Choose your filter
Filter
Categories
Brand
Stocked items only
Price excl. VAT
to €
Max. capacity (kN)
Max. capacity
Diameter
Max. working pressure
Action (cylinder)
Bolt size
Thread size*
Outer diameter
Width
Stroke length
Weight
Piston width
Type
Maximum pressure
Thread form
Piston area
Maximum piston displacement
Outside diameter
Connecting thread
Piston outer diameter
Product weight
Piston inner diameter

Buy a Gift Card

Gift Card

Hydraulic tools for mounting and dismounting bearings

Hydraulic tools for mounting and dismounting bearings, pins and bushes without hammer blows that damage parts, used by maintenance technicians in heavy industry, agriculture and earthmoving. The force comes from a pump, so even large and tight-fitting parts move in a controlled way.

Hydraulic nuts push a bearing onto or off its shaft or sleeve. You choose them by the thread of the shaft, with the HMV series running from smaller sizes to very large ones, up to M670x6. A wedge spreader set opens flanges and joints to replace gaskets or align parts; check the spreading force, for example 13 tonnes. For hinge pins and bushes in cranes, excavators and lifting gear there are pin and bushing maintenance kits of 50 tonnes. Choose between a hand-operated pump for on-site use and a pneumatic foot-operated pump where compressed air is available.

The brands are SKF, Hi-Force and Facom. These tools belong to hydraulic tools. If a seized nut has to come off first, the hydraulic nut splitters and wire rope cutters take over.

Category Hydraulic disassembly tool kit Hydraulic disassembly tool kit
Category Hydraulic flange separator Hydraulic flange separator
Category Hydraulic flange separator kit Hydraulic flange separator kit
Category Hydraulic nut Hydraulic nut
Category Hydraulic assembly and disassembly tool kit Hydraulic assembly and disassembly tool kit
Category Hydraulic spreading wedge Hydraulic spreading wedge
Category Hydraulic spreading wedge set Hydraulic spreading wedge set
Category Hydraulic pre-tensioning cylinder Hydraulic pre-tensioning cylinder
skf_hmv134e

SKF HMV 134E hydraulic nut M670x6

  • Outer diameter: 826 mm
  • Width: 76 mm
  • Thread size*: Tr670 x 6
Delivery time average 12 days.
Recommended Retail Price €13,369.29
9,144.40
€7,557.36 excl. VAT
skf_hmv126e

SKF HMV 126E hydraulic nut M630x6

  • Outer diameter: 782 mm
  • Width: 74 mm
  • Thread size*: Tr630 x 6
Delivery time average 12 days.
Recommended Retail Price €12,231.89
8,366.60
€6,914.55 excl. VAT
skf_hmv120e

SKF HMV 120E hydraulic nut M600x6

  • Outer diameter: 748 mm
  • Width: 73 mm
  • Thread size*: Tr600 x 6
Delivery time average 12 days.
Recommended Retail Price €11,578.49
7,919.60
€6,545.12 excl. VAT
⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.