r: 02220312 p: 10.6 pid: 129870 b: BOSCH q: 0 st: lt: 8 ean: 3165140046312 sr: BOSCH 1618596316 sr_no_br: 1618596316 sr_no_br_cl: 1618596316 sr_cl: BOSCH1618596316 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 11 mm Cutting length 150 mm Drill bit type Hammer drill bit Overall length 215 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 1618596316 hammer drill SDS-Plus-5, 11 x 150 x 215 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 11 x 150 x 215 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Benefits Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 11 x 150 x 215 mm kpn: 1618596316 kpn_dash: kpn_clear: 1618596316 bkpn: BOSCH 1618596316 bkpn_clear: BOSCH 1618596316 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 1618596316 sr_ns: BOSCH1618596316
r: 02221538 p: 10.58 pid: 134281 b: BOSCH q: 0 st: lt: 8 ean: 3165140483384 sr: BOSCH 2608585604 sr_no_br: 2608585604 sr_no_br_cl: 2608585604 sr_cl: BOSCH2608585604 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 8,5 mm Cutting length 100 mm Drill bit type Hammer drill bit Overall length 165 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 2608585604 hammer drill SDS-Plus-5, 8.5 x 100 x 165 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 8.5 x 100 x 165 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill bit features spirals and notches that make it easier for the drill bit to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 8.5 x 100 x 165 mm kpn: 2608585604 kpn_dash: kpn_clear: 2608585604 bkpn: BOSCH 2608585604 bkpn_clear: BOSCH 2608585604 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608585604 sr_ns: BOSCH2608585604
r: 01049200 p: 10.42 pid: 128813 b: BOSCH q: 0 st: lt: 8 ean: 3165140189118 sr: BOSCH 2608597779 sr_no_br: 2608597779 sr_no_br_cl: 2608597779 sr_cl: BOSCH2608597779 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 6,5 mm Cutting length 200 mm Drill bit type Hammer drill bit Overall length 265 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 2608597779 hammer drill SDS-Plus-5, 6.5 x 200 x 265 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 6.5 x 200 x 265 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill bit features spirals and notches that make it easier for the drill bit to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 6.5 x 200 x 265 mm kpn: 2608597779 kpn_dash: kpn_clear: 2608597779 bkpn: BOSCH 2608597779 bkpn_clear: BOSCH 2608597779 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608597779 sr_ns: BOSCH2608597779
r: 02881994 p: 10.34 pid: 140647 b: BOSCH q: 0 st: lt: 10 ean: 3165140908139 sr: BOSCH 2608577304 sr_no_br: 2608577304 sr_no_br_cl: 2608577304 sr_cl: BOSCH2608577304 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Diameter 13 mm Material (drill bit) HSS Cutting length 101 mm Standard DIN 338 Number of cutting edges 2 ea Shank type Cylindrical - tapered Shank size 13 Overall length 151 mm Drill bit type Metal drill bit n: BOSCH 2608577304 HSS spiral drill PointTeQ with reduced shank 13.0 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Spiral drill bit HSS PointTeQ 13 mm reduced take-up shank Fast drilling in metal The HSS spiral drill PointTeQ offers fast drilling in metal thanks to the PointTeQ tip The self-centring tip prevents drift, enabling quick and easy drilling starts Advantages Fast drilling in metal - The HSS spiral drill PointTeQ offers fast drilling in metal thanks to the PointTeQ tip. Fast and easy drill start thanks to the self-centring tip that prevents drift. Higher drilling speed reduces the risk of heating and wear. The PointTeQ tip stays sharp. This guarantees excellent durability. The drill bit is suitable for drilling through-holes and centring holes in alloyed and unalloyed steel, non-ferrous metals, cast iron and plastic. Has a cylindrical shank and is intended for use in drill stands and drill/screw machines. The risk of breaking is low, especially for drill bits with a diameter of less than 6 mm, as the drill bit is built very elastically. The black oxide-coated spiral allows fast chip removal. The HSS PointTeQ spiral drill bit is manufactured in accordance with DIN 338. The drill bit is type N (spiral angle) with tip of 135 degrees. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: HSS spiral drill PointTeQ with reduced shank 13.0 mm kpn: 2608577304 kpn_dash: kpn_clear: 2608577304 bkpn: BOSCH 2608577304 bkpn_clear: BOSCH 2608577304 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577304 sr_ns: BOSCH2608577304
