Choose your filter
Filter
Categories
Brand
Stocked items only
Price excl. VAT
to €
Inner diameter
Outer diameter

Buy a Gift Card

Gift Card

Mounting mandrels and assembly rods for striking work

Mounting mandrels and assembly rods turn the force of a hammer blow into directed pressure on parts that have to go in or come out: pins, bushes, bearings and shaft parts. Mounting mandrels come from 6 to 16 mm thick, in lengths from 200 to 380 mm, so you can pick the one that fits the bore without touching the edge.

Assembly rods and mounting pins of 500 and 600 mm add leverage and reach when lining up flanges and holes. A setting iron with hand protection grip keeps your hand out of the line of the blow, and a conical mandrel helps centre bores.

For fitting bearings there are impact sleeves and strike rings that spread the blow evenly over the ring, so the raceway is not damaged. Choose by diameter and length, and by the material of the workpiece: the better the mandrel fills the bore, the less it deflects. SKF, Gedore, Rennsteig and Wera supply these tools. They belong to the striking tools, together with the hammer caps, loose heads and hickory handles that keep hammers in service.

Category Rivet setter Rivet setter
Category Assembly mandrel Assembly mandrel
Category Impact sleeve Impact sleeve
Category Impact ring Impact ring
skf_tmft33_a1026

SKF TMFT 33-A10/26 strike ring

  • Inner diameter: 10 mm
  • Outer diameter: 26 mm
On stock, immediately available.
16.20
€13.39 excl. VAT
⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.