r: 01049066 p: 13.96 pid: 130267 b: BOSCH q: 0 st: lt: 8 ean: 3165140060882 sr: BOSCH 2608596716 sr_no_br: 2608596716 sr_no_br_cl: 2608596716 sr_cl: BOSCH2608596716 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 6,5 mm Drill bit type Metal drill bit Overall length 101 mm Shank size 6,5 mm Shank type Cylindrical Material (drill bit) HSS Surface treatment (drill bit) TiN Standard DIN 338 Cutting length 63 mm n: BOSCH 2608596716 metal drill bit HSS-TiN, DIN 338, 6.5 x 63 x 101 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-TiN, DIN 338, 6.5 x 63 x 101 mm Maximum service life HSS spiral drill bit TiN-coated offers longer service life Titanium nitride coating ensures very low friction and minimal wear Advantages Maximum service life - The HSS spiral drill bit TiN-coated offers maximum service life when drilling in metal. When using the right cooling system, the drill bit has very low friction and minimal wear thanks to the TiN-coating. Thanks to the high surface quality of this ground spiral drill made of HSS (High-Speed Steel), the drill bit can be used for long periods of time. Suitable for alloyed and unalloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics, such as Plexiglas. This drill has a cylindrical shank (drill and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS spiral drill bit TiN-coated is produced in accordance with DIN 338. The drill bit is type N (spiral angle) with a tip of 135 degrees and a diameter tolerance of h8. The pointed split point ensures an active cutting action and perfect centring without expiring. Do not use in aluminium and only with a coolant. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-TiN, DIN 338, 6.5 x 63 x 101 mm kpn: 2608596716 kpn_dash: kpn_clear: 2608596716 bkpn: BOSCH 2608596716 bkpn_clear: BOSCH 2608596716 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608596716 sr_ns: BOSCH2608596716
r: 02222551 p: 13.31 pid: 133462 b: BOSCH q: 0 st: lt: 8 ean: 3165140189088 sr: BOSCH 2608597776 sr_no_br: 2608597776 sr_no_br_cl: 2608597776 sr_cl: BOSCH2608597776 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 5,5 mm Cutting length 200 mm Drill bit type Hammer drill bit Overall length 265 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 2608597776 hammer drill SDS-Plus-5, 5.5 x 200 x 265 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 5.5 x 200 x 265 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Toothed carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill bit features spirals and notches that make it easier for the drill bit to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 5.5 x 200 x 265 mm kpn: 2608597776 kpn_dash: kpn_clear: 2608597776 bkpn: BOSCH 2608597776 bkpn_clear: BOSCH 2608597776 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608597776 sr_ns: BOSCH2608597776
r: 02221530 p: 13.07 pid: 131539 b: BOSCH q: 0 st: lt: 8 ean: 3165140483308 sr: BOSCH 2608585596 sr_no_br: 2608585596 sr_no_br_cl: 2608585596 sr_cl: BOSCH2608585596 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 3,5 mm Cutting length 100 mm Drill bit type Hammer drill bit Overall length 160 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 2608585596 hammer drill SDS-Plus-5, 3.5 x 100 x 160 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 3.5 x 100 x 160 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Toothed carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill bit features spirals and notches that make it easier for the drill bit to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 3.5 x 100 x 160 mm kpn: 2608585596 kpn_dash: kpn_clear: 2608585596 bkpn: BOSCH 2608585596 bkpn_clear: BOSCH 2608585596 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608585596 sr_ns: BOSCH2608585596