r: 02221713 p: 10.29 pid: 133146 b: BOSCH q: 0 st: lt: 8 ean: 3165140521734 sr: BOSCH 2608585938 sr_no_br: 2608585938 sr_no_br_cl: 2608585938 sr_cl: BOSCH2608585938 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Diameter 11 mm Cutting length 94 mm Drill bit type Metal drill bit Overall length 142 mm Shank size 11 mm Shank type Cylindrical Material (drill bit) HSS-G Standard DIN 338 n: BOSCH 2608585938 metal drill bit HSS-G, DIN 338, 11 x 94 x 142 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-G, DIN 338, 11 x 94 x 142 mm Drilling with high precision HSS spiral drill bit offers full drilling functionality for standard use on metal Self-centring, 135-degree split tip combines active cutting action with perfect centring without drift Advantages Maximum precision - The HSS spiral drill ground provides maximum precision when drilling into metal. The self-centring 135-degree split point combines active cutting action with perfect centring without running, delivering maximum precision. The split tip makes pre-punching or pre-drilling up to 10 mm unnecessary. This precision ground HSS (High-Speed Steel) drill bit offers up to 40% higher drilling speed and up to 50% lower feed pressure than standard ground HSS drills with chisel edges. This drill bit is designed for drilling holes in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, temper cast iron, non-ferrous metals and hard plastics. The drill has a cylindrical shank (drill bit and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS spiral drill ground is produced in accordance with DIN 338. The drill bit is type N (groove angle) with a tip of 135 degrees and a diameter tolerance of h8. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-G, DIN 338, 11 x 94 x 142 mm kpn: 2608585938 kpn_dash: kpn_clear: 2608585938 bkpn: BOSCH 2608585938 bkpn_clear: BOSCH 2608585938 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608585938 sr_ns: BOSCH2608585938
r: 02224821 p: 10.28 pid: 127628 b: BOSCH q: 0 st: lt: 8 ean: 3165140599245 sr: BOSCH 2608587163 sr_no_br: 2608587163 sr_no_br_cl: 2608587163 sr_cl: BOSCH2608587163 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Diameter 7 mm Cutting length 80 mm Drill bit type Tile drill bit Overall length 80 mm Shank size 7 mm Shank type Cylindrical Material (drill bit) Carbide tip n: BOSCH 2608587163 CYL-9 SoftCeramic tile drill bit, 7 x 80 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Tile drill bit CYL-9 SoftCeramic, 7 x 80 mm Standard for drilling into tiles CYL-9 SoftCeramic tile drill bit is the standard drill bit for drilling into tiles Dry drilling without lubrication for easy use Advantages Standard for drilling into tiles - The CYL-9 SoftCeramic tile drill bit is the standard drill bit for drilling into tiles. Dry drilling without lubrication is possible, making drilling with this drill bit effortless and comfortable. The drill has 1 single spiral and is especially suitable for drilling in soft to medium-hard tiles. This drill fits corded or cordless drills with a cylinder shaft system. Drill without impact at low speeds. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: CYL-9 SoftCeramic tile drill bit, 7 x 80 mm kpn: 2608587163 kpn_dash: kpn_clear: 2608587163 bkpn: BOSCH 2608587163 bkpn_clear: BOSCH 2608587163 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608587163 sr_ns: BOSCH2608587163
r: 02791397 p: 9.93 pid: 134616 b: BOSCH q: 0 st: lt: 8 ean: 3165140690379 sr: BOSCH 2608588146 sr_no_br: 2608588146 sr_no_br_cl: 2608588146 sr_cl: BOSCH2608588146 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 6 mm Cutting length 200 mm Drill bit type Concrete drill bit Overall length 250 mm Shank size 6 mm Shank type Cylindrical Material (drill bit) Carbide tip n: BOSCH 2608588146 concrete drill CYL-5, 6 x 200 x 250 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Concrete drill bit CYL-5, 6 x 200 x 250 mm Long service life in concrete and stone CYL-5 drill bit lasts a long time when drilling fixing holes in concrete and stone Bosch carbide mixture and diamond-ground cutting edges for a wear-resistant drill bit