r: 02890432 p: 4.92 pid: 176030 b: FISCHER q: 0 st: lt: 8 ean: 4048962180824 sr: FISCHER 522707 sr_no_br: 522707 sr_no_br_cl: 522707 sr_cl: FISCHER522707 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 260 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40 Drilling diameter 10 mm n: FISCHER 522707 construction plug SXRL 10 x 260 T countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL-T is approved along with the fischer countersunk head screw with TX40 drive for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings in internal areas such as windows, coat racks, wall cupboards, or TV consoles. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 and 90 mm for SXRL 8 and SXRL 10 and 70 and 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 290 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 10 x 260 T countersunk head kpn: 522707 kpn_dash: kpn_clear: 522707 bkpn: FISCHER 522707 bkpn_clear: FISCHER 522707 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 522707 sr_ns: FISCHER522707
r: 02454494 p: 4.8 pid: 22185 b: SPIT q: 0 st: lt: 6 ean: 3439515679796 sr: SPIT 567979 sr_no_br: 567979 sr_no_br_cl: 567979 sr_cl: SPIT567979 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length (Wall plug) 280 mm Material (wall plug) Plastic Wall plug type Hammer-in plug With screw Yes Application Brick; Aerated concrete Drilling diameter 10 mm n: SPIT 567979 B-LONG universal construction plug with collar, hexagon with Torx connection 10x280/230 HS SW13 TX40 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description Universal construction plug with collar, hexagon with Torx connection Versatile frame & frame anchor with high performance ETA-approved for fixings in concrete and masonry Uniform expansion prevents rotation during application Short anchor depth: only 40 mm for concrete, therefore less fixing time High load values: up to 220 kg in concrete Extra long lengths: fixing thickness up to 250 mm Suitable for use in multiple materials, for a wide range of applications Easy to install Fire and seismic test reports Applications Windows Doors Fences Ventilated facades Cladding Metal framing Insulation supports Metal brackets and cross members ds: dsc: kts: B-LONG universal construction plug with collar, hexagon with Torx connection 10x280/230 HS SW13 TX40 kpn: 567979 kpn_dash: kpn_clear: 567979 bkpn: SPIT 567979 bkpn_clear: SPIT 567979 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit plugs and covers / Spit wall plug sr_no_br_cl_ns: 567979 sr_ns: SPIT567979
r: 02706290 p: 4.78 pid: 15681 b: SPIT q: 0 st: lt: 10 ean: 3439515679864 sr: SPIT 567986 sr_no_br: 567986 sr_no_br_cl: 567986 sr_cl: SPIT567986 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: With screw Yes Drilling diameter 10 mm Application Brick; Aerated concrete Wall plug type Hammer-in plug Material (wall plug) Plastic Length (Wall plug) 60 mm n: SPIT 567986 B-LONG XTREM universal stainless steel construction plug with collar, hexagon with Torx connection 10x60/10 HS stainless steel A4 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description Universal stainless steel construction plug with collar, hexagon with Torx connection Versatile frame & frame anchor with high performance ETA-approved for fixings in concrete and masonry Stainless steel for use in external applications Uniform expansion prevents rotation during application Short anchor depth: only 40 mm for concrete, therefore less fixing time High load values Extra long lengths: fixing thickness up to 250 mm Suitable for use in multiple materials, for a wide range of applications Fire and seismic test reports Applications Windows Doors Fences Ventilated facades Cladding Metal framing Insulation supports Metal brackets and cross members ds: dsc: kts: B-LONG XTREM universal stainless steel construction plug with collar, hexagon with Torx connection 10x60/10 HS stainless steel A4 kpn: 567986 kpn_dash: kpn_clear: 567986 bkpn: SPIT 567986 bkpn_clear: SPIT 567986 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit plugs and covers / Spit wall plug sr_no_br_cl_ns: 567986 sr_ns: SPIT567986
