r: 57110482 p: 18.016 pid: 41631 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 03134375451727 sr: 3M - SCOTCH-BRITE 7100182579 sr_no_br: 7100182579 sr_no_br_cl: 7100182579 sr_cl: 3MSCOTCHBRITE7100182579 sr_dash: 3M sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 200 mm Thickness 13 mm (Disc) attachment Thread Perforated No For material Varnish Series Scotch-Brite Grit size Extra coarse n: 3M - SCOTCH-BRITE 61163 Clean & Strip disc CG-DC, 200 mm x 13 mm, S XCS - 7100182579 cn: SANDING DISC cn2: SANDING DISC cn_clear: SANDINGDISC d: Product description Easily get into tight corners for complete cleaning, removal of old paint layers and surface preparation Cover a larger area than with wire brushes Uses extra coarse silicon carbide for aggressive cutting and a finer finish than with wire brushes Full run and heat resistance ensures extra-long operation and consistent finish results over the life of the disc Lubricant-resistant non-woven material allows the disc to wear evenly throughout its life The Scotch-Brite Clean and Strip Disc is specially designed to effectively smooth away weld seams and remove rust and old layers of paint. Our extra coarse discs with an open web offer a smooth-running full wheel that is ideal for removing soft coatings. For a superior finish, use Scotch-Brite Clean and Strip disc. Our non-woven discs offer a safe alternative to wire brushes to effectively eliminate welds and remove rust and old paint layers. They cover a wider area and deliver finer results that may eliminate the need for subsequent finishing steps. Scotch-Brite Clean and Strip discs use a sharp, synthetic, extra coarse silicon carbide abrasive grain, typically used in low-pressure applications such as paint preparation. It breaks down faster than aluminium oxide, for a superior finish. Our Scotch-Brite industrial abrasives are unique surface conditioning products. We combine them with non-woven nylon or other synthetic fibres to create a system that delivers consistent results throughout the product life. The discs are perfect for removing soft coatings. The open material, together with the aggressive abrasive mineral, gives a smooth-running wheel that is full-flow resistant. Because the fibres do not clog so easily, the abrasive minerals maintain their high cutting performance. Suggested applications Work away welds and remove rust and old paint layers in all kinds of applications ds: dsc: kts: Clean & Strip disc CG-DC, 200 mm x 13 mm, S XCS kpn: 61163 kpn_dash: kpn_clear: 61163 bkpn: 3M - SCOTCH-BRITE 61163 bkpn_clear: 3M - SCOTCH-BRITE 61163 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite sanding disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7100182579 sr_ns: 3M-SCOTCH-BRITE7100182579
r: 57110389 p: 16.859 pid: 41653 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 04054596091825 sr: 3M - SCOTCH-BRITE 7000077904 sr_no_br: 7000077904 sr_no_br_cl: 7000077904 sr_cl: 3MSCOTCHBRITE7000077904 sr_dash: 3M sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 75 mm Grit size Medium Connection type (machine) Roloc+ Width 35 mm n: 3M - SCOTCH-BRITE 9702 Roloc+ Cut & Polish blade brush PF-ZR, 75 mm x 35 mm, A MED - 7000077904 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description Aluminium oxide minerals easily removes bumps and helps you work faster Easy attachment Heavy-duty design extends service life Open-web construction resists flooding and heating for a consistent finish Open web adapts to the substrate to minimise grooves Scotch-Brite Roloc Cut and pPolish Flap brushes use a unique technology using non-woven technology. The blade brush provides a uniquely smooth and polished finish Use the Scotch-Brite Roloc Cut and Polish Flap Brush for deburring, polishing and finishing a variety of substrates in wood and metalworking. We make our brushes with aluminium oxide mineral, a sharp-cutting and durable abrasive material that continuously self-breaks during use to expose new cutting edges and provide a smooth consistent finish - unlike traditional abrasive materials, such as garnet, which wear out quickly with use. Its high cutting speed, hardness, strength and low heat retention make aluminium oxide mineral ideal for sanding and finishing applications. Can be used for numerous substrates in both wood and metalworking, including ferroalloys. Scotch-Brite Roloc Cut and Polish Flap brushes are designed to adapt to the substrate, making them a good option for machining inside diameters and smoothing out surface imperfections. The open, flexible blade construction makes the brush soft and pliable, helping to achieve an even finish. Our brushes give a smooth consistent finish without the risk of overworking or damaging the part. ds: dsc: kts: Roloc+ Cut & Polish blade brush PF-ZR, 75 mm x 35 mm, A MED kpn: 9702 kpn_dash: kpn_clear: 9702 bkpn: 3M - SCOTCH-BRITE 9702 bkpn_clear: 3M - SCOTCH-BRITE 9702 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite flap wheel sr_no_br_cl_ns: 7000077904 sr_ns: 3M-SCOTCH-BRITE7000077904
