- Shank type: SDS-max
- Tool holder size: Not applicable
- Tool holder type: SDS-plus
Bosch drill chucks, collets, adapters and extensions for drill bits and cutters
Bosch drill chucks, collets, adapters and extensions put drill bits and cutters on the machine the right way. They belong to Bosch machining tools.
Choose a collet by the shank diameter of the cutter and by the machine. There are collets of 6, 8 and 12 mm, with or without a collet nut, plus versions for specific trimmers and routers such as the GKF 600 and the GOF 12/1300. A collet that does not exactly fit the shank makes the cutter run out of true.
A chuck or adapter puts a tool on a different holder. There is a drill chuck for SDS-Max and SDS-Plus, an adapter for two-piece core cutters on rotary hammers and an SDS-Plus shank for core cutters. The EXPERT Power Change Plus adapters with an 8.7 or 11 mm hex shank connect hole saws to a drill, with extensions up to 300 mm for deep holes.
A 6, 8 and 10 mm depth stop set keeps every hole to the same depth. An extension with a 1/4" hex shank takes a Self Cut Speed spade bit deeper into the workpiece.
- Max. clamping capacity: 8 mm
- Shank size: 8,7 mm
- Shank type: Hexagonal
- Shank size: 11 mm
- Shank type: Hexagonal
- Accessory/Part type: Depth stop set
- Length: 305 mm
- Connection size: 1/4"
- Connection type: External hexagon
- Max. clamping capacity: 6 mm
- Max. clamping capacity: 8 mm
- Max. clamping capacity: 12 mm
- Max. clamping capacity: 6 mm
- Max. clamping capacity: 6 mm
- Max. clamping capacity: 8 mm
- Shank type: SDS-plus
- Tool holder size: M16
- Tool holder type: External thread and internal hexagon
- Length: 152 mm
- Connection size: 1/4"
- Connection type: External hexagon
- Length: 305 mm
- Connection size: 1/4"
- Connection type: External hexagon
- Max. clamping capacity: 8 mm