r: 08134134 p: 4.12 pid: 176371 b: FISCHER q: 0 st: lt: 8 ean: sr: FISCHER 542802 sr_no_br: 542802 sr_no_br_cl: 542802 sr_cl: FISCHER542802 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 12 mm Length (Wall plug) 60 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Cavity wall plug With screw Yes With collar No Application General n: FISCHER 542802 Hollow wall plug DuoTec 12 S PH with metric round head screw (2 pcs) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The assembly-friendly solution for heavy loads in sheet metal. A combination of two material components for more power. The flange sleeve reinforces the drill hole and enables significantly higher transverse forces. The curved handle enables obstacle detection before starting assembly. The flexible screw fastening allows the use of screws and hooks with different thread shapes. The fibreglass-reinforced plastic and metal insert (fischer DuoTec 12) ensure the absorption of high tensile and transverse forces in all types of board material. The soft, grey nylon contact side distributes the load over the entire panel surface, thus minimising any weakening of the load-bearing building material. Common borehole diameters and a short rocker element ensure easy mounting even in small or insulated hollow spaces. The white flange sleeve with locking function ensures fast and secure mounting of the plug in the drilled hole. With scale on the band (fischer DuoTec 12) for determining the required screw length (scale value + 20 mm). The unique action and the geometry of the fischer DuoTec's plug allow for extremely heavy loads for rocker plugs. This reduces the number of fasteners in multiple fastenings and maximises safety. As part of the DuoLine, the DuoTec consists of two plastic components. The red and hard component of the plug's sleeve enables the uniform distribution of the load, while the grey and white prevent damage to the surface of the board during fastening and thus a load reduction. In applications in board materials, which have a hollow space behind them, the DuoTec is applied as a tumbling plug. In solid building materials, the plug can also be used as a spreader plug. Applications Suspended kitchen cabinets Wall cabinets Bookshelves Wardrobes Handrails Paintings Mirrors Lamps Heavy hanging baskets Building materials Suitable for: Plasterboard Gypsum fibreboard Wooden panels (e.g. OSB, chipboard, MDF, etc.) Steel plate Plastic sheets Concrete hollow brick Also suitable for: Solid materials such as concrete and wood ds: dsc: kts: Hollow wall plug DuoTec 12 S PH with metric round head screw (2 pcs) kpn: 542802 kpn_dash: kpn_clear: 542802 bkpn: FISCHER 542802 bkpn_clear: FISCHER 542802 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 542802 sr_ns: FISCHER542802
r: 03320211 p: 4.1 pid: 178035 b: TEC7 q: 0 st: lt: 8 ean: 5414195022603 sr: TEC7 591825290 sr_no_br: 591825290 sr_no_br_cl: 591825290 sr_cl: TEC7591825290 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 15-18 mm Length (Wall plug) 100 mm n: TEC7 591825290 anchor plug with harpoon hooks M13 (15 pcs.) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description ANCHOR PLUG WITH HARPOON HOOKS Anchor plug with harpoon hooks For firm anchoring with Anchor The Anchor plug increases effectiveness and reduces consumption when anchoring in hollow materials Available in two sizes: Anchor plug 13mm: for bolts or threaded rods with diameters of 6 to 11 mm, for drill holes with diameters of 13 to 16 mm. Anchor plug 15 mm: for bolts or threaded rods with a diameter of 10 to 13 mm, for drill holes with a diameter of 15 to 18 mm ds: dsc: kts: anchor plug with harpoon hooks M13 (15 pcs.) kpn: 591825290 kpn_dash: kpn_clear: 591825290 bkpn: TEC7 591825290 bkpn_clear: TEC7 591825290 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Tec7 / Tec7 fasteners and machine components / Tec7 fasteners / Tec7 plugs and covers / Tec7 wall plug sr_no_br_cl_ns: 591825290 sr_ns: TEC7591825290
r: 02454491 p: 3.93 pid: 22182 b: SPIT q: 0 st: lt: 6 ean: 3439515679772 sr: SPIT 567977 sr_no_br: 567977 sr_no_br_cl: 567977 sr_cl: SPIT567977 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length (Wall plug) 230 mm Material (wall plug) Plastic Wall plug type Hammer-in plug With screw Yes Application Brick; Aerated concrete Drilling diameter 10 mm n: SPIT 567977 B-LONG universal construction plug with collar, hexagon with Torx connection 10x230/180 HS SW13 TX40 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description Universal construction plug with collar, hexagon with Torx connection Versatile frame & frame anchor with high performance ETA-approved for fixings in concrete and masonry Uniform expansion prevents rotation during application Short anchor depth: only 40 mm for concrete, therefore less fixing time High load values: up to 220 kg in concrete Extra long lengths: fixing thickness up to 250 mm Suitable for use in multiple materials, for a wide range of applications Easy to install Fire and seismic test reports Applications Windows Doors Fences Ventilated facades Cladding Metal framing Insulation supports Metal brackets and cross members ds: dsc: kts: B-LONG universal construction plug with collar, hexagon with Torx connection 10x230/180 HS SW13 TX40 kpn: 567977 kpn_dash: kpn_clear: 567977 bkpn: SPIT 567977 bkpn_clear: SPIT 567977 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit plugs and covers / Spit wall plug sr_no_br_cl_ns: 567977 sr_ns: SPIT567977
