the hardest tiles. Thanks to its diamond coating, this holesaw lasts a long time when drilling into very hard tiles made of all kinds of ceramic materials. The thin cutting edge of this holesaw ensures sharp edges. Use this hole saw when drilling into wall and floor tiles. It is suitable for corded and cordless drilling/screwing machines. The Diamond for Hard Ceramics diamond holesaw features Bosch's unique power-change adapter with the fastest mounting system on the market. It allows locking and unlocking of the holesaw and centring bits in one click. For use with the tool-free Bosch Power Change Plus adapter: offers accuracy and robustness. ds: dsc: kts: diamond holesaw Power-Change, Diamond for Hard Ceramics 67 mm kpn: DIAMANTGATZAAG 67MM CERAM.2608580316 kpn_dash: kpn_clear: DIAMANTGATZAAG67MMCERAM2608580316 bkpn: BOSCH DIAMANTGATZAAG 67MM CERAM.2608580316 bkpn_clear: BOSCH DIAMANTGATZAAG67MMCERAM2608580316 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Diamond drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch diamond drill bit sr_no_br_cl_ns: 2608580316 sr_ns: BOSCH2608580316
r: 02222461 p: 50.21 pid: 132007 b: BOSCH q: 0 st: lt: 8 ean: 3165140148269 sr: BOSCH 2608597610 sr_no_br: 2608597610 sr_no_br_cl: 2608597610 sr_cl: BOSCH2608597610 sr_dash: sold: 100.42 p_range: none type: standard act: 1 avo: av: Diameter 30 mm Cutting length 90 mm Drill bit type Wood drill bit Overall length 90 mm Shank size 8 mm Shank type Cylindrical Material (drill bit) Carbide tip n: BOSCH SCHARNIERBOOR 30MM 2608597610 BOSCH artillery drill carbide 30 x 90 mm, d 8 mm - 2608597610 cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Artificial carbide drill 30 x 90 mm, d 8 mm Precise holes in abrasive materials The tungsten carbide hinge drill bit can be used to drill very precise holes in abrasive materials Gives fantastic results due to carbide cutting edges combined with diamond-ground tungsten Advantages For holes that are just big enough - The tungsten carbide hinge drill bit allows very precise holes to be drilled in abrasive materials. Its special characteristics make it ideal for joiners and carpenters, especially for the production of windows, doors and kitchens. Due to the carbide, with diamond-ground tungsten cutting edges, this drill produces the best results. In addition, the centring tip helps ensure an accurate drill point start, and the two main and side cutting edges shoot through the material, for highly accurate and splinter-free blind holes. Suitable for abrasive materials, such as hardwood, plywood, chipboard and fibreboard. This hinge drill has a cylindrical shank and is intended for use in portable drills and drill stands. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: artillery drill carbide 30 x 90 mm, d 8 mm kpn: SCHARNIERBOOR 30MM 2608597610 BOSCH kpn_dash: kpn_clear: SCHARNIERBOOR30MM2608597610BOSCH bkpn: BOSCH SCHARNIERBOOR 30MM 2608597610 BOSCH bkpn_clear: BOSCH SCHARNIERBOOR30MM2608597610BOSCH c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608597610 sr_ns: BOSCH2608597610
r: 02276903 p: 9.93 pid: 130756 b: BOSCH q: 0 st: lt: 8 ean: 3165140690454 sr: BOSCH 2608588155 sr_no_br: 2608588155 sr_no_br_cl: 2608588155 sr_cl: BOSCH2608588155 sr_dash: sold: 99.3 p_range: none type: standard act: 1 avo: av: Diameter 10 mm Cutting length 100 mm Drill bit type Concrete drill bit Overall length 150 mm Shank size 10 mm Shank type Cylindrical Material (drill bit) Carbide tip n: BOSCH BETONBOOR 10X150MM 2608588155 BOSCH concrete drill CYL-5, 10 x 100 x 150 mm - 2608588155 cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Concrete drill bit CYL-5, 10 x 100 x 150 mm Long service life in concrete and stone CYL-5 drill bit lasts a long time when drilling fixing holes in concrete and stone Bosch carbide mixture and diamond-ground cutting edges for a wear-resistant drill bit Advantages Extra long life - Drill bit CYL-5 lasts extra long when drilling in concrete and stone. The drill bit is extremely