r: 57110382 p: 15.537 pid: 41646 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 54001895836577 sr: 3M - SCOTCH-BRITE 7000077912 sr_no_br: 7000077912 sr_no_br_cl: 7000077912 sr_cl: 3MSCOTCHBRITE7000077912 sr_dash: 3M sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 63 mm Grit size 80 Connection type (machine) Roloc+ Width 32 mm n: 3M - SCOTCH-BRITE 9717 Roloc+ Combi blade brush CB-ZR, 63 mm x 32 mm, P80 - 7000077912 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description Blending scratches on stainless steel; fine finish aluminium prior to anodising Leads to a burr-free finish Combines the cutting action of coated abrasives with the finishing action of Scotch-Brite non-woven abrasives Combines cutting and finishing operations This wheel is a unique combination of alumina-coated abrasives and Scotch-Brite. They are designed for a wide range of finishes. Use the 3M Roloc Combi Flap Brush for removing scratches on stainless steel and fine finishing aluminium before anodising it. Our discs can be used wet or dry in a range of applications, including getting rid of scratches on stainless steel and fine finishing aluminium before anodising. They leave a finish without burrs. They combine the cutting action of coated abrasives with the finishing of Scotch-Brite non-woven abrasives. ds: dsc: kts: Roloc+ Combi blade brush CB-ZR, 63 mm x 32 mm, P80 kpn: 9717 kpn_dash: kpn_clear: 9717 bkpn: 3M - SCOTCH-BRITE 9717 bkpn_clear: 3M - SCOTCH-BRITE 9717 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 7000077912 sr_ns: 3M-SCOTCH-BRITE7000077912
r: 03044066 p: 15.537 pid: 177687 b: 3M - SCOTCH-BRITE q: 0 st: lt: 5 ean: 4054596628038 sr: 3M - SCOTCH-BRITE 7100192335 sr_no_br: 7100192335 sr_no_br_cl: 7100192335 sr_cl: 3MSCOTCHBRITE7100192335 sr_dash: 3M sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 125 mm (Disc) attachment Thread Bore size 14 mm Perforated No For material Metal; Paint Grit size 60 n: 3M - SCOTCH-BRITE 51891 Clean and Strip disc XT-RD Pro, M14, 125 mm, S XCRS - 7100192335 cn: SANDING DISC cn2: SANDING DISC cn_clear: SANDINGDISC d: Product description Quickly removes rust, paint, mill scale and coatings from metal High-quality fibres resist crumbling and perform well on edges High degree of formability ensures larger contact area and faster material removal Silicon carbide-based abrasive provides intensive cutting action with a fine finish Resistant to flooding for consistent cutting action Scotch-Brite Clean & Strip XT Pro Disc contains a silicon carbide-based abrasive mineral embedded in an open nylon web structure. Our discs effectively remove rust, paint, mill scale, coatings and adhesives from surfaces without dramatically altering the base material. You can have greater formability without compromising strength when preparing metal surfaces or removing rust and paint with Scotch-Brite Clean & Strip XT Pro Disc. Our discs feature a combination of innovated fibre threads, resin and a silicon carbide-based abrasive mineral to form a thick, open web. The elastic nature of the fibres means that these discs can follow the contours of the workpiece with greater precision to achieve a larger contact area for faster material removal. They adapt to welds so that they can be sanded without removal, and they allow access to hard-to-reach areas without damaging the substrate. Silicon carbide cuts more intensely, ensuring a fine finish. Unwanted burrs, dirt and contaminants are effectively removed while at the same time maintaining the geometry of the workpiece, reducing the need for extra work and increasing productivity. Moreover, the abrasive can escape through holes in the web, reducing clogging of the abrasive. The disc's reinforcing resin is gradually broken down through use to release new fibres and super-sharp silicon carbide-based abrasive material, ensuring consistent cutting action over the life of the disc. The high-quality fibres resist chipping and perform well on edges. These discs also provide low vibration and reduced sparks, operate at high speed and boast a long service life. Suggested applications Removing rust, paint, mill scale, coatings and adhesive residues and surface preparation Ideal for applications under light pressure ds: dsc: kts: Clean and Strip disc XT-RD Pro, M14, 125 mm, S XCRS kpn: 51891 kpn_dash: kpn_clear: 51891 bkpn: 3M - SCOTCH-BRITE 51891 bkpn_clear: 3M - SCOTCH-BRITE 51891 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite sanding disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7100192335 sr_ns: 3M-SCOTCH-BRITE7100192335