r: 03320201 p: 3.92 pid: 178034 b: TEC7 q: 0 st: lt: 8 ean: 5414195022580 sr: TEC7 591823290 sr_no_br: 591823290 sr_no_br_cl: 591823290 sr_cl: TEC7591823290 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 13-16 mm Length (Wall plug) 100 mm n: TEC7 591823290 anchor plug with harpoon hooks M13 (12 pcs.) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description ANCHOR PLUG WITH HARPOON HOOKS Anchor plug with harpoon hooks For firm anchoring with Anchor The Anchor plug increases effectiveness and reduces consumption when anchoring in hollow materials Available in two sizes: Anchor plug 13mm: for bolts or threaded rods with diameters of 6 to 11 mm, for drill holes with diameters of 13 to 16 mm. Anchor plug 15 mm: for bolts or threaded rods with a diameter of 10 to 13 mm, for drill holes with a diameter of 15 to 18 mm ds: dsc: kts: anchor plug with harpoon hooks M13 (12 pcs.) kpn: 591823290 kpn_dash: kpn_clear: 591823290 bkpn: TEC7 591823290 bkpn_clear: TEC7 591823290 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Tec7 / Tec7 fasteners and machine components / Tec7 fasteners / Tec7 plugs and covers / Tec7 wall plug sr_no_br_cl_ns: 591823290 sr_ns: TEC7591823290
r: 02890458 p: 3.83 pid: 176042 b: FISCHER q: 0 st: lt: 8 ean: 4048962181029 sr: FISCHER 522727 sr_no_br: 522727 sr_no_br_cl: 522727 sr_cl: FISCHER522727 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 230 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40; HEX 13 mm Drilling diameter 10 mm n: FISCHER 522727 construction plug SXRL 10 x 230 FUS hexagon head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL FUS is approved along with the fischer hexagon head screw with moulded washer and integrated bit holder TX40 for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings of façade, ceiling and roof substructures made of metal. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 or 90 mm for SXRL 8 and SXRL 10 and 70 or 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 240 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 10 x 230 FUS hexagon head kpn: 522727 kpn_dash: kpn_clear: 522727 bkpn: FISCHER 522727 bkpn_clear: FISCHER 522727 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 522727 sr_ns: FISCHER522727
r: 08134133 p: 3.69 pid: 176394 b: FISCHER q: 0 st: lt: 8 ean: sr: FISCHER 542801 sr_no_br: 542801 sr_no_br_cl: 542801 sr_cl: FISCHER542801 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 12 mm Length (Wall plug) 60 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Cavity wall plug With screw Yes With collar No Application General n: FISCHER 542801 Hollow wall plug DuoTec 12 (2 pcs) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The assembly-friendly solution for heavy loads in sheet metal. A combination of two material components for more power. The flange sleeve reinforces the drill hole and enables significantly higher transverse forces. The curved handle enables obstacle detection before starting assembly. The flexible screw fastening allows the use of screws and hooks with different thread shapes. The fibreglass-reinforced plastic and metal insert (fischer DuoTec 12) ensure the absorption of high tensile and transverse forces in all types of board material. The soft, grey nylon contact side distributes the load over the entire panel surface, thus minimising any weakening of the load-bearing building material. Common borehole diameters and a short rocker element ensure easy mounting even in small or insulated hollow spaces. The white flange sleeve with locking function ensures fast and secure mounting of the plug in the drilled hole. With scale on the band (fischer DuoTec 12) for determining the required screw length (scale value + 20 mm). The unique action and the geometry of the fischer DuoTec's plug allow for extremely heavy loads for rocker plugs. This reduces the number of fasteners in multiple fastenings and maximises safety. As part of the DuoLine, the DuoTec consists of two plastic components. The red and hard component of the plug's sleeve enables the uniform distribution of the load, while the grey and white prevent damage to the surface of the board during fastening and thus a load reduction. In applications in board materials, which have a hollow space behind them, the DuoTec is applied as a tumbling plug. In solid building materials, the plug can also be used as a spreader plug. Applications Suspended kitchen cabinets Wall cabinets Bookshelves Wardrobes Handrails Paintings Mirrors Lamps Heavy hanging baskets Building materials Suitable for: Plasterboard Gypsum fibreboard Wooden panels (e.g. OSB, chipboard, MDF, etc.) Steel plate Plastic sheets Concrete hollow brick Also suitable for: Solid materials such as concrete and wood ds: dsc: kts: Hollow wall plug DuoTec 12 (2 pcs) kpn: 542801 kpn_dash: kpn_clear: 542801 bkpn: FISCHER 542801 bkpn_clear: FISCHER 542801 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 542801 sr_ns: FISCHER542801