wear-resistant thanks to a combination of diamond-ground cutting edges and a carbide mixture developed by Bosch itself. Friction on the spiral through drilled material is significantly reduced thanks to a vario design with 2 spirals with a short, variable slope for good drill dust removal and less wear. The Bosch Power Grip Shank System ensures that power is fully transferred from machine to drill bit. This allows the full power of the machine to be used for drilling and the drill bit wears less quickly. For drilling fixing holes in concrete, natural and artificial stone. This drill fits cylinder shank systems for all corded or cordless drills. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that this drill bit is within close tolerances, drills very accurately and does not slip while drilling fixing holes. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: concrete drill CYL-5, 10 x 100 x 150 mm kpn: BETONBOOR 10X150MM 2608588155 BOSCH kpn_dash: kpn_clear: BETONBOOR10X150MM2608588155BOSCH bkpn: BOSCH BETONBOOR 10X150MM 2608588155 BOSCH bkpn_clear: BOSCH BETONBOOR10X150MM2608588155BOSCH c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608588155 sr_ns: BOSCH2608588155
r: 08051996 p: 49.54 pid: 130242 b: BOSCH q: 0 st: lt: 8 ean: 4059952537900 sr: BOSCH 2608900566 sr_no_br: 2608900566 sr_no_br_cl: 2608900566 sr_cl: BOSCH2608900566 sr_dash: sold: 99.08 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: av: Product Range Bosch Expert n: BOSCH DECOUPEERZAAGB.T301CHM PLA. 260890056 jigsaw blade T 301 CHM Expert Plastic Composites Clean (3 pack) - 2608900566 cn: JIGSAW BLADE cn2: JIGSAW BLADE cn_clear: JIGSAWBLADE d: Product description EXPERT Jigsaw blade T301CHM 3pcs Plastic Composites clean Carbide Technology for long-life performance Exceptional durability thanks to Bosch Carbide Technology. Fits all jigsaws with a T-shank. Advantages Carbide Technology for long-life performance - Solid surface materials offer surprising versatility in modern bathroom and kitchen installations and are easier to cut than stone or ceramic. This must be done carefully if you don't want to make a costly mistake; the EXPERT 'Plastic Composites Clean' is designed for this purpose and strong enough to get the job done. The EXPERT 'Plastic Composites Clean' has the right quality to make the perfect cut and is strong enough to do this many times in a row. The tooth geometry is optimised for cutting specialised high-tech materials such as wood and plastic composites (WPC) and solid surface materials. The saw blade's extreme durability is achieved with Bosch Carbide Technology: the teeth are cross-ground from a single strip of the hardest metal. These properties make the Bosch EXPERT 'Plastic Composites Clean' jigsaw blade the perfect choice for kitchen and bathroom construction and WPC work. It has a high added value thanks to its long lifetime while offering top-quality results. Fits all jigsaws with a T-shank. Long service life in clean cutting of solid surfaces and WPCThe Expert 'Plastic Composites Clean' has the right quality to make the perfect cut and is strong enough to do so many times in a row. The tooth geometry is optimised for cutting specialised high-tech materials such as wood and plastic composites (WPC) and solid surface materials. The saw blade's extreme durability is achieved with Bosch Carbide Technology: the teeth are cross-ground from a single strip of the hardest metal. Fits all jigsaws with a T-shank. ds: dsc: kts: jigsaw blade T 301 CHM Expert Plastic Composites Clean (3 pack) kpn: DECOUPEERZAAGB.T301CHM PLA. 260890056 kpn_dash: kpn_clear: DECOUPEERZAAGBT301CHMPLA260890056 bkpn: BOSCH DECOUPEERZAAGB.T301CHM PLA. 260890056 bkpn_clear: BOSCH DECOUPEERZAAGBT301CHMPLA260890056 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Jigsaw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch jigsaw blade | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900566 sr_ns: BOSCH2608900566
