Extra fine cuts for removing mortar and abrasive material
The Starlock ACZ 70 RT5 saw blade guarantees extra-fine cuts in mortar and abrasive material
The very thin saw blade with a cutting width of 1.6 mm offers precise fine cuts
Advantages
Extra fine cuts for milling out - The Starlock ACZ 70 RT5 blade guarantees extra fine cuts for milling out mortar and abrasive material.
The thin saw blade with a milling width of 1.6 mm offers precise cuts.
The extra-slim cutting edge is coated with a high-quality carbide with fine grain size 50 for very fine cuts.
This blade offers perfect results when removing very thin mortar joints between tiles, or even joints in porous concrete and soft brick for concealing cables and pipes.
Also suitable for cutting precise recesses in difficult abrasive materials such as cementitious fibreboard or epoxy/glass fibre reinforced plastic.
It can be used with all Starlock, Starlock Plus and Starlock Max power tools and normal multitools.
It can be used with all Starlock, Starlock Plus and Starlock Max power tools and normal multitools.
The saw blade is coated with a strong carbide with grain size 50.
This offers high wear resistance and an extralong service life.
The pointed ends of the segment saw blade allow precise cuts into tight corners, while the design of the round saw blade enables straight cuts.
The Starlock Snap-In insert system allows saw blades to be removed and changed within 3 seconds without having to touch the saw blade.
The insert system offers the highest power transfer thanks to a 3-dimensional close connection between the machine and the accessory.
Starlock connection for optimum power transfer and easy saw blade changes within three seconds.
