r: 02886422 p: 2.28 pid: 40865 b: 3M q: 0 st: lt: 8 ean: 05902658109225 sr: 3M 7100139216 sr_no_br: 7100139216 sr_no_br_cl: 7100139216 sr_cl: 3M7100139216 sr_dash: sold: 1482 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 100 mm Connection size (disc) 10 mm Connection type (disc) Bore For material Steel; Stainless steel Shape (cutting disc) Flat Series SILVER Thickness 1 mm n: 3M 51774 Silver cut-off wheel, T41, 100 mm x 1 mm x 10 mm - 7100139216 cn: CUTTING DISC cn2: CUTTING DISC cn_clear: CUTTINGDISC d: Product description Quickly cuts through metal pipes, tubes, flat sheets and more. 3M Precision Shaped Grain grinds exceptionally fast, helping to increase productivity Long-lasting disc offers excellent performance and value Can be used on numerous substrates, including carbon steel and stainless steel Works with tools and accessories designed for cut-off wheels The 3M Silver cut-off wheel is designed to deliver an unbeatable combination of performance and value. It cuts quickly through metal pipes, tubes and flat sheets. The durable disc uses our Precision Shaped Grain for fast, consistent cutting action. Achieve fast, consistent cutting action with the 3M Silver cut-off wheel suitable for numerous applications. It cuts quickly through metal pipes, tubes, flat sheets and much more. The disc features our Precision Shaped Grain, which continuously breaks down to super-sharp points and edges that cut cleanly through metal instead of grooving or gouging like traditional abrasives. This helps the material last significantly longer than conventional abrasives with ceramic grains, while maintaining a high cutting speed throughout its life. The disc should be attached to a cut-off tool (sold separately) and should always be used with a protective cover for safety. The disc should also have a maximum operating speed higher than or equal to the maximum speed of the tool used. Suggested applications Suitable for many industries, such as shipbuilding, railways and general metal industry For fast cutting through metal pipes, tubes and flat plates ds: dsc: kts: cut-off wheel, T41, 100 mm x 1 mm x 10 mm kpn: 51774 Silver kpn_dash: kpn_clear: 51774Silver bkpn: 3M 51774 Silver bkpn_clear: 3M 51774Silver c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Cutting disc | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m cutting tools / 3m sawing and cutting / 3m cutting disc sr_no_br_cl_ns: 7100139216 sr_ns: 3M7100139216
r: 02886433 p: 2.3 pid: 69685 b: 3M q: 650 st: 1 lt: 1 ean: 05902658109348 sr: 3M 7100139232 sr_no_br: 7100139232 sr_no_br_cl: 7100139232 sr_cl: 3M7100139232 sr_dash: sold: 1437.5 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 125 mm Connection size (disc) 22,2 mm Connection type (disc) Bore For material Steel; Stainless steel Shape (cutting disc) Flat Series SILVER Thickness 1 mm n: 3M 51790 Silver cut-off wheel, T41, 125 mm x 1 mm x 22.23 mm - 7100139232 cn: CUTTING DISC cn2: CUTTING DISC cn_clear: CUTTINGDISC d: Product description Quickly cuts through metal pipes, tubes, flat sheets and more. 3M Precision Shaped Grain grinds exceptionally fast, helping to increase productivity Long-lasting disc offers excellent performance and value Can be used on numerous substrates, including carbon steel and stainless steel Works with tools and accessories designed for cut-off wheels The 3M Silver cut-off wheel is designed to deliver an unbeatable combination of performance and value. It cuts quickly through metal pipes, tubes and flat sheets. The durable disc uses our Precision Shaped Grain for fast, consistent cutting action. Achieve fast, consistent cutting action with the 3M Silver cut-off wheel suitable for numerous applications. It cuts quickly through metal pipes, tubes, flat sheets and much more. The disc features our Precision Shaped Grain, which continuously breaks down to super-sharp points and edges that cut cleanly through metal instead of grooving or gouging like traditional abrasives. This helps the material last significantly longer than conventional abrasives with ceramic grains, while maintaining a high cutting speed throughout its life. The disc should be attached to a cut-off tool (sold separately) and should always be used with a protective cover for safety. The disc should also have a maximum operating speed higher than or equal to the maximum speed of the tool used. Suggested applications Suitable for many industries, such as shipbuilding, railways and general metal industry For fast cutting through metal pipes, tubes and flat plates ds: dsc: kts: cut-off wheel, T41, 125 mm x 1 mm x 22.23 mm kpn: 51790 Silver kpn_dash: kpn_clear: 51790Silver bkpn: 3M 51790 Silver bkpn_clear: 3M 51790Silver c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Cutting disc | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m cutting tools / 3m sawing and cutting / 3m cutting disc sr_no_br_cl_ns: 7100139232 sr_ns: 3M7100139232