r: 01049259 p: 24.52 pid: 128942 b: BOSCH q: 0 st: lt: 8 ean: 3165140045179 sr: BOSCH 2608596118 sr_no_br: 2608596118 sr_no_br_cl: 2608596118 sr_cl: BOSCH2608596118 sr_dash: sold: 98.08 p_range: none type: standard act: 1 avo: av: Diameter 14 mm Cutting length 400 mm Drill bit type Hammer drill bit Overall length 465 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH HAMERBOOR SDS+ 14X465MM 2608596118 2- hammer drill SDS-Plus-5, 14 x 400 x 465 mm - 2608596118 cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 14 x 400 x 465 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 14 x 400 x 465 mm kpn: HAMERBOOR SDS+ 14X465MM 2608596118 2- kpn_dash: HAMERBOOR SDS+ 14X465MM 2608596118 2 kpn_clear: HAMERBOORSDS14X465MM26085961182 bkpn: BOSCH HAMERBOOR SDS+ 14X465MM 2608596118 2- bkpn_clear: BOSCH HAMERBOORSDS14X465MM26085961182 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608596118 sr_ns: BOSCH2608596118
r: 02221294 p: 97.81 pid: 134097 b: BOSCH q: 0 st: lt: 8 ean: 3165140489126 sr: BOSCH 2608580314 sr_no_br: 2608580314 sr_no_br_cl: 2608580314 sr_cl: BOSCH2608580314 sr_dash: sold: 97.81 p_range: none type: standard act: 1 avo: av: Diameter 64 mm n: BOSCH DIAMANTGATZAAG 64MM CERAM.2608580314 diamond holesaw Power-Change, Diamond for Hard Ceramics 64 mm - 2608580314 cn: DIAMOND DRILL BIT cn2: DIAMOND DRILL BIT cn_clear: DIAMONDDRILLBIT d: Product description Diamond hole saw Power-Change, Diamond for Hard Ceramics 64 mm Drills through the hardest tiles Diamond for Hard Ceramics cuts through the hardest tiles Diamond coating gives this holesaw durability when drilling into very hard tiles Benefits Drills into the hardest tiles - The Diamond for Hard Ceramics holesaw cuts through the hardest tiles. Thanks to its diamond coating, this holesaw lasts a long time when drilling into very hard tiles made of all kinds of ceramic materials. The thin cutting edge of this holesaw ensures sharp edges. Use this hole saw when drilling into wall and floor tiles. It is suitable for corded and cordless drilling/screwing machines. The Diamond for Hard Ceramics diamond holesaw features Bosch's unique power-change adapter with the fastest mounting system on the market. It allows locking and unlocking of the holesaw and centring bits in one click. For use with the tool-free Bosch Power Change Plus adapter: offers accuracy and robustness. ds: dsc: kts: diamond holesaw Power-Change, Diamond for Hard Ceramics 64 mm kpn: DIAMANTGATZAAG 64MM CERAM.2608580314 kpn_dash: kpn_clear: DIAMANTGATZAAG64MMCERAM2608580314 bkpn: BOSCH DIAMANTGATZAAG 64MM CERAM.2608580314 bkpn_clear: BOSCH DIAMANTGATZAAG64MMCERAM2608580314 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Diamond drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch diamond drill bit sr_no_br_cl_ns: 2608580314 sr_ns: BOSCH2608580314
r: 08051925 p: 32.49 pid: 131587 b: BOSCH q: 0 st: lt: 5 ean: 4059952536095 sr: BOSCH 2608900463 sr_no_br: 2608900463 sr_no_br_cl: 2608900463 sr_cl: BOSCH2608900463 sr_dash: sold: 97.47 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: av: Diameter (hole saw) 51 mm Connection type Power Change Product Range Bosch Expert n: BOSCH GATZAAG HM 51MM POWER 2608900463 EXPE holesaw Expert Construction Material 51x60 mm - 2608900463 cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product Description EXPERT Power-Change holesaw Construction Material 51mm Lasts up to 50x longer in demanding materials than Bosch 2609256D05 holesaws Exceptional durability thanks to Bosch Carbide Technology. For use with the tool-free Bosch Power Change Plus adapter: offers accuracy and robustness. Advantages Lasts up to 50x longer in demanding materials than Bosch 2609256D05 holesaws - Cutting holes in brick, soft tiles and plasterboard is essential for plumbers and electricians on a construction site or during renovation work. Few holesaws can handle tough construction materials, but with the EXPERT Construction Material, you'll get the job done. This hole saw does its job and lasts a long time. With just a few