r: 02470522 p: 35.84 pid: 31895 b: AIRPRESS q: 0 st: lt: 1 ean: 8712418264210 sr: AIRPRESS 42078 sr_no_br: 42078 sr_no_br_cl: 42078 sr_cl: AIRPRESS42078 sr_dash: sold: 1397.76 p_range: none type: standard act: 1 avo: 1 av: Connection size 1/4" Max. working pressure 12 bar n: AIRPRESS 42078 tyre pump Pro with hose clips 12 bar cn: TYRE INFLATOR cn2: TYRE INFLATOR cn_clear: TYREINFLATOR d: Product description Professional tyre pump 12 bar If you want to fill tyres with air, bleed them and measure the pressure, you can do it with this professional tyre pump up to 12 bar. The tyre pump can be connected to the compressor through the two included insert nipples Euro and Orion. The connection is 1/4" male thread with a rubber ring for an airtight seal. This professional tyre pump will be delivered with a 50 cm long hose fitted with a plug-in nipple. When the insertion nipple is connected to the valve, the tyre pump will only start operating. The pressure gauge allows reading the number of BAR and PSI. Furthermore, the pressure gauge is protected by means of a rubber rim, so it can take a beating. The tyre pump is made of high-quality products. The handle is made of plastic, making the tyre pump comfortable to hold. This professional tyre pump can be used for home use, as well as for car garages. The tyre pump has high accuracy and allows you to get on the road safely. In doing so, you will have less wear and tear and a comfortable ride. The tyre inflator features a rubber ring for air sealing. But of course, it can happen that the ring gets lost or broken. To make an airtight connection then, use Teflon sealing tape or sealant. Inflating bicycle tyres It is possible to inflate bicycle tyres with this tyre pump. By using adapters, which are available separately, you can easily connect the tyre inflator to the valve. The adapters are car pump valve to bike valve adapter or the print adapter to go from a car pump to a bike valve. ds: dsc: kts: tyre pump Pro with hose clips 12 bar kpn: 42078 kpn_dash: kpn_clear: 42078 bkpn: AIRPRESS 42078 bkpn_clear: AIRPRESS 42078 c_path: Home / Tools / Powered tools / Pneumatic tools / Miscellaneous / Tyre inflator | Home / Our brands / Airpress / Airpress tools / Airpress powered tools / Airpress pneumatic tools / Airpress miscellaneous / Airpress tyre inflator sr_no_br_cl_ns: 42078 sr_ns: AIRPRESS42078
r: 02087276 p: 6.36 pid: 34169 b: AIRPRESS q: 0 st: lt: 1 ean: 8712418003949 sr: AIRPRESS 4300011 sr_no_br: 4300011 sr_no_br_cl: 4300011 sr_cl: AIRPRESS4300011 sr_dash: sold: 941.28 p_range: none type: standard act: 1 avo: 1 av: Connection type Internal thread Version (blow nozzle) Straight Connection size 1/4" Thread type BSPP n: AIRPRESS 4300011 Blow gun long with plug-in nipple cn: BLOW GUN cn2: BLOW GUN cn_clear: BLOWGUN d: Product description Aluminium blow gun long spout The aluminium blow gun operates at 6 bar and has a 1/4" air connection. This aluminium blow gun is ideal for blowing objects clean via compressed air, e.g. desks or tools. The housing is made of aluminium and the 160 mm nozzle is made of steel. Due to the housing, the weight is only 0.18 kilograms, making the blow gun comfortable and light in the hand. Two grommets are supplied with the blow gun, a Euro and Orion grommet. So you can immediately connect the blow gun to your equipment. ds: dsc: kts: Blow gun long with plug-in nipple kpn: 4300011 kpn_dash: kpn_clear: 4300011 bkpn: AIRPRESS 4300011 bkpn_clear: AIRPRESS 4300011 c_path: Home / Tools / Powered tools / Pneumatic tools / Miscellaneous / Blow gun | Home / Our brands / Airpress / Airpress tools / Airpress powered tools / Airpress pneumatic tools / Airpress miscellaneous / Airpress blow gun sr_no_br_cl_ns: 4300011 sr_ns: AIRPRESS4300011
