- Width: 130 mm
- Length: 290 mm
- Shank type: SDS-plus
Bosch filing, grating and scraping
Bosch SDS floor scrapers and wood rasps put a rotary hammer, a demolition hammer or a drill to work removing floor coverings and shaping wood.
Choose a floor scraper by the mount of your hammer. With PRO SDS Plus the scrapers are 130 mm wide, for glue residue, tile adhesive and thin layers on smaller areas. With PRO SDS Max and with a PRO HEX 28 or PRO HEX 30 hexagonal mount, the width goes up to 152 mm and the length to 510 or 635 mm, for heavy hammers stripping large floors. For the SDS Max scraper there is a replacement set including bolts and nuts, so you replace the blade instead of the whole scraper.
The wood rasps fit in a drill. Pick the shape by the profile: round, conical, cylindrical or cylindrical concave, with diameters from 13 to 15 mm and working lengths up to 65 mm. A combined wood rasp and file shapes wood in two stages. For finer finishing after rasping, Bosch abrasives: sanding nets, fibre discs and wire brushes sit in the same surface treatment range.
- Width: 152 mm
- Length: 635 mm
- Shank type: SDS-max
- Width: 130 mm
- Shank type: SDS-plus
- Diameter: 14 mm
- Shank size: 6 mm
- Width: 152 mm
- Shank type: SDS-max
- Diameter: 16 mm
- Shank size: 6 mm
- Width: 152 mm
- Length: 510 mm
- Shank size: 30 mm
- Width: 152 mm
- Length: 510 mm
- Shank size: 28 mm
- Diameter: 15 mm
- Effective length: 15 mm
- Shank size: 6 mm
- Diameter: 15 mm
- Effective length: 35 mm
- Shank size: 6 mm
- Diameter: 15 mm
- Effective length: 30 mm
- Shank size: 6 mm
- Diameter: 13 mm
- Effective length: 35 mm
- Shank size: 6 mm
- Diameter: 15 mm
- Effective length: 30 mm
- Shank size: 6 mm