r: 57111264 p: 21.322 pid: 46534 b: 3M q: 17 st: 1 lt: 1 ean: 04046719185238 sr: 3M 7000060188 sr_no_br: 7000060188 sr_no_br_cl: 7000060188 sr_cl: 3M7000060188 sr_dash: sold: 660.982 p_range: none type: standard act: 1 avo: 1 av: Width 50 mm Length 25 m Grit size 120 n: 3M 62888 abrasive sheet on roll 314D, 50 mm x 25 m, grain 120 - 7000060188 cn: SANDING ROLL cn2: SANDING ROLL cn_clear: SANDINGROLL d: Product description Widely applicable aluminium oxide sanding roll can be used on metal, wood and plastics. The fabric backing is both flexible and durable and can withstand heavy use. The strips can be torn to the desired size and wrapped around round pieces, applied around cylinders and folded into corners. 3M Cloth Sanding Roll 314D is a roll of lightweight cloth sanding strips used for manual sanding in many different applications. Our rolls are made with alumina abrasive material and are available in a range of coarsenesses for common applications such as deburring, blending and repairing finishes on metal substrates, removing rust or other dirt and preparing surfaces for paint and coatings. ds: dsc: kts: abrasive sheet on roll 314D, 50 mm x 25 m, grain 120 kpn: 62888 kpn_dash: kpn_clear: 62888 bkpn: 3M 62888 bkpn_clear: 3M 62888 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding roll | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m sanding roll sr_no_br_cl_ns: 7000060188 sr_ns: 3M7000060188
r: 03203558 p: 47.603 pid: 41143 b: 3M q: 0 st: lt: 6 ean: 00051131057043 sr: 3M 7100015405 sr_no_br: 7100015405 sr_no_br_cl: 7100015405 sr_cl: 3M7100015405 sr_dash: sold: 571.236 p_range: none type: standard act: 1 avo: 1 av: Diameter 203 mm n: 3M PN05704 wool polishing fleece 203 mm - 7100015405 cn: POLISHING SPONGE cn2: POLISHING SPONGE cn_clear: POLISHINGSPONGE d: Product description Remove sanding scratches and other paintwork damage Compound pad with fast cutting action Untwisted wool yarn composition offers better handling on large areas Developed for use with the 3M Hookit attachment system Use the 3M Wool compound pad with 3M compounds and attachment systems for polishing with compound on paints, clear and composite surfaces. Choose from 100% wool or a finer combination of 60/40 wool, for a variety of tasks. Use with our Hookit attachment system for quick pad changes. For a flawless finish. The 3M Wool compound pad ensures a flawless finish and efficient polishing on paints, clear and composite surfaces. Our compound pad is designed for easy use with 3M compounds and mounting systems, for efficiency and excellent results. Choose from 100% wool or a finer combination of 60/40 wool, as required for your task. Our double-sided pads with untwisted wool yarns feature a stiff, durable core that supports the wool abrasives during flat or aggressive compounding processes. The fuller pad offers good handling on larger surfaces. With the 3M Adapter 05710, this screw-on pad can be easily attached to eccentric sanders and other power tools. Use our single-sided pad with wool blend for further finishing corrections to paintwork flaws during car body polishing. The pad is designed for use with our Hookit attachment system, a Velcro system for attaching to support pads and attachment plates that allows pads to be changed quickly, saving you time. All our wool compound pads are specifically designed for use with our Perfect-It paint correction system, for high performance in all steps of the paint correction process. This system includes discs and pads for removing scratches, compounds, polishes and cleaners. ds: dsc: kts: wool polishing fleece 203 mm kpn: PN05704 kpn_dash: kpn_clear: PN05704 bkpn: 3M PN05704 bkpn_clear: 3M PN05704 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Polishing sponge | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m polishing sponge | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Polishing sponge sr_no_br_cl_ns: 7100015405 sr_ns: 3M7100015405
r: 57110608 p: 3.7 pid: 46417 b: 3M q: 0 st: lt: 5 ean: 05902658650338 sr: 3M 7000104457 sr_no_br: 7000104457 sr_no_br_cl: 7000104457 sr_cl: 3M7000104457 sr_dash: sold: 555 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 125 mm (Disc) attachment Bore hole Grit size 40 Bore size 22,2 mm Version (flap disc) Conical For material Steel; Stainless steel; Metal n: 3M 65033 Flap disc 566A, 125 mm, grain 40, conical - 7000104457 cn: FLAP DISC cn2: FLAP DISC cn_clear: FLAPDISC d: Product description Flap discs allow you to sand and blend in one go, saving time and costs. Aluminium zirconium grinds itself and provides long life and more cutting power than aluminium oxide, reducing replacement costs. Strong, Y-weight polyester-cotton backing provides flexibility and supports efficiency in medium- to high-pressure sanding and finishing. 3M Flap Disc 566A is a versatile disc for metal fabrication applications where greater durability is needed, for medium-pressure grinding, for removing small welds and for finishing and preparing a surface to be machined. When used on the right angle grinder, this disc is an easy alternative (one step) to bonded discs and fibre discs. 3M flap discs 566A have a self-sharpening alumina-zirconia abrasive mineral, for longer life and more powerful cutting action than aluminium oxide-based abrasives. You can attach our 566A discs to an angle grinder for one-step grinding and blending. The sturdy Y-weight polyester backing provides flexibility and ensures fast cutting action when grinding and finishing under medium to high pressure. Suggested applications For grinding, finishing, removing small welds and pre-treating surfaces under medium pressure ds: dsc: kts: Flap disc 566A, 125 mm, grain 40, conical kpn: 65033 kpn_dash: kpn_clear: 65033 bkpn: 3M 65033 bkpn_clear: 3M 65033 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap disc | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m flap disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Slat disc sr_no_br_cl_ns: 7000104457 sr_ns: 3M7000104457