Advantages Extra long life - Drill bit CYL-5 lasts extra long when drilling in concrete and stone. The drill bit is extremely wear-resistant thanks to a combination of diamond-ground cutting edges and a carbide mixture developed by Bosch itself. Friction on the spiral through drilled material is significantly reduced thanks to a vario design with 2 spirals with a short, variable slope for good drill dust removal and less wear. The Bosch Power Grip Shank System ensures that power is fully transferred from machine to drill bit. This allows the full power of the machine to be used for drilling and the drill bit wears less quickly. For drilling fixing holes in concrete, natural and artificial stone. This drill fits cylinder shank systems for all corded or cordless drills. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that this drill bit is within close tolerances, drills very accurately and does not slip while drilling fixing holes. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: concrete drill CYL-5, 6 x 200 x 250 mm kpn: 2608588146 kpn_dash: kpn_clear: 2608588146 bkpn: BOSCH 2608588146 bkpn_clear: BOSCH 2608588146 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608588146 sr_ns: BOSCH2608588146
r: 02894782 p: 9.7 pid: 132338 b: BOSCH q: 0 st: lt: 8 ean: 3165140908122 sr: BOSCH 2608577303 sr_no_br: 2608577303 sr_no_br_cl: 2608577303 sr_cl: BOSCH2608577303 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 12,5 mm Cutting length 101 mm Drill bit type Metal drill bit Overall length 151 mm Shank size 12,5 Shank type Cylindrical - tapered Material (drill bit) HSS Standard DIN 338 n: BOSCH 2608577303 HSS twist drill PointTeQ with reduced shank 12.5 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Spiral drill bit HSS PointTeQ 12.5 mm reduced take-up shank Fast drilling in metal The HSS spiral drill PointTeQ offers fast drilling in metal thanks to the PointTeQ tip The self-centring tip prevents drift, enabling quick and easy drilling starts Advantages Fast drilling in metal - The HSS spiral drill PointTeQ offers fast drilling in metal thanks to the PointTeQ tip. Fast and easy drill start thanks to the self-centring tip that prevents drift. Higher drilling speed reduces the risk of heating and wear. The PointTeQ tip stays sharp. This guarantees excellent durability. The drill bit is suitable for drilling through-holes and centring holes in alloyed and unalloyed steel, non-ferrous metals, cast iron and plastic. Has a cylindrical shank and is intended for use in drill stands and drill/screw machines. The risk of breaking is low, especially for drill bits with a diameter of less than 6 mm, as the drill bit is built very elastically. The black oxide-coated spiral allows fast chip removal. The HSS PointTeQ spiral drill bit is manufactured in accordance with DIN 338. The drill bit is of type N (spiral angle) with tip of 135 degrees. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: HSS twist drill PointTeQ with reduced shank 12.5 mm kpn: 2608577303 kpn_dash: kpn_clear: 2608577303 bkpn: BOSCH 2608577303 bkpn_clear: BOSCH 2608577303 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577303 sr_ns: BOSCH2608577303
r: 02790073 p: 9.61 pid: 136039 b: BOSCH q: 0 st: lt: 8 ean: 3165140872164 sr: BOSCH 2608577129 sr_no_br: 2608577129 sr_no_br_cl: 2608577129 sr_cl: BOSCH2608577129 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 8,5 mm Cutting length 75 mm Drill bit type Metal drill bit Overall length 117 mm Shank size 1/4 inch Shank type Hex Material (drill bit) HSS n: BOSCH 2608577129 twist drill bit HSS hex shank 8.5 x 75 x 117 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Spiral drill bit HSS hex shank 8.5 x 75 x 117 mm Very robust with impact screwdrivers Extremely robust Impact Control HSS spiral drill for drilling in metal, especially with impact screwdrivers The super-strong body is extremely robust Advantages Extremely robust - The very robust Impact Control HSS spiral drill bit is suitable for drilling in metal, especially with impact screwdrivers. The very strong body is exceptionally robust. The spiral drill is precision ground from solid metal and fitted with an oxide-coated groove. This gives the drill an excellent surface quality for low-wear drilling into materials. Suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, metal sheets and plastics. This drill bit is suitable for drive systems for 1/4-inch hex shafts, for universal use with drill/screwdrivers, impact screwdrivers and drill stands. Hex shank for maximum power transfer in standard three-claw drill chucks and drill/screwdriver holders. ds: dsc: kts: twist drill bit HSS hex shank 8.5 x 75 x 117 mm kpn: 2608577129 kpn_dash: kpn_clear: 2608577129 bkpn: BOSCH 2608577129 bkpn_clear: BOSCH 2608577129 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577129 sr_ns: BOSCH2608577129