huge carbide teeth on its steel body, the EXPERT Construction Material always delivers a good hole. The large slots are optimised for fast chip removal. The drill goes quickly through everything from brick to wood and chipboard. Bosch Carbide Technology is an optimal mix of the hardest metals and ensures an extremely long lifetime. The Bosch EXPERT Construction Material hole saw is a robust saw that is very handy on the construction site and a great value for professionals because of its long service life. For use with the tool-free Bosch Power Change Plus adapter: offers accuracy and robustness. Long life when cutting holes in bricks and chipboardWith just a few huge carbide teeth on its steel body, the Expert Construction Material always delivers a good hole. The large slots are optimised for fast chip removal. The drill goes quickly through everything from brick to wood and chipboard. Bosch Carbide Technology is an optimal mix of the hardest metals and ensures an extremely long lifetime. For use with the tool-free Bosch Power Change Plus adapter: offers accuracy and robustness. ds: dsc: kts: holesaw Expert Construction Material 51x60 mm kpn: GATZAAG HM 51MM POWER 2608900463 EXPE kpn_dash: kpn_clear: GATZAAGHM51MMPOWER2608900463EXPE bkpn: BOSCH GATZAAG HM 51MM POWER 2608900463 EXPE bkpn_clear: BOSCH GATZAAGHM51MMPOWER2608900463EXPE c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch hole saw | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900463 sr_ns: BOSCH2608900463
r: 02963385 p: 97.12 pid: 132496 b: BOSCH q: 0 st: lt: 8 ean: 3165140957557 sr: BOSCH 2608644525 sr_no_br: 2608644525 sr_no_br_cl: 2608644525 sr_cl: BOSCH2608644525 sr_dash: sold: 97.12 p_range: none type: standard act: 1 avo: av: Saw blade diameter 254 mm Bore size 30 mm Number of teeth 40 Kerf width 2,1 mm For material Wood Mounting (saw blade/cutter) Round n: BOSCH CIRKELZAAGB.254X2,1X30 HOUT 260864452 circular saw blade E x pert for Wood for cordless saw table 254 x 30 x 2.1/1.6 mm, 40T - 2608644525 cn: CIRCULAR SAW BLADE cn2: CIRCULAR SAW BLADE cn_clear: CIRCULARSAWBLADE d: Product description Circular saw blade ACCU Expert for Wood 254x30x2.1/1.6x40T cordless saw table For maximum battery life Expert for Wood circular saw blade for maximum battery life of cordless saws Extra-thin kerf reduces energy consumption Advantages Maximum battery life - The Expert for Wood circular saw blade gets the longest battery life out of the cordless saw. The extra thin kerf and aggressive tooth angles reduce friction and material removal, enabling smooth, effortless cutting. The saw blade is up to 30% thinner than standard Expert saw blades, but retains superior blade life. The carbide MicroteQ teeth ensure high durability and superior performance in wood applications. Ideal for cutting all kinds of wood and wooden materials. The blade fits all commonly used cordless table saws. The Expert for Wood circular saw blade features MicroteQ teeth manufactured in-house by Bosch, consisting of extra-fine and durable carbide grit, ensuring superior lifetime. The saw blade's anti-corrosion ProteQtion coating reduces friction, prevents rust and ensures highly durable cutting performance. Bore works with or without reducing rings to fit different sizes. ds: dsc: kts: circular saw blade E x pert for Wood for cordless saw table 254 x 30 x 2.1/1.6 mm, 40T kpn: CIRKELZAAGB.254X2,1X30 HOUT 260864452 kpn_dash: kpn_clear: CIRKELZAAGB254X21X30HOUT260864452 bkpn: BOSCH CIRKELZAAGB.254X2,1X30 HOUT 260864452 bkpn_clear: BOSCH CIRKELZAAGB254X21X30HOUT260864452 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Circular saw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch circular saw blade sr_no_br_cl_ns: 2608644525 sr_ns: BOSCH2608644525