r: 02831398 p: 1.77 pid: 41100 b: 3M q: 0 st: lt: 7 ean: 00076308897154 sr: 3M 7100099576 sr_no_br: 7100099576 sr_no_br_cl: 7100099576 sr_cl: 3M7100099576 sr_dash: sold: 531 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 125 mm (Disc) attachment Bore hole Bore size 22,2 mm Grit size 36 n: 3M 51494 fibre disc 782C, 125 mm x 22 mm, grain 36+ - 7100099576 cn: FIBRE DISC cn2: FIBRE DISC cn_clear: FIBREDISC d: Product description This product cuts quickly through carbon steel Premium grade mineral excels in intensive applications 3M Precision Shaped Grain technology results in better performance for cutting work Lower costs with durable abrasive: complete more work pieces than with conventional discs Durable and tear-resistant 3M Fibre Disc 782C is designed for ultra-fast cutting action on carbon steel. These discs feature our advanced 3M Precision Shaped Grain sanding technology. The stiff fibreglass backing and strong resin adhesive offer durability and tear resistance. These discs are compatible with 3M backing discs (sold separately). 3M Fibre disc 782C is designed for ultra-fast cutting action on carbon steel, offering excellent cutting action, durability and ease of operation. The performance of our discs far exceeds that of conventional fibre discs. Advanced abrasive technology makes these products an excellent choice for intensive applications including weld removal, blending and detailed finishing operations. High performance suitable for application on carbon steel Keep cost and performance in balance and choose the abrasive with exactly the right life and cutting force. These discs feature Precision Shaped Grain Technology (PSG) for an optimal balance between speed and life, suitable for most operations on carbon steel. The disc consists of a stiff glass fibre backing and a strong resin adhesive for durability and tear resistance. These features, combined with the fast-cutting abrasive grain, allow you to work on more parts with one disc and therefore reduce the need for disc replacement. The 782C's exceptional lifetime and cutting power make this one of 3M's best discs for intensive production environments. The performance of this product far exceeds that of conventional fibre discs. In tasks where more professional fibre discs probably cannot be used to their full potential, but where productivity is still key, these fibre discs deliver excellent throughput performance. These products are an excellent choice for a range of applications including chamfering, beveling, deburring and weld removal. Increase your production with 3M Precision Shaped Grain technology 3M Precision Shaped Grain is designed for improved output in light to intensive material removal, allowing users to complete tough tasks faster and with less effort. Because the abrasive grain wears evenly and stays sharp, PSG products last significantly longer than their conventional counterparts and deliver long-term high performance in production applications. To achieve this high level of performance, engineers at 3M applied proprietary microreplication technologies to create very precise triangular structures from 3M Ceramic Abrasive Grain material. These structures were then electrostatically oriented and placed as sharp triangles on the back of the disc. These ultra-sharp dots cut through metal like a knife, instead of grooving or ploughing like conventional abrasives. As the disc wears down, the points break off and new sharp points are created. Tips for optimal use Fibre discs are suitable for intensive use and have a tough, rigid backing of vulcanised glass fibre that is wear-resistant, and stands up to tough grinding applications. For optimum performance, these discs should be used with a backing pad of the appropriate density for the respective application: a lighter backing pad for lighter cutting operations and a firmer pad for heavy-duty applications. Use of the right backing pad ensures that the abrasive mineral remains sharp for maximum service life. Developed by 3M for top productivity 3M Abrasives engineers know all about the structure of abrasive minerals. 3M has been a top supplier of abrasives for the wood and metalworking industries for more than a hundred years, offering a comprehensive product range with high-quality solutions for all your tough metal grinding and sanding jobs. Fibre disc 782C is specially designed to take production to the next level by doing more work in less time. This is a great example of how 3M can use knowledge and science to provide advanced solutions that allow industry to operate faster, better and more efficiently. Suggested applications Use for a range of applications including chamfering, beveling, deburring and weld removal ds: dsc: kts: fibre disc 782C, 125 mm x 22 mm, grain 36+ kpn: 51494 kpn_dash: kpn_clear: 51494 bkpn: 3M 51494 bkpn_clear: 3M 51494 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Fibre disc | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m fibre disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Fiber disc sr_no_br_cl_ns: 7100099576 sr_ns: 3M7100099576