r: 02630048 p: 3.57 pid: 176195 b: FISCHER q: 0 st: lt: 6 ean: 4048962180817 sr: FISCHER 522706 sr_no_br: 522706 sr_no_br_cl: 522706 sr_cl: FISCHER522706 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 230 mm Drill hole depth 240 mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40 Drilling diameter 10 mm n: FISCHER 522706 construction plug SXRL 10 x 230 T countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL-T is approved along with the fischer countersunk head screw with TX40 drive for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings in internal areas such as windows, coat racks, wall cupboards, or TV consoles. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 and 90 mm for SXRL 8 and SXRL 10 and 70 and 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 290 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 10 x 230 T countersunk head kpn: 522706 kpn_dash: kpn_clear: 522706 bkpn: FISCHER 522706 bkpn_clear: FISCHER 522706 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 522706 sr_ns: FISCHER522706
r: 02697199 p: 3.39 pid: 16393 b: SPIT q: 0 st: lt: 6 ean: 3439515666796 sr: SPIT 566679 sr_no_br: 566679 sr_no_br_cl: 566679 sr_cl: SPIT566679 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length (Wall plug) 210 mm Material (wall plug) Plastic Wall plug type Hammer-in plug With screw Yes Application Brick; Aerated concrete type (screw head) T40; Spanner size 17 mm Drilling diameter 12 mm n: SPIT 566679 PROLONG universal construction plug with countersunk head 12x210/140H (SW17 + washer) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description Universal construction plug with hexagonal head Frame anchor especially designed for hollow materials ETA-approved for fixings in concrete and masonry Unique design of sleeve and spreader element to reach the second cavity for maximum grip in hollow materials Different lengths and head types available Suitable for use in multiple materials, for a wide range of applications Easy to install Applications Windows Doors Fences Timber frame Cladding Frames Beams ds: dsc: kts: PROLONG universal construction plug with countersunk head 12x210/140H (SW17 + washer) kpn: 566679 kpn_dash: kpn_clear: 566679 bkpn: SPIT 566679 bkpn_clear: SPIT 566679 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit plugs and covers / Spit wall plug sr_no_br_cl_ns: 566679 sr_ns: SPIT566679
r: 08134128 p: 3.32 pid: 176361 b: FISCHER q: 0 st: lt: 8 ean: sr: FISCHER 537264 sr_no_br: 537264 sr_no_br_cl: 537264 sr_cl: FISCHER537264 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Length (Wall plug) 50 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Cavity wall plug With screw Yes With collar Yes Application General n: FISCHER 537264 Hollow wall plug DuoTec 10 RH with round hook (2 pcs) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description User-friendly nylon hollow wall plug for high loads in all sheet material types Combination of two material components for improved performance. Equipped with matching round hook. The recessed sleeve reinforces the drill hole and allows significantly higher transverse loads. Curved pull band allows detection of obstacles behind the plate before mounting. Flexible screw mounting allows the use of screws and hooks with different thread shapes. Glass fibre-reinforced plastics and a metal skeleton insert ensure high tensile and transverse loads in all sheet material types. The grey, soft nylon contact surface distributes the load over the panel surface, preventing weakening of the supporting building material. Standard borehole diameters and a compact tilt anchor ensure easy installation in narrow cavities, even in the presence of insulation. The white recessed sleeve with click function allows quick and safe pre-installation in the drilled hole. Equipped with a length indicator on the tension band for determining the required screw length (scale value + 20 mm). Thanks to the unique operation and geometry of the toggle, the DuoTec, as a gravity plug, can take exceptionally high loads. In applications with multiple fastening points, this allows the number of fasteners required to be reduced while maximising safety. As part of the DUO line, the DuoTec consists