r: 02790647 p: 13.07 pid: 136074 b: BOSCH q: 0 st: lt: 8 ean: 3165140656443 sr: BOSCH 2608587802 sr_no_br: 2608587802 sr_no_br_cl: 2608587802 sr_cl: BOSCH2608587802 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 3 mm Cutting length 100 mm Drill bit type Hammer drill bit Overall length 160 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 2608587802 hammer drill SDS-Plus-5, 3 x 100 x 160 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill SDS-Plus-5, 3 x 100 x 160 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 3 x 100 x 160 mm kpn: 2608587802 kpn_dash: kpn_clear: 2608587802 bkpn: BOSCH 2608587802 bkpn_clear: BOSCH 2608587802 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608587802 sr_ns: BOSCH2608587802
r: 02222344 p: 13.05 pid: 133304 b: BOSCH q: 0 st: lt: 8 ean: 3165140099813 sr: BOSCH 2608597214 sr_no_br: 2608597214 sr_no_br_cl: 2608597214 sr_cl: BOSCH2608597214 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 2,5 mm Material (drill bit) HSS-R Cutting length 14 mm Standard DIN 1897 Quantity per blister 10 Shank type Cylindrical Shank size 2,5 mm Overall length 43 mm Drill bit type Metal drill bit n: BOSCH 2608597214 body drill bit HSS-R, DIN 1897, 2.5 x 14 x 43 mm (10 pieces) cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Body drill bit HSS-R, DIN 1897, 2.5 x 14 x 43 mm 10x Extra short drill bit for drilling in tight spots Extra short drill bit for drilling in tight places The spiral has an ideal useful length for most work in tight places Advantages For tight spots - The HSS body drill bit is an extra short drill bit for drilling in tight spots, applying holes in metal sheets and pipes with a thickness of 2-6 mm. The drill has a spiral with ideal useful length for most work in tight places. Simple drilling without pre-punching thanks to self-centring, split tip that prevents slippage and enables effective drilling in tight spaces. Suitable for construction steel, alloy metal, non-ferrous metal and plastics. This drill has a cylindrical shank (drill and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. Also very suitable for hand drilling. The HSS body drill bit is manufactured in accordance with DIN 1897. The drill bit is type N (groove angle) with a tip of 118 degrees and a diameter tolerance of h8. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: body drill bit HSS-R, DIN 1897, 2.5 x 14 x 43 mm (10 pieces) kpn: 2608597214 kpn_dash: kpn_clear: 2608597214 bkpn: BOSCH 2608597214 bkpn_clear: BOSCH 2608597214 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608597214 sr_ns: BOSCH2608597214
r: 02220313 p: 12.5 pid: 131805 b: BOSCH q: 0 st: lt: 8 ean: 3165140046329 sr: BOSCH 1618596318 sr_no_br: 1618596318 sr_no_br_cl: 1618596318 sr_cl: BOSCH1618596318 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 13 mm Cutting length 150 mm Drill bit type Hammer drill bit Overall length 215 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 1618596318 hammer drill SDS-Plus-5, 13 x 150 x 215 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 13 x 150 x 215 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 13 x 150 x 215 mm kpn: 1618596318 kpn_dash: kpn_clear: 1618596318 bkpn: BOSCH 1618596318 bkpn_clear: BOSCH 1618596318 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 1618596318 sr_ns: BOSCH1618596318
r: 03059910 p: 12.34 pid: 135527 b: BOSCH q: 0 st: lt: 8 ean: 6949509231536 sr: BOSCH 2608577538 sr_no_br: 2608577538 sr_no_br_cl: 2608577538 sr_cl: BOSCH2608577538 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 11 mm Cutting length 94 mm Drill bit type Metal drill bit Overall length 142 mm Shank size 1/4 inch Shank type Hex Material (drill bit) HSS Standard DIN 338 n: BOSCH 2608577538 metal drill bit HSS PointTeQ 11.0mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS PointTeQ 11.0mm Fast drilling in metal The HSS PointTeQ twist drill bit with hex shank is ideal for fast drilling in metal When drilling at high speeds, there is less heat build-up and wear on the drill bit. The PointTeQ tip ensures lasting sharpness and durability Advantages Fast drilling in metal - The HSS PointTeQ spiral drill bit with hex shank drills quickly in metal. This drill bit is designed for