r: 02886434 p: 2.3 pid: 69688 b: 3M q: 0 st: lt: 5 ean: 05902658109362 sr: 3M 7100139234 sr_no_br: 7100139234 sr_no_br_cl: 7100139234 sr_cl: 3M7100139234 sr_dash: sold: 517.5 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 125 mm Connection size (disc) 22,2 mm Connection type (disc) Bore For material Steel; Stainless steel Shape (cutting disc) Flat Series SILVER Thickness 1,6 mm n: 3M 51792 Silver cut-off wheel, T41, 125 mm x 1.6 mm x 22.23 mm - 7100139234 cn: CUTTING DISC cn2: CUTTING DISC cn_clear: CUTTINGDISC d: Product description Quickly cuts through metal pipes, tubes, flat sheets and more. 3M Precision Shaped Grain grinds exceptionally fast, helping to increase productivity Long-lasting disc offers excellent performance and value Can be used on numerous substrates, including carbon steel and stainless steel Works with tools and accessories designed for cut-off wheels The 3M Silver cut-off wheel is designed to deliver an unbeatable combination of performance and value. It cuts quickly through metal pipes, tubes and flat sheets. The durable disc uses our Precision Shaped Grain for fast, consistent cutting action. Achieve fast, consistent cutting action with the 3M Silver cut-off wheel suitable for numerous applications. It cuts quickly through metal pipes, tubes, flat sheets and much more. The disc features our Precision Shaped Grain, which continuously breaks down to super-sharp points and edges that cut cleanly through metal instead of grooving or gouging like traditional abrasives. This helps the material last significantly longer than conventional abrasives with ceramic grains, while maintaining a high cutting speed throughout its life. The disc should be attached to a cut-off tool (sold separately) and should always be used with a protective cover for safety. The disc should also have a maximum operating speed higher than or equal to the maximum speed of the tool used. Suggested applications Suitable for many industries, such as shipbuilding, railways and general metal industry For fast cutting through metal pipes, tubes and flat plates ds: dsc: kts: cut-off wheel, T41, 125 mm x 1.6 mm x 22.23 mm kpn: 51792 Silver kpn_dash: kpn_clear: 51792Silver bkpn: 3M 51792 Silver bkpn_clear: 3M 51792Silver c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Cutting disc | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m cutting tools / 3m sawing and cutting / 3m cutting disc sr_no_br_cl_ns: 7100139234 sr_ns: 3M7100139234
r: 57111279 p: 2.05 pid: 36726 b: 3M q: 0 st: lt: 8 ean: 04046719184866 sr: 3M 7000060199 sr_no_br: 7000060199 sr_no_br_cl: 7000060199 sr_cl: 3M7000060199 sr_dash: sold: 512.5 p_range: none type: standard act: 1 avo: 1 av: Width 230 mm Length 280 mm Grit size 80 For material Wood; Metal; Plastic Sanding sheet Abrasive cloth n: 3M 62903 sanding sheet 314D, 230 mm x 280 mm, 80-grit paper - 7000060199 cn: SANDING SHEET cn2: SANDING SHEET cn_clear: SANDINGSHEET d: Product description For contour finishing, deburring and rust removal Versatile, durable sanding sheet that performs on metal, wood and plastic surfaces The backing is both flexible and durable enough for machine use You can tear the sheets by hand for easy sizing and less waste Our 3M Cloth Sanding Sheet 314D features a closed layer of aluminium oxide abrasive grains bonded to a durable backing. The product is suitable for blending cleaning, contour finishing, deburring and rust removal on all metals and paints. ds: dsc: kts: sanding sheet 314D, 230 mm x 280 mm, 80-grit paper kpn: 62903 kpn_dash: kpn_clear: 62903 bkpn: 3M 62903 bkpn_clear: 3M 62903 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding sheet | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m sanding sheet | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sanding blade sr_no_br_cl_ns: 7000060199 sr_ns: 3M7000060199
r: 57111266 p: 26.28 pid: 48531 b: 3M q: 4 st: 1 lt: 1 ean: 4046719185313 sr: 3M 7000060190 sr_no_br: 7000060190 sr_no_br_cl: 7000060190 sr_cl: 3M7000060190 sr_dash: sold: 499.32 p_range: none type: standard act: 1 avo: 1 av: Width 50 mm Length 25 m Grit size 180 n: 3M 62890 abrasive sheet on roll 314D, 50 mm x 25 m, 180 grit - 7000060190 cn: SANDING ROLL cn2: SANDING ROLL cn_clear: SANDINGROLL d: Product description Widely applicable aluminium oxide sanding roll can be used on metal, wood and plastics. The fabric backing is both flexible and durable and can withstand heavy use. The strips can be torn to the desired size and wrapped around round pieces, applied around cylinders and folded into corners. 3M Cloth Sanding Roll 314D is a roll of lightweight cloth sanding strips used for manual sanding in many different applications. Our rolls are made with alumina abrasive material and are available in a range of coarsenesses for common applications such as deburring, blending and repairing finishes on metal substrates, removing rust or other dirt and preparing surfaces for paint and coatings. ds: dsc: kts: abrasive sheet on roll 314D, 50 mm x 25 m, 180 grit kpn: 62890 kpn_dash: kpn_clear: 62890 bkpn: 3M 62890 bkpn_clear: 3M 62890 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding roll | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m sanding roll sr_no_br_cl_ns: 7000060190 sr_ns: 3M7000060190
r: 57111267 p: 26.28 pid: 46564 b: 3M q: 11 st: 1 lt: 1 ean: 04046719185351 sr: 3M 7000060191 sr_no_br: 7000060191 sr_no_br_cl: 7000060191 sr_cl: 3M7000060191 sr_dash: sold: 499.32 p_range: none type: standard act: 1 avo: 1 av: Width 50 mm Length 25 m Grit size 240 n: 3M 62892 abrasive sheet on roll 314D, 50 mm x 25 m, grain 240 - 7000060191 cn: SANDING ROLL cn2: SANDING ROLL cn_clear: SANDINGROLL d: Product description Widely applicable aluminium oxide sanding roll can be used on metal, wood and plastics. The fabric backing is both flexible and durable and can withstand heavy use. The strips can be torn to the desired size and wrapped around round pieces, applied around cylinders and folded into corners. 3M Cloth Sanding Roll 314D is a roll of lightweight cloth sanding strips used for manual sanding in many different applications. Our rolls are made with alumina abrasive material and are available in a range of coarsenesses for common applications such as deburring, blending and repairing finishes on metal substrates, removing rust or other dirt and preparing surfaces for paint and coatings. ds: dsc: kts: abrasive sheet on roll 314D, 50 mm x 25 m, grain 240 kpn: 62892 kpn_dash: kpn_clear: 62892 bkpn: 3M 62892 bkpn_clear: 3M 62892 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding roll | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m sanding roll sr_no_br_cl_ns: 7000060191 sr_ns: 3M7000060191