of two plastic components: the red, hard part of the plug sleeve ensures even load distribution. The grey, soft part prevents damage to the plate surface by the attachment and thus reduces the point load. The DuoTec is installed as a gravity plug in sheet material, but is also suitable as a spreading plug in solid building materials. Applications Suspended kitchen cupboards Living room cabinets Shelves Cloakroom cabinets Handrails Photos Mirrors Lamps Heavy hanging baskets Building materials Suitable for: Plasterboard Gypsum fibreboard Wooden panels, such as OSB boards, chipboard, MDF boards Steel plates Plastic boards Hollow concrete blocks Also works in: Solid materials, such as concrete and wood ds: dsc: Scope of delivery (per purchase of 5) 2x DuoTec 10 2x Round hook 5.0x 84 kts: Hollow wall plug DuoTec 10 RH with round hook (2 pcs) kpn: 537264 kpn_dash: kpn_clear: 537264 bkpn: FISCHER 537264 bkpn_clear: FISCHER 537264 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 537264 sr_ns: FISCHER537264
r: 02454487 p: 3.13 pid: 20992 b: SPIT q: 700 st: 1 lt: 1 ean: 3439515679765 sr: SPIT 567976 sr_no_br: 567976 sr_no_br_cl: 567976 sr_cl: SPIT567976 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length (Wall plug) 200 mm Material (wall plug) Plastic Wall plug type Hammer-in plug With screw Yes Application Brick; Aerated concrete Drilling diameter 10 mm n: SPIT 567976 B-LONG universal construction plug with collar, hexagon with Torx connection 10x200/150 HS SW13 TX40 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description Universal construction plug with collar, hexagon with Torx connection Versatile frame & frame anchor with high performance ETA-approved for fixings in concrete and masonry Uniform expansion prevents rotation during application Short anchor depth: only 40 mm for concrete, therefore less fixing time High load values: up to 220 kg in concrete Extra long lengths: fixing thickness up to 250 mm Suitable for use in multiple materials, for a wide range of applications Easy to install Fire and seismic test reports Applications Windows Doors Fences Ventilated facades Cladding Metal framing Insulation supports Metal brackets and cross members ds: dsc: kts: B-LONG universal construction plug with collar, hexagon with Torx connection 10x200/150 HS SW13 TX40 kpn: 567976 kpn_dash: kpn_clear: 567976 bkpn: SPIT 567976 bkpn_clear: SPIT 567976 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit plugs and covers / Spit wall plug sr_no_br_cl_ns: 567976 sr_ns: SPIT567976
r: 02507973 p: 3.13 pid: 21057 b: SPIT q: 0 st: lt: 6 ean: 3439515666789 sr: SPIT 566678 sr_no_br: 566678 sr_no_br_cl: 566678 sr_cl: SPIT566678 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length (Wall plug) 185 mm Material (wall plug) Plastic Wall plug type Hammer-in plug With screw Yes Application Brick; Aerated concrete type (screw head) T40; Spanner size 17 mm Drilling diameter 12 mm n: SPIT 566678 PROLONG universal construction plug with countersunk head 12x185/115H (SW17 + washer) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description Universal construction plug with hexagonal head Frame anchor especially designed for hollow materials ETA-approved for fixings in concrete and masonry Unique design of sleeve and spreader element to reach the second cavity for maximum grip in hollow materials Different lengths and head types available Suitable for use in multiple materials, for a wide range of applications Easy to install Applications Windows Doors Fences Timber frame Cladding Frames Beams ds: dsc: kts: PROLONG universal construction plug with countersunk head 12x185/115H (SW17 + washer) kpn: 566678 kpn_dash: kpn_clear: 566678 bkpn: SPIT 566678 bkpn_clear: SPIT 566678 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit plugs and covers / Spit wall plug sr_no_br_cl_ns: 566678 sr_ns: SPIT566678
r: 02507972 p: 2.96 pid: 21556 b: SPIT q: 0 st: lt: 6 ean: 3439515666772 sr: SPIT 566677 sr_no_br: 566677 sr_no_br_cl: 566677 sr_cl: SPIT566677 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length (Wall plug) 165 mm Material (wall plug) Plastic Wall plug type Hammer-in plug With screw Yes Application Brick; Aerated concrete type (screw head) T40; Spanner size 17 mm Drilling diameter 12 mm n: SPIT 566677 PROLONG universal construction plug with countersunk head 12x165/95H (SW17 + washer) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description Universal construction plug with hexagonal head Frame anchor especially designed for hollow materials ETA-approved for fixings in concrete and masonry Unique design of sleeve and spreader element to reach the second cavity for maximum grip in hollow materials Different lengths and head types available Suitable for use in multiple materials, for a wide range of applications Easy to install Applications Windows Doors Fences Timber frame Cladding Frames Beams ds: dsc: kts: PROLONG universal construction plug with countersunk head 12x165/95H (SW17 + washer) kpn: 566677 kpn_dash: kpn_clear: 566677 bkpn: SPIT 566677 bkpn_clear: SPIT 566677 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit plugs and covers / Spit wall plug sr_no_br_cl_ns: 566677 sr_ns: SPIT566677