r: 57110384 p: 15.537 pid: 41604 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 54001895836591 sr: 3M - SCOTCH-BRITE 7000077939 sr_no_br: 7000077939 sr_no_br_cl: 7000077939 sr_cl: 3MSCOTCHBRITE7000077939 sr_dash: 3M sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 63 mm Grit size 180 Connection type (machine) Roloc+ Width 32 mm n: 3M - SCOTCH-BRITE 9723 Roloc+ Combi blade brush CB-ZR, 63 mm x 32 mm, grit 180 - 7000077939 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description Blending scratches on stainless steel; fine finish aluminium prior to anodising Leads to a burr-free finish Combines the cutting action of coated abrasives with the finishing action of Scotch-Brite non-woven abrasives Combines cutting and finishing operations This wheel is a unique combination of alumina-coated abrasives and Scotch-Brite. They are designed for a wide range of finishes. Use the 3M Roloc Combi Flap Brush for removing scratches on stainless steel and fine finishing aluminium before anodising it. Our discs can be used wet or dry in a range of applications, including getting rid of scratches on stainless steel and fine finishing aluminium before anodising. They leave a finish without burrs. They combine the cutting action of coated abrasives with the finishing of Scotch-Brite non-woven abrasives. ds: dsc: kts: Roloc+ Combi blade brush CB-ZR, 63 mm x 32 mm, grit 180 kpn: 9723 kpn_dash: kpn_clear: 9723 bkpn: 3M - SCOTCH-BRITE 9723 bkpn_clear: 3M - SCOTCH-BRITE 9723 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 7000077939 sr_ns: 3M-SCOTCH-BRITE7000077939
r: 57110400 p: 14.834 pid: 41005 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 08711428030433 sr: 3M - SCOTCH-BRITE 7100093987 sr_no_br: 7100093987 sr_no_br_cl: 7100093987 sr_cl: 3MSCOTCHBRITE7100093987 sr_dash: 3M sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 75 mm Grit size Coarse Connection size (machine) 6 mm Connection type (machine) Shank Width 45 mm n: 3M - SCOTCH-BRITE 7213 Clean & Finish blade brush on pen FF-ZS red, 75 mm x 45 m x 6 mm, A CRS - 7100093987 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description With a fine, matt sanding pattern that provides a finer finish than that of a combination wheel Designed for use on all metals Gives an even finish to workpieces without leaving vibration damage Suitable for light deburring Scotch-Brite Blade brushes on spindle are made of blades of non-woven material attached to a spindle. Our brushes offer a fine, matt sanding pattern. Use the Scotch-Brite Flap Brush on Ash for a fine, even finish on a variety of metal workpieces, without vibration damage. The fine, matt scratch pattern of our on shaft flap brushes provides a finer finish compared to a combi wheel. ds: dsc: kts: Clean & Finish blade brush on pen FF-ZS red, 75 mm x 45 m x 6 mm, A CRS kpn: 7213 kpn_dash: kpn_clear: 7213 bkpn: 3M - SCOTCH-BRITE 7213 bkpn_clear: 3M - SCOTCH-BRITE 7213 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite flap wheel sr_no_br_cl_ns: 7100093987 sr_ns: 3M-SCOTCH-BRITE7100093987
r: 57110403 p: 14.71 pid: 43121 b: 3M - SCOTCH-BRITE q: 0 st: lt: 18 ean: 04046719750771 sr: 3M - SCOTCH-BRITE 7100093995 sr_no_br: 7100093995 sr_no_br_cl: 7100093995 sr_cl: 3MSCOTCHBRITE7100093995 sr_dash: 3M sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 100 mm Grit size Fine Connection size (machine) 6 mm Connection type (machine) Shank Width 45 mm n: 3M - SCOTCH-BRITE 7216 Clean & Finish blade brush on pin FF-ZS grey, 100 mm x 45 mm x 6 mm, S SFN - 7100093995 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description With a fine, matt sanding pattern that provides a finer finish than that of a combination wheel Designed for use on all metals Gives an even finish to workpieces without leaving vibration damage Suitable for light deburring Scotch-Brite Blade brushes on spindle are made of blades of non-woven material attached to a spindle. Our brushes offer a fine, matt sanding pattern. Use the Scotch-Brite Flap Brush on Ash for a fine, even finish on a variety of metal workpieces, without vibration damage. The fine, matt scratch pattern of our on shaft flap brushes provides a finer finish compared to a combi wheel. ds: dsc: kts: Clean & Finish blade brush on pin FF-ZS grey, 100 mm x 45 mm x 6 mm, S SFN kpn: 7216 kpn_dash: kpn_clear: 7216 bkpn: 3M - SCOTCH-BRITE 7216 bkpn_clear: 3M - SCOTCH-BRITE 7216 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite flap wheel sr_no_br_cl_ns: 7100093995 sr_ns: 3M-SCOTCH-BRITE7100093995