r: 57111269 p: 23.925 pid: 46566 b: 3M q: 9 st: 1 lt: 1 ean: 04046719185436 sr: 3M 7000060193 sr_no_br: 7000060193 sr_no_br_cl: 7000060193 sr_cl: 3M7000060193 sr_dash: sold: 430.65 p_range: none type: standard act: 1 avo: 1 av: Width 50 mm Length 25 m Grit size 400 n: 3M 62894 abrasive sheets on roll 314D, 50 mm x 25 m, 400 grit - 7000060193 cn: SANDING ROLL cn2: SANDING ROLL cn_clear: SANDINGROLL d: Product description Widely applicable aluminium oxide sanding roll can be used on metal, wood and plastics. The fabric backing is both flexible and durable and can withstand heavy use. The strips can be torn to the desired size and wrapped around round pieces, applied around cylinders and folded into corners. 3M Cloth Sanding Roll 314D is a roll of lightweight cloth sanding strips used for manual sanding in many different applications. Our rolls are made with alumina abrasive material and are available in a range of coarsenesses for common applications such as deburring, blending and repairing finishes on metal substrates, removing rust or other dirt and preparing surfaces for paint and coatings. ds: dsc: kts: abrasive sheets on roll 314D, 50 mm x 25 m, 400 grit kpn: 62894 kpn_dash: kpn_clear: 62894 bkpn: 3M 62894 bkpn_clear: 3M 62894 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding roll | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m sanding roll sr_no_br_cl_ns: 7000060193 sr_ns: 3M7000060193
r: 57111262 p: 30.743 pid: 46555 b: 3M q: 10 st: 1 lt: 1 ean: 4046719184859 sr: 3M 7000060186 sr_no_br: 7000060186 sr_no_br_cl: 7000060186 sr_cl: 3M7000060186 sr_dash: sold: 368.916 p_range: none type: standard act: 1 avo: 1 av: Width 50 mm Length 25 m Grit size 80 n: 3M 62886 abrasive sheet on roll 314D, 50 mm x 25 m, 80 grit - 7000060186 cn: SANDING ROLL cn2: SANDING ROLL cn_clear: SANDINGROLL d: Product description Widely applicable aluminium oxide sanding roll can be used on metal, wood and plastics. The fabric backing is both flexible and durable and can withstand heavy use. The strips can be torn to the desired size and wrapped around round pieces, applied around cylinders and folded into corners. 3M Cloth Sanding Roll 314D is a roll of lightweight cloth sanding strips used for manual sanding in many different applications. Our rolls are made with alumina abrasive material and are available in a range of coarsenesses for common applications such as deburring, blending and repairing finishes on metal substrates, removing rust or other dirt and preparing surfaces for paint and coatings. ds: dsc: kts: abrasive sheet on roll 314D, 50 mm x 25 m, 80 grit kpn: 62886 kpn_dash: kpn_clear: 62886 bkpn: 3M 62886 bkpn_clear: 3M 62886 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding roll | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m sanding roll sr_no_br_cl_ns: 7000060186 sr_ns: 3M7000060186
r: 03009554 p: 1.7 pid: 41126 b: 3M q: 0 st: lt: 8 ean: 00076308897000 sr: 3M 7100100961 sr_no_br: 7100100961 sr_no_br_cl: 7100100961 sr_cl: 3M7100100961 sr_dash: sold: 340 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 75 mm (Disc) attachment TR roloc Bore size Grit size 80 n: 3M 787961 Roloc fibre disc 787C, Ø 75 mm, grit 80+ - 7100100961 cn: FIBRE DISC cn2: FIBRE DISC cn_clear: FIBREDISC d: Product description Powerful cutting action and cuts quickly through metals such as stainless steels and alloys with high nickel content 3M Precision Shaped Grain technology delivers strong cutting action and excels in tough applications Grinding Aid prevents high heat build-up on heat-sensitive alloys Lower costs with durable abrasive: complete more workpieces than with conventional discs Durable and tear-resistant The 3M Roloc Fibre Disc 787C features our advanced 3M Precision Shaped Grain technology. These discs feature a stiff fibreglass backing and the strong resin adhesive for durability and tear resistance. The discs are equipped with a grinding aid. The 3M Roloc Fibre disc 787C is designed for ultra-fast cutting action and equipped with 3M Precision Shaped Grain technology. Our discs are durable and tear-resistant. The discs consist of a rigid glass fibre backing and a strong resin adhesive. These features, combined with the high-quality abrasive grain, ensure that you can work on more parts with one disc and therefore also reduce the need for disc replacement. These discs are equipped with a grinding aid that keeps the disc and the element being worked on cool and extends the life of the disc. The 787C fibre discs are an excellent choice for weld removal, blending and detailed finishing operations on stainless steels and alloys with high nickel content. The 787C discs offer excellent cutting action, durability and ease of use, and they perform much better than conventional fibre discs. The advanced solution for demanding applications Balance cost and performance and choose the abrasive with just the