r: 08051959 p: 48.27 pid: 132890 b: BOSCH q: 0 st: lt: 8 ean: 4059952536439 sr: BOSCH 2608900497 sr_no_br: 2608900497 sr_no_br_cl: 2608900497 sr_cl: BOSCH2608900497 sr_dash: sold: 96.54 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: av: Diameter (hole saw) 32 mm Connection type Power Change Product Range Bosch Expert n: BOSCH GATZAAG HM 32MM POWER 2608900497 SHEE holesaw Expert Sheet Metal 32x5 mm - 2608900497 cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description EXPERT Power-Change holesaw Carbide Sheet Metal 32mm Lasts up to 50x longer in demanding materials than 2608580408 holesaws from Bosch Exceptional durability thanks to Bosch Carbide Technology. For use with the tool-free Bosch Power Change Plus adapter: offers accuracy and robustness. Advantages Lasts up to 50x longer in demanding materials than 2608580408 holesaws from Bosch - Drilling holes in sheet metal is not like other applications with a holesaw. In industrial environments or when working on vehicles, you need to be extremely precise. Also, the material is hard and destroys traditional bi-metal holesaws. The EXPERT Sheet Metal solves all these problems with one compact piece of high-quality engineering. The EXPERT Sheet Metal is made from a single cylinder of twisted metal for ultimate stability, robustness and accuracy. Its extreme durability and ability to cut the hardest steels is due to the carbide teeth, which are individually ground and brazed onto the body. This hole saw has the best features in its small size: it is durable, precise and optimised for high-quality sheet metal. For use with the tool-free Bosch Power Change Plus adapter: offers accuracy and robustness. Long life when cutting holes in stainless steelThe Expert Sheet Metal is made from a single cylinder of twisted metal for ultimate stability, robustness and accuracy. Its extreme durability and ability to cut the hardest steels is thanks to the carbide teeth, which are individually ground and brazed onto the body. For use with the tool-free Bosch Power Change Plus adapter: offers accuracy and robustness. ds: dsc: kts: holesaw Expert Sheet Metal 32x5 mm kpn: GATZAAG HM 32MM POWER 2608900497 SHEE kpn_dash: kpn_clear: GATZAAGHM32MMPOWER2608900497SHEE bkpn: BOSCH GATZAAG HM 32MM POWER 2608900497 SHEE bkpn_clear: BOSCH GATZAAGHM32MMPOWER2608900497SHEE c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch hole saw | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900497 sr_ns: BOSCH2608900497
r: 02222455 p: 32.06 pid: 132002 b: BOSCH q: 0 st: lt: 8 ean: 3165140148207 sr: BOSCH 2608597604 sr_no_br: 2608597604 sr_no_br_cl: 2608597604 sr_cl: BOSCH2608597604 sr_dash: sold: 96.18 p_range: none type: standard act: 1 avo: av: Diameter 20 mm Cutting length 90 mm Drill bit type Wood drill bit Overall length 90 mm Shank size 8 mm Shank type Cylindrical Material (drill bit) Carbide tip n: BOSCH SCHARNIERBOOR 20MM 2608597604 BOSCH artillery drill carbide 20 x 90 mm, d 8 mm - 2608597604 cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Artificial carbide drill bit 20 x 90 mm, d 8 mm Precise holes in abrasive materials The tungsten carbide hinge drill bit can be used to drill very precise holes in abrasive materials Gives fantastic results due to carbide cutting edges combined with diamond-ground tungsten Advantages For holes that are just big enough - The tungsten carbide hinge drill bit allows very precise holes to be drilled in abrasive materials. Its special characteristics make it ideal for joiners and carpenters, especially for the production of windows, doors and kitchens. Due to the carbide, with diamond-ground tungsten cutting edges, this drill produces the best results. In addition, the centring tip helps ensure an accurate drill point start, and the two main and side cutting edges shoot through the material, for highly accurate and splinter-free blind holes. Suitable for abrasive materials, such as hardwood, plywood, chipboard and fibreboard. This hinge drill has a cylindrical shank and is intended for use in portable drills and drill stands. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: artillery drill carbide 20 x 90 mm, d 8 mm kpn: SCHARNIERBOOR 20MM 2608597604 BOSCH kpn_dash: kpn_clear: SCHARNIERBOOR20MM2608597604BOSCH bkpn: BOSCH SCHARNIERBOOR 20MM 2608597604 BOSCH bkpn_clear: BOSCH SCHARNIERBOOR20MM2608597604BOSCH c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608597604 sr_ns: BOSCH2608597604