high-speed drilling, which minimises heating and wear on the drill bit. The PointTeQ design of the tip ensures lasting sharpness and high durability. The self-centring tip prevents drift and enables quick and easy drill start. The spiral with a black oxide coating ensures fast chip removal. The drill's hexagonal shank ensures stability and firm locking of the drill bit in the chuck, making it extra reliable. The shank strengthens the body of the drill bit and reduces the risk of breakage when drilling with a diameter smaller than 6 mm. The drill bit is compatible with 1/4-inch hex shank systems for universal use with impact screwdrivers, drill/drivers and drill stands. The four-surface tip of the HSS PointTeQ spiral drill bit enables active drilling and perfect centring. Type N (spiral angle) drill bit with 135° tip in accordance with DIN 338. Hexagonal shank for maximum power transfer in standard three-claw drill chucks and drill/screw machine holders. ds: dsc: kts: metal drill bit HSS PointTeQ 11.0mm kpn: 2608577538 kpn_dash: kpn_clear: 2608577538 bkpn: BOSCH 2608577538 bkpn_clear: BOSCH 2608577538 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577538 sr_ns: BOSCH2608577538
r: 02221539 p: 12.27 pid: 132114 b: BOSCH q: 0 st: lt: 8 ean: 3165140483391 sr: BOSCH 2608585605 sr_no_br: 2608585605 sr_no_br_cl: 2608585605 sr_cl: BOSCH2608585605 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 8,5 mm Cutting length 150 mm Drill bit type Hammer drill bit Overall length 215 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 2608585605 hammer drill SDS-Plus-5, 8.5 x 150 x 215 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 8.5 x 150 x 215 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill bit features spirals and notches that make it easier for the drill bit to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 8.5 x 150 x 215 mm kpn: 2608585605 kpn_dash: kpn_clear: 2608585605 bkpn: BOSCH 2608585605 bkpn_clear: BOSCH 2608585605 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608585605 sr_ns: BOSCH2608585605
r: 01049064 p: 11.8 pid: 129754 b: BOSCH q: 0 st: lt: 8 ean: 3165140060868 sr: BOSCH 2608596706 sr_no_br: 2608596706 sr_no_br_cl: 2608596706 sr_cl: BOSCH2608596706 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 5,5 mm Drill bit type Metal drill bit Overall length 93 mm Shank size 5,5 mm Shank type Cylindrical Material (drill bit) HSS Surface treatment (drill bit) TiN Standard DIN 338 Cutting length 57 mm n: BOSCH 2608596706 metal drill bit HSS-TiN, DIN 338, 5.5 x 57 x 93 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-TiN, DIN 338, 5.5 x 57 x 93 mm Maximum service life HSS spiral drill bit TiN-coated offers longer service life Titanium nitride coating ensures very low friction and minimal wear Advantages Maximum service life - The HSS spiral drill bit TiN-coated offers maximum service life when drilling in metal. When using the right cooling system, the drill bit has very low friction and minimal wear thanks to the TiN-coating. Thanks to the high surface quality of this ground spiral drill made of HSS (High-Speed Steel), the drill bit can be used for long periods of time. Suitable for alloyed and unalloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics, such as Plexiglas. This drill has a cylindrical shank (drill and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS spiral drill bit TiN-coated is produced in accordance with DIN 338. The drill bit is type N (spiral angle) with a tip of 135 degrees and a diameter tolerance of h8. The pointed split point ensures an active cutting action and perfect centring without expiring. Do not use in aluminium and only with a coolant. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-TiN, DIN 338, 5.5 x 57 x 93 mm kpn: 2608596706 kpn_dash: kpn_clear: 2608596706 bkpn: BOSCH 2608596706 bkpn_clear: BOSCH 2608596706 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608596706 sr_ns: BOSCH2608596706