r: 02952872 p: 11.27 pid: 33439 b: AIRPRESS q: 0 st: lt: 1 ean: 8712418004014 sr: AIRPRESS 4300021 sr_no_br: 4300021 sr_no_br_cl: 4300021 sr_cl: AIRPRESS4300021 sr_dash: sold: 822.71 p_range: none type: standard act: 1 avo: 1 av: Connection size 1/4" Max. working pressure 12 bar n: AIRPRESS 4300021 tyre pump with plug-in nipples 12 bar cn: TYRE INFLATOR cn2: TYRE INFLATOR cn_clear: TYREINFLATOR d: Product description Tyre pump with plug-in nipples 12 bar The right tyre pressure is important to be safe on the road. This tyre pump with 35 cm hose works up to 12 bar and is easy to use. Use the lever to pump air into the tyre. Got too much air in the tyre? With the push button, you easily remove air from the tyre again. The tyre pump is made of aluminium and is therefore light in the hand. The package includes two insertion nipples, Orion 6 mm and Euro DN 7.2/7.4. Both nipples have 3/8" female thread. You simply screw these push-in nipples onto the tyre pump. The rubber ring seals it and creates an airtight connection. The pressure gauge is easy to read and is divided into three sectors. Green means there is the right amount of air in the tyre, yellow means slightly too much air in the tyre and red means there is really too much air in the tyre. In the red and yellow sections, you have to let air out of the tyre again until it gets into the green section and has the right tyre pressure. Can I use the tyre inflator to inflate bicycle tyres? It is possible to inflate bicycle tyres with this tyre pump, however, it does not come standard with adapters. These adapters are available separately as a car pump valve to bike valve adapter or the print adapter to go from a car pump to a bike valve. Connecting to the compressor The tyre inflator features a rubber ring for air sealing. But of course, it can happen that the ring gets lost or broken. To make an airtight connection then, use Teflon sealing tape or Thread Sealant 10 ml. Smell teflon sealing tape or Thread sealant 10 ml. ds: dsc: kts: tyre pump with plug-in nipples 12 bar kpn: 4300021 kpn_dash: kpn_clear: 4300021 bkpn: AIRPRESS 4300021 bkpn_clear: AIRPRESS 4300021 c_path: Home / Tools / Powered tools / Pneumatic tools / Miscellaneous / Tyre inflator | Home / Our brands / Airpress / Airpress tools / Airpress powered tools / Airpress pneumatic tools / Airpress miscellaneous / Airpress tyre inflator sr_no_br_cl_ns: 4300021 sr_ns: AIRPRESS4300021
r: 02084645 p: 39.834 pid: 31857 b: AIRPRESS q: 0 st: lt: 5 ean: 8712418006179 sr: AIRPRESS 42048 sr_no_br: 42048 sr_no_br_cl: 42048 sr_cl: AIRPRESS42048 sr_dash: sold: 756.846 p_range: none type: standard act: 1 avo: 1 av: Connection type Hose tail Connection size 1/4" Max. working pressure 12 bar n: AIRPRESS 42048 tyre pump with long hose 75 cm 0-12 bar cn: TYRE INFLATOR cn2: TYRE INFLATOR cn_clear: TYREINFLATOR d: Product description Tyre pump with 75 cm hose Getting on the road safely means having correctly inflated tyres. Not only the car, but also caravan or bicycle tyres need to be at the right pressure for comfort and safety. This tyre pump has a 75 cm long hose, so you can easily reach everywhere. The tyre pump lies well in the hand and is also lightweight. With the push-in nipple, which is attached to the front of the hose, you quickly and easily attach the tyre pump to the wheel. The pressure gauge is protected by the rubber bumper. The working pressure of this tyre pump is between 0 and 12 BAR. The pressure gauge