r: 02790043 p: 9.46 pid: 136842 b: BOSCH q: 0 st: lt: 8 ean: 3165140858892 sr: BOSCH 2608577061 sr_no_br: 2608577061 sr_no_br_cl: 2608577061 sr_cl: BOSCH2608577061 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 8 mm Cutting length 69 mm Drill bit type Metal drill bit Overall length 109 mm Shank size 1/4 inch Shank type Hex Material (drill bit) HSS n: BOSCH 2608577061 twist drill bit HSS hex shank 8 x 75 x 117 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Spiral drill bit HSS hex shank 8 x 75 x 117 mm Very robust with impact screwdrivers Extremely robust Impact Control HSS spiral drill for drilling in metal, especially with impact screwdrivers The super-strong body is extremely robust Advantages Extremely robust - The very robust Impact Control HSS spiral drill bit is suitable for drilling in metal, especially with impact screwdrivers. The very strong body is exceptionally robust. The spiral drill is precision ground from solid metal and fitted with an oxide-coated groove. This gives the drill an excellent surface quality for low-wear drilling into materials. Suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, metal sheets and plastics. This drill bit is suitable for drive systems for 1/4-inch hex shafts, for universal use with drill/screwdrivers, impact screwdrivers and drill stands. Hex shank for maximum power transfer in standard three-claw drill chucks and drill/screwdriver holders. ds: dsc: kts: twist drill bit HSS hex shank 8 x 75 x 117 mm kpn: 2608577061 kpn_dash: kpn_clear: 2608577061 bkpn: BOSCH 2608577061 bkpn_clear: BOSCH 2608577061 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577061 sr_ns: BOSCH2608577061
r: 02894498 p: 9.37 pid: 132537 b: BOSCH q: 0 st: lt: 8 ean: 3165140906869 sr: BOSCH 2608577177 sr_no_br: 2608577177 sr_no_br_cl: 2608577177 sr_cl: BOSCH2608577177 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 13 mm Cutting length 101 mm Drill bit type Metal drill bit Overall length 151 mm Shank size 13 mm Shank type Cylindrical Material (drill bit) HSS Standard DIN 338 n: BOSCH 2608577177 twist drill bit HSS PointTeQ 13 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Spiral drill bit HSS PointTeQ 13 mm Fast drilling in metal The HSS spiral drill PointTeQ offers fast drilling in metal thanks to the PointTeQ tip The self-centring tip prevents drift, enabling fast and easy drilling starts Advantages Fast drilling in metal - The HSS spiral drill PointTeQ offers fast drilling in metal thanks to the PointTeQ tip. Fast and easy drill start thanks to the self-centring tip that prevents drift. Higher drilling speed reduces the risk of heating and wear. The PointTeQ tip stays sharp. This guarantees excellent durability. The drill bit is suitable for drilling through-holes and centring holes in alloyed and unalloyed steel, non-ferrous metals, cast iron and plastic. Has a cylindrical shank and is intended for use in drill stands and drill/screw machines. The risk of breaking is low, especially for drill bits with a diameter of less than 6 mm, as the drill bit is built very elastically. The black oxide-coated spiral allows fast chip removal. The HSS PointTeQ spiral drill bit is manufactured in accordance with DIN 338. The drill bit is type N (spiral angle) with tip of 135 degrees. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: twist drill bit HSS PointTeQ 13 mm kpn: 2608577177 kpn_dash: kpn_clear: 2608577177 bkpn: BOSCH 2608577177 bkpn_clear: BOSCH 2608577177 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577177 sr_ns: BOSCH2608577177
