- Thread designation: M8
- VdS approved: Yes
Beam clamps and trapezoidal hangers with M8 and M10 thread for mounting to beams
Fischer beam clamps and trapezoidal hangers create a suspension point on a steel beam or profile without drilling or welding. Installers of pipework, cable trays and air ducts use them to fix threaded rods to beams and trusses. They are part of the connections for construction.
The TKL beam clamp grips the flange of a beam and offers a connection for threaded rod in M 8 or M 10. The TZ and TZH trapezoidal hangers are made for trapezoidal sheet, such as steel roof decking and cladding, and also offer an M 8 or M 10 connection. The TKR 31 beam clamp is a different type for anyone who needs an alternative clamping form.
Choose by substrate first: a beam or girder calls for a beam clamp, profiled sheet for a trapezoidal hanger. The thread of your suspension, M 8 or M 10, then decides the version. Also check the thickness of the flange or sheet so the clamp closes properly, and allow for the weight that will hang from the fixing point.
- Thread designation: M8
- VdS approved: Yes
- Thread designation: M10
- VdS approved: Yes
- Thread designation: M10
- VdS approved: Yes
- Thread designation: M8
- VdS approved: Yes
- Thread designation: M10
- VdS approved: Yes