r: 02790076 p: 11.43 pid: 134524 b: BOSCH q: 0 st: lt: 8 ean: 3165140872171 sr: BOSCH 2608577130 sr_no_br: 2608577130 sr_no_br_cl: 2608577130 sr_cl: BOSCH2608577130 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 9,5 mm Cutting length 81 mm Drill bit type Metal drill bit Overall length 125 mm Shank size 1/4 inch Shank type Hex Material (drill bit) HSS n: BOSCH 2608577130 twist drill bit HSS hex shank 9.5 x 81 x 125 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Spiral drill bit HSS hex shank 9.5 x 81 x 125 mm Very robust with impact screwdrivers Extremely robust Impact Control HSS spiral drill for drilling in metal, especially with impact screwdrivers The super-strong body is extremely robust Advantages Extremely robust - The very robust Impact Control HSS spiral drill bit is suitable for drilling in metal, especially with impact screwdrivers. The very strong body is exceptionally robust. The spiral drill is precision ground from solid metal and fitted with an oxide-coated groove. This gives the drill an excellent surface quality for low-wear drilling into materials. Suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, metal sheets and plastics. This drill bit is suitable for drive systems for 1/4-inch hex shafts, for universal use with drill/screwdrivers, impact screwdrivers and drill stands. Hex shank for maximum power transfer in standard three-claw drill chucks and drill/screwdriver holders. ds: dsc: kts: twist drill bit HSS hex shank 9.5 x 81 x 125 mm kpn: 2608577130 kpn_dash: kpn_clear: 2608577130 bkpn: BOSCH 2608577130 bkpn_clear: BOSCH 2608577130 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577130 sr_ns: BOSCH2608577130
r: 02220299 p: 11.41 pid: 129104 b: BOSCH q: 0 st: lt: 8 ean: 3165140027885 sr: BOSCH 1618596180 sr_no_br: 1618596180 sr_no_br_cl: 1618596180 sr_cl: BOSCH1618596180 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 11 mm Cutting length 200 mm Drill bit type Hammer drill bit Overall length 265 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 1618596180 hammer drill SDS-Plus-5, 11 x 200 x 265 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 11 x 200 x 265 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 11 x 200 x 265 mm kpn: 1618596180 kpn_dash: kpn_clear: 1618596180 bkpn: BOSCH 1618596180 bkpn_clear: BOSCH 1618596180 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 1618596180 sr_ns: BOSCH1618596180
r: 02790649 p: 11.29 pid: 136864 b: BOSCH q: 0 st: lt: 8 ean: 3165140656764 sr: BOSCH 2608587834 sr_no_br: 2608587834 sr_no_br_cl: 2608587834 sr_cl: BOSCH2608587834 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 7 mm Cutting length 200 mm Drill bit type Hammer drill bit Overall length 265 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 2608587834 hammer drill SDS-Plus-5, 7 x 200 x 265 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 7 x 200 x 265 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 7 x 200 x 265 mm kpn: 2608587834 kpn_dash: kpn_clear: 2608587834 bkpn: BOSCH 2608587834 bkpn_clear: BOSCH 2608587834 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608587834 sr_ns: BOSCH2608587834
r: 01049063 p: 10.97 pid: 128872 b: BOSCH q: 0 st: lt: 8 ean: 3165140060851 sr: BOSCH 2608596701 sr_no_br: 2608596701 sr_no_br_cl: 2608596701 sr_cl: BOSCH2608596701 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 5 mm Drill bit type Metal drill bit Overall length 86 mm Shank size 5 mm Shank type Cylindrical Material (drill bit) HSS Surface treatment (drill bit) TiN Standard DIN 338 Cutting length 52 mm n: BOSCH 2608596701 metal drill bit HSS-TiN, DIN 338, 5 x 52 x 86 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-TiN, DIN 338, 5 x 52 x 86 mm Maximum service life HSS spiral drill bit TiN-coated offers longer service life Titanium nitride coating ensures very low friction and minimal wear Advantages Maximum service life - The HSS spiral drill bit TiN-coated offers maximum service life when drilling in metal. When using the right cooling system, the drill