right life and cutting power. The 3M Roloc Fibre Disc 787C contains exactly the right amount of Precision Shaped Grain mineral (PSG) you need for an optimal balance between speed and life in all kinds of demanding applications, from grinding to deburring. The exceptional life and cutting power of this fibre disc make this one of 3M's best discs for intensive production environments. The performance of this product far exceeds that of conventional fibre discs. In tasks where more professional fibre discs probably cannot be used to their full potential, but where productivity is still key, these fibre discs deliver excellent throughput performance. These products are an excellent choice for a range of applications including chamfering, beveling, deburring and weld removal. Increase your production with 3M Precision Shaped Grain technology 3M Precision Shaped Grain is designed for improved output in light to intensive material removal, allowing users to complete tough tasks faster and with less effort. The disc wears evenly and because the abrasive remains cool and sharp, PSG products last significantly longer than their conventional counterparts and deliver long-term high performance in production applications. To achieve this high level of performance, engineers at 3M applied proprietary microreplication technologies to create very precise triangular structures from 3M Ceramic Abrasive Grain material. These structures were then electrostatically oriented and placed as sharp triangles on the back of the disc. These ultra-sharp dots cut through metal like a knife, instead of grooving or ploughing like conventional abrasives. As the disc wears down, the dots break off, creating new sharp points. Thanks to the Roloc system, you can replace a disc quickly and easily. The 787C fibre disc is available with a diameter between 5.08 cm - 10.16 cm for use with TSM and TR Roloc fastening systems. Choose the disc with the fastening system made for your tool. Tips for optimal use Fibre discs are suitable for intensive use and have a tough, rigid backing of vulcanised glass fibre that is wear-resistant, and able to withstand tough grinding applications. For optimum performance, this disc should be used with a 3M Roloc backing disc of the appropriate density for the respective application: a softer backing disc for lighter cutting operations and a firmer disc for heavy-duty applications. Use of the right backing pad ensures that the abrasive mineral remains sharp for maximum service life. Developed by 3M for top productivity 3M Abrasives engineers know all about the structure of abrasive minerals. 3M has been a top supplier of abrasives for the wood and metalworking industries for more than 100 years. 3M offers a complete line of high-quality metalworking solutions suitable for all your tough jobs. The 787C fibre discs are specially designed to take production to the next level by doing more work in less time. This is a great example of how 3M can use knowledge and science to provide advanced solutions that allow industry to operate faster, better and more efficiently. Suggested applications For weld seam removal, blending and detailed finishing of stainless steels and alloys with high nickel content ds: dsc: kts: Roloc fibre disc 787C, Ø 75 mm, grit 80+ kpn: 787961 kpn_dash: kpn_clear: 787961 bkpn: 3M 787961 bkpn_clear: 3M 787961 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Fibre disc | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m fibre disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Fiber disc sr_no_br_cl_ns: 7100100961 sr_ns: 3M7100100961
r: 02886391 p: 10.61 pid: 41482 b: 3M q: 0 st: lt: 8 ean: 04054596444126 sr: 3M 7100141099 sr_no_br: 7100141099 sr_no_br_cl: 7100141099 sr_cl: 3M7100141099 sr_dash: sold: 318.3 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 230 mm Bore size 22,2 mm Connection type (disc) Bore Shape (grinding disc) Depressed centre For material Steel; Stainless steel Thickness 7 mm n: 3M 51751 Silver grinding disc, T27, 230 mm x 7 mm x 22.23 mm - 7100141099 cn: GRINDING DISC cn2: GRINDING DISC cn_clear: GRINDINGDISC d: Product description Perfect for heavy grinding, beveling and removal of weld seams 3M Precision Shaped Grain grinds exceptionally fast, helping to increase productivity Long-life disc offers excellent performance and value Can be used on numerous substrates, including carbon steel and stainless steel Works with tools and accessories designed for deburring discs The 3M Silver deburring disc is our Type 27 disc, designed to provide an unbeatable combination of performance and value that ensures fast and consistent cutting action and heavy material removal when grinding stainless steel, mild steel, aerospace alloys and more. Use the 3M Silver deburring disc for aggressive grinding applications such as chamfering, weld removal, weld grinding and edge machining on all kinds of metals. The disc features our Precision Shaped Grain, which continuously breaks down into super-sharp points and edges that cut cleanly through metal instead of grooving or gouging like traditional abrasives. This helps the material to last significantly longer than conventional abrasives with ceramic grains and maintain a high cutting speed throughout its lifetime. To be used with tools and accessories designed for deburring discs. For safety, always use on tools with an approved guard, in accordance with DIN EN 12413 for bonded abrasives. Suggested applications For aggressive grinding applications such as chamfering, removal of welds, grinding of weld seams and machining of edges on various metals ds: dsc: kts: Silver grinding disc, T27, 230 mm x 7 mm x 22.23 mm kpn: 51751 kpn_dash: kpn_clear: 51751 bkpn: 3M 51751 bkpn_clear: 3M 51751 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding disc | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m grinding disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Grinding disc sr_no_br_cl_ns: 7100141099 sr_ns: 3M7100141099