r: 08134130 p: 2.9 pid: 176402 b: FISCHER q: 0 st: lt: 8 ean: 4048962267440 sr: FISCHER 539027 sr_no_br: 539027 sr_no_br_cl: 539027 sr_cl: FISCHER539027 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Length (Wall plug) 50 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Cavity wall plug With screw Yes With collar Yes Application General n: FISCHER 539027 Hollow wall plug DuoTec 10 S PH with round head screw (2 pcs) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The assembly-friendly solution for heavy loads in sheet metal. A combination of two material components for more power. The flange sleeve reinforces the drill hole and enables significantly higher transverse forces. The curved handle enables obstacle detection before starting assembly. The flexible screw fastening allows the use of screws and hooks with different thread shapes. The fibreglass-reinforced plastic and metal insert ensure the absorption of high tensile and transverse forces in all types of sheet material. The soft, grey nylon contact side distributes the load over the entire sheet surface, minimising any weakening of the supporting building material. Common borehole diameters and a short rocker element ensure easy installation even in small or insulated hollow spaces. The white flange sleeve with locking function ensures fast and secure mounting of the plug in the drilled hole. With scale on the band for determining the required screw length (scale value + 20 mm). The unique functioning and the geometry of the fischer DuoTec plug allow for extremely heavy loads for rocker plugs. This reduces the number of fasteners in multiple fastenings and maximises safety. As part of the DuoLine, the DuoTec consists of two plastic components. The red and hard component of the plug's sleeve enables the uniform distribution of the load, while the grey and white prevent damage to the surface of the board during fastening and thus a load reduction. In applications in board materials, which have a hollow space behind them, the DuoTec is applied as a tumbling plug. In solid building materials, the plug can also be used as a spreader plug. Applications Suspended kitchen cabinets Wall cabinets Bookshelves Wardrobes Handrails Paintings Mirrors Lamps Heavy hanging baskets Building materials Suitable for: Plasterboard Gypsum fibreboard Wooden panels (e.g. OSB, chipboard, MDF, etc.) Steel plate Plastic sheets Concrete hollow brick Also suitable for: Solid materials such as concrete and wood ds: dsc: Scope of delivery 2x DuoTec 10 2x screw with cylinder head 5.0x 60 kts: Hollow wall plug DuoTec 10 S PH with round head screw (2 pcs) kpn: 539027 kpn_dash: kpn_clear: 539027 bkpn: FISCHER 539027 bkpn_clear: FISCHER 539027 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 539027 sr_ns: FISCHER539027
r: 02678256 p: 2.81 pid: 176204 b: FISCHER q: 0 st: lt: 6 ean: 4006209786635 sr: FISCHER 78663 sr_no_br: 78663 sr_no_br_cl: 78663 sr_cl: FISCHER78663 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 43 mm Drill hole depth 50 mm Material (wall plug) Brass Wall plug type Brass plug With screw No With collar No Application Concrete type (screw head) Drilling diameter 20 mm n: FISCHER 78663 brass plug MS 16 x 43 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The brass expansion fixing with metric thread. The fischer brass fixing MS is an expansion plug made of brass for holding a metric thread. The special fixing is set in the pre-positioned installation. When driving in the screw or the threaded rod the brass fixing expands and anchors itself in the drill hole. Above all, the fischer brass fixing MS is suitable for fixing shelves, flow heaters, and aggregates in solid building materials. Fast installation due to compact design No rotation due to non-slip surface structure Flexibility due to using conventional screws and threaded rods Surface flush removal possible The compact design of the brass fixing reduces the amount of drilling required, helping to ensure a fast installation The special surface structure of the MS prevents the fixing from rotating in the drill hole. This provides increased installation safety The internal thread allows for the use of