r: 02288505 p: 5.33 pid: 127985 b: BOSCH q: 0 st: lt: 8 ean: 3165140690317 sr: BOSCH 2608588140 sr_no_br: 2608588140 sr_no_br_cl: 2608588140 sr_cl: BOSCH2608588140 sr_dash: sold: 95.94 p_range: none type: standard act: 1 avo: av: Diameter 5 mm Cutting length 50 mm Drill bit type Concrete drill bit Overall length 100 mm Shank size 5 mm Shank type Cylindrical Material (drill bit) Carbide tip n: BOSCH BETONBOOR 5X100MM 2608588140 BOSCH concrete drill CYL-5, 5 x 50 x 100 mm - 2608588140 cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Concrete drill bit CYL-5, 5 x 50 x 100 mm Long service life for concrete and stone CYL-5 drill bit lasts a long time when drilling fixing holes in concrete and stone Bosch carbide mixture and diamond-ground cutting edges for a wear-resistant drill bit Advantages Extra long life - Drill bit CYL-5 lasts extra long when drilling in concrete and stone. The drill bit is extremely wear-resistant thanks to a combination of diamond-ground cutting edges and a carbide mixture developed by Bosch itself. Friction on the spiral through drilled material is significantly reduced thanks to a vario design with 2 spirals with a short, variable slope for good drill dust removal and less wear. The Bosch Power Grip Shank System ensures that power is fully transferred from machine to drill bit. This allows the full power of the machine to be used for drilling and the drill bit wears less quickly. For drilling fixing holes in concrete, natural and artificial stone. This drill fits cylinder shank systems for all corded or cordless drills. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that this drill bit is within close tolerances, drills very accurately and does not slip while drilling fixing holes. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: concrete drill CYL-5, 5 x 50 x 100 mm kpn: BETONBOOR 5X100MM 2608588140 BOSCH kpn_dash: kpn_clear: BETONBOOR5X100MM2608588140BOSCH bkpn: BOSCH BETONBOOR 5X100MM 2608588140 BOSCH bkpn_clear: BOSCH BETONBOOR5X100MM2608588140BOSCH c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608588140 sr_ns: BOSCH2608588140
r: 08051882 p: 31.91 pid: 131544 b: BOSCH q: 0 st: lt: 8 ean: 4059952535661 sr: BOSCH 2608900420 sr_no_br: 2608900420 sr_no_br_cl: 2608900420 sr_cl: BOSCH2608900420 sr_dash: sold: 95.73 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: av: Diameter (hole saw) 22 mm Connection type Power Change Product Range Bosch Expert n: BOSCH GATZAAG HM 22MM POWER 2608900420 TOUG holesaw Expert Tough Material 22x60 mm - 2608900420 cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description EXPERT Power-Change holesaw Tough Material 22mm Lasts up to 50x longer in demanding materials than 2608580419 holesaws from Bosch Exceptional durability thanks to Bosch Carbide Technology. For use with the tool-free Bosch Power Change Plus adapter: offers accuracy and robustness. Advantages Lasts up to 50x longer in demanding materials than Bosch's 2608580419 holesaws - Most holesaws for wood and metal seem to work fine, until you hit a hardened nail or screw. Then they scream, smoke and grind until their teeth are lost and you've only made half a hole. With its carbide teeth, the EXPERT Tough Material barely slows down when you hit metal. It cuts cleanly and keeps making holes relentlessly. Each tooth is made with Bosch Carbide Technology and therefore of optimum quality because of the carbide that is laser-welded and ground six times for the perfect shape. This makes the Bosch EXPERT Tough Material hole saw ideal for tough jobs and all-round skilled trades: Besides wood and metal, it is a good hole saw for stainless steel, brick, soft tiles and reinforced plastics. The Bosch EXPERT Tough Material holesaw is a great all-rounder for any professional, and certainly not