bears the WIKA mark. The pressure gauge is Ø 5.5 cm and you can read the number of BAR and PSI on it. The compartment is divided into green, yellow and red. Green means there is the right amount of air in the tyre, yellow means slightly too much air in it and red means there is too much air in the tyre. In the red and yellow sections, you have to let air out of the tyre again until it is in the green section. Then you can safely hit the road. Connecting to the compressor This tyre pump does not come with a coupling as standard. It features a 1/4" female thread connection size. This makes it easy to connect the tyre inflator to the compressor using a 1/4" male Euro or Orion coupling. To make an airtight connection, use Teflon sealing tape or 50ml thread sealant. Do you also want to use the tyre pump to inflate the bicycle tyre? Then use the car pump valve to bike valve adapter or the print adapter to go from a car pump to a bike valve. ds: dsc: kts: tyre pump with long hose 75 cm 0-12 bar kpn: 42048 kpn_dash: kpn_clear: 42048 bkpn: AIRPRESS 42048 bkpn_clear: AIRPRESS 42048 c_path: Home / Tools / Powered tools / Pneumatic tools / Miscellaneous / Tyre inflator | Home / Our brands / Airpress / Airpress tools / Airpress powered tools / Airpress pneumatic tools / Airpress miscellaneous / Airpress tyre inflator sr_no_br_cl_ns: 42048 sr_ns: AIRPRESS42048
r: 02952851 p: 7.2 pid: 31900 b: AIRPRESS q: 0 st: lt: 4 ean: 8712418224863 sr: AIRPRESS 45021 sr_no_br: 45021 sr_no_br_cl: 45021 sr_cl: AIRPRESS45021 sr_dash: sold: 612 p_range: none type: standard act: 1 avo: 1 av: Connection type Internal thread Version (blow nozzle) Bent Connection size 1/4" Thread type BSPP n: AIRPRESS 45021 Blow gun 10 cm with plug-in nipples cn: BLOW GUN cn2: BLOW GUN cn_clear: BLOWGUN d: Product description Blow gun with rubber nose 10 cm Tools or desks can be cleaned with this blow gun. The blow gun is made of composite, with the nose being made of rubber and the 10 cm handle of steel. The female 1/4" air inlet is made of brass. Due to the composite, the blow gun is light in weight to hold. This increases work enjoyment. The maximum working pressure of the blow gun is 8 bar. To start the job right away, the blow gun will be delivered with two grommets, namely an Orion and a Euro grommet. On these grommets you can connect safety couplings, for example. There are two hooks on it, so you can easily hang the blow gun somewhere. The handle allows you to set the amount of compressed air yourself, by slowly pressing the lever. ds: dsc: kts: Blow gun 10 cm with plug-in nipples kpn: 45021 kpn_dash: kpn_clear: 45021 bkpn: AIRPRESS 45021 bkpn_clear: AIRPRESS 45021 c_path: Home / Tools / Powered tools / Pneumatic tools / Miscellaneous / Blow gun | Home / Our brands / Airpress / Airpress tools / Airpress powered tools / Airpress pneumatic tools / Airpress miscellaneous / Airpress blow gun sr_no_br_cl_ns: 45021 sr_ns: AIRPRESS45021
r: 02084646 p: 58.636 pid: 31884 b: AIRPRESS q: 0 st: lt: 4 ean: 8712418005042 sr: AIRPRESS 47602 sr_no_br: 47602 sr_no_br_cl: 47602 sr_cl: AIRPRESS47602 sr_dash: sold: 469.088 p_range: none type: standard act: 1 avo: 1 av: Connection size 1/4" n: AIRPRESS 47602 tyre pump stick 1/4" internal bicycle/car cn: TYRE INFLATOR cn2: TYRE INFLATOR cn_clear: TYREINFLATOR d: Product description Tyre pump pump stick 1/4 The 1/4" mm tyre pump stick allows you to quickly inflate the tyres of your car or bicycle. The push-in nipple has two sides, one of which is for the car and the other for the bicycle. The push-in nipple is set at 90 degrees on the neck of the pump stick. The