r: 03058678 p: 14.214 pid: 41547 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 04054596651968 sr: 3M - SCOTCH-BRITE 7100192333 sr_no_br: 7100192333 sr_no_br_cl: 7100192333 sr_cl: 3MSCOTCHBRITE7100192333 sr_dash: 3M sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 115 mm (Disc) attachment Bore hole Bore size 22,2 mm Perforated No For material Metal; Paint Series Scotch-Brite Grit size Extra coarse n: 3M - SCOTCH-BRITE 51880 Clean and Strip disc XT-DB Pro, 115 mm x 22 mm, S XCRS - 7100192333 cn: SANDING DISC cn2: SANDING DISC cn_clear: SANDINGDISC d: Product description Quickly removes rust, paint, mill scale and coatings from metal High-quality fibres resist crumbling and perform well on edges High degree of formability ensures larger contact area and faster material removal Silicon carbide-based abrasive provides intensive cutting action with a fine finish Resistant to flooding for consistent cutting action Scotch-Brite Clean & Strip XT Pro Disc contains a silicon carbide-based abrasive mineral embedded in an open nylon web structure. Our discs effectively remove rust, paint, mill scale, coatings and adhesives from surfaces without dramatically altering the base material. You can have greater formability without compromising strength when preparing metal surfaces or removing rust and paint with Scotch-Brite Clean & Strip XT Pro Disc. Our discs feature a combination of innovated fibre threads, resin and a silicon carbide-based abrasive mineral to form a thick, open web. The elastic nature of the fibres means these discs can follow the contours of the workpiece with greater precision to achieve a larger contact area for faster material removal. They adapt to welds so that they can be sanded without removal, and they allow access to hard-to-reach areas without damaging the substrate. Silicon carbide cuts more intensely, ensuring a fine finish. Unwanted burrs, dirt and contaminants are effectively removed while at the same time maintaining the geometry of the workpiece, reducing the need for extra work and increasing productivity. Moreover, the abrasive can escape through holes in the web, reducing clogging of the abrasive. The disc's reinforcing resin is gradually broken down through use to release new fibres and super-sharp silicon carbide-based abrasive material, ensuring consistent cutting action over the life of the disc. The high-quality fibres resist chipping and perform well on edges. These discs also provide low vibration and reduced sparks, operate at high speed and feature a long service life. Suggested applications Removing rust, paint, mill scale, coatings and adhesive residues and surface preparation Ideal for applications under light pressure ds: dsc: kts: Clean and Strip disc XT-DB Pro, 115 mm x 22 mm, S XCRS kpn: 51880 kpn_dash: kpn_clear: 51880 bkpn: 3M - SCOTCH-BRITE 51880 bkpn_clear: 3M - SCOTCH-BRITE 51880 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite sanding disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7100192333 sr_ns: 3M-SCOTCH-BRITE7100192333
r: 03020670 p: 14.008 pid: 166665 b: 3M - SCOTCH-BRITE q: 30 st: 1 lt: 1 ean: 04054596628014 sr: 3M - SCOTCH-BRITE 7100192331 sr_no_br: 7100192331 sr_no_br_cl: 7100192331 sr_cl: 3MSCOTCHBRITE7100192331 sr_dash: 3M sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 125 mm (Disc) attachment Bore hole Bore size 22 mm Perforated No For material Metal; Varnish Grit size 60 n: 3M - SCOTCH-BRITE 51890 Clean and Strip disc XT-DB Pro, 125 mm x 22 mm, S XCRS - 7100192331 cn: SANDING DISC cn2: SANDING DISC cn_clear: SANDINGDISC d: Product description Quickly removes rust, paint, mill scale and coatings from metal High-quality fibres resist crumbling and perform well on edges High degree of formability ensures larger contact area and faster material removal Silicon carbide-based abrasive provides intensive cutting action with a fine finish Resistant to flooding for consistent cutting action Scotch-Brite Clean & Strip XT Pro Disc contains a silicon carbide-based abrasive mineral embedded in an open nylon web structure. Our discs effectively remove rust, paint, mill scale, coatings and adhesives from surfaces without dramatically altering the base material. You can have greater formability without compromising strength when preparing metal surfaces or removing rust and paint with Scotch-Brite Clean & Strip XT Pro Disc. Our discs feature a combination of innovated fibre threads, resin and a silicon carbide-based abrasive mineral to form a thick, open web. The elastic nature of the fibres means these discs can follow the contours of the workpiece