r: 01049223 p: 9.36 pid: 130323 b: BOSCH q: 0 st: lt: 8 ean: 3165140189101 sr: BOSCH 2608597778 sr_no_br: 2608597778 sr_no_br_cl: 2608597778 sr_cl: BOSCH2608597778 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 6,5 mm Cutting length 150 mm Drill bit type Hammer drill bit Overall length 215 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 2608597778 hammer drill SDS-Plus-5, 6.5 x 150 x 215 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 6.5 x 150 x 215 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Toothed carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making it less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 6.5 x 150 x 215 mm kpn: 2608597778 kpn_dash: kpn_clear: 2608597778 bkpn: BOSCH 2608597778 bkpn_clear: BOSCH 2608597778 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608597778 sr_ns: BOSCH2608597778
r: 02224820 p: 9.21 pid: 127625 b: BOSCH q: 0 st: lt: 8 ean: 3165140599238 sr: BOSCH 2608587162 sr_no_br: 2608587162 sr_no_br_cl: 2608587162 sr_cl: BOSCH2608587162 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Diameter 6,5 mm Cutting length 80 mm Drill bit type Tile drill bit Overall length 80 mm Shank size 6,5 mm Shank type Cylindrical Material (drill bit) Carbide tip n: BOSCH 2608587162 CYL-9 SoftCeramic tile drill bit, 6.5 x 80 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Tile drill bit CYL-9 SoftCeramic, 6.5 x 80 mm Standard for drilling into tiles CYL-9 SoftCeramic tile drill bit is the standard drill bit for drilling into tiles Dry drilling without lubrication for easy use Advantages Standard for drilling into tiles - The CYL-9 SoftCeramic tile drill bit is the standard drill bit for drilling into tiles. Dry drilling without lubrication is possible, making drilling with this drill bit effortless and comfortable. The drill has 1 single spiral and is especially suitable for drilling in soft to medium-hard tiles. This drill fits corded or cordless drills with a cylinder shaft system. Drill without impact at low speeds. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: CYL-9 SoftCeramic tile drill bit, 6.5 x 80 mm kpn: 2608587162 kpn_dash: kpn_clear: 2608587162 bkpn: BOSCH 2608587162 bkpn_clear: BOSCH 2608587162 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608587162 sr_ns: BOSCH2608587162
r: 01049060 p: 9.18 pid: 131507 b: BOSCH q: 0 st: lt: 8 ean: 3165140060820 sr: BOSCH 2608596686 sr_no_br: 2608596686 sr_no_br_cl: 2608596686 sr_cl: BOSCH2608596686 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Diameter 3,5 mm Drill bit type Metal drill bit Overall length 70 mm Shank size 3,5 mm Shank type Cylindrical Material (drill bit) HSS Surface treatment (drill bit) TiN Standard DIN 338 Cutting length 39 mm n: BOSCH 2608596686 metal drill bit HSS-TiN, DIN 338, 3.5 x 39 x 70 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-TiN, DIN 338, 3.5 x 39 x 70 mm Maximum service life HSS spiral drill bit TiN-coated offers longer service life Titanium nitride coating ensures very low friction and minimal wear Advantages Maximum service life - The HSS spiral drill bit TiN-coated offers maximum service life when drilling in metal. When using the right cooling system, the drill bit has very low friction and minimal wear thanks to the TiN-coating. Thanks to the high surface quality of this ground spiral drill made of HSS (High-Speed Steel), the drill bit can be used for long periods of time. Suitable for alloyed and unalloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics, such as Plexiglas. This drill has a cylindrical shank (drill and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS spiral drill bit TiN-coated is produced in accordance with DIN 338. The drill bit is type N (spiral angle) with a tip of 135 degrees and a diameter tolerance of h8. The pointed split point ensures an active cutting action and perfect centring without expiring. Do not use in aluminium and only with a coolant. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-TiN, DIN 338, 3.5 x 39 x 70 mm kpn: 2608596686 kpn_dash: kpn_clear: 2608596686 bkpn: BOSCH 2608596686 bkpn_clear: BOSCH 2608596686 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608596686 sr_ns: BOSCH2608596686