handle makes it easy and pleasant to hold the pump stick. The pump stick has a 1/4" connection internally and you can use push-in nipples or safety couplings with 1/4" connection and externally. So you can easily, quickly and safely make an air connection with the hose to the compressor. The head of the push-in nipple has a self-closing system. If you attach the nipple to the tyre valve, no more air will escape. The handle is green, from this you can recognise it. The total length of the pump stick is 26 cm, of which the neck is 10 cm long. ds: dsc: kts: tyre pump stick 1/4" internal bicycle/car kpn: 47602 kpn_dash: kpn_clear: 47602 bkpn: AIRPRESS 47602 bkpn_clear: AIRPRESS 47602 c_path: Home / Tools / Powered tools / Pneumatic tools / Miscellaneous / Tyre inflator | Home / Our brands / Airpress / Airpress tools / Airpress powered tools / Airpress pneumatic tools / Airpress miscellaneous / Airpress tyre inflator sr_no_br_cl_ns: 47602 sr_ns: AIRPRESS47602
r: 02087275 p: 4.9 pid: 31888 b: AIRPRESS q: 0 st: lt: 1 ean: 8712418003871 sr: AIRPRESS 4300001 sr_no_br: 4300001 sr_no_br_cl: 4300001 sr_cl: AIRPRESS4300001 sr_dash: sold: 455.7 p_range: none type: standard act: 1 avo: 1 av: Connection type Internal thread Version (blow nozzle) Straight Connection size 1/4" Thread type BSPP n: AIRPRESS 4300001 blow gun short with plug-in nipples 12 bar cn: BLOW GUN cn2: BLOW GUN cn_clear: BLOWGUN d: Product description Aluminium blow gun short spout The aluminium blow gun features a 1/4" air connection and has a maximum working pressure of 12 bar. This aluminium blow gun is ideal for blowing objects clean via compressed air, e.g. desks or tools. The housing is made of aluminium and the 20 mm nozzle is made of steel. Due to the housing, the weight is only 0.17 kilograms, making the blow gun comfortable and light in the hand. Two insert nipples are supplied with the blow gun, namely a Euro and Type Orion insert nipple. So you can immediately connect the blow gun to your equipment. ds: dsc: kts: blow gun short with plug-in nipples 12 bar kpn: 4300001 kpn_dash: kpn_clear: 4300001 bkpn: AIRPRESS 4300001 bkpn_clear: AIRPRESS 4300001 c_path: Home / Tools / Powered tools / Pneumatic tools / Miscellaneous / Blow gun | Home / Our brands / Airpress / Airpress tools / Airpress powered tools / Airpress pneumatic tools / Airpress miscellaneous / Airpress blow gun sr_no_br_cl_ns: 4300001 sr_ns: AIRPRESS4300001
r: 02705220 p: 10.21 pid: 31897 b: AIRPRESS q: 0 st: lt: 7 ean: 8712418224887 sr: AIRPRESS 45023 sr_no_br: 45023 sr_no_br_cl: 45023 sr_cl: AIRPRESS45023 sr_dash: sold: 183.78 p_range: none type: standard act: 1 avo: 1 av: Connection type Internal thread Version (blow nozzle) Bent Connection size 1/4" Thread type BSPP n: AIRPRESS 45023 blow gun 25 cm with plug-in nipples cn: BLOW GUN cn2: BLOW GUN cn_clear: BLOWGUN d: Product description Blow gun with rubber nose 25 cm The blow gun is made of composite, so its weight is only 1 kilogram. The blowgun lifts pleasantly in the hand due to the composite. On top and just below the handle are two hooks, making it easy to hang the blowgun. The handle is made of steel and is 25 cm long. It comes with two grommets, Euro and Orion, so you can immediately connect your coupling to it. The inlet is made of brass and is 1/4" in size. The blow gun has a working pressure of 8 bar and with the lever you easily regulate the amount of air. The handle has a rubber nose, so that should you bump into something, you don't damage the object straight away. So you can easily clean the desk and/or tools. ds: dsc: kts: blow gun 25 cm with plug-in nipples kpn: 45023 kpn_dash: kpn_clear: 45023 bkpn: AIRPRESS 45023 bkpn_clear: AIRPRESS 45023 c_path: Home / Tools / Powered tools / Pneumatic tools / Miscellaneous / Blow gun | Home / Our brands / Airpress / Airpress tools / Airpress powered tools / Airpress pneumatic tools / Airpress miscellaneous / Airpress blow gun sr_no_br_cl_ns: 45023 sr_ns: AIRPRESS45023