with greater precision to achieve a larger contact area for faster material removal. They adapt to welds so that they can be sanded without removal, and they allow access to hard-to-reach areas without damaging the substrate. Silicon carbide cuts more intensely, ensuring a fine finish. Unwanted burrs, dirt and contaminants are effectively removed while at the same time maintaining the geometry of the workpiece, reducing the need for extra work and increasing productivity. Moreover, the abrasive can escape through holes in the web, reducing clogging of the abrasive. The disc's reinforcing resin is gradually broken down through use to release new fibres and super-sharp silicon carbide-based abrasive material, ensuring consistent cutting action over the life of the disc. The high-quality fibres resist chipping and perform well on edges. These discs also provide low vibration and reduced sparks, operate at high speed and boast a long service life. Suggested applications Removing rust, paint, mill scale, coatings and adhesive residues and surface preparation Ideal for applications under light pressure ds: dsc: kts: Clean and Strip disc XT-DB Pro, 125 mm x 22 mm, S XCRS kpn: 51890 kpn_dash: kpn_clear: 51890 bkpn: 3M - SCOTCH-BRITE 51890 bkpn_clear: 3M - SCOTCH-BRITE 51890 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite sanding disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7100192331 sr_ns: 3M-SCOTCH-BRITE7100192331
r: 57110383 p: 13.553 pid: 41650 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 54001895836607 sr: 3M - SCOTCH-BRITE 7000077906 sr_no_br: 7000077906 sr_no_br_cl: 7000077906 sr_cl: 3MSCOTCHBRITE7000077906 sr_dash: 3M sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 63 mm Grit size 120 Connection type (machine) Roloc+ Width 320 mm n: 3M - SCOTCH-BRITE 9720 Roloc+ Combi blade brush CB-ZR, 63 mm x 32 mm, grit 120 - 7000077906 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description Blending scratches on stainless steel; fine finish aluminium prior to anodising Leads to a burr-free finish Combines the cutting action of coated abrasives with the finishing action of Scotch-Brite non-woven abrasives Combines cutting and finishing operations This wheel is a unique combination of alumina-coated abrasives and Scotch-Brite. They are designed for a wide range of finishes. Use the 3M Roloc Combi Flap Brush for removing scratches on stainless steel and fine finishing aluminium before anodising it. Our discs can be used wet or dry in a range of applications, including getting rid of scratches on stainless steel and fine finishing aluminium before anodising. They leave a finish without burrs. They combine the cutting action of coated abrasives with the finishing of Scotch-Brite non-woven abrasives. ds: dsc: kts: Roloc+ Combi blade brush CB-ZR, 63 mm x 32 mm, grit 120 kpn: 9720 kpn_dash: kpn_clear: 9720 bkpn: 3M - SCOTCH-BRITE 9720 bkpn_clear: 3M - SCOTCH-BRITE 9720 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 7000077906 sr_ns: 3M-SCOTCH-BRITE7000077906
r: 57111152 p: 13.057 pid: 45969 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 08711428030532 sr: 3M - SCOTCH-BRITE 7000077899 sr_no_br: 7000077899 sr_no_br_cl: 7000077899 sr_cl: 3MSCOTCHBRITE7000077899 sr_dash: 3M sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 63 mm Width 32 mm Connection type (machine) Roloc+ n: 3M - SCOTCH-BRITE 9708 Roloc+ Clean & Finish blade brush FF-ZR, 63 mm x 32 mm, S FIN - 7000077899 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description Provides more surface contact than bristled brushes Ensures consistently fresh abrasive material for a consistent and even finish Soft and malleable for even surface treatment without vibration damage The non-woven web is resistant to flooding and heat Can be used on a variety of substrates, including wood, metal and lacquer Use the Scotch-Brite Clean and Finish Flap Brush for an even cut and finish throughout the life of the product. Our Clean and Finish Flap Brushes feature an abrasive mineral bonded to a fibre core. Scotch-Brite Clean and Finish Flap Brushes feature an abrasive mineral bonded to a fibre core. Our clean and finish blade brushes provide an even cut and finish throughout the product's life. The open construction with flexible slats is soft and pliable to produce an even surface finish without vibration damage. The non-woven web is resistant to flooding and heat. Suitable for cleaning and light deburring of various substrates, providing a matt-gloss finish on metals, levelling wood prior to painting and removing pits from primer prior to application of final coat. ds: dsc: kts: Roloc+ Clean & Finish blade brush FF-ZR, 63 mm x 32 mm, S FIN kpn: 9708 kpn_dash: kpn_clear: 9708 bkpn: 3M - SCOTCH-BRITE 9708 bkpn_clear: 3M - SCOTCH-BRITE 9708 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 7000077899 sr_ns: 3M-SCOTCH-BRITE7000077899