r: 01049230 p: 9.14 pid: 130327 b: BOSCH q: 0 st: lt: 8 ean: 3165140027878 sr: BOSCH 1618596179 sr_no_br: 1618596179 sr_no_br_cl: 1618596179 sr_cl: BOSCH1618596179 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 11 mm Cutting length 100 mm Drill bit type Hammer drill bit Overall length 165 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 1618596179 hammer drill SDS-Plus-5, 11 x 100 x 165 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 11 x 100 x 165 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 11 x 100 x 165 mm kpn: 1618596179 kpn_dash: kpn_clear: 1618596179 bkpn: BOSCH 1618596179 bkpn_clear: BOSCH 1618596179 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 1618596179 sr_ns: BOSCH1618596179
r: 02873986 p: 9.11 pid: 139299 b: BOSCH q: 0 st: lt: 8 ean: 3165140908115 sr: BOSCH 2608577302 sr_no_br: 2608577302 sr_no_br_cl: 2608577302 sr_cl: BOSCH2608577302 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 12 mm Cutting length 101 mm Drill bit type Metal drill bit Shank size 12 Shank type Cylindrical - tapered Material (drill bit) HSS Standard DIN 338 n: BOSCH 2608577302 HSS twist drill PointTeQ with reduced shank 12.0 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Spiral drill bit HSS PointTeQ 12 mm reduced take-up shank Fast drilling in metal The HSS spiral drill PointTeQ offers fast drilling in metal thanks to the PointTeQ tip The self-centring tip prevents drift, enabling quick and easy drilling starts Advantages Fast drilling in metal - The HSS spiral drill PointTeQ offers fast drilling in metal thanks to the PointTeQ tip. Fast and easy drill start thanks to the self-centring tip that prevents drift. Higher drilling speed reduces the risk of heating and wear. The PointTeQ tip stays sharp. This guarantees excellent durability. The drill bit is suitable for drilling through-holes and centring holes in alloyed and unalloyed steel, non-ferrous metals, cast iron and plastic. Has a cylindrical shank and is intended for use in drill stands and drill/screw machines. The risk of breaking is low, especially for drill bits with a diameter of less than 6 mm, as the drill bit is built very elastically. The black oxide-coated spiral allows fast chip removal. The HSS PointTeQ spiral drill bit is manufactured in accordance with DIN 338. The drill bit is type N (spiral angle) with tip of 135 degrees. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: HSS twist drill PointTeQ with reduced shank 12.0 mm kpn: 2608577302 kpn_dash: kpn_clear: 2608577302 bkpn: BOSCH 2608577302 bkpn_clear: BOSCH 2608577302 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577302 sr_ns: BOSCH2608577302
r: 03059909 p: 9.05 pid: 132712 b: BOSCH q: 0 st: lt: 8 ean: 6949509231529 sr: BOSCH 2608577537 sr_no_br: 2608577537 sr_no_br_cl: 2608577537 sr_cl: BOSCH2608577537 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 10 mm Cutting length 87 mm Drill bit type Metal drill bit Overall length 133 mm Shank size 1/4 inch Shank type Hex Material (drill bit) HSS Standard DIN 338 n: BOSCH 2608577537 metal drill bit HSS PointTeQ 10.0mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS PointTeQ 10.0mm Fast drilling in metal The HSS PointTeQ twist drill bit with hex shank is ideal for fast drilling in metal When drilling at high speeds, there is less heat build-up and wear on the drill bit. The PointTeQ tip ensures lasting sharpness and durability Advantages Fast drilling in metal - The HSS PointTeQ spiral drill bit with hex shank drills quickly in metal. This drill bit is designed for high-speed drilling, which minimises heating and wear on the drill bit. The PointTeQ design of the tip ensures lasting sharpness and high durability. The self-centring tip prevents drift and enables quick and easy drill start. The spiral with a black oxide coating ensures fast chip removal. The drill's hexagonal shank ensures stability and firm locking of the drill bit in the chuck, making it extra reliable. The shank strengthens the body of the drill bit and reduces the risk of breakage when drilling with a diameter smaller than 6 mm. The drill bit is compatible with 1/4-inch hex shank systems for universal use with impact screwdrivers, drill/drivers and drill stands. The four-surface tip of the HSS PointTeQ spiral drill bit enables active drilling and perfect centring. Type N (spiral angle) drill bit with 135° tip in accordance with DIN 338. Hexagonal shank for maximum power transfer in standard three-claw drill chucks and drill/screw machine holders. ds: dsc: kts: metal drill bit HSS PointTeQ 10.0mm kpn: 2608577537 kpn_dash: kpn_clear: 2608577537 bkpn: BOSCH 2608577537 bkpn_clear: BOSCH 2608577537 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577537 sr_ns: BOSCH2608577537