r: 57110610 p: 3.7 pid: 46352 b: 3M q: 0 st: lt: 9 ean: 05902658650352 sr: 3M 7000104464 sr_no_br: 7000104464 sr_no_br_cl: 7000104464 sr_cl: 3M7000104464 sr_dash: sold: 296 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 125 mm (Disc) attachment Bore hole Grit size 80 Bore size 22,2 mm Version (flap disc) Conical For material Steel; Stainless steel; Metal n: 3M 65035 Flap disc 566A, 125 mm, 80 grit, conical - 7000104464 cn: FLAP DISC cn2: FLAP DISC cn_clear: FLAPDISC d: Product description Flap discs allow you to sand and blend in one go, saving time and costs. Aluminium zirconium grinds itself and provides long life and more cutting power than aluminium oxide, reducing replacement costs. Strong, Y-weight polyester-cotton backing provides flexibility and supports efficiency in medium- to high-pressure sanding and finishing. 3M Flap Disc 566A is a versatile disc for metal fabrication applications where greater durability is needed, for medium-pressure grinding, for removing small welds and for finishing and preparing a surface to be machined. When used on the right angle grinder, this disc is an easy alternative (one step) to bonded discs and fibre discs. 3M flap discs 566A have a self-sharpening alumina-zirconia abrasive mineral, for longer life and more powerful cutting action than aluminium oxide-based abrasives. You can attach our 566A discs to an angle grinder for one-step grinding and blending. The sturdy Y-weight polyester backing provides flexibility and ensures fast cutting action when grinding and finishing under medium to high pressure. Suggested applications For grinding, finishing, removing small welds and pre-treating surfaces under medium pressure ds: dsc: kts: Flap disc 566A, 125 mm, 80 grit, conical kpn: 65035 kpn_dash: kpn_clear: 65035 bkpn: 3M 65035 bkpn_clear: 3M 65035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap disc | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m flap disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Slat disc sr_no_br_cl_ns: 7000104464 sr_ns: 3M7000104464
r: 57941260 p: 0.91 pid: 46008 b: 3M q: 78 st: 1 lt: 1 ean: 00051144224012 sr: 3M 7000000381 sr_no_br: 7000000381 sr_no_br_cl: 7000000381 sr_cl: 3M7000000381 sr_dash: sold: 287.56 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 51 mm (Disc) attachment TR roloc Bore size Perforated No For material Metal Series 361F Grit size 80 n: 3M 22401 Roloc sanding disc 361F, yellow, Ø 51 mm, grit 80 - 7000000381 cn: SANDING DISC cn2: SANDING DISC cn_clear: SANDINGDISC d: Product description The 3M Roloc attachment enables efficient and safe application and removal of discs. Durable aluminium oxide abrasive grit cuts quickly and performs well on many surfaces. Strong polyester backing supports medium-pressure applications and delivers consistent performance Heat-resistant bond offers greater durability under pressure, heat and water The disc can be used in wet or dry applications 3M Roloc Sanding Disc 361F features a quick-change attachment and provides durability and high performance for sanding, blending, deburring and finishing all metal substrates. The aluminium oxide sanding grains are bonded to the fabric backing by means of a heat-resistant resin suitable for both wet and dry applications. 3M Roloc sanding discs 361F are suitable for quick-change systems and offer long-lasting, powerful performance in grinding, blending, deburring and finishing all types of metal. Our 361F sanding discs are suitable for both wet and dry use. The tough YF-weight polyester backing is suitable for medium-pressure applications and ensures consistent results. These sanding discs have a durable aluminium oxide-based abrasive for fast cutting action and good performance on all kinds of surfaces. The abrasive is resin bonded to the backing for lasting strength even under pressure, heat or when water is used. Suggested applications For grinding, blending, deburring and finishing all types of metal ds: dsc: kts: sanding disc 361F, yellow, Ø 51 mm, grit 80 kpn: 22401 Roloc kpn_dash: kpn_clear: 22401Roloc bkpn: 3M 22401 Roloc bkpn_clear: 3M 22401Roloc c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding disc | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m sanding disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7000000381 sr_ns: 3M7000000381