r: 57111154 p: 12.231 pid: 47086 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 04054596207042 sr: 3M - SCOTCH-BRITE 7100093976 sr_no_br: 7100093976 sr_no_br_cl: 7100093976 sr_cl: 3MSCOTCHBRITE7100093976 sr_dash: 3M sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 75 mm Connection type (machine) Roloc+ Width 35 mm n: 3M - SCOTCH-BRITE 9892 Roloc+ mini brush MS-ZR, MS-ZR, white, 75 mm x 35 mm, Type T - 7100093976 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description Low density and very fine coarseness of abrasive material provide brushed surfaces without the use of compounds Provides more surface contact than bristled brushes Ensures constantly fresh abrasive material for a consistent and even finish Non-woven web resists flooding and heat, providing fine finishing results on a variety of materials Provides a decorative finish on metal, wood and composites The Scotch-Brite Type T Blade Brush is made of pieces of non-woven material split lengthwise and glued to a cylindrical core. Our brush uses an aluminium silicate abrasive mineral that is long-lasting and offers consistency and control in various types of preparation and finishing tasks. Use the Scotch-Brite Roloc Type T Flap Brush for many types of preparation and finishing tasks on a wide range of materials, including wood, copper, brass, stainless steel and aluminium. Our flap brush uses an aluminium silicate-based abrasive material and requires no chemical ingredients to achieve fine finishes. It is ideal for all aesthetic finishing applications, such as brushed finishes on copper, brass, stainless steel, aluminium and other metals. Use it for smoothing wood fibres, stripping wood, plastic and composite surfaces and sanding sealant. ds: dsc: kts: Roloc+ mini brush MS-ZR, MS-ZR, white, 75 mm x 35 mm, Type T kpn: 9892 kpn_dash: kpn_clear: 9892 bkpn: 3M - SCOTCH-BRITE 9892 bkpn_clear: 3M - SCOTCH-BRITE 9892 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 7100093976 sr_ns: 3M-SCOTCH-BRITE7100093976
r: 57111153 p: 11.9 pid: 45447 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 08711428030525 sr: 3M - SCOTCH-BRITE 7000077921 sr_no_br: 7000077921 sr_no_br_cl: 7000077921 sr_cl: 3MSCOTCHBRITE7000077921 sr_dash: 3M sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 63 mm Connection type (machine) Roloc+ Width 32 mm n: 3M - SCOTCH-BRITE 9705 Roloc+ Clean & Finish blade brush FF-ZR, 63 mm x 32 mm, A VFN - 7000077921 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description Provides more surface contact than bristled brushes Ensures consistently fresh abrasive material for a consistent and even finish Soft and malleable for even surface treatment without vibration damage The non-woven web is resistant to flooding and heat Can be used on a variety of substrates, including wood, metal and lacquer Use the Scotch-Brite Clean and Finish Flap Brush for an even cut and finish throughout the life of the product. Our Clean and Finish Flap Brushes feature an abrasive mineral bonded to a fibre core. Scotch-Brite Clean and Finish Flap Brushes feature an abrasive mineral bonded to a fibre core. Our clean and finish blade brushes provide an even cut and finish throughout the product's life. The open construction with flexible slats is soft and pliable to produce an even surface finish without vibration damage. The non-woven web is resistant to flooding and heat. Suitable for cleaning and light deburring of various substrates, providing a matt-gloss finish on metals, levelling wood prior to painting and removing pits from primer prior to application of final coat. ds: dsc: kts: Roloc+ Clean & Finish blade brush FF-ZR, 63 mm x 32 mm, A VFN kpn: 9705 kpn_dash: kpn_clear: 9705 bkpn: 3M - SCOTCH-BRITE 9705 bkpn_clear: 3M - SCOTCH-BRITE 9705 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 7000077921 sr_ns: 3M-SCOTCH-BRITE7000077921