to be trifled with. For use with the tool-free Bosch Power Change Plus adapter: offers accuracy and robustness. Long life when cutting holes in various materialsEvery tooth is made with Bosch Carbide Technology and therefore of optimum quality because of the carbide that is laser-welded and ground six times for the perfect shape. This makes the Bosch Expert Tough Material hole saw ideal for tough jobs and all-round craftsmanship: Besides wood and metal, it is a good hole saw for stainless steel, brick, soft tiles and reinforced plastics. For use with the tool-free Bosch Power Change Plus adapter: offers accuracy and robustness. ds: dsc: kts: holesaw Expert Tough Material 22x60 mm kpn: GATZAAG HM 22MM POWER 2608900420 TOUG kpn_dash: kpn_clear: GATZAAGHM22MMPOWER2608900420TOUG bkpn: BOSCH GATZAAG HM 22MM POWER 2608900420 TOUG bkpn_clear: BOSCH GATZAAGHM22MMPOWER2608900420TOUG c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch hole saw | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900420 sr_ns: BOSCH2608900420
r: 02964062 p: 95.59 pid: 3430 b: BOSCH q: 0 st: lt: 8 ean: 3165140954020 sr: BOSCH 2608578964 sr_no_br: 2608578964 sr_no_br_cl: 2608578964 sr_cl: BOSCH2608578964 sr_dash: sold: 95.59 p_range: none type: standard act: 1 avo: av: Diameter 15 mm Cutting length 250 mm Drill bit type Hammer drill bit Overall length 380 mm Shank type SDS-plus n: BOSCH 2608578964 hollow drill SDS-Plus-9 SpeedClean 15 x 250 x 380 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description: Hollow drill bit SDS-plus-9 SpeedClean 15 x 250 x 380 mm Dust-free drilling in masonry, concrete and reinforced concrete Dust-free drilling with the SDS-plus-9 Speed Clean drill bit Drain holes for optimum removal of drilling dust and grit and clean working environment without additional handling Advantages: Dust-free drilling - The drill bit SDS plus-9 Speed Clean enables dust-free drilling. During drilling, the dust is extracted by the built-in vacuum section through the extraction holes, ensuring optimum removal of drilling dust and grit without additional work. This technique ensures a clean and dust-free working environment. The drill bit is suitable for drilling in masonry, concrete and reinforced concrete. This drill fits drill hammers with an SDS plus shank and works in combination with professional M-class hoovers. The SDS plus-9 Speed Clean drill bit is available with 4 cutters for larger diameters and with 2 cutters for smaller diameters and has an accurate centring point. The wear indicator shows whether the hole diameter is within the tolerances to fit a metal anchor, which is good for accuracy. Made in Germany. Fits all SDS plus rotary hammers. ds: dsc: kts: hollow drill SDS-Plus-9 SpeedClean 15 x 250 x 380 mm kpn: 2608578964 kpn_dash: kpn_clear: 2608578964 bkpn: BOSCH 2608578964 bkpn_clear: BOSCH 2608578964 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608578964 sr_ns: BOSCH2608578964
r: 02221626 p: 4.74 pid: 131691 b: BOSCH q: 0 st: lt: 4 ean: 3165140520867 sr: BOSCH 2608585851 sr_no_br: 2608585851 sr_no_br_cl: 2608585851 sr_cl: BOSCH2608585851 sr_dash: sold: 94.8 p_range: none type: standard act: 1 avo: av: Diameter 5 mm Cutting length 52 mm Drill bit type Metal drill bit Overall length 86 mm Shank size 5 mm Shank type Cylindrical Material (drill bit) HSS-E Co 5% Standard DIN 338 n: BOSCH METAALBOOR HSS-CO 5X86MM 2608585851 B metal drill bit HSS-Co, DIN 338, 5 x 52 x 86 mm - 2608585851 cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-Co, DIN 338, 5 x 52 x 86 mm Long service life when drilling in stainless steel HSS spiral drill cobalt lasts a long time when drilling in stainless steel. Cobalt alloy and fully ground HSS ensure wear resistance and heat resistance Advantages Long service life - The HSS spiral drill cobalt lasts a long time when drilling in stainless steel. This longer life is due to the steel alloy containing 5% cobalt and the fully ground HSS (High-Speed Steel), which offers excellent surface