r: 02059566 p: 1.35 pid: 41341 b: 3M q: 0 st: lt: 8 ean: 00051144114184 sr: 3M 7000045106 sr_no_br: 7000045106 sr_no_br_cl: 7000045106 sr_cl: 3M7000045106 sr_dash: sold: 270 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 76 mm (Disc) attachment TR roloc Bore size Perforated No For material Metal Series 361F Grit size 240 n: 3M 11418 Roloc Roloc sanding disc 361F, light green, Ø 76 mm, grit 240 - 7000045106 cn: SANDING DISC cn2: SANDING DISC cn_clear: SANDINGDISC d: Product description The 3M Roloc attachment enables efficient and safe application and removal of discs. Durable aluminium oxide abrasive grit cuts quickly and performs well on many surfaces. Strong polyester backing supports medium-pressure applications and delivers consistent performance Heat-resistant bond offers greater durability under pressure, heat and water The disc can be used in wet or dry applications 3M Roloc Sanding Disc 361F features a quick-change attachment and provides durability and high performance for sanding, blending, deburring and finishing all metal substrates. The aluminium oxide sanding grains are bonded to the fabric backing by a heat-resistant resin that is suitable for both wet and dry applications. 3M Roloc sanding discs 361F are suitable for quick-change systems and offer long-lasting, powerful performance in grinding, blending, deburring and finishing all types of metal. Our 361F sanding discs are suitable for both wet and dry use. The tough YF-weight polyester backing is suitable for medium-pressure applications and ensures consistent results. These sanding discs have a durable aluminium oxide-based abrasive for fast cutting action and good performance on all kinds of surfaces. The abrasive is resin bonded to the backing for lasting strength even under pressure, heat or when water is used. Suggested applications For grinding, blending, deburring and finishing all types of metal ds: dsc: kts: Roloc sanding disc 361F, light green, Ø 76 mm, grit 240 kpn: 11418 Roloc kpn_dash: kpn_clear: 11418Roloc bkpn: 3M 11418 Roloc bkpn_clear: 3M 11418Roloc c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding disc | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m sanding disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7000045106 sr_ns: 3M7000045106
r: 02886419 p: 1.77 pid: 41530 b: 3M q: 0 st: lt: 8 ean: 05902658109195 sr: 3M 7100139209 sr_no_br: 7100139209 sr_no_br_cl: 7100139209 sr_cl: 3M7100139209 sr_dash: sold: 265.5 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 75 mm Connection size (disc) 10 mm Connection type (disc) Bore For material Steel; Stainless steel Shape (cutting disc) Flat Series SILVER Thickness 0,9 mm n: 3M 51767 Silver cut-off wheel, T41, 75 mm x 0.9 mm x 10 mm - 7100139209 cn: CUTTING DISC cn2: CUTTING DISC cn_clear: CUTTINGDISC d: Product description Quickly cuts through metal pipes, tubes, flat sheets and more. 3M Precision Shaped Grain grinds exceptionally fast, helping to increase productivity Long-lasting disc offers excellent performance and value Can be used on numerous substrates, including carbon steel and stainless steel Works with tools and accessories designed for cut-off wheels The 3M Silver cut-off wheel is designed to deliver an unbeatable combination of performance and value. It cuts quickly through metal pipes, tubes and flat sheets. The durable disc uses our Precision Shaped Grain for fast, consistent cutting action. Achieve fast, consistent cutting action with the 3M Silver cut-off wheel suitable for numerous applications. It cuts quickly through metal pipes, tubes, flat sheets and much more. The disc features our Precision Shaped Grain, which continuously breaks down to super-sharp points and edges that cut cleanly through metal instead of grooving or gouging like traditional abrasives. This helps the material last significantly longer than conventional abrasives with ceramic grains, while maintaining a high cutting speed throughout its life. The disc should be attached to a cut-off tool (sold separately) and should always be used with a protective cover for safety. The disc should also have a maximum operating speed higher than or equal to the maximum speed of the tool used. Suggested applications Suitable for many industries, such as shipbuilding, railways and general metal industry For fast cutting through metal pipes, tubes and flat plates ds: dsc: kts: cut-off wheel, T41, 75 mm x 0.9 mm x 10 mm kpn: 51767 Silver kpn_dash: kpn_clear: 51767Silver bkpn: 3M 51767 Silver bkpn_clear: 3M 51767Silver c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Cutting disc | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m cutting tools / 3m sawing and cutting / 3m cutting disc sr_no_br_cl_ns: 7100139209 sr_ns: 3M7100139209
r: 57111260 p: 36.859 pid: 45796 b: 3M q: 2 st: 1 lt: 1 ean: 4046719184521 sr: 3M 7000060184 sr_no_br: 7000060184 sr_no_br_cl: 7000060184 sr_cl: 3M7000060184 sr_dash: sold: 221.154 p_range: none type: standard act: 1 avo: 1 av: Width 50 mm Length 25 m Grit size 50 n: 3M 62884 abrasive sheet on roll 314D, 50 mm x 25 m, grit 50 - 7000060184 cn: SANDING ROLL cn2: SANDING ROLL cn_clear: SANDINGROLL d: Product description Widely applicable aluminium oxide sanding roll can be used on metal, wood and plastics. The fabric backing is both flexible and durable and can withstand heavy use. The strips can be torn to the desired size and wrapped around round pieces, applied around cylinders and folded into corners. 3M Cloth Sanding Roll 314D is a roll of lightweight cloth sanding strips used for manual sanding in many different applications. Our rolls are made with alumina abrasive material and are available in a range of coarsenesses for common applications such as deburring, blending and repairing finishes on metal substrates, removing rust or other dirt and preparing surfaces for paint and coatings. ds: dsc: kts: abrasive sheet on roll 314D, 50 mm x 25 m, grit 50 kpn: 62884 kpn_dash: kpn_clear: 62884 bkpn: 3M 62884 bkpn_clear: 3M 62884 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding roll | Home / Our brands / 3m / 3m tools / 3m machining tools / 3m surface treatment / 3m sanding, sharpening, polishing and deburring / 3m sanding roll sr_no_br_cl_ns: 7000060184 sr_ns: 3M7000060184