r: 57111144 p: 11.82 pid: 47076 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 00048011171951 sr: 3M - SCOTCH-BRITE 7000028470 sr_no_br: 7000028470 sr_no_br_cl: 7000028470 sr_cl: 3MSCOTCHBRITE7000028470 sr_dash: 3M sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 76,2 mm (Disc) attachment TR roloc Bore size Perforated No For material Metal; Plastic Series Scotch-Brite Grit size Coarse n: 3M - SCOTCH-BRITE 17195 Roloc EXL Unitised Wheel XL-DR, 76 mm x 6 mm, 8A CRS - 7000028470 cn: SANDING DISC cn2: SANDING DISC cn_clear: SANDINGDISC d: Product description Unique construction allows for effective edge deburring and finishing The hard density offers good edge retention, which maintains consistent shape and cutting power Soft density offers deformability and flexibility for finishing flat or irregular surfaces without damaging the workpiece Open-web construction with uniform grain distribution and consistent cutting force 3M Roloc fastening system offers quick and easy disc changes Scotch-Brite Roloc Unitised Disc XL-DR is strong and effective for deburring and finishing. Our wheel performs well on a variety of metals in different applications where close tolerances are important. Scotch-Brite Roloc EXL unitised wheels perform well on a variety of metalworking applications and on milled parts with tight tolerances. Use our wheels for professional results when polishing welds, deburring aircraft parts or blending and finishing various metals, plastics and composites. The wheels are available in different coarsenesses, from fine to medium and coarse. They are made of high-density EXL material. This provides a hard structure and aggressive cutting power, making them great for deburring edges and corners without damaging the part. Lower-density versions are soft and deformable, making them suitable for finishing curved surfaces. Discs with the Roloc quick-change system can be quickly and easily attached to a Roloc disc pad*. This allows you to easily switch between different tasks or steps in a finishing process. The Roloc system provides a secure attachment even in heavy-duty applications, and the wide range of 3M Roloc discs allows the user to change discs - and applications - in seconds. The discs allow you to use both the edge and surface of the wheel without the fastening mechanism getting in the way. Scotch-Brite's surface finishing products consist of an abrasive material in non-woven nylon or synthetic fibres. Combining abrasive minerals with fibres creates an abrasive system that delivers consistent results throughout the life of the product. The open web structure of the material ensures a lower operating temperature and less risk of discolouration and deformation of parts. The fibres do not fill up easily and ensure the powerful performance of the mineral abrasive by preventing fibre flooding. This also extends the life of the disc. Suggested applications For a wide range of metalworking applications For polishing welds, deburring aircraft parts or blending and finishing various metals, plastics and composites ds: dsc: kts: Roloc EXL Unitised Wheel XL-DR, 76 mm x 6 mm, 8A CRS kpn: 17195 kpn_dash: kpn_clear: 17195 bkpn: 3M - SCOTCH-BRITE 17195 bkpn_clear: 3M - SCOTCH-BRITE 17195 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite sanding disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7000028470 sr_ns: 3M-SCOTCH-BRITE7000028470
r: 57111151 p: 11.735 pid: 45966 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 08711428030501 sr: 3M - SCOTCH-BRITE 7000077926 sr_no_br: 7000077926 sr_no_br_cl: 7000077926 sr_cl: 3MSCOTCHBRITE7000077926 sr_dash: 3M sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 50 mm Connection type (machine) Roloc+ Width 25 mm n: 3M - SCOTCH-BRITE 9704 Roloc+ Clean & Finish blade brush FF-ZR, 50 mm x 25 mm, A VFN - 7000077926 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description Provides more surface contact than bristled brushes Ensures consistently fresh abrasive material for a consistent and even finish Soft and malleable for even surface treatment without vibration damage The non-woven web is resistant to flooding and heat Can be used on a variety of substrates, including wood, metal and lacquer Use the Scotch-Brite Clean and Finish Flap Brush for an even cut and finish throughout the life of the product. Our Clean and Finish Flap Brushes feature an abrasive mineral bonded to a fibre core. Scotch-Brite Clean and Finish Flap Brushes feature an abrasive mineral bonded to a fibre core. Our clean and finish blade brushes provide an even cut and finish throughout the product's life. The open construction with flexible slats is soft and pliable to produce an even surface finish without vibration damage. The non-woven web is resistant to flooding and heat. Suitable for cleaning and light deburring of various substrates, providing a matt-gloss finish on metals, levelling wood prior to painting and removing pits from primer prior to application of final coat. ds: dsc: kts: Roloc+ Clean & Finish blade brush FF-ZR, 50 mm x 25 mm, A VFN kpn: 9704 kpn_dash: kpn_clear: 9704 bkpn: 3M - SCOTCH-BRITE 9704 bkpn_clear: 3M - SCOTCH-BRITE 9704 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 7000077926 sr_ns: 3M-SCOTCH-BRITE7000077926