bit has very low friction and minimal wear thanks to the TiN-coating. Thanks to the high surface quality of this ground spiral drill made of HSS (High-Speed Steel), the drill bit can be used for long periods of time. Suitable for alloyed and unalloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics, such as Plexiglas. This drill has a cylindrical shank (drill and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS spiral drill bit TiN-coated is produced in accordance with DIN 338. The drill bit is type N (spiral angle) with a tip of 135 degrees and a diameter tolerance of h8. The pointed split point ensures an active cutting action and perfect centring without expiring. Do not use in aluminium and only with a coolant. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-TiN, DIN 338, 5 x 52 x 86 mm kpn: 2608596701 kpn_dash: kpn_clear: 2608596701 bkpn: BOSCH 2608596701 bkpn_clear: BOSCH 2608596701 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608596701 sr_ns: BOSCH2608596701
r: 08052044 p: 10.95 pid: 133056 b: BOSCH q: 0 st: lt: 8 ean: 4059952539201 sr: BOSCH 2608900627 sr_no_br: 2608900627 sr_no_br_cl: 2608900627 sr_cl: BOSCH2608900627 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_196 act: 1 avo: av: Diameter 10 mm Drill bit type Multi-purpose drill bit Overall length 150 mm Shank size 10 mm Shank type Cylindrical Material (drill bit) Carbide tip Cutting length 90 mm Product Range Bosch Expert n: BOSCH 2608900627 Expert universal drill CYL-9 MultiConstruction 10x90x150mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description EXPERT Universal drill bit CYL-9 MultiConstruction 10x90x150 Up to 5x more accurate than Bosch's CYL-3 drill bit Accurate drilling is easy with the patented Bosch Centering Geometry. Cylindrical shank compatible with three-claw drill chucks. Advantages Up to 5x more accurate than Bosch's CYL-3 drill bit - On a modern construction site, you work with many different materials and you never know what's next to drill. Finding the right drill bit can be difficult and time-consuming, unless you have the EXPERT MultiConstruction drill bit on hand. This extremely versatile drill bit can accurately drill into hard materials like granite without slipping thanks to its sharp tip and advanced geometric design. Made of optimised carbide by our fine grinding manufacturing techniques. The drill can also handle concrete, brick, soft tiles, wood and metal. Always a professional result, regardless of the material. The Bosch EXPERT CYL-9 MultiConstruction cylindrical drill bit is the only drill bit that should always be in your toolbox: you will never lose time searching for the right drill bit again. Cylindrical shank compatible with three-claw drill chucks. Maximum precision when drilling in various materialsThis extremely versatile drill bit can accurately drill into hard materials such as tiles and granite without slipping thanks to its sharp tip and advanced geometric design. Made of optimised carbide by our fine grinding manufacturing techniques. The drill can also handle concrete, brick, wood and metal. Always a professional result regardless of the material. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: Expert universal drill CYL-9 MultiConstruction 10x90x150mm kpn: 2608900627 kpn_dash: kpn_clear: 2608900627 bkpn: BOSCH 2608900627 bkpn_clear: BOSCH 2608900627 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900627 sr_ns: BOSCH2608900627