r: 02224818 p: 9.05 pid: 130289 b: BOSCH q: 0 st: lt: 8 ean: 3165140599214 sr: BOSCH 2608587160 sr_no_br: 2608587160 sr_no_br_cl: 2608587160 sr_cl: BOSCH2608587160 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Diameter 5,5 mm Cutting length 70 mm Drill bit type Tile drill bit Overall length 70 mm Shank size 5,5 mm Shank type Cylindrical Material (drill bit) Carbide tip n: BOSCH 2608587160 CYL-9 SoftCeramic tile drill bit, 5.5 x 70 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Tile drill bit CYL-9 SoftCeramic, 5.5 x 70 mm Standard for drilling into tiles CYL-9 SoftCeramic tile drill bit is the standard drill bit for drilling into tiles Dry drilling without lubrication for easy use Advantages Standard for drilling into tiles - The CYL-9 SoftCeramic tile drill bit is the standard drill bit for drilling into tiles. Dry drilling without lubrication is possible, making drilling with this drill bit effortless and comfortable. The drill has 1 single spiral and is especially suitable for drilling in soft to medium-hard tiles. This drill fits corded or cordless drills with a cylinder shaft system. Drill without impact at low speeds. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: CYL-9 SoftCeramic tile drill bit, 5.5 x 70 mm kpn: 2608587160 kpn_dash: kpn_clear: 2608587160 bkpn: BOSCH 2608587160 bkpn_clear: BOSCH 2608587160 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608587160 sr_ns: BOSCH2608587160
r: 02220298 p: 8.93 pid: 129145 b: BOSCH q: 0 st: lt: 8 ean: 3165140027830 sr: BOSCH 1618596175 sr_no_br: 1618596175 sr_no_br_cl: 1618596175 sr_cl: BOSCH1618596175 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 9 mm Cutting length 150 mm Drill bit type Hammer drill bit Overall length 215 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 1618596175 hammer drill SDS-Plus-5, 9 x 150 x 215 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 9 x 150 x 215 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Toothed carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 9 x 150 x 215 mm kpn: 1618596175 kpn_dash: kpn_clear: 1618596175 bkpn: BOSCH 1618596175 bkpn_clear: BOSCH 1618596175 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 1618596175 sr_ns: BOSCH1618596175
r: 02221712 p: 8.88 pid: 134452 b: BOSCH q: 0 st: lt: 8 ean: 3165140521727 sr: BOSCH 2608585937 sr_no_br: 2608585937 sr_no_br_cl: 2608585937 sr_cl: BOSCH2608585937 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Diameter 10,5 mm Cutting length 87 mm Drill bit type Metal drill bit Overall length 133 mm Shank size 10,5 mm Shank type Cylindrical Material (drill bit) HSS-G Standard DIN 338 n: BOSCH 2608585937 metal drill bit HSS-G, DIN 338, 10.5 x 87 x 133 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-G, DIN 338, 10.5 x 87 x 133 mm Drilling with high precision HSS spiral drill bit offers full drilling functionality for standard use on metal Self-centring, 135-degree split tip combines active cutting action with perfect centring without drift Advantages Maximum precision - The HSS spiral drill ground provides maximum precision when drilling into metal. The self-centring 135-degree split point combines active cutting action with perfect centring without running, delivering maximum precision. The split tip makes pre-punching or pre-drilling up to 10 mm unnecessary. This precision ground HSS (High-Speed Steel) drill bit offers up to 40% higher drilling speed and up to 50% lower feed pressure than standard ground HSS drills with chisel edges. This drill bit is designed for drilling holes in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, temper cast iron, non-ferrous metals and hard plastics. The drill has a cylindrical shank (drill bit and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS spiral drill ground is produced in accordance with DIN 338. The drill bit is type N (groove angle) with a tip of 135 degrees and a diameter tolerance of h8. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-G, DIN 338, 10.5 x 87 x 133 mm kpn: 2608585937 kpn_dash: kpn_clear: 2608585937 bkpn: BOSCH 2608585937 bkpn_clear: BOSCH 2608585937 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608585937 sr_ns: BOSCH2608585937