r: 57111163 p: 11.45 pid: 47089 b: 3M - SCOTCH-BRITE q: 0 st: lt: 4 ean: 04054596535947 sr: 3M - SCOTCH-BRITE 7100093982 sr_no_br: 7100093982 sr_no_br_cl: 7100093982 sr_cl: 3MSCOTCHBRITE7100093982 sr_dash: 3M sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 50 mm Grit size Medium Connection size (machine) 6 mm Connection type (machine) Shank Width 25 mm n: 3M - SCOTCH-BRITE 7219 Cut & Polish blade brush on stylus PF-ZS, maroon, 50 mm x 25 mm x 6 mm, A MED - 7100093982 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description With a fine, matt sanding pattern that provides a finer finish than that of a combination wheel Designed for use on all metals Gives an even finish to workpieces without leaving vibration damage Suitable for light deburring Scotch-Brite Blade brushes on spindle are made of blades of non-woven material attached to a spindle. Our brushes offer a fine, matt sanding pattern. Use the Scotch-Brite Flap Brush on Ash for a fine, even finish on a variety of metal workpieces, without vibration damage. The fine, matt scratch pattern of our on shaft flap brushes provides a finer finish compared to a combi wheel. ds: dsc: kts: Cut & Polish blade brush on stylus PF-ZS, maroon, 50 mm x 25 mm x 6 mm, A MED kpn: 7219 kpn_dash: kpn_clear: 7219 bkpn: 3M - SCOTCH-BRITE 7219 bkpn_clear: 3M - SCOTCH-BRITE 7219 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 7100093982 sr_ns: 3M-SCOTCH-BRITE7100093982
r: 57110492 p: 11.14 pid: 41672 b: 3M - SCOTCH-BRITE q: 14 st: 1 lt: 1 ean: 04046719751051 sr: 3M - SCOTCH-BRITE 7000077972 sr_no_br: 7000077972 sr_no_br_cl: 7000077972 sr_cl: 3MSCOTCHBRITE7000077972 sr_dash: 3M sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 115 mm (Disc) attachment Hook and loop Bore size 22,2 mm Perforated No For material Stainless steel; Steel; Aluminium; Wood; Plastic Series Scotch-Brite Grit size Extra coarse n: 3M - SCOTCH-BRITE 61174 Clean & Strip disc CG-RD, 115 mm x 22 mm, S XCRS - 7000077972 cn: SANDING DISC cn2: SANDING DISC cn_clear: SANDINGDISC d: Product description For quick removal of coatings, rust and paint Non-woven material aggressively removes coating without damaging the base material. Prevents the need for additional cleaning work on the treated surface. Safe for the user Roloc attachment system allows quick and easy disc changes in multi-step finishing processes Aggressively removes paint and rust from most substrates without damaging the workpiece Well-suited for use in hard-to-reach areas. 3-dimensional web that can withstand loads. Safer than steel brushes. Use the Scotch-Brite Roloc Clean and Strip disc to aggressively remove paint and rust from seams, door jambs, trim and pinch welds and other tight places. Our XT discs feature the Roloc mounting system for quick and easy disc changes: ideal in multi-step finishing processes. The disc is quickly mounted on holder and pad* which is then attached to abrasive tools such as straight grinders and angle grinders. The discs bind silicon carbide mineral and non woven nylon fibres using a resin that dissolves and breaks down over time, keeping the abrasive strong and heat-resistant. Silicon carbide is a very sharp synthetic abrasive generally used in low-pressure applications such as paint preparation. The material breaks down faster than aluminium oxide, for a superior finish. The extra coarse (XCS) mineral works hard to remove unwanted corrosion and imperfections from various substrates. It aggressively removes paint and rust from seams, door jambs, drip rails, pinch welds and other hard-to-reach areas. The non-woven technology makes Scotch-Brite industrial abrasives unique. We combine strands, synthetic resin and abrasive mineral to form a thick, open web. The springy property of the fibres responds to contours and effectively removes unwanted burrs, dirt and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and increases productivity. The abrasive can escape through holes in the web, preventing particles from clogging the mineral. Fibres in the web constantly break down during use so that fresh minerals are exposed. This ensures exceptional consistency, superior cutting performance and extremely long service life. From aesthetic finishing to blending welds, deburring and more: Scotch-Brite abrasives work quickly and deliver consistent results, part after part. *Sold separately ds: dsc: kts: Clean & Strip disc CG-RD, 115 mm x 22 mm, S XCRS kpn: 61174 kpn_dash: kpn_clear: 61174 bkpn: 3M - SCOTCH-BRITE 61174 bkpn_clear: 3M - SCOTCH-BRITE 61174 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite sanding disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7000077972 sr_ns: 3M-SCOTCH-BRITE7000077972