quality, wear resistance and heat resistance. Thanks to two cutting edges and two grooves, chips are quickly removed, making the drill bit last even longer. This drill is suitable for alloyed and unalloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steel. This drill bit is suitable for alloyed and unalloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steel. The drill has a cylindrical shank (drill bit and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS cobalt spiral drill bit is produced in accordance with DIN 338. The drill bit is type N (groove angle) with a tip of 135 degrees and a diameter tolerance of h8. The pointed split point ensures active cutting action and perfect centring without running. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-Co, DIN 338, 5 x 52 x 86 mm kpn: METAALBOOR HSS-CO 5X86MM 2608585851 B kpn_dash: METAALBOOR HSS kpn_clear: METAALBOORHSSCO5X86MM2608585851B bkpn: BOSCH METAALBOOR HSS-CO 5X86MM 2608585851 B bkpn_clear: BOSCH METAALBOORHSSCO5X86MM2608585851B c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608585851 sr_ns: BOSCH2608585851
r: 08051847 p: 23.69 pid: 138511 b: BOSCH q: 0 st: lt: 8 ean: 4059952534756 sr: BOSCH 2608900385 sr_no_br: 2608900385 sr_no_br_cl: 2608900385 sr_cl: BOSCH2608900385 sr_dash: sold: 94.76 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: av: Length 150 mm For material Wood with nails Number of teeth per inch 6 Product Range Bosch Expert n: BOSCH RECIPROZAAGBL.S956DHM RAAM 2608900385 Expert reciprocating saw blade Window Demolition - 2608900385 cn: RECIPROCATING SAW BLADE cn2: RECIPROCATING SAW BLADE cn_clear: RECIPROCATINGSAWBLADE d: Product description EXPERT Reciprocating saw blade S956DHM Window Demolition Lasts up to 50x longer in demanding materials than Bosch's S611DF saw blade Exceptional durability thanks to Bosch Carbide Technology. Fits all reciprocating saws with S-shank. Advantages Lasts up to 50x longer in demanding materials than Bosch's S611DF saw blade - Cutting out windows for replacement or demolition was already a tough job when it came to cutting multiple materials, such as steel-reinforced wood or plastic. Now that window fixing screws are made of high-tensile steel, the old bi-metal saw blades no longer get through any screws. The Bosch EXPERT 'Window Demolition' reciprocating saw blade is up to modern windows. The teeth made with Bosch Carbide Technology cut through the strongest fastening screws, and then cut through just as well. The short, tapered tip and set carbide teeth are designed for this specific task: this is our saw blade especially for windows and doors, whether they are made of wood, plastic or composite. With its long life, efficiency and ability to demolish windows or doors, the Bosch EXPERT 'Window Demolition' reciprocating saw blade is a firm favourite with professionals who install windows. It even withstands contact with masonry, mortar and plaster. Fits all reciprocating saws with S-shank. Long life when cutting window frames of any materialThe Bosch Expert 'Window Demolition' reciprocating saw blade is up to modern windows. The teeth made with Bosch Carbide Technology cut through the strongest fastening screws, and then cut just as well. The short, tapered tip and set carbide teeth are designed for this specific task: this is our saw blade especially for windows and doors, whether they are made of wood, plastic or composite. Fits all S-shank reciprocating saws, also known as reciprocating or demolition saws. ds: dsc: kts: Expert reciprocating saw blade Window Demolition kpn: RECIPROZAAGBL.S956DHM RAAM 2608900385 kpn_dash: kpn_clear: RECIPROZAAGBLS956DHMRAAM2608900385 bkpn: BOSCH RECIPROZAAGBL.S956DHM RAAM 2608900385 bkpn_clear: BOSCH RECIPROZAAGBLS956DHMRAAM2608900385 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Reciprocating saw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch reciprocating saw blade | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900385 sr_ns: BOSCH2608900385