r: 01049062 p: 10.93 pid: 128867 b: BOSCH q: 0 st: lt: 8 ean: 3165140060844 sr: BOSCH 2608596696 sr_no_br: 2608596696 sr_no_br_cl: 2608596696 sr_cl: BOSCH2608596696 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 4,5 mm Drill bit type Metal drill bit Overall length 80 mm Shank size 4,5 mm Shank type Cylindrical Material (drill bit) HSS Surface treatment (drill bit) TiN Standard DIN 338 Cutting length 47 mm n: BOSCH 2608596696 metal drill bit HSS-TiN, DIN 338, 4.5 x 47 x 80 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-TiN, DIN 338, 4.5 x 47 x 80 mm Maximum service life HSS spiral drill bit TiN-coated offers longer service life Titanium nitride coating ensures very low friction and minimal wear Advantages Maximum service life - The HSS spiral drill bit TiN-coated offers maximum service life when drilling in metal. When using the right cooling system, the drill bit has very low friction and minimal wear thanks to the TiN-coating. Thanks to the high surface quality of this ground spiral drill made of HSS (High-Speed Steel), the drill bit can be used for long periods of time. Suitable for alloyed and unalloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics, such as Plexiglas. This drill has a cylindrical shank (drill and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS spiral drill bit TiN-coated is produced in accordance with DIN 338. The drill bit is type N (spiral angle) with a tip of 135 degrees and a diameter tolerance of h8. The pointed split point ensures an active cutting action and perfect centring without expiring. Do not use in aluminium and only with a coolant. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-TiN, DIN 338, 4.5 x 47 x 80 mm kpn: 2608596696 kpn_dash: kpn_clear: 2608596696 bkpn: BOSCH 2608596696 bkpn_clear: BOSCH 2608596696 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608596696 sr_ns: BOSCH2608596696
r: 08051790 p: 10.9 pid: 139473 b: BOSCH q: 0 st: lt: 8 ean: 4059952534022 sr: BOSCH 2608900328 sr_no_br: 2608900328 sr_no_br_cl: 2608900328 sr_cl: BOSCH2608900328 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_196 act: 1 avo: av: Diameter 36 mm Drill bit type Wood drill bit Overall length 152 mm Shank size 1/4 inch Shank type Hex Material (drill bit) Chrome-vanadium steel Product Range Bosch Expert n: BOSCH 2608900328 Expert speed drill Self Cut Speed, hexagonal shank 36 x 152 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description EXPERT Speed Drill Self Cut Speed, hex shank 36 x 152 mm Up to 3x faster than a 2609255269 speed drill bit from Bosch Fast drilling is easy with Bosch Tip Technology 1/4-inch hexagonal shank for use with three-claw drill chucks and hexagonal drill/screwdriver chucks. Advantages Up to 3x faster than a 2609255269 speed drill bit from Bosch - Speed drills are a great accessory for electricians and other installers and builders. What if they could be even faster and more efficient? With Bosch Tip Technology, it is possible. The EXPERT Self Cut Speed features the most advanced designs for speed drills, making it easy to use and very practical for professionals who need to do tough jobs. The patented Bosch screw tip brings the speed drill into wood with even the lightest pressure. This is especially useful when you need to drill upside down or into tight recesses. The advanced shovel design provides extra speed. The Bosch EXPERT Self Cut Speed drill offers efficiency and convenience to professionals who need to drill holes for cabling, pipes and other hardware installations. The drill also works perfectly in all types of softwood. 1/4-inch hex shank for use with three-claw drill chucks and hex drill/screw machine chucks. Drilling in wood at maximum speedThe Expert SelfCut Speed features the most advanced designs for speed drilling, making it easy to use and very practical for professionals with tough jobs. The patented Bosch screw tip takes the speed drill into wood with even the lightest pressure. This is especially useful when you need to drill upside down or into tight recesses. The advanced shovel design provides extra speed. Hex shank for maximum power transfer in standard three-claw and 6-sided drill chuck ds: dsc: kts: Expert speed drill Self Cut Speed, hexagonal shank 36 x 152 mm kpn: 2608900328 kpn_dash: kpn_clear: 2608900328 bkpn: BOSCH 2608900328 bkpn_clear: BOSCH 2608900328 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900328 sr_ns: BOSCH2608900328