standard metric screws or threaded rods, and for surface flush removal and reuse of the fixing point. This provides great flexibility Suitable for The MS brass fixing is suitable for pre-positioned and push-through installation Turning in the metric screw causes the front part of the brass fixing to expand, thus securely anchoring it in the substrate Calculating screw length for flush fixing installation: Fixing length + fixture thickness = min. screw length Suitable for metric screws and threaded bolts The brass fixing may have to be expanded slightly before installation by turning in the threaded screw Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick Application Cellar shelves Substructures made of wood and metal Boilers Aggregates Control boxes Curtain rails ds: dsc: kts: brass plug MS 16 x 43 kpn: 78663 kpn_dash: kpn_clear: 78663 bkpn: FISCHER 78663 bkpn_clear: FISCHER 78663 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 78663 sr_ns: FISCHER78663
r: 02507971 p: 2.73 pid: 21548 b: SPIT q: 0 st: lt: 6 ean: 3439515666765 sr: SPIT 566676 sr_no_br: 566676 sr_no_br_cl: 566676 sr_cl: SPIT566676 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length (Wall plug) 145 mm Material (wall plug) Plastic Wall plug type Hammer-in plug With screw Yes Application Brick; Aerated concrete type (screw head) T40; Spanner size 17 mm Drilling diameter 12 mm n: SPIT 566676 PROLONG universal construction plug with countersunk head 12x145/75H (SW17 + washer) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description Universal construction plug with hexagonal head Frame anchor especially designed for hollow materials ETA-approved for fixings in concrete and masonry Unique design of sleeve and spreader element to reach the second cavity for maximum grip in hollow materials Different lengths and head types available Suitable for use in multiple materials, for a wide range of applications Easy to install Applications Windows Doors Fences Timber frame Cladding Frames Beams ds: dsc: kts: PROLONG universal construction plug with countersunk head 12x145/75H (SW17 + washer) kpn: 566676 kpn_dash: kpn_clear: 566676 bkpn: SPIT 566676 bkpn_clear: SPIT 566676 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit plugs and covers / Spit wall plug sr_no_br_cl_ns: 566676 sr_ns: SPIT566676
r: 02890457 p: 2.68 pid: 176046 b: FISCHER q: 0 st: lt: 8 ean: 4048962181012 sr: FISCHER 522726 sr_no_br: 522726 sr_no_br_cl: 522726 sr_cl: FISCHER522726 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 200 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40; HEX 13 mm Drilling diameter 10 mm n: FISCHER 522726 construction plug SXRL 10 x 200 FUS hexagonal head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL FUS is approved along with the fischer hexagon head screw with moulded washer and integrated bit holder TX40 for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings of façade, ceiling and roof substructures made of metal. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 or 90 mm for SXRL 8 and SXRL 10 and 70 or 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 240 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 10 x 200 FUS hexagonal head kpn: 522726 kpn_dash: kpn_clear: 522726 bkpn: FISCHER 522726 bkpn_clear: FISCHER 522726 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 522726 sr_ns: FISCHER522726
r: 02469119 p: 2.62 pid: 21039 b: SPIT q: 0 st: lt: 6 ean: 3439515666758 sr: SPIT 566675 sr_no_br: 566675 sr_no_br_cl: 566675 sr_cl: SPIT566675 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length (Wall plug) 120 mm Material (wall plug) Plastic Wall plug type Hammer-in plug With screw Yes Application Brick; Aerated concrete type (screw head) Spanner size 17 mm Drilling diameter 12 mm n: SPIT 566675 PROLONG universal construction plug with countersunk head 12x120/50H (SW17 + washer) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description Universal construction plug with hexagonal head Frame anchor especially designed for hollow materials ETA-approved for fixings in concrete and masonry Unique design of sleeve and spreader element to reach the second cavity for maximum grip in hollow materials Different lengths and head types available Suitable for use in multiple materials, for a wide range of applications Easy to install Applications Windows Doors Fences Timber frame Cladding Frames Beams ds: dsc: kts: PROLONG universal construction plug with countersunk head 12x120/50H (SW17 + washer) kpn: 566675 kpn_dash: kpn_clear: 566675 bkpn: SPIT 566675 bkpn_clear: SPIT 566675 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit plugs and covers / Spit wall plug sr_no_br_cl_ns: 566675 sr_ns: SPIT566675
