What is the shrink range of this heat shrink tubing?

With a 3:1 shrink ratio, the tubing shrinks from an inner diameter of 3 mm before shrinking down to a maximum of 1 mm after full recovery.

What is the benefit of the integrated adhesive lining?

The internal hot-melt adhesive melts during heating, flows into gaps and crevices, and creates a reliable, moisture-proof seal once cooled.

Is this heat shrink tubing flame retardant?

Yes, the polyolefin material is flame-retardant and self-extinguishing, ensuring safe and dependable electrical insulation.

What temperature is required to shrink the tubing?

The minimum shrink temperature is 120 °C. You can easily and evenly apply it using a heat gun.

How is this heat shrink tubing supplied?

It is supplied on a continuous 5 m roll in a practical dispenser box, allowing you to easily cut the exact length required for your job.

3M ETW-803 heat shrink tubing self-extinguishing with adhesive 3:1 Ø for shrink 3 mm black 5 m, dispenser box - 7000098924

Supplier number: 3M 7000098924 | EAN 8712403038369

21.95 tax incl.

€18.14 excl. VAT (incl. all environmental contributions)

On stock - immediately available

roll

Delivery by DHL

✆ Talk to a specialist

Reliable sealing with 3M ETW-803

Practical benefits

Watertight hot melt adhesive: The internal adhesive flows during shrinkage to create an effective barrier against moisture and fluids.
Versatile 3:1 shrink ratio: You can easily bridge large diameter differences between connectors and cables for a secure fit.
Flame retardant polyolefin jacket: The self-extinguishing outer wall provides dependable mechanical protection and increased safety for electrical wiring.

In a nutshell

The right choise for

With the 3m ETW-803 heat shrink tubing, you achieve durable, waterproof insulation for your electrical wiring. Featuring a 3:1 shrink ratio, it reduces effortlessly from 3 mm down to a maximum of 1 mm to secure uneven cable transitions. The internal hot-melt adhesive melts during heating, flowing into gaps to form an effective barrier against moisture, corrosion, and mechanical strain. Built from flame-retardant and self-extinguishing polyolefin, it provides dependable safety for every installation. Supplied on a continuous 5 m roll in a convenient dispenser box, you can cleanly cut the exact length required for your project without waste.

Product information FAQ

€21.95

In stock - tax incl.

Key features according to our expert

Diameter: 3 mm
Length: 5 m

Product description

Flexible polyolefin
With adhesive layer
3:1 shrink ratio
Sealing according to IP68
On a roll

The ETW is a thin-walled polyolefin heat shrink tubing with hot melt adhesive in dispenser box. Shrink ratio is 3:1, min. shrink temperature 120 °C, operating temperature -55 to +135 °C. RoHS-compliant, flame-retardant - self-extinguishing. Good chemical resistance.

The ETW is a thin-walled polyolefin heat shrink tubing with hot melt adhesive. Shrink ratio is 3:1, min. shrink temperature 120 °C, operating temperature -55 to +135 °C. ETW meets RoHS requirements, is flame-retardant - self-extinguishing and offers good chemical resistance. ETW is a fast-shrinking thin-wall heat shrink tubing preferred for general electrical applications, such as insulating, bundling, marking, moisture-proofing, protecting against mechanical wear and corrosion, reducing pulling forces on low-voltage cables, connecting wires and making electrical connections. The shrink sleeves are supplied on a compact roll, allowing you to cut them to size. The ETW is available in sizes from 3.0/1.0 mm to 19.0/6.0 mm with a wall thickness (after shrinkage) of 1.0-2.2 mm. Colour: black. Packed as standard in a dispenser box.

All Features

Diameter: 3 mm
Length: 5 m

Brand 3M
02710880
EAN 8712403038369
Supplier number 3M 7000098924

Frequently asked questions about this product

Answered by specialists

What is the shrink range of this heat shrink tubing?: With a 3:1 shrink ratio, the tubing shrinks from an inner diameter of 3 mm before shrinking down to a maximum of 1 mm after full recovery.
What is the benefit of the integrated adhesive lining?: The internal hot-melt adhesive melts during heating, flows into gaps and crevices, and creates a reliable, moisture-proof seal once cooled.
Is this heat shrink tubing flame retardant?: Yes, the polyolefin material is flame-retardant and self-extinguishing, ensuring safe and dependable electrical insulation.
What temperature is required to shrink the tubing?: The minimum shrink temperature is 120 °C. You can easily and evenly apply it using a heat gun.
How is this heat shrink tubing supplied?: It is supplied on a continuous 5 m roll in a practical dispenser box, allowing you to easily cut the exact length required for your job.