r: 02220301 p: 10.77 pid: 129150 b: BOSCH q: 0 st: lt: 8 ean: 3165140027915 sr: BOSCH 1618596183 sr_no_br: 1618596183 sr_no_br_cl: 1618596183 sr_cl: BOSCH1618596183 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 13 mm Cutting length 100 mm Drill bit type Hammer drill bit Overall length 165 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 1618596183 hammer drill SDS-Plus-5, 13 x 100 x 165 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 13 x 100 x 165 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 13 x 100 x 165 mm kpn: 1618596183 kpn_dash: kpn_clear: 1618596183 bkpn: BOSCH 1618596183 bkpn_clear: BOSCH 1618596183 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 1618596183 sr_ns: BOSCH1618596183
r: 02790044 p: 10.65 pid: 134104 b: BOSCH q: 0 st: lt: 8 ean: 3165140858908 sr: BOSCH 2608577062 sr_no_br: 2608577062 sr_no_br_cl: 2608577062 sr_cl: BOSCH2608577062 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 9 mm Cutting length 81 mm Drill bit type Metal drill bit Overall length 125 mm Shank size 1/4 inch Shank type Hex Material (drill bit) HSS n: BOSCH 2608577062 twist drill bit HSS hex shank 9 x 81 x 125 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Spiral drill bit HSS hex shank 9 x 81 x 125 mm Very robust with impact screwdrivers Extremely robust Impact Control HSS spiral drill for drilling in metal, especially with impact screwdrivers The super-strong body is extremely robust Advantages Extremely robust - The very robust Impact Control HSS spiral drill bit is suitable for drilling in metal, especially with impact screwdrivers. The very strong body is exceptionally robust. The spiral drill is precision ground from solid metal and fitted with an oxide-coated groove. This gives the drill an excellent surface quality for low-wear drilling into materials. Suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, metal sheets and plastics. This drill bit is suitable for drive systems for 1/4-inch hex shafts, for universal use with drill/screwdrivers, impact screwdrivers and drill stands. Hex shank for maximum power transfer in standard three-claw drill chucks and drill/screwdriver holders. ds: dsc: kts: twist drill bit HSS hex shank 9 x 81 x 125 mm kpn: 2608577062 kpn_dash: kpn_clear: 2608577062 bkpn: BOSCH 2608577062 bkpn_clear: BOSCH 2608577062 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577062 sr_ns: BOSCH2608577062
r: 02220312 p: 10.6 pid: 129870 b: BOSCH q: 0 st: lt: 8 ean: 3165140046312 sr: BOSCH 1618596316 sr_no_br: 1618596316 sr_no_br_cl: 1618596316 sr_cl: BOSCH1618596316 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 11 mm Cutting length 150 mm Drill bit type Hammer drill bit Overall length 215 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 1618596316 hammer drill SDS-Plus-5, 11 x 150 x 215 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 11 x 150 x 215 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Benefits Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 11 x 150 x 215 mm kpn: 1618596316 kpn_dash: kpn_clear: 1618596316 bkpn: BOSCH 1618596316 bkpn_clear: BOSCH 1618596316 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 1618596316 sr_ns: BOSCH1618596316
r: 02221538 p: 10.58 pid: 134281 b: BOSCH q: 0 st: lt: 8 ean: 3165140483384 sr: BOSCH 2608585604 sr_no_br: 2608585604 sr_no_br_cl: 2608585604 sr_cl: BOSCH2608585604 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 8,5 mm Cutting length 100 mm Drill bit type Hammer drill bit Overall length 165 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 2608585604 hammer drill SDS-Plus-5, 8.5 x 100 x 165 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 8.5 x 100 x 165 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill bit features spirals and notches that make it easier for the drill bit to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 8.5 x 100 x 165 mm kpn: 2608585604 kpn_dash: kpn_clear: 2608585604 bkpn: BOSCH 2608585604 bkpn_clear: BOSCH 2608585604 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608585604 sr_ns: BOSCH2608585604