r: 02952852 p: 10.702 pid: 33435 b: AIRPRESS q: 0 st: lt: 4 ean: 8712418224894 sr: AIRPRESS 45024 sr_no_br: 45024 sr_no_br_cl: 45024 sr_cl: AIRPRESS45024 sr_dash: sold: 160.53 p_range: none type: standard act: 1 avo: 1 av: Connection type Internal thread Version (blow nozzle) Bent Connection size 1/4" Thread type BSPP n: AIRPRESS 45024 blow gun 35 cm with plug-in nipples cn: BLOW GUN cn2: BLOW GUN cn_clear: BLOWGUN d: Product description Blow gun with rubber nose 35 cm The blow gun is suitable for cleaning desks, for example. The handle, made of steel, is 35 cm long, so you don't have to bend down all the time. It also allows you to reach more difficult places more easily. The housing is made of composite. Its low weight and composite housing make the blowgun pleasant to hold in your hand. The air inlet is made of brass and is 1/4" in size. The blow gun is also equipped with hooks, so you can easily hang the blow gun somewhere. The blow gun has a working pressure of 8 bar and with the lever you easily regulate the amount of air. A rubber nose is attached to the steel handle for safety to avoid damage. The package comes with a Euro and Orion grommet which fits into the air inlet. ds: dsc: kts: blow gun 35 cm with plug-in nipples kpn: 45024 kpn_dash: kpn_clear: 45024 bkpn: AIRPRESS 45024 bkpn_clear: AIRPRESS 45024 c_path: Home / Tools / Powered tools / Pneumatic tools / Miscellaneous / Blow gun | Home / Our brands / Airpress / Airpress tools / Airpress powered tools / Airpress pneumatic tools / Airpress miscellaneous / Airpress blow gun sr_no_br_cl_ns: 45024 sr_ns: AIRPRESS45024
r: 02831614 p: 10.413 pid: 32448 b: AIRPRESS q: 0 st: lt: 7 ean: 8712418224900 sr: AIRPRESS 45025 sr_no_br: 45025 sr_no_br_cl: 45025 sr_cl: AIRPRESS45025 sr_dash: sold: 114.543 p_range: none type: standard act: 1 avo: 1 av: Connection type Internal thread Version (blow nozzle) Bent Connection size 1/4" Thread type BSPP n: AIRPRESS 45025 blow gun 50 cm with plug-in nipples cn: BLOW GUN cn2: BLOW GUN cn_clear: BLOWGUN d: Product description Blow gun with rubber nose 55 cm If you want to clean your desk, tools or other things on compressor air, you can do so with the blow gun with 55 cm handle. This way you don't have to constantly bend down, but at the same time you can reach hard-to-reach places. The blow gun has a working pressure of 8 bar. The weight of the blow gun is low, as it is made of composite. In addition, the blowgun lies comfortably in the hand. With the handle, you can easily regulate the pressure. The air inlet is made of brass and is 1/4" in size. The air pistol comes with a Euro and Orion grommet, to which, for example, safety couplings can be connected. Should you wish to hang the air gun, it is possible, as the air gun is fitted with hooks. For safety, a rubber nose is attached to the handle to prevent damage. ds: dsc: kts: blow gun 50 cm with plug-in nipples kpn: 45025 kpn_dash: kpn_clear: 45025 bkpn: AIRPRESS 45025 bkpn_clear: AIRPRESS 45025 c_path: Home / Tools / Powered tools / Pneumatic tools / Miscellaneous / Blow gun | Home / Our brands / Airpress / Airpress tools / Airpress powered tools / Airpress pneumatic tools / Airpress miscellaneous / Airpress blow gun sr_no_br_cl_ns: 45025 sr_ns: AIRPRESS45025
